WARNINGDo it at your own risk , neither XDA nor me will be responsible for any damage that may occur to you or your device becuase of this guide .
Overview You are using Stock ROM with unlocked bootloader and you have messed up the system by removing some apps or services that were necessary for booting . Then follow this guide
Note - If it occured due to some magisk module , proceed to post 2 of this thread and read FAQ .
If you cant even boot the device , black screen no yellow realme logo then this guide cant help you
and you will have to go to service center .
Requirements
Bootloader Unlocked Realme GT Neo 2 Indian Variant (Guide Click here )
A PC (windows or linux) with adb- fastboot installed
USB cable
boot.img from Stock Android 11 A07 Indian ROM
TWRP.img thanks to @ SathamHussainM from his thread on the same topic
DownloadsADB-FASTBOOT setup for windows ( Click here )
TWRP.img file link ( Click here )
Stock Boot Image link ( Click here )
STEPS
STEP 1)
First step is to Switch off the phone , if it is already switched off skip to Step 2
[If it is stuck in bootloop (yellow realme logo) then
Press volume down + volume up + power button , till the realme logo disappears ,
then quickly release the volume up button and ]
STEP 2)
Only hold the volume down + power button till the phone reboots , release buttons as soon as you feel vibration .
STEP 3)
You will be greeted with fastboot screen which will look like this
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 4)
Now this is an important step reflash TWRP recovery using fastboot (if you dont know how read this guide )
[ If you don't directly boot to TWRP again then restart into recovery from poweroff mode
by long pressing power and volume down button until
it shows fastboot screen then use volume down button to select recovery it will look like this
Spoiler
then press power button and device will reboot to TWRP ]
STEP 5)
Now there will be 2 case
a) If TWRP asks for password ,
If you used pin as lock type then enter the lockscreen password ,
if it successfully decrypts data go to Step 6
b) If TWRP dont asks for password or you dont remember or password was a pattern
Skip it , Go to Backup section and see if TWRP is showing Internal Storage as 0Mb if yes then read spoiler below else skip to Step 6
Spoiler
Go to Wipe section of TWRP and do swipe to Factory Reset then select format data , it will ask for confirmation type yes
Now go back to TWRP home screen and select reboot from bottom right corner and then select recovery
Now when you boot back to TWRP , it will not ask for password
Now go to Backup button and it will show Internal storage (103981 MB) this means half of the problem is solved internal storage is decrypted ]
STEP 6)
Now connect your phone to PC and copy boot.img to Internal Storage .
STEP 7)
In TWRP go to install section and tap on Install Image , now select the boot.img and flash it to Boot Partition , If you cant find boot.img then read spoiler else skip to Step 8
Spoiler
go to Advance > File Manager > data> recovery you will find the boot.img tap on it and select move then select sdcard and swipe to confirm file operation Now Go back to TWRP home and select INSTALL and install image slect boot.img you moved here and flash it to BOOT partition .
STEP 8)
After flashing is complete , go to Wipe section and do a factory reset oce more then go to reboot section from TWRP home and select system .
STEP 9)
Your Phone will reboot and after 10-15 minutes your device will show Initial Setup screen.
STEP 10)
Your phone will now boot properly .
Q) How to Boot to recovery using volume buttons ?
Ans) While the Phone is switch off , Press the power button and Volume Down Button continuously until you feel a vibration , then you will be greeted with fastboot screen , If you want to go to recovery mode then press volume down button until the header in fastboot screen starts showing Recovery then press the power button to confirm the reboot to recovery .
Q) Why does my Phone takes too much time to show TWRP home screen after the logo ?
Ans) The recovery is made by @SathamHussainM and I think it is still in beta , So it takes approx 1 minute after TWRP logo appears to show TWRP home screen .
Q) I installed a magisk module and now device is not booting . What should I do now ?
Ans) Reboot to TWRP then go to Advance > File Manager > data > adb > modules
Select that module folder which is causing the problem and delete it , If you don't know which is causing problem just remove all the folders inside the module folder
Now Reboot to system and wait for 1-2 min device should boot properly now .
Q) I can't boot to fastboot mode or Black screen no Logo . What to do now ?
Ans) In this case this guide wont work coz it needs fastbot (bootloader to be unlocked and working )
Please go to Service Center , coz files avaialble for flashing on Internet sites are not verified and they may coz unforeseen problems .
Q) Your guide did not worked for me and I have unlocked bootloader Indian variant GT NEO 2 . What can I do ?
Ans) Very Risky but you can Try to flash this ZIP from TWRP after decrypting your internal storage and Formatting Data partition (using Step 5b from OP ) and immediately after flashing reflash recovery.img to Recovery Partition .
Q) I am unable to copy 4.7 GB zip to Device using MTP through USB cable . Any solution ?
Ans ) Very Risky but you can try Format Data Partition , wipe cache from TWRP and
Copy the ZIP and recovery.img to PenDrive and connect it to phone using OTG adapter and then flash the zip
if flashing is successfull flash the recovery image to Recovery Partition . Reboot the system and hope that it boots {give it time 10 to 15 minute ) , if it does not boots then it is confirmed only solution is Service Centre
Related
[ROM][PORT][ JB 4.1.2]- MIUI V5 VOLLO VX 98 Unofficial
This rom has been ported for the Device Vollo Vx98 (Chinese smartphone ) , Since I did not like the stock rom of this device andthat inspired me to port the most popular MIUI V5 on this device
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS :
XDA DEVELOPERS
XIAOMI
Rishab Raj for Porting guide
Amit Goyal for testing
Pandawill for base soruce code
Click to expand...
Click to collapse
!!!!DISCLAIMER: Rooting your phone and using custom ROMS have risks, You may brick your device
if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup
of your phone before proceeding ....Blah blah ......blah !!!!!
Click to expand...
Click to collapse
Pre-requisite :
1.Rooted phone.
2.CWM Recovery Installed .
I managed to get the CWM recovery of similar specs Chinese phone which is working flawlessly but it gives little graphics jerk during very first time
entering into recovery..but all the features works perfectly fine.If some developers can help me fix that will be great ..suggestion welcome
INSTALLATION Instructions
• Download Rom and copy to Sd card
• Reboot into CWM Recovery
• Enter Mount and Storage -> /format system
• Wipe data/factory reset -> Wipe cache partition enter Advance -> /wipe dalvik cache
• Flash ROM = wait until finish
• All Done enjoy
Whats is working
[*]Wifi
[*]Camera
[*]Dual sim
[*]3G
[*]All MIUI feature
What is not :
Screen shot comes upside down .and you know how to fix that
rest
You tell me
Download
Recovery >>>DOWNLOAD
MIUI V5 > >>>DOWNLOAD
Click to expand...
Click to collapse
Basic GAPPS Flash Tutorial
1.After first boot reboot your phone to recovery again.
2.Select [install zip from sdcard] → [choose zip from sdcard]→ [XXX-GAPPS.zip] → [YES]
3. Wait flash finished, press Back and select reboot system now [], the phone going to automatically restart with installed GAPPS.
4.Set up your Google and Xiaomi Accounts(for themes).
MIUI JB/4.1.X - DOWNLOAD
Click to expand...
Click to collapse
Hit Thanks If you Like my work !!
Click to expand...
Click to collapse
Some of the screenshots of MIUI V5 for Vollo VX98
some people asked me CWM flashing method ..so here are some of the instructions those who are not aware of the Fastboot
You can use Fastboot methoed to install the CWM recovery with following command
fastboot flash recovery your_recovery_image.img
But most important part is how to setup the fastboot working folder and fastboot detects your phone .
Follow the instructions :
1. Install the device drivers of Vollo Vx98 ( which you get when you connect your phone with stock rom in CD icon )
2. setup fastboot working folder , extract the files in some working folder .
3. Now Turned OFF phone and after that hold VOLUME – button and plug phone into computer while powering on phone .
4. Now Phone should be in fastboot mode with no sign on the phone ( does not display anything ).5. Lets assume you are in C:\fastboot (working folder).check your device whether it is connected to fastboot or not .execute this command
" Fastboot devices " . you should see serial number of the device " MSMSKUD" .. If it says " Waiting for devices " then Your fastboot is not setup properly .
6 .Put the recovery file in the C:\fastboot folder .
7 . execute the command " fastboot flash recovery your_recovery_image.img."
8. Reboot into recovery .. There is some initial graphics problem in this recovery during load once loaded everything works fine .
How to enter into recovery : Press Power On +Volume up key ( Indication - phone vibrates when enters )
How to enter into Fastboot : Press Power on + Volume Down key ( Indication - phone vibrates when enters )
Download :http://en.miui.com/forum.php?mod=at...kMGRlZDR8MTM4OTI3NTkzNnwxNTU4OTU5OTZ8MTI2NDc=
Credit to XDA Developers : not sure his name
XPERIA Keyboard ( Tested -Working flawlessly on vollo With MIUI V5 )
If you want to change the Keyboard ( OPTIONAL) in place of Baidu input (chinese ) ... Hit the below link ...
Installation Instructions..
Download the Zip file.
place on to the Micro SD Card .
Reboot into CWM recovery.
Go to Install from SD card > Choose File > Flash > Wait until finish.
Rebooot. done!! Enjoy .. Hit Thanks If you like ..
Download >>>https://drive.google.com/file/d/0Byi9A80ZsWakYzQ0T1hSMHphWDg/edit?usp=sharing
Many thanks for manual. I maked one another package for my sister with polish language. Now only testing phase hope that phone functions will work fine now, because orginal vollo rom is realy bad.
For updating language check:
http://en.miui.com/thread-6222-1-1.html
And download this:
http://forum.xda-developers.com/showthread.php?t=1736409
U need to change settings in build.prob for me
ro.product.locale.language=pl
ro.product.locale.region=PL
Can be done with morelocale or some another locales settings apk.
Many thanks once more!
One of my Rom follower has already done on my Thread at MIUI .. you may check with him in case you need any information
http://en.miui.com/thread-12647-1-1.html .. "Mephisto.85 "
I found one bug - after some time, the phone stopped ringing on incoming calls. It only vibrates. No settings seems to change this.
Also, I forgot to backup the old ROM, so if someone has original rom for this phone I'll be thankful if they share with me.
No longer maintained, use TWRP 3 instead!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New, completely rebuilt
Team Win Recovery Project
for Lenovo VIBE Z2 Pro (K920) ROW.
Features
OTA Updates support
Full SELinux support
Mounting phone storage to PC via MTP
USB-OTG (exFAT & FAT32)
Fully functional ADB
Battery charging
Materialised theme by z31s1g
Additional partitions info
Modem - /modem
Efs - /fsg, /modemst1, /modemst2
Mrd - /mrd
Persist - /persist
Preload - /preload
Aboot (bootloader) - /aboot
Firmware-update - /sbl1, /rpm, /tz, /dbi
Splash - /splash
How to enter recovery
Hold the POWER button and BOTH VOLUME buttons simuntaneusly until you see the logo.
Disclaimer
I am not responsible for anything that happens to your phone or computer. You have to understand what you are doing.
One-Time Boot
Enable ADB debugging (in Developer Options)
Reboot into bootloader / fastboot mode (adb reboot-bootloader)
Boot into recovery.img (fastboot boot recovery.img)
Done!
How To Flash
Install ADB+Fastboot with drivers (I recommend this installer)
Enable ADB debugging on your phone (in Settings->Developer Options)
After connecting the phone to the PC, pop up may appear, tick Always allow from this computer and click OK
Extract downloaded recovery zip and copy .img file to C:/adb
Now open cmd line (press Start+R, type "cmd", press OK) and go to C:/adb (type "cd C:/adb" and hit Enter)
Reboot into bootloader (fastboot mode) (type "adb reboot-bootloader")
Your phone should now reboot into the bootloader (Little green android logo in the middle of the screen)
Flash the recovery.img (type "fastboot flash recovery recovery.img")
(*) Now boot into the recovery (type "fastboot boot recovery.img")
(*) Mount /system partition (In TWRP go to Mounts and tick System)
(*) In TWRP open File Manager, go to /system and rename recovery-from-boot.p to recovery-from-boot.p.bak
Finally, reboot!
Done!
* You should do these steps only if you have Lollipop firmware (to prevent from TWRP being overwritten by stock recovery on each boot)
Download
(mega.nz)
TWRP 2.8.7.1 (18.0 MB)
TWRP 2.8.7.0 (19.5 MB)
CN Devices
There is limited support for CN devices although most features (backup/restore, etc...) should work fine.
I don't own CN device, therefore I can't "add" full support for them.
Check out my script for switching between UIs under TWRP!
Screenshots below
Source: https://github.com/ElectryDev/twrp_kingdom_rowhttps://github.com/ElectryDev/twrp_kingdom_row
XDA:DevDB Information
TWRP for Lenovo VIBE Z2 Pro, Tool/Utility for the Android General
Contributors
Electry
Source Code: https://github.com/ElectryDev/twrp_kingdom_row
Version Information
Status: Stable
Current Stable Version: 2.8.7.1
Stable Release Date: 2015-12-19
Created 2015-08-01
Last Updated 2017-01-24
i guess this is only for kitkat and would not work with lollipop
jacktackle said:
i guess this is only for kitkat and would not work with lollipop
Click to expand...
Click to collapse
Yes, for now. There is still no way of unlocking the bootloader.
to unlock the bootloader take a look here
On K920 CN version I can't backup some addtional partitions
ROM: ROM VibeUI_2.5_1526_5.574.1_ST_K920
TWRP: K920_TWRP_2.8.6.1_LP
I can mount: System, Persist, Cache, Data, Modem & OTG
but NO NvRam! The Preload is available, but not checkable
I can backup: Aboot, Boot, Recovery, System, Persist,
No modem neither nvram
Uploaded 2.8.7.0
Lolipop 5.0.2 here. Rooted Z2 Pro, unlocked boot loader but still do not understand how to install twrp. No clear procedure ......
Have you read the first post incl the instruction "How to flash"?
I know it's not that straightforward. You have to have adb and fastboot installed somewhere, then copy the .img file there and execute those commands in cmd line from that location.
One thing I forgot to mention is that you have to delete recovery-from-boot.p file (i think it's in /system) before booting into android, otherwise your custom recovery will get replaced with the stock one.
I'll try to rewrite the guide tomorrow.
Electry said:
I know it's not that straightforward. You have to have adb and fastboot installed somewhere, then copy the .img file there and execute those commands in cmd line from that location.
One thing I forgot to mention is that you have to delete recovery-from-boot.p file (i think it's in /system) before booting into android, otherwise your custom recovery will get replaced with the stock one.
I'll try to rewrite the guide tomorrow.
Click to expand...
Click to collapse
THNX Electry for your answer
Tommes24 said:
Have you read the first post incl the instruction "How to flash"?
Click to expand...
Click to collapse
Try to be polite and not just the "smart" guy. Electry was so kind to give some explanations ......
Confirm problem
I have the Chinese version of K920.
Everything was ok until confirming the system/recovery.from.boot.p file rename.
I can not confirm. I should swipe to confirm, but it do not work. And when I unfortunately touched the power button, the whole operation was locked. Now I have a kind of an Icon in the lower left part of the screen parly hidden. It is a padlock and a text saying "...t to Unlock".
How to solve this?
Hi Electry,
Thanks for twrp and all your works.
I need to upgrade my phone but with twrp i can't, do you have stock recovery image?
The tutorial is ok, everything is working fine, but i don't now how to enter the google ui style (in developer options switching between Lenovo UI style and Google UI style, is not possible now, as recovery option). After switching, nothing happends, just rebooting recovery TWRP mode. After that, what to do?
---------- Post added at 05:09 PM ---------- Previous post was at 05:00 PM ----------
@ppllpp
http://lenovo-forums.ru/topic/14303-lenovo-vibe-z2-pro-k920-прошивка-k920-s271-150907-ota/
https://yadi.sk/d/hcZCg2SbbzSd8 (rom, sdupdate-qsb).
drpainster said:
The tutorial is ok, everything is working fine, but i don't now how to enter the google ui style (in developer options switching between Lenovo UI style and Google UI style, is not possible now, as recovery option). After switching, nothing happends, just rebooting recovery TWRP mode. After that, what to do?
Click to expand...
Click to collapse
Unfortunately, switching between UIs is feature of stock recovery so clicking on that button in Settings won't do anything. I made a simple script for this -HERE-, just flash it in TWRP (and tell me if it works for you).
It's working! Thanks
Installed script. After reboot device turns to pure Android. In order to change to Lenovo UI, you have to run script again !!!
Well, that's the purpose of the script. I can't really make that button in Settings work with custom recovery.
If you want to switch UI, you'll have to flash that .zip each time. It is not that hard.
Something's wrong with "3. Boot into recovery.img (fastboot boot recovery.img)" (One-Time boot).
Nothing happends, message: wating for device...
hi,
i am using "lenovo k920pro, cn version, android lollipop s271 and stock recovery".
cn version. dont eu version.
for this device "twrp recovery" is required.
is there that can help?
thank you.
i have a problem with 271 upgrade. Now after wiping cache when android boot and appear "starting app x of y" it takes little times and numbers runs quickly. When finishes booting appear an error "storage space is running out" or somthing like that. With 246 never appened. I have to format again to solve this problem. Why is this happening now?
i was having difficulties with command line on my pc,so i flash recovery easily with Flashify apk.works like a charm!ofcourse i have unlock bootloader first!
Big thanks to https://forum.xda-developers.com/member.php?u=5490832--
@vaibhavpandeyvpz
FLASHING TWRP ON C701F ONLY!
Before you*proceed to*root Galaxy*C701F…
Please check these prerequisites before going forward to the root steps.
1.Download*and install USB drivers for Samsung on your computer
2.Go to*Settings*>*About Phone*>*Software info*and*tap for about five times to enable*Developer options.*You will get a “You are now a developer” message.Go back to*Settings*and now you will see a new*Developer Options*menu.*Tap on it and scroll down to find*OEM Unlock; enable it.Also, enable USB debugging*option from*Developer Options*>*USB Debugging.
3.Ensure that your phone carries more than 70% of charge. And all your internal files will be wiped
STEP 1
1. Download magisk and force encryption remover in to sdcard plz don't let me explain about magsik it's what that give u root access and its the best one right now .Period.And I love magisk very much thank you for ad free YouTube and black theme .
Download latest magisk from this site -- https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
And force encryption remover-- https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-6.0.zip
STEP 2
1.Download TWRP Recovery package for Samsung Galaxy C701F and keep this file anywhere in your computer:
https ://www.mediafire.com/file/6mdh49y6lh8x2hd/recovery.tar
2.Download Odin which will help you to install TWRP Recovery
Link--http://www.devfiles.co/download/2upJrl0y/Odin3_v3.12.3.zip
3.Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home button + Power button till you see the construction Android robot and a triangle. Press Volume down again to confirm to enter into Download
4.Open Odin on your computer. Connect your phone to your computer while your phone is in the Download Mode.If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
5.Click on ‘PDA’ / ‘AP’ and select the TWRP package file you downloaded in Step 1 for your phone.
THESE ARE VERY IMPORTANT STEPS
6. In ODIN, uncheck the Auto Reboot and check F. Reset Time options, if not already.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7.Now click on the Start button in Odin. Installation process will start and would take a few minutes to complete.
8.When odin shows PASS u can remove cable and press Volume down + Power key to force reboot until u see black screen (If it boots then twrp will be gone u need to start the whole process again )Once it does, you need to let go of the Volume Down button and hold the Volume Up button while still pressing the other listed buttons. This will boot the phone into Recovery mode and you should now see TWRP. You will see TWRP no excuses.
9.Now is the best part if anything goes wrong you are literally Fished and I mean it. The screen will be for making TWRP permanent do these steps or your phone won't boot P.S. you can fix any Samsung phone very simply so don't worry
Do these --Select Keep /system RO. Tap Wipe> Format Data and type “yes”.
All what I said is there in screen so do these things perfectly u just need to read everything properly
10. Now go back to the main menu in TWRP and select Reboot> Recovery . Select don't install TWRP app it's annoying I know u can disable it in settings option in twrp
11. After rebooting recovery flash force encryption remover that u downloaded and then after Tap the Install button in TWRP, navigate to the location where you copied the the no-verity-opt-encrypt-6.0.zip and select it. Swipe the installation confirmation slider when prompted
12.Now go back to the main menu in TWRP and select Reboot> Recovery
13.When the device reboots into TWRP, tap the Install option, navigate to the Magisk-v15.3.zip and install it. Or the latest magisk zip file
Magisk will now be installed on your device and it will be rooted the next time you boot it up. If not installed download magisk manager and install APK when you boot up to system
When the flashing is complete, tap Reboot> system.
Congratulations! Your new Samsung Galaxy C7PRO is now out of warranty… err… rooted. Open Magisk to verify if your phone has been properly rooted or not.
its good method.but you can send me a messgae for posting link in tinder technical youtube video. now you link is in spam so what can i do for you brother please tell me.
getting error after procedure....
error is set warranty bit kernel.....after booting device.....pl give soln......
thanxs with deep warm regards
SPG30759 said:
getting error after procedure....
error is set warranty bit kernel.....after booting device.....pl give soln......
thanxs with deep warm regards
Click to expand...
Click to collapse
There is no fix for that and btw this twrp is now useless try the new one 3.2.1 it's in xda search for it
STucked on bootscreen with samsung logo
Followed all step
bt now my phone is stucked on boot screen of samsung logo
showing set bit kernal
or set bit recovery
PLEASE HELP
also not goin in phone download or recovery mode
its only taking to twrp receovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Root Samsung Galaxy M12 ( Without TWRP )
Warning :
This will certainly delete all your files. Make a backup of what you consider important and do at your own risk.
Ok Now lets start to root your Samsung Galaxy M12 :
-- Unlock Bootloader
Unlock Bootloader :
Requirements
- PC
- Backup All Important Data
1. Go to settings > about phone > software information > tap build number seven times to unlock developer options
2. Now go back to settings and open developer options and turn on oem unlocking and usb debugging
3. Now turn off Your phone
4. Connect Your usb cable to pc and press both volume buttons and insert Your usb cable to phone instantly
5. You will get blue colour screen
6. long press volume up to unlock bootloader and press volume up ( yes )
Now your phone will be formatted, After that phone will turn on and do Setup. Make sure you connected to Wifi or you have mobile data.
Now :
1. Unlock/Enable Developer Options Again
2. Check is there's Grayed OEM Unlock Options
3. If No OEM Unlock Options in Developer Settings, Close settings app from Recent Apps, and wait 1-5 minutes,
4. Check Developer Settings again
5. If there's a "Grayed" OEM Unlock Options in Developer Settings.. Your bootloader is unlocked
-- Flashing Root Files
Flashing Patched Boot Image :
Requirements
- PC
- Odin Software
- Unlocked Bootloader
- Drivers of Samsung Phone
- Patched Boot Image ( TAR Format )
1. Download RootM12.tar
2. Now turn off Your phone, Connect Your usb cable to pc and press both volume buttons and insert Your usb cable to phone instantly
3. Now Press Volume Up ( Download Mode )
4. Go to Options in ODIN Software and Make Sure Options turned on only "Auto Reboot" and "F Reset Time"
5. Open Odin Software in Your PC and Add M12Root.tar in AP Block and Your Phone will automatically Reboot
6. Open Magisk App and Do Additional Setup
7. Reboot and Now your phone is Rooted
If you need help or this method not working for you, let me know with replying this thread
Ah also No Hardbrick chance of doing this
And Thanks!
Some Link
RootM12.tar
drive.google.com
Click to expand...
Click to collapse
ErukunBAKA said:
1. Download RootM12.tar file attached below
Click to expand...
Click to collapse
What file??
Badger50 said:
What file??
Click to expand...
Click to collapse
Ah Wait sir.. I Remember i've upload the files.. Maybe because My Internet Rip .. I'll try Attach Files again or add link
Edit : Added GDrive Link sir
Should be feasible?
This method is not working and is not transparent at all. Please guide us on how to patch the boot and vbmeta ourselves. As you cannot possibly create the patched boot and vbmeta for all the firmware builds nor you have mentioned which build this patched boot belongs to.
I have been trying to root M12 with the official magisk way but it is ending up in boot loops. Any ideas on how we can genuinely root this phone?
ankush1492 said:
This method is not working and is not transparent at all. Please guide us on how to patch the boot and vbmeta ourselves. As you cannot possibly create the patched boot and vbmeta for all the firmware builds nor you have mentioned which build this patched boot belongs to.
I have been trying to root M12 with the official magisk way but it is ending up in boot loops. Any ideas on how we can genuinely root this phone?
Click to expand...
Click to collapse
No Same problem with me too, I think we have to wait for some custom recovery and custom rom to be build for the M12, until than we can not do any thing, please do not try to force the root as it will be result in bricked device.
Hello
I am not a programmer and my knowledge of android is little , but from what I understand in this topic below , what is there also works on the galaxy M12
[ROOT] Modified Magisk for Galaxy A21S (R)
It seems that the A21S hasn't had any root since it was released (other than pre-rooted GSI ROMS) When flashing Magisk, the phone went into bootloop, and the only way to fix it was to flash stock rom via Odin. After some analysis, it seems that...
forum.xda-developers.com
Please read the replicas
ps: I think I should create a new topic on the matter put by me ...
M12 F bricked successfully!
Weverton Dev said:
M12 F bricked successfully!
Click to expand...
Click to collapse
Hi
You should have read this topic carefully, especially the replicas.
The method of this topic does not work!!!
On the other hand, what problem is your phone in? So someone here can help you
Sorry for the big letters but it's like warning to other people
ErukunBAKA said:
View attachment 5293105
How to Root Samsung Galaxy M12 ( Without TWRP )
Warning :
This will certainly delete all your files. Make a backup of what you consider important and do at your own risk.
Ok Now lets start to root your Samsung Galaxy M12 :
-- Unlock Bootloader
Unlock Bootloader :
Requirements
- PC
- Backup All Important Data
1. Go to settings > about phone > software information > tap build number seven times to unlock developer options
2. Now go back to settings and open developer options and turn on oem unlocking and usb debugging
3. Now turn off Your phone
4. Connect Your usb cable to pc and press both volume buttons and insert Your usb cable to phone instantly
5. You will get blue colour screen
6. long press volume up to unlock bootloader and press volume up ( yes )
Now your phone will be formatted, After that phone will turn on and do Setup. Make sure you connected to Wifi or you have mobile data.
Now :
1. Unlock/Enable Developer Options Again
2. Check is there's Grayed OEM Unlock Options
3. If No OEM Unlock Options in Developer Settings, Close settings app from Recent Apps, and wait 1-5 minutes,
4. Check Developer Settings again
5. If there's a "Grayed" OEM Unlock Options in Developer Settings.. Your bootloader is unlocked
-- Flashing Root Files
Flashing Patched Boot Image :
Requirements
- PC
- Odin Software
- Unlocked Bootloader
- Drivers of Samsung Phone
- Patched Boot Image ( TAR Format )
1. Download RootM12.tar
2. Now turn off Your phone, Connect Your usb cable to pc and press both volume buttons and insert Your usb cable to phone instantly
3. Now Press Volume Up ( Download Mode )
4. Go to Options in ODIN Software and Make Sure Options turned on only "Auto Reboot" and "F Reset Time"
5. Open Odin Software in Your PC and Add M12Root.tar in AP Block and Your Phone will automatically Reboot
6. Open Magisk App and Do Additional Setup
7. Reboot and Now your phone is Rooted
If you need help or this method not working for you, let me know with replying this thread
Ah also No Hardbrick chance of doing this
And Thanks!
Click to expand...
Click to collapse
How to backup data
Star_xda said:
How to backup data
Click to expand...
Click to collapse
Use cloud storage or your personal computer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
#reserved
#reserved
Not working:
* recovery loop
* recovery screen touch disabled
salvag said:
Not working:
* recovery loop
* recovery screen touch disabled
Click to expand...
Click to collapse
can you explain me whats not working ?
can you reproduce this error you are facing ?
Hi,
basically what i said:
* i was unable to reboot to system
* i could not enter custom recovery either; the touch screen did not work (the swipe buttom)
I did not try again; I reeinstalled the stock rom and used the magick patch to get root
#reserved
salvag said:
I did not try again; I reeinstalled the stock rom and used the magick patch to get root
Click to expand...
Click to collapse
Yes, it is correct solution!
1. Install a new (latest) firmware /at current moment it is SM-M115F_M115FXXU2BUD9_R(Android 11)_SEK_Factory Rom (5 File)_20210517/.
2. Go to download mode (screenshots in attachment), start Odin, uncheck "Auto Reboot in "Options" and in "AP" put patched file from attachment to this post (magisk_patched-23000_Av3SK.tar).
3. Press start.
4. After finish go to Recovery Mode and run "Wipe data/Factory Reset" and "Wipe cache partition"
5. Reboot.
6. Install Magisk-v23.0.
Enjoy!
N.B. Patched file in attachment work ONLY with firmware that specified above (SM-M115F_M115FXXU2BUD9_R)!!!
@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support
TheDevelopper said:
@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support
Click to expand...
Click to collapse
send logs if you get error
4yush5663 said:
send logs if you get error
Click to expand...
Click to collapse
It's just based on Android 10
stuck on recovery loop not booting to system despite complete wipe
Tolong solisinya, saya sudan install twrp m11 sukses dengan benar, tapi tidak bisa masuk home screen, cuma tampilan android is not runing, itu bagai mana ??
4yush5663 said:
View attachment 5293887
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
Click to expand...
Click to collapse
Can I use it for Android 11 updated M11 ??
Please reply and help.
Hari12a said:
Can I use it for Android 11 updated M11 ??
Please reply and help.
Click to expand...
Click to collapse
i am in currently in Android 10 , yes, you can try installing twrp in android 11
4yush5663 said:
i am in currently in Android 10 , yes, you can try installing twrp in android 11
Click to expand...
Click to collapse
I'm not dare to take risk. will it brick by deviice ? i am a noob .so i am so confused
my device is galaxy M11 on android version 11 UI 3.1.
Jalalludin said:
my device is galaxy M11 on android version 11 UI 3.1.
Click to expand...
Click to collapse
You flashed it??
Yes, I successfully flashed it, but the result is that the phone doesn't work, I've formatted the data and wiped the cache
I downgraded my latest firmware to android 10 stock rom (which had bit security level 2 because i couldn't downgrade to versions with bit security less than 2) to make this work, then I was able to flash the recovery by flashing vbmeta first then tried flashing 3.4.x.x as well as 3.5.x.x twrp recovery... I had a problem with /data partition but it was solved by doing nand erase in odin when flashing stock rom... but anyways I don't know if the problem is with modded twrp or unofficial lineageos cause in both versions of twrp I get stuck in bootloop on the lineageos loading...
Hope this helps anyone who comes here like me...