{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
#reserved
#reserved
Not working:
* recovery loop
* recovery screen touch disabled
salvag said:
Not working:
* recovery loop
* recovery screen touch disabled
Click to expand...
Click to collapse
can you explain me whats not working ?
can you reproduce this error you are facing ?
Hi,
basically what i said:
* i was unable to reboot to system
* i could not enter custom recovery either; the touch screen did not work (the swipe buttom)
I did not try again; I reeinstalled the stock rom and used the magick patch to get root
#reserved
salvag said:
I did not try again; I reeinstalled the stock rom and used the magick patch to get root
Click to expand...
Click to collapse
Yes, it is correct solution!
1. Install a new (latest) firmware /at current moment it is SM-M115F_M115FXXU2BUD9_R(Android 11)_SEK_Factory Rom (5 File)_20210517/.
2. Go to download mode (screenshots in attachment), start Odin, uncheck "Auto Reboot in "Options" and in "AP" put patched file from attachment to this post (magisk_patched-23000_Av3SK.tar).
3. Press start.
4. After finish go to Recovery Mode and run "Wipe data/Factory Reset" and "Wipe cache partition"
5. Reboot.
6. Install Magisk-v23.0.
Enjoy!
N.B. Patched file in attachment work ONLY with firmware that specified above (SM-M115F_M115FXXU2BUD9_R)!!!
@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support
TheDevelopper said:
@4yush5663
Add support for Android 11 please, it is actualy working on it but with a lot of bugs, mount partitions errors, please add support
Click to expand...
Click to collapse
send logs if you get error
4yush5663 said:
send logs if you get error
Click to expand...
Click to collapse
It's just based on Android 10
stuck on recovery loop not booting to system despite complete wipe
Tolong solisinya, saya sudan install twrp m11 sukses dengan benar, tapi tidak bisa masuk home screen, cuma tampilan android is not runing, itu bagai mana ??
4yush5663 said:
View attachment 5293887
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.5.x.x_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
-Internal may shows 0mb (temp fix go to back up and click refresh sizes )
-Giving prompt "No OS installed when pressing Reboot to system" that a false negative
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
Click to expand...
Click to collapse
Can I use it for Android 11 updated M11 ??
Please reply and help.
Hari12a said:
Can I use it for Android 11 updated M11 ??
Please reply and help.
Click to expand...
Click to collapse
i am in currently in Android 10 , yes, you can try installing twrp in android 11
4yush5663 said:
i am in currently in Android 10 , yes, you can try installing twrp in android 11
Click to expand...
Click to collapse
I'm not dare to take risk. will it brick by deviice ? i am a noob .so i am so confused
my device is galaxy M11 on android version 11 UI 3.1.
Jalalludin said:
my device is galaxy M11 on android version 11 UI 3.1.
Click to expand...
Click to collapse
You flashed it??
Yes, I successfully flashed it, but the result is that the phone doesn't work, I've formatted the data and wiped the cache
I downgraded my latest firmware to android 10 stock rom (which had bit security level 2 because i couldn't downgrade to versions with bit security less than 2) to make this work, then I was able to flash the recovery by flashing vbmeta first then tried flashing 3.4.x.x as well as 3.5.x.x twrp recovery... I had a problem with /data partition but it was solved by doing nand erase in odin when flashing stock rom... but anyways I don't know if the problem is with modded twrp or unofficial lineageos cause in both versions of twrp I get stuck in bootloop on the lineageos loading...
Hope this helps anyone who comes here like me...
Related
Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4
Thank you
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
did it get completed on odin? Try changing usb cable and usb port
Will it work with cwm
And also is it necessary to download (gapps)
Does it have to be stock frimware so the rom could be installed?
Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/
please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox
Its not installing . I tried it . Showing an error but gaaps is working.
rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework
munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended
alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work
Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got
Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
tried that solution but still it shows same error... e unable to mount system
For this do we need to be on CM 11 ????
Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install
abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English
Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note - I'm Not Responsible for bricked devices
About Team win recovery project
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
Installation procedure (PC/ADB Method)
1. Download TWRP img, copy in adb folder
2. Connect phone to PC and boot your phone to bootloader mode
3. Open CMD in that folder
4. Type
Code:
fastboot devices
to confirm if device is recognized
5. Type
Code:
fastboot flash recovery (twrp img name).img
6. Use volume buttons to select "Reboot to Recovery" option
7. Now flash ROM, Kernel, Magisk or whatever you wish and press reboot system
Installation procedure (Any previous recovery)
1. Download TWRP img
2. Reboot your phone to your current recovery
3. Head over to Install tab, select option "Select img" and select the downloaded recovery img
4. Select "Recovery" from the option showed
5. After successfully flashing recovery img, Reboot to System/Recovery from Reboot tab
Download link : Sourceforge | GitHub
XDA:DevDB Information
[UNOFFICIAL] TWRP 3.5.2 | Team Win Recovery Project | Realme 2 Pro (RMX1801), Tool/Utility for the Realme 2 pro
Contributors
shubhambhise
Source Code: https://github.com/RMX1801
Version Information
Status: Stable
Current Stable Version: 3.5.2
Stable Release Date: 2021-05-04
Created 2020-03-21
Last Updated 2021-05-04
Reserved
Changelog (21-03-2020)
- Initial release
- Added OZIP Decryption/Flashing support
- Added Encryption/Decryption support (Doesn't decrypt TWRP on stock yet, but fine on custom ROM)
Changelog (10-06-2020)
- New TWRP version 3.4.0 .
- Compiled with inline kernel and 4.4.226 android-linux-stable.
- Compiled on lineage16 source.
- Added option to backup System, Vendor and Boot partition.
Changelog (14-01-2021)
- New TWRP version 3.5.0 .
- Added support for repack tools.
- Additional Changelogs : twrp.me .
Changelog (16-01-2021)
- Fix Zip Compatibility Error.
Changelog (04-05-2021)
- Refer changelog here : twrp.me.
Reserved
Ozip
Suppose i flash a color os ozip. After booting and if i reboot to recovery will i be able to mount data?
Otg support for twrp
I am not able to use otg for backup and restore.
why in backup ,,there is only system image ,vendor image ,recovery ,,etc
no system and vendor backup option available
while in r2x2 recovery there is backup option for system ,system image ,,vendor ,vendor image
how to take a backup of system and vendor of current installed rom ??
I have successfully install this latest version in my latest realme 2 pro android 10 but . when I enter into the recovery it says enter password to and Mount decrypt data
Brother i can not install any other version of twrp except this one twrp 3.5.0.what is the problem bro?
And when can we mount internal storage in this version
Hey can you give me the latest realme 2 pro stock recovery and i extracted the latest realme 2 pro stock rom file but i haven't get recovery
Asif NiZam said:
Brother i can not install any other version of twrp except this one twrp 3.5.0.what is the problem bro?
And when can we mount internal storage in this
Asif NiZam said:
Brother i can not install any other version of twrp except this one twrp 3.5.0.what is the problem bro?
And when can we mount internal storage in this version
Click to expand...
Click to collapse
Because the other versions of recovery is made for android 9 and 8 so you probably in android 10 that's why and the twrp 3.5.0 is made for android 10 so let's come to the mounting part so what you have to do is download any custom rom from nowhere then go to the recovery and wipe the cache and data system vendor then reboot into twrp recovery again then flash the custom rom then when it's done boot it up now you can mount anything you went but you cannot mount system and others in stock rom i did the same with my realme 2 pro
Click to expand...
Click to collapse
xxAmigoxx said:
I have successfully install this latest version in my latest realme 2 pro android 10 but . when I enter into the recovery it says enter password to and Mount decrypt data
Click to expand...
Click to collapse
Wipe the data system vendor and then reboot into twrp again then your data is decrypted but not permanently so what you have to do is after the wipes done then install any custom rom for your devices that's all now your data is decrypted
just a noob question, I have a new vanilla realme 2 pro running realme ui android 10 (colour os v 7). I haven't unlocked bootloader or false anything yet.
Can I flash this recovery via fastboot or do I have to do something else (apply for bootloader unlock via IMEI etc )
iamashwin said:
just a noob question, I have a new vanilla realme 2 pro running realme ui android 10 (colour os v 7). I haven't unlocked bootloader or false anything yet.
Can I flash this recovery via fastboot or do I have to do something else (apply for bootloader unlock via IMEI et
Click to expand...
Click to collapse
Don't wait for app imei registration bro.it never comes to me .unlock bootloader through adb. Follow any tutorial available for realme 2 pro bootloader unlock
.
I try to flash the recovery however I am getting an
error message of two types ( as attached in the screenshots ) and the phone exists from bootloader to a screen where it says in Chinese " press power key for 6-10 seconds " Please help on how do I do it! I'm stuck in the middle.
adb sideload doesn't work on version 3.5.2
It's automatically disconnect the device and won't reconnect until sideload cancel
I flashed this and now the phone is in bootloop. Fastboot mode is not accessible.
sachinu7f said:
I try to flash the recovery however I am getting an View attachment 5373099View attachment 5373103error message of two types ( as attached in the screenshots ) and the phone exists from bootloader to a screen where it says in Chinese " press power key for 6-10 seconds " Please help on how do I do it! I'm stuck in the middle.
Click to expand...
Click to collapse
Already UBL?
SwiftRhyme said:
I flashed this and now the phone is in bootloop. Fastboot mode is not accessible.
Click to expand...
Click to collapse
After flash this recovery, go to recovery from fastboot by pressing volume button, choose recovery
jonnyluke said:
Already UBL?
After flash this recovery, go to recovery from fastboot by pressing volume button, choose recovery
Click to expand...
Click to collapse
As I said, fastboot itself went blank. However I managed to get phone back running using EDL. Seems like some firmware issue with phone. Fastboot is unlocked but flashing recoveries makes phone go bootloop everytime
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy A11 A115F and A115M.
Download & Guide:
1. Unlock your bootloader.
2. Download Galaxy A11 : a11q.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.- Type: multidisabler again. will see - Finished. when done.7. Go back to Wipe > Format Data > type yes.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Note:
To disable encryption manually:
You need to replace fileencryption=ice with encryptable=ice only in userdata line (maybe rest lines) in vendor/etc/fstab.qcom
To avoid stock recovery restoration manually:
Rename system/recovery-from-boot.p to recovery-from-boot.p.bak
Click to expand...
Click to collapse
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram:
Link
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@ianmacd for multidisabler
Sources:
Kernel tree
Device tree
Changelog:
29.11.2021 - Update to TWRP 3.6.0
- Add Symlinked dynamic partitions to fstab
- Update multidisabler
- fstab clean up
03.03.2021 - Update to latest TWRP source
- Add terminal multidisabler script
- fstab cleanup.
17.12.2020 - Update to latest TWRP source
- Fixed fastbootd
- Fixed external_sd and usb-otg mount points.
02.12.2020 - Initial Release.
reserved for fastboot guide
I have a SM-A115M/DS and I tried to flash the multidisabler and get this error!!!
please help me!
JoKeRBrAzZiL said:
I have a SM-A115M/DS and I tried to flash the multidisabler and get this error!!!
please help me!View attachment 5153865
Click to expand...
Click to collapse
Use latest version multidisabler-samsung-2.6c-afaneh92.zip
MY A115F not booting into recovery after flashing .tar file???solution
please help @afaneh92
musamalyk said:
MY A115F not booting into recovery after flashing .tar file???solution
please help @afaneh92
Click to expand...
Click to collapse
You need to boot into twrp immediately, press both volume buttons and connect usb at logo after first reboot.
afaneh92 said:
You need to boot into twrp immediately, press both volume buttons and connect usb at logo after first reboot.
Click to expand...
Click to collapse
it did not work ..please guide more clearly after installing .tar file using odin i m not able to boot into twrp recovery only my samsung keep restating on galaxy a11 ..may be its model difference because i m using Asian model of A11 from Pakistan @afaneh92
musamalyk said:
it did not work ..please guide more clearly after installing .tar file using odin i m not able to boot into twrp recovery only my samsung keep restating on galaxy a11 ..may be its model difference because i m using Asian model of A11 from Pakistan @afaneh92
Click to expand...
Click to collapse
Oh sorry I gave you the wrong instruction.
I have the A115F which is same as your device.
After flashing the tar file, press power and volume up, then release power at logo and keep vol up pressed until you see twrp logo.
hopefully it will work???
have you tried any GSI project treble Rom in your A11
if yes then please tell which one????
i tried it did not work because to stop downlaoding mode need combination of volume down plus power key instead of volume up ..there is not any twrp ....
" press power and volume up, then release power at logo and keep vol up pressed until you see twrp logo" again wrong
please help
musamalyk said:
hopefully it will work???
have you tried any GSI project treble Rom in your A11
if yes then please tell which one????
Click to expand...
Click to collapse
Yes, lineage-18.0-20201120-UNOFFICIAL-treble_a64_bvS installed
musamalyk said:
i tried it did not work because to stop downlaoding mode need combination of volume down plus power key instead of volume up ..there is not any twrp ....
" press power and volume up, then release power at logo and keep vol up pressed until you see twrp logo" again wrong
please help
Click to expand...
Click to collapse
If you disable auto reboot from odin, then you can reboot using vol down and power, after screen goes black press vol up and power until you got to boot logo. then keep vol up.
afaneh92 said:
Yes, lineage-18.0-20201120-UNOFFICIAL-treble_a64_bvS installed
Click to expand...
Click to collapse
please provide link
musamalyk said:
please provide link
Click to expand...
Click to collapse
Andy Yan's personal builds // GSI
Download Andy Yan's personal builds // GSI for free. None
sourceforge.net
New build up.
- Update to latest TWRP source, Fixed fastbootd, Fixed external_sd and usb-otg mount points.
So where is yours build of LOS 18.0? I see there only the LOS 17.1
griha41 said:
So where is yours build of LOS 18.0? I see there only the LOS 17.1
Click to expand...
Click to collapse
Im not building ROMs, those are GSI. Not my own builds.
afaneh92 said:
Im not building ROMs, those are GSI. Not my own builds.
Click to expand...
Click to collapse
Ok. o you pick it from testing branch? And how do you install LOS? I'm tryin' with ADB Sideload but on my SM-A115F it's failed to start (I'm using TWRP that you had placed in this topic.)
griha41 said:
Ok. o you pick it from testing branch? And how do you install LOS? I'm tryin' with ADB Sideload but on my SM-A115F it's failed to start (I'm using TWRP that you had placed in this topic.)
Click to expand...
Click to collapse
Extract to img and flash using fastboot to system, then flash magisk.
Only a64_bvS can work on A11
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: I AM NOT RESPONSIBLE OF ANY DAMAGE WILL HAPPEN AFTER YOU FLASH THIS TWRP ,
ALWAYS DO BACKUP FIRST
A Warm welcome to All m11 users & lots of Love:highfive:
DOWNLOAD MODE
1. power off your samsung m11
2. press & hold both vol+ & vol- keys and insert USB driver
3. now you are in Download mode
INSTALLING RECOVERY
1. open odin flash tool
2. make sure you are in download mode and USB is connected
4. now you will see Added logs in log Tab
3. click on AP Tab and select TWRP-3.4.0_10-m11q-goldfish07.tar file
4. now click on start & wait for recovery to be flashed .
5. if recovery flashed correctly you see pass message
NOTE: when you see pass message suddenly press and hold vol- key and power
6. Congratulations you are in recovery now
ROOTING SAMSUNG M11 (Android 10)
1. now flash Magisk 20.4.zip
2. after flashing just reboot
3.now your device will boot successfully
4. Congratulations
[NOTE:]
can't mount data & internal storage is 0
1. click wipe in recovery
2 . click on format data type yes and hit return
3. check, you will able to mount data [internal storage]
vbmeta error
1. download vbmeta-goldfish07-Odin-AP.tar
2. flash through odin
3 and reboot to recovery
BUGS
Tell me if you find any:fingers-crossed:
DOWNLOADThanks to :
@TeamWin For the TWRP IMG
Contributors:
goldfish07(Ayush Bisht)
Source: https://github.com/goldfish07
TWRP 3.5.x.x for m11
CLICK HERE
#reserved
I got this FAIL message when ever I tried
beki21 said:
View attachment 5311963I got this FAIL message when ever I tried
Click to expand...
Click to collapse
you are flashing wrong recovery, download from above link
need to download samsung usb drivers/adb and fastboot drivers/sdk-platform tools for that?or just follow your steps? .....please tell...hurry.....
HirukaNU15 said:
need to download samsung usb drivers/adb and fastboot drivers/sdk-platform tools for that?or just follow your steps? .....please tell...hurry.....
Click to expand...
Click to collapse
yes, you need samsung usb driver , if not installed
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Please reply
Sir
Souvik10 said:
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Click to expand...
Click to collapse
make a video and send me
Souvik10 said:
Sir my phone does not boot after flashing it
It remains in download mode (Samsung m11)
Click to expand...
Click to collapse
You probably did the wrong steps
Can i use it for M11 having Android 11 and oneui 3.1?
Please help
Hey.bro....thank you..! its working successfully!.....but when i going to flash a zip its saying invalid zip format...any solutions for it...?
4yush5663 said:
TWRP 3.5.x.x for m11
CLICK HERE
Click to expand...
Click to collapse
Sir plz provide samsung m11 custom rom
can i install twrp even if its updated to android 11
C
HirukaNU15 said:
Hey.bro....thank you..! its working successfully!.....but when i going to flash a zip its saying invalid zip format...any solutions for it...?
Click to expand...
Click to collapse
Just download magisk 24 apk then change the apk to zip when it will work
Did you unlock the bootloader? Pls answer
4yush5663 said:
make a video and send me
Click to expand...
Click to collapse
please my samsung m11 is always rebooting to twrp recovery instead of systems and they all passed
joeshua007 said:
please my samsung m11 is always rebooting to twrp recovery instead of systems and they all passed
Click to expand...
Click to collapse
you need to reboot to system from twrp recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.7 For Galaxy A52 4G and A72 4G
Disclaimer
Code:
*I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
*Please do some research if you have any concerns about features included in this recovery before flashing it!
*YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Features:
Android 11, 12 and 13 support
Encryption support (AOSP and OneUI)
Bugs:
Encryption only works on OneUI if no screen lock is set
Downloads:
A52 4G: TWRP.me
A72 4G: TWRP.me
How to install
Open Settings -> About Phone -> Software and tap "Build Number" 7 times until it says "developer mode enabled".
Go back to Settings -> Developer Options -> Enable "OEM unlocking"
Enter Download Mode by powering off your phone, then hold down both volume keys and connect your phone to a Computer.
Release all keys, then hold down Volume Up to get into "Device unlock mode" and confirm that you want to unlock the bootloader. This will wipe all data from the phone.
The phone will automatically reboot. Now go through the initial setup and connect your phone to the internet (either using Wifi oder Mobile data).
Go back to Developer Options and check that OEM Unlocking is there and grayed out. Your bootloader is now unlocked.
Download and install Samsung Drivers on your Computer.
Download the latest *.tar from the TWRP website for your phone.
Download Odin, from example from https://downloads.corsicanu.ro/samsung/.
Turn off your phone and reboot to download mode by holding down Volume up and Volume down and then connect your phone to a PC. Then press Volume Up once to get into Download mode.
Open Odin and check if your device is detected.
Put the TWRP tar file you downloaded into the AP tab and put disabled VBMeta in the USERDATA slot.
Click start and wait for the installation to finish, Odin will show PASS.
Immediately after the screen goes black hold down Volume up and Power button at the same time until you enter TWRP (You may need to release the keys after about 20-30secs due to the "unlocked bootloader" warning).
If you properly followed all the steps you should now see the TWRP menu.
Once TWRP has booted you need to format your data again to be able to boot into system.
Donations
This is not essential, but if you like TWRP and my work feel free to send me or TWRP a donation.
Sources:
A52 4G: https://github.com/TeamWin/android_device_samsung_a52q
A72 4G: https://github.com/TeamWin/android_device_samsung_a72q
Kernel: https://github.com/Simon1511/android_kernel_samsung_sm7125
Credits:
TeamWin
@Velosh for the original TWRP trees
@corsicanu for updating multidisabler for A12 and providing download links for Odin, USB drivers, etc
@redymedan for the video guide
Testers on Telegram
Everyone else involved
Reserved.
Nice job, congrats! Glad to see another Samsung being alive in terms of custom deving.
Amazing! thanks for the work Devs!
Hello Simon1511,
Please, to not make mistakes, the first time when I enter the TWRP, I must in the right order :
- 1 Format Data
- 2 Flash Multi-Disabler
- 3 Flash Disable DM Verity
- 4 Reboot on recovery or system to access the phone
In addition for Android 12, I have to root the phone first ?
Because I want to have on this phone also ROOT + TWRP.
I come from an s10 Android 10 and the way to install TWRP seems different...
Thank you in advance.
The restoration is not working for vbmeta and super partition
Elvaa said:
The restoration is not working for vbmeta and super partition
Click to expand...
Click to collapse
Restoring the super partition works fine.
However, restoring vbmeta is generally not possible because only Odin can flash stuff to it.
TWRP has been updated to version 3.7!
Changelog
Code:
-Encryption/Decryption support for AOSP 12 and 13 ROMs
-Updated kernel to latest
-Fixed USB OTG and enabled NTFS support
-Switched to using FFS for MTP
-Added busybox bins
-Fixed ADB sideload
Hope this works for Android 13 on "A525FXXS4CVK4".
MobAndro said:
Hello Simon1511,
Please, to not make mistakes, the first time when I enter the TWRP, I must in the right order :
- 1 Format Data
- 2 Flash Multi-Disabler
- 3 Flash Disable DM Verity
- 4 Reboot on recovery or system to access the phone
In addition for Android 12, I have to root the phone first ?
Because I want to have on this phone also ROOT + TWRP.
I come from an s10 Android 10 and the way to install TWRP seems different...
Thank you in advance.
Click to expand...
Click to collapse
I hope the "DM Verity Disabler (Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip)" works for One UI 5.0 also...
SRooks1976 said:
I hope the "DM Verity Disabler (Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip)" works for One UI 5.0 also...
Click to expand...
Click to collapse
You don't need to flash that.
As you can see in the guide you only have to flash Multidisabler.
Why this keeps popping up after I installed this TWRP recovery, whilst earlier I patched the original AP file with Magisk and installed the firmware with that AP file, rooted my A52 (A525F), it was not there.
But when I installed TWRP, format Data, installed multi-disabler zip file, this keeps popping up.
SRooks1976 said:
Why this keeps popping up after I installed this TWRP recovery, whilst earlier I patched the original AP file with Magisk and installed the firmware with that AP file, rooted my A52 (A525F), it was not there.
But when I installed TWRP, format Data, installed multi-disabler zip file, this keeps popping up.
Click to expand...
Click to collapse
Well, this happens because the multidisabler zip disables most of Samsung's security mechanisms which (for somehow) make the phone think that a Service Provider Update is needed.
This should go away once you confirm it and/or reboot.
Can I root & install twrp with A13?
Simon1511 said:
Well, this happens because the multidisabler zip disables most of Samsung's security mechanisms which (for somehow) make the phone think that a Service Provider Update is needed.
This should go away once you confirm it and/or reboot.
Click to expand...
Click to collapse
Nope, even after rebooting many of times, the s**t happens.......
Reverting to Magisk Method without TWRP.
SRooks1976 said:
Why this keeps popping up after I installed this TWRP recovery, whilst earlier I patched the original AP file with Magisk and installed the firmware with that AP file, rooted my A52 (A525F), it was not there.
But when I installed TWRP, format Data, installed multi-disabler zip file, this keeps popping up.
Click to expand...
Click to collapse
This happens because you install a CSC that's not your original and it can't find the configuration for your SIM. Deleting system/priv-app/CIDManager should fix it.
Hello!
ShaDisNX255 said:
This happens because you install a CSC that's not your original and it can't find the configuration for your SIM. Deleting system/priv-app/CIDManager should fix it.
Click to expand...
Click to collapse
Hello! Is the latest one must be selected to backup system/vendor partition and restore it correctly later? If so, why its size is not counted?
can i flash this twrp on my a52f, which is still on stock rom binary 2
Linlova said:
can i flash this twrp on my a52f, which is still on stock rom binary 2
Click to expand...
Click to collapse
#1 says:
Simon1511 said:
#1 says:
View attachment 5794007
Click to expand...
Click to collapse
I already knew that before hehe, but just to make sure