Database Info

[TWRP] TWRP Recovery v2.3.2.3 For Micromax A89

So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Click to expand...
Click to collapse
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
CREDITS GOES TO YUWENG & BHARDIK :highfive:
All Credit goes to yuweng for creating the ROM and BHARDIK who has made CWM for A89 and helped compiling this tutorial.
And GREAT thanks to the Russian Master Shifu Javum, as he is the one that compile TWRP for our MT6577... :good:
Click to expand...
Click to collapse

dan.man said:
So, for installing TWRP you need to follow these steps:
IMP:
[*] You need not to have rooted phone.
[*] This is for MMX A89 ONLY! Don't use for other phones as you can brick it!
[*] Although, this rom has been tested, I'm not responsible for any damage!
Prerequisites :
1. MTK6577 Drivers (Thanks to Bhardik)
2. SP Flash Tool (Thanks to Bhardik)
3. TWRP Itself! (Thanks to yuweng
Now we are ready to Flash!
[IMPORTANT : DISCONNECT YOUR PHONE BEFORE STARTING THIS TUTORIAL]
1. First of all, Download all of the packages listed above.
2. Install Drivers and Extract SP Flash Tools & TWRP image.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted "TWRP for MMX A89-dan.man" folder and select "MT6577_Android_scatter_emmc.txt" file.
Refer this screenshot for more help:
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. [Skip this step if recover.img is already selected] Now to select recovery file, click on recovery and select recovery.img file.
7. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable. Keep those buttons holding while the process is completing.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed TWRP Recovery v2.3.2.3 ! Enjoy!
-------------
Booting into TWRP Recovery v2.3.2.3 is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP Recovery v2.3.2.3!
Here's a screenshot of TWRP working on my A89 :
-------------
Click to expand...
Click to collapse
I use this its awesome

Sir I have rooted my phone micromax q336 with kingroot but unable to flash twrp or any other custom recovery I am not having a pc ko please somebody

[Guide][Updated 2016] Install CM12.1 (Android 5.1.1 Lollipop) on GT-S7582

Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4

Thank you

i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?

did it get completed on odin? Try changing usb cable and usb port

Will it work with cwm
And also is it necessary to download (gapps)

Does it have to be stock frimware so the rom could be installed?

Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/

please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap

How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox

Its not installing . I tried it . Showing an error but gaaps is working.

rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework

munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended

alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work

Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got

Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:

tried that solution but still it shows same error... e unable to mount system

For this do we need to be on CM 11 ????

Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install

abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English

Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.

R06 Release Soon [YOTA3 CUSTOM R05] with google apps and no root

R06 Release soon.
- revert settings app
- introduce E-Ink Launcher & Epd tools
- add no screen time out & rotation app
YOTAPHONE 3 CUSTOM FIRMWARE ROM
R05 Release
- add android system os languages
ja, ko, de, zh, en, etc.
- add Settings translation
ja, ko, de, ... etc
issue:
- some menu font size broken, now show [on/off switch]
- same R04 issue
download link
https://1drv.ms/u/s!Ak8Mx9Xz2kf8b0M0UXQ6zMkLPSU
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
R04 Release
- localize EPD param ( twice touch epd menu button for activate ) - en, ko
- localize gallery3d - ko and recover
etc.
issue :
- first time dialer not auto selected. so setup default phone application manually
- first time chrome not activated. you can start with google app or share function. next time startable.
- EPD keyboard cannot show in chrome webform. this problem is not keyboard's but yota's problem.
R03 Release
- change default phone app to Google Pixel Phone
- EPD keyboard changed to korean epd.
- included notification app
--------------------------------------------------------------------------
R02 Release
i updated custom rom
your phone must be boot loader unlocked.
how to install
use twrp install
download image R02 from url
test zip file first
copy custom rom zip to yotaphone's internal storage root.
power off
connect cable to PC
enter boot loader mode (volume down + power)
run twrp ( fastboot boot twrp_yota3.img)
twrp install and select custom firmware .zip file.
if you first flush custom rom, you shuld data format with twrp
reboot
have good reading.
----------------------------------------------------------------------------------------
-- deprecated --
I modified yotaphone 3 system with twrp
you must unlock boot loader and twrp recovery mode.
R01
google setup wizard
google apps as system app.
support en cn default kr.
eink launcher for epd.
removed blotwares about 35
install step.
you must backup your system.img
copy custom system.img to yota internal sdcard
connect usb cable
power off
volume down + power
fastboot boot twrp_yota3.img
adb shell
dd if=/sdcard/system.yota3.img of=/dev/block/bootdevice/by-name/system
you must foramt data with twrp.
reboot
I am rebuilding epd apps.
current epd today lock have problem.

Hello, joygram.
What is R02 updated than R01? R01 I'm using it. I feel better than the official. It is recommended that the list be moved to some /system/presetapp. by voting.

want to thank you for your job and encourage you to keep impriving the ROM, we really need that.
Thanks man!

more stable and safe install with twrp.
I found epd keyboard's mthod.
but only success korean key board.

Thank you for your work.
I am testing the ROM and seems better than the stock one at the moment. I have one tricky issue Whit the DIALER. I can call but cannot stop it, no red icon.

Please help with one problem.
After install R03 (or R02) custom rom, i cant save anything: photos by camera, whatsapp, anything, but applications downloaded and install well from store.

...also some issues with Facebook app. Trying to upload videos app close and restarting.
If I use the clock instead the default savescreen on e-ink the phone stops working and have to re-install the ROM.

How to get twrp_yota3.img

JimjimB said:
How to get twrp_yota3.img
Click to expand...
Click to collapse
OP Junior Member28 posts Thanks: 6
2018/8/24 add twrp.img to this
https://pan.baidu.com/s/1ezT1OCrOMAzcrYRC5KbmPQ
password: dnjq
code:
fastboot flash recovery rec.img
fastboot flash recoverybp rec.img
(recoverybp is recovery backup)

app phone doesnt display when you make a call, can you fix ?

whynot4444 said:
app phone doesnt display when you make a call, can you fix ?
Click to expand...
Click to collapse
Actually I solved with this dialer:
https://play.google.com/store/apps/details?id=com.hb.dialer.free

whynot4444 said:
app phone doesnt display when you make a call, can you fix ?
Click to expand...
Click to collapse
Settings --> Applications --> Phone，set Phone app to yes , Allow aoll notifications.

lizezhigrass said:
Settings --> Applications --> Phone，set Phone app to yes , Allow aoll notifications.
Click to expand...
Click to collapse
ok it work, thanks, but keyboard at the black screen not show, how to fix it

Link dead
code:
fastboot flash recovery rec.img
fastboot flash recoverybp rec.img
(recoverybp is recovery backup)[/QUOTE]
Hi, could you put TWRP for Yota3 somewhere we can get at it please? Do push notifications work properly with this ROM?
Cheers,
Rob

Link is dead
Hye, great thing. I tried to download the twrp file, but ist doesn´t exitst anymore. I woult be great if i can use the custom rom

Sodasistso said:
Hye, great thing. I tried to download the twrp file, but ist doesn´t exitst anymore. I woult be great if i can use the custom rom
Click to expand...
Click to collapse
2018/8/24 add twrp.img to this
code:
fastboot flash recovery rec.img
fastboot flash recoverybp rec.img
(recoverybp is recovery backup)
Last edited by gor516don; 24th August 2018
REMEMBER to put a PIN before change recovery or install ROMs
https://drive.google.com/open?id=1Ksnqn5dtiYGmdTcL7k2URCG112ZYIuVo

Thanks a lot. What file exactly is this rec.img? Because the whole files on baidu were not accessible, which files do i need in addition?
i want to use twrp and the custom rom.

Hi,
I can't find fastboot driver. When i start normally the phone it's well recognize.
But when I start in the recovery mode I have an error with driver do you know how to install the good driver ?
Thancks in advance

gunnm92 said:
Hi,
I can't find fastboot driver. When i start normally the phone it's well recognize.
But when I start in the recovery mode I have an error with driver do you know how to install the good driver ?
Thancks in advance
Click to expand...
Click to collapse
Try with new adb platform:
https://developer.android.com/studio/releases/platform-tools

Hi,
Thanks for your help but the same issue an exclamation mark appeared in fastboot mode

[RECOVERY] TWRP 3.5.x.x for Samsung Galaxy M115F m11q

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOAD​Thanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07

#reserved

#reserved

Not working:
* recovery loop
* recovery screen touch disabled

salvag said:
Not working:
* recovery loop
* recovery screen touch disabled
Click to expand...
Click to collapse
can you explain me whats not working ?
can you reproduce this error you are facing ?

Hi,
basically what i said:
* i was unable to reboot to system
* i could not enter custom recovery either; the touch screen did not work (the swipe buttom)
I did not try again; I reeinstalled the stock rom and used the magick patch to get root

#reserved

salvag said:
I did not try again; I reeinstalled the stock rom and used the magick patch to get root
Click to expand...
Click to collapse
Yes, it is correct solution!
1. Install a new (latest) firmware /at current moment it is SM-M115F_M115FXXU2BUD9_R(Android 11)_SEK_Factory Rom (5 File)_20210517/.
2. Go to download mode (screenshots in attachment), start Odin, uncheck "Auto Reboot in "Options" and in "AP" put patched file from attachment to this post (magisk_patched-23000_Av3SK.tar).
3. Press start.
4. After finish go to Recovery Mode and run "Wipe data/Factory Reset" and "Wipe cache partition"
5. Reboot.
6. Install Magisk-v23.0.
Enjoy!
N.B. Patched file in attachment work ONLY with firmware that specified above (SM-M115F_M115FXXU2BUD9_R)!!!

@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support

TheDevelopper said:
@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support
Click to expand...
Click to collapse
send logs if you get error

4yush5663 said:
send logs if you get error
Click to expand...
Click to collapse
It's just based on Android 10

stuck on recovery loop not booting to system despite complete wipe

Tolong solisinya, saya sudan install twrp m11 sukses dengan benar, tapi tidak bisa masuk home screen, cuma tampilan android is not runing, itu bagai mana ??

4yush5663 said:
View attachment 5293887
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOAD​Thanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
Click to expand...
Click to collapse
Can I use it for Android 11 updated M11 ??
Please reply and help.

Hari12a said:
Can I use it for Android 11 updated M11 ??
Please reply and help.
Click to expand...
Click to collapse
i am in currently in Android 10 , yes, you can try installing twrp in android 11

4yush5663 said:
i am in currently in Android 10 , yes, you can try installing twrp in android 11
Click to expand...
Click to collapse
I'm not dare to take risk. will it brick by deviice ? i am a noob .so i am so confused

my device is galaxy M11 on android version 11 UI 3.1.

Jalalludin said:
my device is galaxy M11 on android version 11 UI 3.1.
Click to expand...
Click to collapse
You flashed it??

Yes, I successfully flashed it, but the result is that the phone doesn't work, I've formatted the data and wiped the cache

I downgraded my latest firmware to android 10 stock rom (which had bit security level 2 because i couldn't downgrade to versions with bit security less than 2) to make this work, then I was able to flash the recovery by flashing vbmeta first then tried flashing 3.4.x.x as well as 3.5.x.x twrp recovery... I had a problem with /data partition but it was solved by doing nand erase in odin when flashing stock rom... but anyways I don't know if the problem is with modded twrp or unofficial lineageos cause in both versions of twrp I get stuck in bootloop on the lineageos loading...
Hope this helps anyone who comes here like me...

How To Guide Fix Stock ROM not booting on(RMX3370)

WARNING​Do it at your own risk , neither XDA nor me will be responsible for any damage that may occur to you or your device becuase of this guide .
Overview ​You are using Stock ROM with unlocked bootloader and you have messed up the system by removing some apps or services that were necessary for booting . Then follow this guide
Note - If it occured due to some magisk module , proceed to post 2 of this thread and read FAQ .
If you cant even boot the device , black screen no yellow realme logo then this guide cant help you
and you will have to go to service center .
Requirements ​
Bootloader Unlocked Realme GT Neo 2 Indian Variant (Guide Click here )
A PC (windows or linux) with adb- fastboot installed
USB cable
boot.img from Stock Android 11 A07 Indian ROM
TWRP.img thanks to @ SathamHussainM from his thread on the same topic
Downloads​ADB-FASTBOOT setup for windows ( Click here )
TWRP.img file link ( Click here )
Stock Boot Image link ( Click here )
STEPS
​STEP 1)
First step is to Switch off the phone , if it is already switched off skip to Step 2
[If it is stuck in bootloop (yellow realme logo) then
Press volume down + volume up + power button , till the realme logo disappears ,
then quickly release the volume up button and ]​
STEP 2)
Only hold the volume down + power button till the phone reboots , release buttons as soon as you feel vibration .
STEP 3)
You will be greeted with fastboot screen which will look like this
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 4)
Now this is an important step reflash TWRP recovery using fastboot (if you dont know how read this guide )
[ If you don't directly boot to TWRP again then restart into recovery from poweroff mode
by long pressing power and volume down button until
it shows fastboot screen then use volume down button to select recovery it will look like this
Spoiler
then press power button and device will reboot to TWRP ]
​STEP 5)
Now there will be 2 case
a) If TWRP asks for password ,
If you used pin as lock type then enter the lockscreen password ,
if it successfully decrypts data go to Step 6
b) If TWRP dont asks for password or you dont remember or password was a pattern
Skip it , Go to Backup section and see if TWRP is showing Internal Storage as 0Mb if yes then read spoiler below else skip to Step 6
Spoiler
Go to Wipe section of TWRP and do swipe to Factory Reset then select format data , it will ask for confirmation type yes
Now go back to TWRP home screen and select reboot from bottom right corner and then select recovery
Now when you boot back to TWRP , it will not ask for password
Now go to Backup button and it will show Internal storage (103981 MB) this means half of the problem is solved internal storage is decrypted ]
STEP 6)
Now connect your phone to PC and copy boot.img to Internal Storage .
STEP 7)
In TWRP go to install section and tap on Install Image , now select the boot.img and flash it to Boot Partition , If you cant find boot.img then read spoiler else skip to Step 8
Spoiler
go to Advance > File Manager > data> recovery you will find the boot.img tap on it and select move then select sdcard and swipe to confirm file operation Now Go back to TWRP home and select INSTALL and install image slect boot.img you moved here and flash it to BOOT partition .
STEP 8)
After flashing is complete , go to Wipe section and do a factory reset oce more then go to reboot section from TWRP home and select system .
STEP 9)
Your Phone will reboot and after 10-15 minutes your device will show Initial Setup screen.
STEP 10)
Your phone will now boot properly .

Q) How to Boot to recovery using volume buttons ?
Ans) While the Phone is switch off , Press the power button and Volume Down Button continuously until you feel a vibration , then you will be greeted with fastboot screen , If you want to go to recovery mode then press volume down button until the header in fastboot screen starts showing Recovery then press the power button to confirm the reboot to recovery .
Q) Why does my Phone takes too much time to show TWRP home screen after the logo ?
Ans) The recovery is made by @SathamHussainM and I think it is still in beta , So it takes approx 1 minute after TWRP logo appears to show TWRP home screen .
Q) I installed a magisk module and now device is not booting . What should I do now ?
Ans) Reboot to TWRP then go to Advance > File Manager > data > adb > modules
Select that module folder which is causing the problem and delete it , If you don't know which is causing problem just remove all the folders inside the module folder
Now Reboot to system and wait for 1-2 min device should boot properly now .
Q) I can't boot to fastboot mode or Black screen no Logo . What to do now ?
Ans) In this case this guide wont work coz it needs fastbot (bootloader to be unlocked and working )
Please go to Service Center , coz files avaialble for flashing on Internet sites are not verified and they may coz unforeseen problems .

Q) Your guide did not worked for me and I have unlocked bootloader Indian variant GT NEO 2 . What can I do ?
Ans) Very Risky but you can Try to flash this ZIP from TWRP after decrypting your internal storage and Formatting Data partition (using Step 5b from OP ) and immediately after flashing reflash recovery.img to Recovery Partition .
Q) I am unable to copy 4.7 GB zip to Device using MTP through USB cable . Any solution ?
Ans ) Very Risky but you can try Format Data Partition , wipe cache from TWRP and
Copy the ZIP and recovery.img to PenDrive and connect it to phone using OTG adapter and then flash the zip
if flashing is successfull flash the recovery image to Recovery Partition . Reboot the system and hope that it boots {give it time 10 to 15 minute ) , if it does not boots then it is confirmed only solution is Service Centre