Related
Hello,
I tried to install the new firmware which InsertCoin requires for the new ROM. (needed for 4.0.3), which didn't work out very well. The first time after flashing the PG58IMG.zip I couldn't install the ROM, so someone recommended me to retry installing the PG58IMG.zip, I did that and it messed my complete phone up. It kept boot looping and Clockworkmod gave me a bunch of error's and didn't do anything.
After installing a older PG58IMG.zip the phone at least worked again, Clockworkmod works and I can flash ROM's again, however when I go to my bootloader it says "-Locked-", not "-Revolutionary-".
Could this be fixed by doing the Revolutionary methode again? Isn't that going to f#ck up my phone?
JoeyLe said:
Hello,
I tried to install the new firmware which InsertCoin requires for the new ROM. (needed for 4.0.3), which didn't work out very well. The first time after flashing the PG58IMG.zip I couldn't install the ROM, so someone recommended me to retry installing the PG58IMG.zip, I did that and it messed my complete phone up. It kept boot looping and Clockworkmod gave me a bunch of error's and didn't do anything.
After installing a older PG58IMG.zip the phone at least worked again, Clockworkmod works and I can flash ROM's again, however when I go to my bootloader it says "-Locked-", not "-Revolutionary-".
Could this be fixed by doing the Revolutionary methode again? Isn't that going to f#ck up my phone?
Click to expand...
Click to collapse
It's normal If You changed firmware. Everything is OK, still You have S-OFF and You can flash custom ROM's. You don't have to run Revolutionary again.
cwibel said:
It's normal If You changed firmware. Everything is OK, still You have S-OFF and You can flash custom ROM's. You don't have to run Revolutionary again.
Click to expand...
Click to collapse
Okay, thank you very much.
JoeyLe said:
Okay, thank you very much.
Click to expand...
Click to collapse
You're welcome
Make sure your supercid and flash newest firmware which is 3.24 then flash latest insertcoin
Your hboot should say 1.27 and unlocked
Lately I have some problems with installing the latest firmwares for the Sensation. Both 3.24 as 3.30 firmwares cause a bootloop, but the 3.12 firmware is just working fine.
My flashing procedure:
1. Super wipe
2. Install Firmware
3. Super wipe
4. Install ROM
5. Wipe dalvik + cache
6. Fix Permissions
This all causes a bootloop. Also tried to install the ROM first and then the firmware. (without super wipe in between of course)
Things I've tried
- My cid was HTC__E11 and changed it to 11111111 (and back again now)
- Tried booting without sd-card and without sim-card
- Making a PG58IMG.zip with an old HBOOT
-Tried both Mike1986.'s firmware as the noob friendly from Kohr-Ah
More people having these probs and do any of you have new ideas?
The only thing that can in my mind, was to stick with the 3.12 roms untill the official release comes form HTC. Unroot etc to get the official update and check if my phone will work. If not, send it to HTC Repair centre.
Which ROM are you trying to install? You try updating firmware to latest 3.30 and install latest Insertcoin, works for me.
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
all you have to do is:
download the 3.30 fw
put the PG58IMG in your sd card root folder
go into hboot screen and flash it (you have to be superCID) reboot+vol down
now delete PG58IMG from your sd card and reboot in recovery
wipe all and flash your rom
enjoy
If you had bootloop eariler with V3.24 firmware , you will still have bootloop with V3.30 firmware as the HBOOT is same in both v3.30 and V3.24 .
Stick to V3.12 till HTC release a newer HBOOT in near future . Till now there is no logical reason why it is happening with a very few users.
I've had the same problem all day with this. I flashed the recommended 3.3.0 f/w this morning and couldn't for the life of my work out why i was getting bootloops.
Luckily I came across this by chance, saved hours of tearing my hair out thanks
matt95 said:
all you have to do is:
download the 3.30 fw
put the PG58IMG in your sd card root folder
go into hboot screen and flash it (you have to be superCID) reboot+vol down
now delete PG58IMG from your sd card and reboot in recovery
wipe all and flash your rom
enjoy
Click to expand...
Click to collapse
I've followed these steps and still gets me a bootloop as I mentioned in the starting post.
Sigg1996 said:
Which ROM are you trying to install? You try updating firmware to latest 3.30 and install latest Insertcoin, works for me.
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Click to expand...
Click to collapse
I've tried, ARHD, InsertCoin, HyperNonSense, Open Sensation CM9, Virtuos Inquisition. It's not the Rom that's causing the bootloop. It's the firmware that's causing it.. Most roms do work with he 3.12 firmware.
Think I'll stick to musarraf172 his advice and stay on 3.12 till a new hboot comes out. Or maybe if someone else finds a solution for this.
FINALLY a post that I can reply on (forum rules I'm new @ develpers section)
I have the same problem as you I get bootloop with 3.24 and 3.30
3.12 runs fine, my question is, can I install mike's new ROM 6.3.0 XE
with the 3.12 or will I screw up my phone (I really don't know much about this sorry if it's a stupid question )
P.S: the 3.12 fw bootloader says LOCKED on it, doesn't let me to flash radio, so I'm currently stuck with a piece of metal, any help?
thanks
avishai445 said:
FINALLY a post that I can reply on (forum rules I'm new @ develpers section)
I have the same problem as you I get bootloop with 3.24 and 3.30
3.12 runs fine, my question is, can I install mike's new ROM 6.3.0 XE
with the 3.12 or will I screw up my phone (I really don't know much about this sorry if it's a stupid question )
P.S: the 3.12 fw bootloader says LOCKED on it, doesn't let me to flash radio, so I'm currently stuck with a piece of metal, any help?
thanks
Click to expand...
Click to collapse
no you can't...you need at least 3.24 fw
where can I get some other firmware (unlocked one) which will work with mike's rom Android Revolution 3.6.13 (and the radio on his post)
on his post it sayd "thanks to HTC for base firmware" where can I get that?
Thanks
matt95 said:
no you can't...you need at least 3.24 fw
Click to expand...
Click to collapse
You might be wrong here.
@ guy asking question. Just install the rom with 3.12 fw, as mussy said, there are a few people that get bootloops with latest fw but run ok on 3.12. Also, you can always take 3.30 fw, remove hboot.img from it, and just update radio and other partitions but leave hboot intact. That might work.
Sent throught the wormhole from my CoinInserted Sensation OG.
avishai445 said:
FINALLY a post that I can reply on (forum rules I'm new @ develpers section)
I have the same problem as you I get bootloop with 3.24 and 3.30
3.12 runs fine, my question is, can I install mike's new ROM 6.3.0 XE
with the 3.12 or will I screw up my phone (I really don't know much about this sorry if it's a stupid question )
P.S: the 3.12 fw bootloader says LOCKED on it, doesn't let me to flash radio, so I'm currently stuck with a piece of metal, any help?
thanks
Click to expand...
Click to collapse
You can run ARHD 6.3.0 with V3.12 firmware. Some users already confirmed this.
Locked HBOOT does not allow to flash radio, splash via fastboot. But You can easily flash radio, splash etc by PG58IMG.zip method.
bootloop fix?
Hey again,
just figured out why I got the bootloops with the 3.30 and 3.24
The reason is very simple : I tried to flash them without flashing to the new ROM
The old ROM I had just happened to work with the 3.12 but with the 3.24/3.30 it went to the bootloops.
Here's the guide that helped me with this issue (now I have the 3.30 and the 6.3.0XE ARHD ROM) :http://forum.xda-developers.com/showthread.php?t=1472298
Thanks to erraggy for giving me this link to the great guide
P.S : If you have some cooked UOT file you made with SystemUI.apk & framework-res.apk , DO NOT flash them after flashing the ROM , your phone will be stuck @ the first boot for hours. I know it sounds stupid, but hey, I'm new at this and if it helps others do be it
btw, great ROM
avishai445 said:
Hey again,
just figured out why I got the bootloops with the 3.30 and 3.24
The reason is very simple : I tried to flash them without flashing to the new ROM
The old ROM I had just happened to work with the 3.12 but with the 3.24/3.30 it went to the bootloops.
Here's the guide that helped me with this issue (now I have the 3.30 and the 6.3.0XE ARHD ROM) :http://forum.xda-developers.com/showthread.php?t=1472298
Thanks to erraggy for giving me this link to the great guide
P.S : If you have some cooked UOT file you made with SystemUI.apk & framework-res.apk , DO NOT flash them after flashing the ROM , your phone will be stuck @ the first boot for hours. I know it sounds stupid, but hey, I'm new at this and if it helps others do be it
btw, great ROM
Click to expand...
Click to collapse
Glad to see that you have figured it out.
avishai445 said:
Hey again,
just figured out why I got the bootloops with the 3.30 and 3.24
The reason is very simple : I tried to flash them without flashing to the new ROM
The old ROM I had just happened to work with the 3.12 but with the 3.24/3.30 it went to the bootloops.
Here's the guide that helped me with this issue (now I have the 3.30 and the 6.3.0XE ARHD ROM) :http://forum.xda-developers.com/showthread.php?t=1472298
Thanks to erraggy for giving me this link to the great guide
P.S : If you have some cooked UOT file you made with SystemUI.apk & framework-res.apk , DO NOT flash them after flashing the ROM , your phone will be stuck @ the first boot for hours. I know it sounds stupid, but hey, I'm new at this and if it helps others do be it
btw, great ROM
Click to expand...
Click to collapse
I tried doing this and still cant upgrade to 3.24 or 3.30 fw. I did super wipe, flashed fw 3.30 and then flashed ROM but still get boot loops. I think some phones cant upgrade?
I have T-mobile US and i did try the user friendly fw 3.30 also.
tone602 said:
I tried doing this and still cant upgrade to 3.24 or 3.30 fw. I did super wipe, flashed fw 3.30 and then flashed ROM but still get boot loops. I think some phones cant upgrade?
I have T-mobile US and i did try the user friendly fw 3.30 also.
Click to expand...
Click to collapse
Did V3.24 work on your phone ? If not , then V3.30 will also not work. You can flash v3.12 and install ARHD 6.3.0 . They will work together. If you still want to flash V3.30 , then replace the HBOOT 1.27.1100 in V3.30 with the HBOOT in V3.12.
musarraf172 said:
Did V3.24 work on your phone ? If not , then V3.30 will also not work. You can flash v3.12 and install ARHD 6.3.0 . They will work together. If you still want to flash V3.30 , then replace the HBOOT 1.27.1100 in V3.30 with the HBOOT in V3.12.
Click to expand...
Click to collapse
Fw 3.24 didn't work for me either. I am currently using the 3.30 file with the hboot from 3.12 on Elegancia Rom. Its just strange that there are a few phones that can't boot with the 1.27 bootloader.
Sent from my HTC Sensation 4G using XDA App
I have just installed the official update from the xda topic here.
Currently Im on Hboot 1.27 and the stock rom is booting up without any problems!
No more bootloopts with Hboot 1.27 !
I'm gonna root my phone again and put back my image on OpenSensation/ CM9.
Hopefully it's finally solved ! I'll keep you guys updated
Floris-k said:
I have just installed the official update from the xda topic here.
Currently Im on Hboot 1.27 and the stock rom is booting up without any problems!
No more bootloopts with Hboot 1.27 !
I'm gonna root my phone again and put back my image on OpenSensation/ CM9.
Hopefully it's finally solved ! I'll keep you guys updated
Click to expand...
Click to collapse
Thats great. The official untouched HBOOT 1.27 solved the issue.
Just curious . Does it show "locked" in bootloader screen ??
If so that menas the fastboot extended commands are disabled.
Just check it.
Ok, I'm done now. After installing the stock rom I just installed superuser and recovery again. Afterwards I restored my Nandroid backup and it's up and running.
Bootloader shows me:
***** Unlocked *****
PYRAMID PVT SHIP S-OFF RL
Hboot- 1.27.0000
Radio-11.22.3504.07_M
Another problem solved !
Floris-k said:
Ok, I'm done now. After installing the stock rom I just installed superuser and recovery again. Afterwards I restored my Nandroid backup and it's up and running.
Bootloader shows me:
***** Unlocked *****
PYRAMID PVT SHIP S-OFF RL
Hboot- 1.27.0000
Radio-11.22.3504.07_M
Another problem solved !
Click to expand...
Click to collapse
sounds good.
Can you test the following command to flash a new splash .
fastboot flash splash1 splash1.img
You can download some beautiful splash from here. Open the flashable zip and find the splash1.img inside the etc folder.
I rooted my phone with Revolutionary.. I did something wrong with a firmware update but got it fixed..
I flashed the 1.17.2008 firmware, and my s is still off but I don't have the 'revolutionary' title at the top of my boot loader anymore...
1. Am I still rooted? root check said no..
2. Can I flash the latest firmware for ics roms?
3. Can I flash roms that don't require the latest firmware?
4. Do I need to re revolutionary my device? (revolutionary doesn't have my hboot version tho)
Any any suggestions on what I should is appreciated as well..
Thanks guys
matholomus said:
I rooted my phone with Revolutionary.. I did something wrong with a firmware update but got it fixed..
I flashed the 1.17.2008 firmware, and my s is still off but I don't have the 'revolutionary' title at the top of my boot loader anymore...
1. Am I still rooted? root check said no..
2. Can I flash the latest firmware for ics roms?
3. Can I flash roms that don't require the latest firmware?
4. Do I need to re revolutionary my device? (revolutionary doesn't have my hboot version tho)
Any any suggestions on what I should is appreciated as well..
Thanks guys
Click to expand...
Click to collapse
Nevermind
I have done the same thing, but I wasn't the one that sorted it out. I would like to know what to do / what the solution was to this as I'm fed up with not being able to mess around with my phone.
P.S I'm not that good with the whole rooting thing but I am willing to try when I can understand what most of it all means
so i know ill probably get some "read threads" or negative comments but im just really lost and confused and need some help..
ive been a verizon customer for some time and i finally switched to t-mobile..and i chose as my phone the htc sensation had it for at least 3-4 days and im lovin it..
im lovin the roms that are out for this phone and ive been reading the how to's and noob threads,im not so much of a noob at flashing roms as i did flash lots of roms before but considering as im new to the htc sensation im alil confused on how to be flashing roms for this phone
i see lots and lots of firmwares and radios idk whats what.. i want to flash a sense 3.6 or sense 4.0 rom with ics i did try one but it got me to a bootloop.. i do have s-off and i am rooted.. i flashed this [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable .. it got to boot animation then bootloop
my question is what will i need to flash roms for this phone.. firmwares/radios ect.. yes i know s-off and root which i already have,im running completly stock just with s-off and root
any help i can get please will be much appreciated,thanks a whole lot.. and to all the devs that put there hard work into makin great roms for this phone,thanks
Ok heres the best aosp setup.
Virtuous inquisition 4.
For sense ics roms id go with mike1986 arhd 6.5.3 rom.
So what u need to do is root ur sensation
Supercid
Flash 4ext recovery. Its an apk and easy to do
Upgrade ur firmware to 3.32. Flash in bootloader.
Need mike1986 superwipe script
Rom of your choice.
Boot into recovery. Flash the superwipe. Then flash ur rom. Quick run down of what you need to do.
Skill required? Not much. The hardest part might be using adb and fastboot commands for the supercid. Other than that its easy as pie
HTC Sensation FAUX G
«Virtuous Inquisition 4.0 ICS»
«6.5.3 ARHD Sense 4.0.3»
*VabeachFC*
vabeachfc3s said:
Ok heres the best aosp setup.
Virtuous inquisition 4.
For sense ics roms id go with mike1986 arhd 6.5.3 rom.
So what u need to do is root ur sensation
Supercid
Flash 4ext recovery. Its an apk and easy to do
Upgrade ur firmware to 3.32. Flash in bootloader.
Need mike1986 superwipe script
Rom of your choice.
Boot into recovery. Flash the superwipe. Then flash ur rom. Quick run down of what you need to do.
Skill required? Not much. The hardest part might be using adb and fastboot commands for the supercid. Other than that its easy as pie
HTC Sensation FAUX G
«Virtuous Inquisition 4.0 ICS»
«6.5.3 ARHD Sense 4.0.3»
*VabeachFC*
Click to expand...
Click to collapse
thanks so much,so now the supercid i read up on it while requiring s-off and root thats alil confusing but ill read up on it again and the superwipe ive been seeing that on rom threads "flash superwipe" what is that and where would i get it?
and i need a big help,i tried upgrading my firmware to 3.32 and it said "wrong cid" "fail" now its stuck on the htc logo and bootloops help please :'(
Superwipe is down toward the bottom of OP of this thread. It leaves you with a very very clean phone. So no apps, no user data, no ROM. You'd want to have a nandroid backup at the very least before superwiping, as well as titanium backup for your apps etc. You just flash superwipe from recovery like a ROM (install .zip from sdcard).
Sounds like you've got hold of the wrong firmware for your CID. So you either need to know your CID (if you've got your head around adb and fastboot commands, "fastboot getvar cid" will get that for you) and find the right firmware, or supercid your phone so you can use any firmware. Go to this thread for firmware.
For your firmware there's a file,
android.txt, that has a list of CIDs. The T-Mobile CID usually isn't in it. If you do the superCID you shouldn't have to worry about it. Other wise you have to open the file located in the PGM581000 file and add CIDT-MO010 to the txt file. Either way make sure you delete the PGM file immediately after you flash it.
Sent from my HTC Sensation ICS 4.0.3 ARHD 6.5.3XE. Rockin'
Go to the dev thread for ROMs, ARHD is my preference. Good directions and all the files you need linked right there. Well most ROM threads are that way but this ROM and firmware are smooth and flawless.
vabeachfc3s said:
Ok heres the best aosp setup.
Virtuous inquisition 4
Click to expand...
Click to collapse
This is misleading and not really true. First of all, VI is not true AOSP but Sense with most of the obviously sense parts removed. Secondly OpenSensation CM9 is hands down the best true AOSP rom and now that it has bluetooth and 1080p camcorder there's virtually no reason to use a senseless sense rom like vi.
to everyone that has tried to help me on this, THANK YOU ALL SO MUCH! giving me all the infos and quick break downs..
now i do have my phone up and running again but heres what i did..
when i learned that you need to upgrade your firmware to flash ics roms
i went to here http://forum.xda-developers.com/showthread.php?t=1412618 and i downloaded Firmware from 3.32.401.x & 3.32.401.10x RUU and renamed it to PG58IMG.zip i booted up to hboot and when it read the image file it said "wrong cid" "fail" i tried to boot up the phone normally after and it got stuck on the htc logo then bootlooped from there.. i did have a stock backup but flashing that over didnt work still had the same htc logo bootloop, i still had [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable saved to my sdcard so i tried to flash that to see what would happen and got the same result i then went to here.. http://forum.xda-developers.com/showthread.php?t=1459767 and downloaded firmware 3.32 Unlocked and renamed it to PG58IMG.zip booted up into hboot it did its thing but this time it successfully flashed.. i booted the phone back up and the rom and phone successfully booted up completly. now im running on [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable as my rom and im just lovin it! but at this point im kinda scared to flash anything else as i do have it booted up i dont wanna mess anything up again lol
marcviado said:
to everyone that has tried to help me on this, THANK YOU ALL SO MUCH! giving me all the infos and quick break downs..
now i do have my phone up and running again but heres what i did..
when i learned that you need to upgrade your firmware to flash ics roms
i went to here http://forum.xda-developers.com/showthread.php?t=1412618 and i downloaded Firmware from 3.32.401.x & 3.32.401.10x RUU and renamed it to PG58IMG.zip i booted up to hboot and when it read the image file it said "wrong cid" "fail" i tried to boot up the phone normally after and it got stuck on the htc logo then bootlooped from there.. i did have a stock backup but flashing that over didnt work still had the same htc logo bootloop, i still had [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable saved to my sdcard so i tried to flash that to see what would happen and got the same result i then went to here.. http://forum.xda-developers.com/showthread.php?t=1459767 and downloaded firmware 3.32 Unlocked and renamed it to PG58IMG.zip booted up into hboot it did its thing but this time it successfully flashed.. i booted the phone back up and the rom and phone successfully booted up completly. now im running on [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable as my rom and im just lovin it! but at this point im kinda scared to flash anything else as i do have it booted up i dont wanna mess anything up again lol
Click to expand...
Click to collapse
Good to hear you're up and running again just a question, at any point in that process did you check your CID? Which 3.32 firmware did you download from the second link?
goatee84 said:
Good to hear you're up and running again just a question, at any point in that process did you check your CID? Which 3.32 firmware did you download from the second link?
Click to expand...
Click to collapse
in the second link i downloaded the t-mobile unlocked 3.32 firmware, i just checked the modelid: PG5813000 which matched mine so i went for it..
i have one more question though..the supercid can i do that while running on a custom ics rom or it doesnt matter? will it still work regardless?
marcviado said:
in the second link i downloaded the t-mobile unlocked 3.32 firmware, i just checked the modelid: PG5813000 which matched mine so i went for it..
i have one more question though..the supercid can i do that while running on a custom ics rom or it doesnt matter? will it still work regardless?
Click to expand...
Click to collapse
It will work, can be done anytime.
Sent from my HTC Pyramid using xda premium
stringer7 said:
It will work, can be done anytime.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
thanks,so i just got done doing the supercid and confirmed 11111111 so now i can flash any firmware/roms ? sorry im still abit confused on what exactly supercid does and what i can do after..
vabeachfc3s said:
Supercid
Flash 4ext recovery. Its an apk and easy to do
Upgrade ur firmware to 3.32. Flash in bootloader.
Click to expand...
Click to collapse
Can I do SuperCID, Flash 4ext recovery, and upgrade firmware without wiping or affecting in any way my current stock (rooted) installation?
marcviado said:
thanks,so i just got done doing the supercid and confirmed 11111111 so now i can flash any firmware/roms ? sorry im still abit confused on what exactly supercid does and what i can do after..
Click to expand...
Click to collapse
CID is carrier identification. The thread you downloaded your T-Mobile firmware from contains firmwares for a variety of CIDs, in other words, specific to whichever carrier your phone came from. SuperCID removes that form of 'branding' and allows you to flash any firmware file, if you look through the list of firmware they can all be flashed to a device with CID 11111111. So essentially we superCID for convenience.
SuperCID has no bearing on what ROMs you can flash, the only consideration is that a particular ROM will require a certain firmware, eg. ICS ROMs need 3.12 base or higher.
Paul22000 said:
Can I do SuperCID, Flash 4ext recovery, and upgrade firmware without wiping or affecting in any way my current stock (rooted) installation?
Click to expand...
Click to collapse
Almost. SuperCID and custom recovery you can do no worries. Firmware upgrade will depend on what stock ROM is currently installed, if you flash firmware that your stock ROM isn't compatible with you will get bootloops and most likely have to downgrade. So personally I wouldn't be looking to upgrade firmware until you intend to flash a ROM that requires it. At that point you'll want a custom recovery anyway so it won't hurt to install that now.
goatee84 said:
Almost. SuperCID and custom recovery you can do no worries. Firmware upgrade will depend on what stock ROM is currently installed, if you flash firmware that your stock ROM isn't compatible with you will get bootloops and most likely have to downgrade. So personally I wouldn't be looking to upgrade firmware until you intend to flash a ROM that requires it. At that point you'll want a custom recovery anyway so it won't hurt to install that now.
Click to expand...
Click to collapse
Thanks. I'm currently on the T-Mobile Sensation 4G stock ROM S-Off/Rooted. Will going to the 3.32 firmware wipe the stock ROM or cause bootloops for sure?
I also have ClockWork Recovery from a really long time ago. Using ROM Manager to flash a new recovery (trying to update) does nothing. Why does that happen? Perhaps my recovery is too old?
Paul22000 said:
Thanks. I'm currently on the T-Mobile Sensation 4G stock ROM S-Off/Rooted. Will going to the 3.32 firmware wipe the stock ROM or cause bootloops for sure?
I also have ClockWork Recovery from a really long time ago. Using ROM Manager to flash a new recovery (trying to update) does nothing. Why does that happen? Perhaps my recovery is too old?
Click to expand...
Click to collapse
I'm would assume your 4G would already be running ICS? In which case you probably already have up-to-date firmware installed. The firmware update generally applies for people coming from GB to ICS. Go to Settings/About Phone/Software Information/More/Build Number and see what numbers you have there.
Flashing firmware will not wipe your ROM, the worst that will happen is bootloops if the firmware and ROM aren't compatible.
The recovery you have now shouldn't stop you from flashing a new one, instead of using ROM Manager try downloading 4ext from the Play Store and see how that goes.
Hi All, hopefully i am in the right place.
I have been trying to flash a CoinDroid_V1.5.2 on my Htc Sensation (not a 4g) which is locked to Telstra (Australian telco)
My specs as follows:
Android version: 2.3.4 (ginberbread)
sense: 3.0
Software number: 1.45.841.5
Hboot-S-off: 1.17 (phone is rooted)
cid: 11111111 (i changed the cid using information ive founded on this website)
midG5811000
4EXT Recovery tool installed as well
radio: 10.14.9035.01_m[, tried to flash to radio 11 but the phone kept restaring itself after 5 minutes, so i downgraded it, working fine now.
I have download a file called Android revolution hd super wipe, also the PG58IMG image file, everything that you might think off, but still does not work
I have tried to install the coindroid from the 4EXT utility program, selected coindroid 1.5.2 and started to flash, everything fine so far, but when it finishes i restart the phone and does not load up the rom, it keeps rebooting itself everytime, i have also tried using a different rom called Android_Revolution_HD-Sensation_6.6.4_XE and the screen gets stuck on the beats audio, does not go further than that.
Phone is rooted, s-off working, clockwordmod, 4EXT utility loads up as well...
I dont know what i am doing wrong here, can someone help me out here?
I have also tried doing this method in this thread: http://forum.xda-developers.com/showthread.php?t=1232107
Which basically unlocks your phone, tried it and the phone was unlocked but all my apps and configuration was gone, so went back to the s-off to restore(which did not load the 4ext) and tried to restore my stock rom from s-off, hoping that i can still use it with the phone unlocked. Did not worked at all. It was a miracle that after trying to install the coindroid and failed again, the 4ext when back alive again and i was able to restore the stock rom which works.
Can someone tell me please, what i have done wrong?? i have followed all the necessary steps and yet cant flash any rom
Thanks to all for helping the new newbie
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Kevc44485 said:
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Click to expand...
Click to collapse
This could be also my problem, however my phone boots fine.
Unfortunately I have no idea where to verify the firmware version. Could you please advise?
Settings/about phone/software information/software number. Ics roms will have 3.xx.xxx.xx software number and gb will have 1.xx.xxx.xx. 3rd post down in sensation general forum will have all the info about firmware that you need. You gotta flash firmware that matches the rom you want. You just download it and flash it before you flash the rom.
For me that's OrDroid 6.0.0...
thank you
SzosszeNET said:
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
Click to expand...
Click to collapse
How can i update hboot? Can you be kind enough to tell me where to go?
how can i ?
SzosszeNET said:
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
Click to expand...
Click to collapse
Kevc44485 said:
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Click to expand...
Click to collapse
I thought i flashed it using the ics firmware!
Where can i find the 3.3x.xxx.x firmware for ics?
Found this: http://forum.xda-developers.com/showthread.php?t=1459767
There are so many firmwares, i do not know which one to use to flash to ics, also, what will happend if i flash to firmware to to ics but then i boot into the stock rom? will it work?
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154 you can find the 3.32.xxx.xx firmware in that link. Get the correct one for you carrier. Make sure you follow any instructions given in all posts. I can tell you where to look but you gotta make sure you follow the instructions given in the developer threads.
Kevc44485 said:
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154 you can find the 3.32.xxx.xx firmware in that link. Get the correct one for you carrier. Make sure you follow any instructions given in all posts. I can tell you where to look but you gotta make sure you follow the instructions given in the developer threads.
Click to expand...
Click to collapse
My mid is: PG5811000
Telco company called : Telstra
my cidnum i dont know which it is, can you give a hand mate?
Also, if a flashed the firmware to ics, can i still be using the normal stock or i have to flash it as well?
According to your first post your cid is 11111111 (supercid). You should be able to use any one of the 3.32 firmware. Your rom has to match the firmware.
yes, it's 11111111
Kevc44485 said:
According to your first post your cid is 11111111 (supercid). You should be able to use any one of the 3.32 firmware. Your rom has to match the firmware.
Click to expand...
Click to collapse
Yes, i downloaded an app called CID GETTER, before i flashed, it said that my cid was TELST001, but now shows 11111111.
My stock rom wont work if i flashed the new Firmware, because it gingerbread and not Ice cream sandwich? Is that correct? Sorry for repeating myself, i just want to get it right.
Regarding the CoinDroid_V1.5.2 or the Android_Revolution_HD-Sensation_6.6.4_XE, they all shall work once i flashed the new firmware because booth are ICS, right?
Thanks mate, i am actually downloading this Firware: cidnum: TELST001
from the website you gave me.
What you reckon?
Ps: Should i update the radio too? or the new rom will update it for me?? This is getting annoying!
Ps1: Once i download the file(firmware) should i flash it trough clockwork recovery or EXT4 ? I am not sure about that.
Thanks for all the helpers out there.
Pinguino Tux said:
Yes, i downloaded an app called CID GETTER, before i flashed, it said that my cid was TELST001, but now shows 11111111.
My stock rom wont work if i flashed the new Firmware, because it gingerbread and not Ice cream sandwich? Is that correct? Sorry for repeating myself, i just want to get it right.
Regarding the CoinDroid_V1.5.2 or the Android_Revolution_HD-Sensation_6.6.4_XE, they all shall work once i flashed the new firmware because booth are ICS, right?
Thanks mate, i am actually downloading this Firware: cidnum: TELST001
from the website you gave me.
What you reckon?
Ps: Should i update the radio too? or the new rom will update it for me?? This is getting annoying!
Ps1: Once i download the file(firmware) should i flash it trough clockwork recovery or EXT4 ? I am not sure about that.
Thanks for all the helpers out there.
Click to expand...
Click to collapse
Flashing Firmware Updates both the bootloader/hboot and radio too.. So you need not worry about radio and all
After you flash this firmware tou can't run your current gb rom. As it's not compatible.. And only ics rom runs.. So after flashing the firmware flash the coindroid/ordroid rom and then you are good to go
Now regarding firmware flashing.. It will be PG58IMG file.. so the method of flashing will be different.. Please for instructions/steps on how to flash the firmware please check in the thread from where you downloaded. The steps are given there
Sent from my pyramid.. Through blazing fast sonic waves
Which rom to start with?
ganeshp said:
Flashing Firmware Updates both the bootloader/hboot and radio too.. So you need not worry about radio and all
After you flash this firmware tou can't run your current gb rom. As it's not compatible.. And only ics rom runs.. So after flashing the firmware flash the coindroid/ordroid rom and then you are good to go
Now regarding firmware flashing.. It will be PG58IMG file.. so the method of flashing will be different.. Please for instructions/steps on how to flash the firmware please check in the thread from where you downloaded. The steps are given there
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Thank you so much, it's all clear now.
I have to flash the firmware (anyone in my case due that my sensation is supercid) Using S-off
Flash then the superwipe for the sensation
Flash the Rom that you like
And that's my problem come, i dont know which rom to start with
I have narrowed my search to this 3:
Coindroid v 1.5.2 ( I read that it's quite a good one)
Ordroid v 5.02 (I have not seen any videos on youtube with the looks of it)
Android_Revolution_HD-Sensation_6.6.4_XE (A good choice as well)
From this 3 roms, which is the latest one? And which one is the one that will work out of the box without you trying to fix either the wifi or something like that
Thanks to all for their responses.
Coindroid and ordroid are same.. I mean coindroid became ordroid.. So ordroid is like an update to coindroid.. And basically these are sense 4 ported rom's.. So they are bound to have some issues.. I heard hot spot and Bluetooth are not working properly.. In OP of the thread the bugs are mentioned... So if you want to try sense 4 go for that
The other one ARHD is pretty stable... This comes under your out of box scenario also INSERT COIN comes under this case...
I'm using IC now and I'm pretty happy with it
Sent from my pyramid.. Through blazing fast sonic waves
So you're running clockwork mod recovery while using the 4ext recovery utility? Before updating use the.utility to flash 4ext recovery, if you flash ordroid there is already the option to superwipe built in when flashing. Be sure to flash 4ext
Sent from my sensational sensation 4g