Hello. Yesterday i unlocked my bootloader and tried to install kitkat with the t-mobile version on my moto x
However rsd stop at step 6/10 and my moto x is now complete black. When i tried to turn it on, it just vibrates. When i plug it to the charger, it just vibrates too. I can't enter to fastboot or anything.
Its something i can do?
thanks in advance
UPDATE
I keep pushing and pushing power on + volume down and after a few tries the phone starts in fastboot mode. However after a few minutes it shut downs. What can i do?
I havent tried anymore, I just left the phone pluged to the charger hoping the solution is the battery.
Plz excuse my poor english.
Related
Hello guy's i'm new too this site, My moto G has been suffering problems since i installed kitkat . .
I then reinstalled it to stock rom and it was the wrong version, it was for an EE phone were as mine is actually unlocked.
my phone lights up once with the moto g sign when i turn it on and i have seconds to get it into bootloader mode via wallplug.
The problem is i need my bootloader to show on my phones screen when i plug it in the pc but it comes up for like a second and a half then goes off. I have read nearly all these forums and theres not alot i can see about this type of problem so please somebody help.
Also if i get bootloader on the screen via wall plug and try disconnecting to plug in pc it just goes off also. Stuck humm :I(
Ash MOTO G said:
Hello guy's i'm new too this site, My moto G has been suffering problems since i installed kitkat . .
I then reinstalled it to stock rom and it was the wrong version, it was for an EE phone were as mine is actually unlocked.
my phone lights up once with the moto g sign when i turn it on and i have seconds to get it into bootloader mode via wallplug.
The problem is i need my bootloader to show on my phones screen when i plug it in the pc but it comes up for like a second and a half then goes off. I have read nearly all these forums and theres not alot i can see about this type of problem so please somebody help.
Also if i get bootloader on the screen via wall plug and try disconnecting to plug in pc it just goes off also. Stuck humm :I(
Click to expand...
Click to collapse
So, when you press Power + Vol down while connected to a computer nothing happens?
Doesn't make sense that you can only get into download mode when plugged on a wallplug.
How about when you are not plugged in at all? Can you still get into download mode??
neozen21 said:
So, when you press Power + Vol down while connected to a computer nothing happens?
Doesn't make sense that you can only get into download mode when plugged on a wallplug.
How about when you are not plugged in at all? Can you still get into download mode??
Click to expand...
Click to collapse
Nope only with power to it, so if i try bootload it with no power phone will just stay dead and wont register. When i put in the pc and try vol + and power bootloader just flashes on and off once and phone dies so at this point im erm f**ked?
:crying:
Ash MOTO G said:
Nope only with power to it, so if i try bootload it with no power phone will just stay dead and wont register. When i put in the pc and try vol + and power bootloader just flashes on and off once and phone dies so at this point im erm f**ked?
:crying:
Click to expand...
Click to collapse
Hmmm.. Unless you can get into download mode, I'm afraid you are out of luck...
What exactly did you do when you flashed the "stock version for the EE phone? (what does EE mean?)
I don't understand how a ROM for the Moto G can screw up download mode...
Maybe you can try this... http://forum.xda-developers.com/showthread.php?t=2623587
I guess this only works if you have a Moto G that don't want to power on and if you plug in a pc is recognized like "qhsusb_bulk"..
Be sure to read the thread carefully...
And adb doesn't work?
Code:
adb reboot-bootloader
Maybe you need to let it charge, or your battery simply died.... try using a factory cable
If you can reach Bootloader (even in a wallplug) the Bloader isn't failing...
Sounds like a electrical problem
So I tried updating from 4.4.3 to 4.4.4 OTA and for some reason during/after the install the screen went blank and I am now unable to turn the phone on. I tried holding the volume down and power button for two minutes but the screen stays black and I don't get any vibrations. Next I tried disconnecting the battery too and even that didn't fix anything either. I now have no clue what to do!
Anyone?
i'ts happen to me too
Iconic24 said:
Anyone?
Click to expand...
Click to collapse
See this thread http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
you have hardbricked your moto g. its happen because ota try to install bootloader with lower version and fail, causing a corrupted bootloader
i'ts happen to me too, my moto g only blinks the led, and connects on pc via serial port lol
Sorry for my english XD
Hi,
Yesterday my peregrine (moto g lte, running CM12 & twrp 2.8.3.0) shut down for no reason and wasn't able to reboot., it just seemed dead.
After pressing volume down + power for about two minutes, it manages to get into fastboot mode.
At this point, it was detected by the PC as Qualcomm USB something but I wasn't home so I let it this way thinking I would be able to restore the stock firmware later.
Today it's completely dead. It's not detected by any PC (linux/windows) and when I plug it into a PC or the wall charger, there is just the LED that lights on.
Is there anything I can do to revive it ? Do you have any leads ?
Thank you in advance guys
hey guys
my sister moto g is suddenly dead i dont know whats wrong and the recovery not working and not turning on ,just when i plug it to charger its just the LED blinking its like connect and disconnecting the cable , any guess?
Any one have any solution?
tried enter to bootloader menu? what system? BL unlocked?
Hold your power button for 5+ minutes, it should eventually come to life.
plantator said:
tried enter to bootloader menu? what system? BL unlocked?
Click to expand...
Click to collapse
I cant get it boot again, its just led blinking and nothing will happen.
Sent from my HTC One using Tapatalk
Try leave in conected to chargerfor hour or more, change conection cable if have too, then try to turn it on by long pressing power button 120 sec or more
Hey,
I had this problem with my Moto G 2013 (xt1032). I was installing a ROM with TWRP but, unfortunately, the process failed. I decided to leave TWRP and proceed into recovery mode in order to install the stock rom by adb. Right before leaving TWRP, a pop up showed up saying "No OS installed. Are you sure you wish to proceed?" After that, the phone turned off, and I tried going into recovery mode (vol -, power button), and it wasn't working. That was when I found out my phone was dead. I've tried to hold the vol - and the power button for like 2 min and it didn't work. I have also tried the "blank-flash.bat" method but it didn't work as well because there is no OS installed on my phone. I have done lots of research on pushing a ROM but I don't really think that is going to work. If any of you guys can help me on this I would be really glad because I really loved this device. Thanks! (forgot to mention that my PC recognizes my phone and that every time I connect my phone to the USB cable, the LED blinks and every time I hold the power button for 6 seconds, the LED blinks and I think the phone restarts or something.) Finally, thanks for opening my thread and for helping me!