Database Info

[ROM] [Froyo] AhmgskMod FroyoSenseV1 [9th July]

1st Of all Thanks to DJ Droid For Rom + Radio
+++++++++++++++++++++++++++++++++++
And Then Thanks To Paul, and Others For Root and Hacks
+++++++++++++++++++++++++++++++++++++++++++
And Last But Not The Least Thanks To U ALL
++++++++++++++++++++++++++++++++++​
Disclaimer:
============
I M Not Responsible For Any Damage Caused To U Or Ur Phone While Using This Release
Welcome To Froyo Sense Version 1
Its based on Dj Droids Froyo sense release V1R1 (Leak Build 2.04.0.0 FRF85B). I have Performed many Optimizations to Rom. I didnot find it to be causing problem But if u find anything Strange in the Rom i.e. Sudden Lag or Force Closes Let me know ASAP.
My computer is Not working i m using my friends Computer, which is with me Only for today. So Testers Be little quick In reviewing the Rom.
battery consumption in Wifi Tether (HTC HOTSPOT) is very High, untill Htc Sources of Kernel are out i would Avoid to work on it.
Details Of Rom:
Everything kept Stock (Extreme Stock)
If this goes good I will release a LITE version too + NON SENSE version all in this post itself
Camcorder supports is 720p
Wifi n Usb Tether Works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 357118
View attachment 357116
Requirement for This Rom:
Rooted Desire
Radio -> 32.41.00.32U_5.08.00.04 -> Installation Process Given In Post 2
How to Flash:
Detail Given In 2nd Post
U can Use My Fake Flash Recovery
BenchMark using diff softwares:
Given in 3rd Post
Download:
FroyoSense V1
My Desire Spec:
BRAVO UNKNOWN SHIP S-ON
HBOOT - 0.75.0000
TOUCH PANEL-SYNT0101
RADIO - 5.08.00.04
Mar 5 2010,21:12:15

How To Flash
Please Note U Need to Have ROOTED DESIRE
If u Already Have Rooted Proceed:
Step 1: Starting Recovery
Download Fake Flash Recovery
Copy it to Root of ur Sd-Card (Root means Main folder)
Turn Off Ur Device
Holding VolumeDown key Press Power key -> u will see white screen With Details of ur device written
Now navigate to Recovery using volume keys and press Power key to select it
Phone will reboot and u will see red triangle with '!' Mark
hold volume up key + power key -> you will see menu
now navigate to Flash update.zip and select using power Key
Recovery will Start
STEP 2: Flashing Rom
You Will have to Clear Rom Data First so
Navigate to WIPE using optical trackball and select using press of optical trackball
Wipe Data/factory rest
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery stats
Wipe Rotate setting
Now Go Back to Main Menu using Volume Down Key
Navigate to USB-MS toggle turn on usb (if u dont have the rom pasted in Sd card root directory)
Paste the rom in Root of directory
Now Navigate to Flash zip from Sdcard -> flash the rom following instructions on screen
IF U HAVE 5.08.00.04 Radio U can reboot and Continue With setting ur Device if u dont go to Step 3
Step 3: Flashing Radio
Navigate to USB-Ms Toogle and paste 32.41.00.32U_5.08.00.04.zip in root of Sd-card
Now Navigate to Flash zip from sdcard
Select 32.41.00.32U_5.08.00.04.zip use trackball to confirm it
now it will ask you to press volumeup + volumedown or press menu key to flash radio press it.
now leave your device do not disturb it (if u disturb it u might brick Ur desire)
it will reboot 2 times (i think if more dont worry) 1 time it will be similar to recovery flashing
once it reboots it will directly lead to rom setup wizard
Enjoy
NOTE:
In complete recovery navigation is done with trackball selection is done by trackball and to go back use volume down key
its better to keep battery Above 50% before flashing radio
memory card should not have any partitions only FAT32

I have used 4 softwares to compare benchmarks
-> as compared to N1 ported Froyo Rom it is very comparative You can compare them ur self i m posting Software names + benchmarks i got with screen shot below:
1. Quadrant Standard
View attachment 357145
2 Linpack For Android
View attachment 357146
3. Neocore with sound ON
4. NenaMark1
a.With No sound 13.1 fps
View attachment 357148
b. With Sound 12.2 fps
All these Softwares are available in Market as For free
Enjoy And report All Bugs and Lags and FC

First here
Thank you.

What are the differences between your ROM and udks?

Trying out right now - seems nice so far

Now everybody is coming with a Sense 2.2 ROM

What's in your ROM? (apps)

493560326 said:
What are the differences between your ROM and udks?
Click to expand...
Click to collapse
Same question. So far I can say it has less RAM consumption.
Wonder if you can have OCUV for the kernel?

My dear ROM COOKER
Are U here?
There is a Mr.Question who wants to know your ROM

493560326 said:
My dear ROM COOKER
Are U here?
There is a Mr.Question who wants to know your ROM
Click to expand...
Click to collapse
yes sir i m here
as i wrote in my 1st post it has all htc apps if this version runs with good speed and without fc i will make a lite version without useless htc apps
i just wanna know my optimizations didnot break anything or it did
if did i will work on work around

OK
Maybe I'll just be waiting for the light ROM
That's what I want most

Sorry but I have a quick noob question. Can't you just remove the .apk files from the zip file before you install it?

Why did you stop using ROM Manager?
I can't even find your old ROM's...
Sent from my HTC Desire using XDA App

Please can you make rom without HTC Sense and other HTC Stuff
Thanks in advance

old app2sd (ext3 partition) is present?

thank you ... downloading .... this one don't have unknown reason reboot ?

flashed the ROM....
will give feedback a little later....
btw: the annoying bootsound is there.....please can you remove that from the rom......I think many people don't like that...

how do i get around the simlock when i flash this radio
am an orange uk user

goges said:
thank you ... downloading .... this one don't have unknown reason reboot ?
Click to expand...
Click to collapse
non experienced by me
toosif said:
flashed the ROM....
will give feedback a little later....
btw: the annoying bootsound is there.....please can you remove that from the rom......I think many people don't like that...
Click to expand...
Click to collapse
yes it was kept as stock as i could if this goes perfect i m preparing for lite version with everything lite
u can say this is pre-release

[How-TO] activate sweep2wake on htc sensation

I AM TAKING NO OWNERSHIP FOR ANY OF THE CURRENT CONTENT OF THIS THREAD, NOR AM I CLAIMING IT TO BE OF MY CREATION
hello this is my first Thread on Xda. and today im going to show you guys how to activate sweep2wake function on htc sensation.
i've tried this with some kernels only such as (SebastianFM kernel , and buce's and stock android kernel) you can try this method with any kernel you want.
Let's Get to it
1. of course you must have rooted htc sensation with recovery: 4ext for example.
2. you must have file manager , i use Es file Explorer.
3. open the Es File Explorer just like the picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and now press on the " Favorites " and choose " / " which have mobile phone icon.
and now choose " System ".
now press on " etc " folder..
and press on " init.d " folder..
now search in these files for the kernel text.
and in my case the kernel text is: 01member.bak ... now press on it and open it as " Text " .
do you see the " SWEEP2WAKE " text ?
that's what you are going to edit.
now change the: SWEEp2WAKE=0 from 0 (which means it's OFF) to 1 (it means ON) or to 2 (on with no lights).
it's your choice !
now you just press on power button and Reboot into the recovery and fix permissions (restart the device into the recovery) the device.

Hey thanks for this! But, I found my SWEEP2WAKE=0 thingy in a file called 89bruce and I tried changing the zero to 1 it said that the operation failed! I tried several editors and none of em' worked :\ Can you help me?

Mrgrey44 said:
Hey thanks for this! But, I found my SWEEP2WAKE=0 thingy in a file called 89bruce and I tried changing the zero to 1 it said that the operation failed! I tried several editors and none of em' worked :\ Can you help me?
Click to expand...
Click to collapse
In my case you have to go to the ES Explorer SETTINGS and there to ROOT - Settings and check all the Boxes

ow1166 said:
In my case you have to go to the ES Explorer SETTINGS and there to ROOT - Settings and check all the Boxes
Click to expand...
Click to collapse
Thanks a lot Works great now!

No kernel file
I don't have a kernel file in that folder, despite having the Komodo kernel with CM10, on my HTC Sensation XE.
r12500 said:
I AM TAKING NO OWNERSHIP FOR ANY OF THE CURRENT CONTENT OF THIS THREAD, NOR AM I CLAIMING IT TO BE OF MY CREATION
hello this is my first Thread on Xda. and today im going to show you guys how to activate sweep2wake function on htc sensation.
i've tried this with some kernels only such as (SebastianFM kernel , and buce's and stock android kernel) you can try this method with any kernel you want.
Let's Get to it
1. of course you must have rooted htc sensation with recovery: 4ext for example.
2. you must have file manager , i use Es file Explorer.
3. open the Es File Explorer just like the picture:
and now press on the " Favorites " and choose " / " which have mobile phone icon.
and now choose " System ".
now press on " etc " folder..
and press on " init.d " folder..
now search in these files for the kernel text.
and in my case the kernel text is: 01member.bak ... now press on it and open it as " Text " .
do you see the " SWEEP2WAKE " text ?
that's what you are going to edit.
now change the: SWEEp2WAKE=0 from 0 (which means it's OFF) to 1 (it means ON) or to 2 (on with no lights).
it's your choice !
now you just press on power button and Reboot into the recovery and fix permissions (restart the device into the recovery) the device.
Click to expand...
Click to collapse

sytauro said:
I don't have a kernel file in that folder, despite having the Komodo kernel with CM10, on my HTC Sensation XE.
Click to expand...
Click to collapse
u can try bruce's kernel or sultan's but i won't recommend it cause it's a battery drinker

Hii, there is no ROOT - Settings in esfile.
what can i do to edit the kenrel script?

shahar91 said:
Hii, there is no ROOT - Settings in esfile.
what can i do to edit the kenrel script?
Click to expand...
Click to collapse
yes there is
open es file explorer
press menu button
choose root explorer
choose mount R/W
then put system at RW

rzr86 said:
yes there is
open es file explorer
press menu button
choose root explorer
choose mount R/W
then put system at RW
Click to expand...
Click to collapse
http://img842.imageshack.us/img842/3324/screenshot2013050717191.png
http://img268.imageshack.us/img268/3324/screenshot2013050717191.png

shahar91 said:
http://img842.imageshack.us/img842/3324/screenshot2013050717191.png
http://img268.imageshack.us/img268/3324/screenshot2013050717191.png
Click to expand...
Click to collapse
not there exactly
i forgot to tell you one more step too sorry
after pressing menu button you will see tools
press it
then root explorer etc...

rzr86 said:
not there exactly
i forgot to tell you one more step too sorry
after pressing menu button you will see tools
press it
then root explorer etc...
Click to expand...
Click to collapse
Great!!! thanks man it's work.
I wasnt know that I can give permission ES file!!

shahar91 said:
Great!!! thanks man it's work.
I wasnt know that I can give permission ES file!!
Click to expand...
Click to collapse
i was searching for that too after the last update of the app
i am using the same file explorer
and i was wondering how the previous versions had root permissions from settings and the latest one didn't have?
i was trying to find it from settings too
and then i thought to check the other options
when i saw root explorer i said here we are hehe

rzr86 said:
i was searching for that too after the last update of the app
i am using the same file explorer
and i was wondering how the previous versions had root permissions from settings and the latest one didn't have?
i was trying to find it from settings too
and then i thought to check the other options
when i saw root explorer i said here we are hehe
Click to expand...
Click to collapse
I dont know why I didnt see this because I open tool. soo blind.

i use this app and it works like a charm
https://play.google.com/store/apps/details?id=pt.fjss.s2w
Just hit that thanks button
Sent from my HTC Sensation Z710e with Cyanogenmod 10.1

Working well on Sensation XE with 4.3 Pac-Man's 05/09/2013 build. Thanks a lot, it was SO simple!

[GUIDE] Make softkeys smalled ROOT required

First of all. Thank to byrdmang2 as he helped me out to achieve this.
Honestly i think that the softkeys embeded in the screen is a waste of screen area. So i like them smaller. Here's a screenshot of the final result. This guide is for KitKat, i guess you can make it work on 4.2.2 with GravityBox for JB.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What you need:
- Moto x (obviously)
- ROOTED
- Xposed Framework
- Gravity Box Module
1) Backup your current ROM in custom recovery.
2) Download Xposed Framework here:
http://dl.xposed.info/latest.apk (original thread in http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401) I recommend you to read the whole post.
3) Install it and reboot.
4) Download Gravity box here:
http://forum.xda-developers.com/xposed/modules/app-gravitybox-v2-9-1-tweak-box-android-t2554049 (download in the 2nd post, still read the whole post)
5) Install it and reboot
6) Open gravity box and go to "Navigation Bar Tweaks"
7) Turn the Master Switch ON and enable navigation bar.
8) In the bottom there's a section named "Dimensions" there you can set the height and width (my setting is in 65% but you can make it as small as you like)
9) Reboot
10) Enjoy!

Does anyone know how to make the softkeys as dots?
MOTO X SLAPPED

[email protected] said:
Does anyone know how to make the softkeys as dots?
MOTO X SLAPPED
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.janis605.softkeyz

I disable mine completely and use pie controls instead.

nhizzat said:
I disable mine completely and use pie controls instead.
Click to expand...
Click to collapse
Yup. This is what I do as well. I edit the build.prop file and take the navigation keys completely out. Then I install LMT Pie controls. Although, in the past it was always a PITA doing a factory reset because the navigation keys don't come back. I did however remedy that with creating a flashable zip of LMT that can be done via TWRP. It restores your Pie controls as you had them set.

good tip i will make a guide of how to add the menu button in nav bar of stock rom editing the SystemUI

It's actually fairly easy. All you do is add the line: "qemu.hw.mainkeys 1" to the build.prop and it removes the Nav keys.
I've been using Build Prop Editor from the Play Store for a few years now and it works well.
So, if you are using that app it would look like this:
Property Name = qemu.hw.mainkeys
Property Vaule = 1
Then save it and reboot your phone. Just remember if you do a factory reboot or take an update you will lose your PIE controls and will need to remove the "1" and change it to a "0" to get your Nav keys back. Or, do like I did and use App2Zip and make LMT Pie Controls flashable so you can restore them via recovery. Otherwise you'll need to redownload and reinstall it.

thanks a lot, looks great at 65%

yaldren said:
thanks a lot, looks great at 65%
Click to expand...
Click to collapse
No problem man

The Tallest said:
It's actually fairly easy. All you do is add the line: "qemu.hw.mainkeys 1" to the build.prop and it removes the Nav keys.
I've been using Build Prop Editor from the Play Store for a few years now and it works well.
So, if you are using that app it would look like this:
Property Name = qemu.hw.keys
Property Vaule = 1
Then save it and reboot your phone. Just remember if you do a factory reboot or take an update you will lose your PIE controls and will need to remove the "1" and change it to a "0" to get your Nav keys back. Or, do like I did and use App2Zip and make LMT Pie Controls flashable so you can restore them via recovery. Otherwise you'll need to redownload and reinstall it.
Click to expand...
Click to collapse
I believe it needs to be...
Property Name = qemu.hw.mainkeys
Property Value = 1

edthesped said:
I believe it needs to be...
Property Name = qemu.hw.mainkeys
Property Value = 1
Click to expand...
Click to collapse
That's what I said. You only make it a 0 if you want the Nav keys back.

The Tallest said:
That's what I said. You only make it a 0 if you want the Nav keys back.
Click to expand...
Click to collapse
Yes but it should be MAINkeys not keys as you have written, at least thats what I needed to do to get it to work.
Sent from my SM-P600 using Tapatalk

edthesped said:
Yes but it should be MAINkeys not keys as you have written, at least thats what I needed to do to get it to work.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Oh, I see. Yeah, in the first line of my post I have it as "mainkeys" and then when I broke it down line by line later on in the post it just says "keys". I'll correct it.

Lollipop for samsung galaxy core 2 duos

Hi guys
Came back to xda after long times
Sorry to all my fans
If you like my work do please hit thanks
Now it is a very bad truth that core 2 will never ever get a lollipop official upgrade as its hardware is not going to support lollipop.
So i thought to provide my fans a bit long but trusted way to get a lollipop look,feel,performance on their lazy kitkat devices.
Lets get start
I SUPPOSE THAT YOU HAVE A ROOTED DEVICE. if not then check out my previous guides.
YOUR DROID HAVE ATLEAST 80 % BATTERY.
AND YOU HAVE NO BRAIN
with all this things you arevready to go.
Folllow me boys step by step
1 - UPGRADING LOLLIPOP LAUNCHER
for this we are going to use NOVA LAUNCHER. You can use any lollipop styled launcher for yourself.
Firstly go to es file explorer and onnnnnn the root explorer option.
Then copy the nova launcher apk and past it to /system/priv-app.
After pasting long press it and on right bottom click three dot symbol.head on to permissions and just diasble all exicutable and Botton two write permissions like thisView attachment 3431496
After doing that just delete the default launcher apk and odex file from same folder.
Reboot device and you get the lollipop launcher.
2 - UPGRADING LOLLIPOP KEYBOARD
for this we are going to use latinimegoogle keyboard.
Firstly go to es file explorer and onnnnnn the root explorer option.
Then copy the apk and past it to /system/app.
After pasting long press it and on right bottom click three dot symbol.head on to permissions and just diasble all exicutable and Botton two write permissions like thisView attachment 3431496
Then copy the lib and past it to /system/lib.
After pasting long press it and on right bottom click three dot symbol.head on to permissions and just diasble all exicutable and Botton two write permissions like
thisView attachment 3431496
After doing that just delete the default samsung keyboard apk and odex file from same folder.
Reboot. After rebooting go to settings of keyboard as usually and go to advance section there you will find that material theme option.choose material theme for lollipop look.
Apk and lib files are on this link
Apk https://drive.google.com/file/d/0ByZiuaK2U388UTQ0dkJlc2RaZ2c/view?usp=docslist_api
Lib https://drive.google.com/file/d/0ByZiuaK2U388ZGZVMFFrVk03RFU/view?usp=docslist_api
3 - UPGRADING LOLLIPOP LOCKSCREEN
just follow all instructions which you used for launcher.but you do nat have any specific apk for lockscreen in samsung devicea so you do not need to delete any apk.
Download any lockscreen from market of your choice.
Make shure you have changed file permissions.
4 - UPGRADING LOLLIPOP NOTIFICATIONS
all love heads up notification.
For that you need to download two akp
Xposed installer and its module " heads up notifier" both are in apk form so for both files follow the same instructions as launcher but again you do naot have to delete any apk at last.
Remember the correct permissions.
After rebooting just open xposed framwork and click on modules and enable the notifier module.come back to main menu and click framework and click on install and it will ask for rebooting.after reboot younwill have heads up notifications enabled.
5 - UPGRADING CORE 2 DISPLAY
now a bit different thing.
Open es file explorer and navigate to /system/build.prop.
Open this file.
Tap on the pencil on right top.
Now you will see a line ending with 4.4.2 just change it to 5.2.0
There are two lines saying ro.sf.lcd_density 240 change the value to 200 in both the lines
There are lines like
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=68m
dalvik.vm.heapsize=94m
Change them to
dalvik.vm.heapstartsize=10m
dalvik.vm.heapgrowthlimit=68m
dalvik.vm.heapsize=256m
Done save changes and reboot
Your device now is mostly like lollipop and you have a 20% boosted performance device which eats less battery when in power saving mode.
6 - UPGRADING LOLLIPOP STATUS BAR ICONS
You can download xstana module of xposed installer.install it on your device and tap on notification in status bar after rebooting open the app and choose which style you want.
Follow the same launcher guide above but you dont have to delete any app.
NOW FOR IF YOU WANT TO HAVE A NAVIGATION BAR IN YOUE DEVICE YOU HAVE TO EDIT YOUR BUILD.PROP AND ADD A LINE AT ITS END
qemu.hw.mainkeys = 0
After saving fild just reboot and you will get mavigation r right at botton.
This is a screen shot of my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At last but not least i did not steal any work.this is my original idea but i have not developed the apps you can always donate the creaters of apps.they have done a good job i just assembeled the whole in one device for their combined look.
If you have any problem you can contack me
My gmail is [email protected]
You can send message at hangouts.
Please if you like my work please hit thanks
Good luck guys.
Peace

Full Screen Gestures On Redmi Note 4

Hello Guys, this Guide is for those who are on Beta Miui Rom,Eu ane Miui pro Rom (May work on stable ROMs) and want Full Screen Display or On-Screen Navigation Bar for your Redmi Note 4 or other Mi phones
DISCLAIMER: :angel: I will not responsible if anything goes wrong like bricked or bootloop of your mobile due to your stupidity
REQUIREMENTS:
1) Any Root File Manager (Here ES file explorer) or Build Prop Editor
Note: Mount the system from the Root Explorer option in ES Explorer
CAUTION: Editing system files is harmful, do it at your own risk.
GUIDE:
STEP 1 - Enabling Software keys or Full Screen Display Gestures
1. Open ES File Explorer, tap the menu icon from top left corner and expand Tools. In tools, enable the ‘Root Explorer’ option and grant full root access to ES explorer when prompted.
2. In ES explorer, open the Device (/) directory from Menu > Local > Device. Go to system folder and open the build.prop file with ES note editor.
3. Edit the file by selecting the edit option from top right corner. Then scroll down to the bottom and add the line qemu.hw.mainkeys=0
4. In Build Prop Editor Add Line as 'qemu.hw.mainkeys' and value as 0
5. Go back and select ‘Yes’ to save the build.prop file.
6. Reboot the phone.
NOTE: If you see the on-screen keys only then proceed to next step, otherwise check it by alternate methods mention...
STEP 2 - Enable Full Screen Display Gestures
1) Go to Settings, there will be option as Full Screen Display, Tap it
2) There will be 2 options of Buttons and FSG, Tap on FSG
NOTE: If you want FSG with hardware buttons then don't proceed, enjoy FSG on Miui
STEP 3 - Disabling Hardware Keys
1) Open ES file explorer, go to Device > system > usr > keylayout directory. Open the file “ft5x06_ts.kl”, open it as Text and then select ES note editor. Edit the file and simply add the # prefix in front of the word key for all 4 keys.
In the end of that file there will be following four lines:
key 158 BACK
key 139 MENU
key 172 HOME
key 217 SEARCH
Add a '#' before each line so it would look like this:
#key 158 BACK
#key 139 MENU
#key 172 HOME
#key 217 SEARCH
2) Go back, Save file and Reboot.
3) Hardware Keys should now be disabled.
STEP 4 - Disabling capacitive key lights.
1)Download Capacitive Buttons app from Play Store.
2)Open it and grant root access.
3)Select the first option i.e no brightness.
4)Reboot.
:good::good::good:
All Done!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Will this work on xiaomi.eu??

[email protected] said:
Will this work on xiaomi.eu??
Click to expand...
Click to collapse
yes, definitely it will work on all custom miui rom

I tried to enable full screen gesture a few day ago but I didn't get the option in the settings. All I got was soft navigation keys.
Are you sure that this works on MIUI Global Stable ROM also?

How to disable fullscreen guesture with on screen navigation button back to original setting?

How to get these full screen gestures in aosp extended rom?
Sent from my Redmi Note 4 using Tapatalk

m.nav7854 said:
How to disable fullscreen guesture with on screen navigation button back to original setting?
Click to expand...
Click to collapse
Restore the original build.prop file. Or edit your current build.prop file using the same method and remove the line that you have added.
---------- Post added at 03:44 AM ---------- Previous post was at 03:43 AM ----------
Souptik Mukherjee said:
How to get these full screen gestures in aosp extended rom?
Click to expand...
Click to collapse
You can request this feature from the developers of AEX ROM.

mike_bravo said:
Restore the original build.prop file. Or edit your current build.prop file using the same method and remove the line that you have added.
---------- Post added at 03:44 AM ---------- Previous post was at 03:43 AM ----------
You can request this feature from the developers of AEX ROM.
Click to expand...
Click to collapse
I have added "qemo.hw.mainkeys=0" but in build prop there is another one "qemo.hw.mainkeys=1" shall i remove only one or both?

m.nav7854 said:
I have added "qemo.hw.mainkeys=0" but in build prop there is another one "qemo.hw.mainkeys=1" shall i remove only one or both?
Click to expand...
Click to collapse
Only remove the one that you added yourself.
Don't change anything that was already present before you tempered with it. ?

mike_bravo said:
Only remove the one that you added yourself.
Don't change anything that was already present before you tempered with it. ?
Click to expand...
Click to collapse
Ok

mike_bravo said:
Only remove the one that you added yourself.
Don't change anything that was already present before you tempered with it. ?
Click to expand...
Click to collapse
I have removed added line from build prop but still there is a back guesture. Without any option in setting.

m.nav7854 said:
I have removed added line from build prop but still there is a back guesture. Without any option in setting.
Click to expand...
Click to collapse
Not sure what's wrong. I would suggest you to head over to other forums and see if somebody can help you. Sorry mate.

mike_bravo said:
Not sure what's wrong. I would suggest you to head over to other forums and see if somebody can help you. Sorry mate.
Click to expand...
Click to collapse
No issue.. i like that one.. only back gusture is good.
While other guesture like swipe up from botton was not good. Bcoz when i am typing from gboard keyboard i was not able to touch smace button easily.. but now its fine.. thanks to u..

Can't disable hardware keys

Dont work with new official global rom :/

mike_bravo said:
I tried to enable full screen gesture a few day ago but I didn't get the option in the settings. All I got was soft navigation keys.
Are you sure that this works on MIUI Global Stable ROM also?
Click to expand...
Click to collapse
it's likely is now only available to eu rom and global beta rom

Souptik Mukherjee said:
How to get these full screen gestures in aosp extended rom?
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
not available in aosp rom

m.nav7854 said:
How to disable fullscreen guesture with on screen navigation button back to original setting?
Click to expand...
Click to collapse
remove the line u added in build prop but first change FSG to onscreen navigation button

m.nav7854 said:
I have removed added line from build prop but still there is a back guesture. Without any option in setting.
Click to expand...
Click to collapse
again enable it and then change full screen gesture to onscreen button and then disable it

Guys this feature is only present on beta MIUI and other custom MIUI rom based on latest beta...not on stable MIUI. And this feature is hidden on phone with hardware keys. it is going to be visible by editing build.prop like OP described.
So if u on stable MIUI don't expect this feature to work for u.