Hello,
I tried to install the new firmware which InsertCoin requires for the new ROM. (needed for 4.0.3), which didn't work out very well. The first time after flashing the PG58IMG.zip I couldn't install the ROM, so someone recommended me to retry installing the PG58IMG.zip, I did that and it messed my complete phone up. It kept boot looping and Clockworkmod gave me a bunch of error's and didn't do anything.
After installing a older PG58IMG.zip the phone at least worked again, Clockworkmod works and I can flash ROM's again, however when I go to my bootloader it says "-Locked-", not "-Revolutionary-".
Could this be fixed by doing the Revolutionary methode again? Isn't that going to f#ck up my phone?
JoeyLe said:
Hello,
I tried to install the new firmware which InsertCoin requires for the new ROM. (needed for 4.0.3), which didn't work out very well. The first time after flashing the PG58IMG.zip I couldn't install the ROM, so someone recommended me to retry installing the PG58IMG.zip, I did that and it messed my complete phone up. It kept boot looping and Clockworkmod gave me a bunch of error's and didn't do anything.
After installing a older PG58IMG.zip the phone at least worked again, Clockworkmod works and I can flash ROM's again, however when I go to my bootloader it says "-Locked-", not "-Revolutionary-".
Could this be fixed by doing the Revolutionary methode again? Isn't that going to f#ck up my phone?
Click to expand...
Click to collapse
It's normal If You changed firmware. Everything is OK, still You have S-OFF and You can flash custom ROM's. You don't have to run Revolutionary again.
cwibel said:
It's normal If You changed firmware. Everything is OK, still You have S-OFF and You can flash custom ROM's. You don't have to run Revolutionary again.
Click to expand...
Click to collapse
Okay, thank you very much.
JoeyLe said:
Okay, thank you very much.
Click to expand...
Click to collapse
You're welcome
Make sure your supercid and flash newest firmware which is 3.24 then flash latest insertcoin
Your hboot should say 1.27 and unlocked
Related
Last night I flashed the gingerbread coredroid ROM and it worked fine. I just didn't really like the looks of some things, so I thought I'd change to a different ROM.
I thought about flashing the ICS Insertcoin ROM, so I flashed it, and it kept trying to boot, but turned off and kept repeating. But then I read that I was supposed to update the firmware, so I took out the SIM card and connected it to the computer and copied the 3.24 RUU to the SD card.
I followed the instructions and the RUU set up properly through HBoot the first time. Then i went in to recovery to wipe data. It had to reboot the phone before I did anything else, and it went back into HBOOT and tried to install the RUU again, but this time it failed due to CID being incorrect! I didn't give it a second thought, but then the insertcoin ROM was doing the same thing, going through the boot up images and shutting off right in the middle, and repeating.
I tried another ICS ROM, Android Revolution, and same result. Failed booting. Then I tried restoring my nandroid backup from before coredroid, and it also kept trying to boot and then shut down. Then I tried coredroid again, and it had the same reaction, failed booting! I redownloaded the ICS RUU 4 times and repeated this process 4 different times, even with other GB versions of insertcoin and ARHD, and no dice!
I'm not entirely tech savvy, so maybe there is soemthing I havent covered yet. Now the RUU fails not because of CID, but because of incorrect Model ID. I read about goldcards, but I can't make a new one because the phone won't even boot! Please help me!
edit: as of now, the phone does not turn on to any rom or homescreen, ONLY Hboot and recovery.
Hello Jagerlowe,
The 3.24 RUU installs fully with 2 Boots into Bootloader, so there is nothing to be worried about. Here's how you could solve your problem.
1. Please follow step 4 from this Guide to obtain SuperCID, make sure that the SuperCID is 11111111! Mismatch of the SUPERCID causes the Error you were previously facing.
2. With the updated SuperCID, reinstall the latest ARHD 6.2.1 ROM.
3. Boot & flash the suggested radio if you are using the ARHD ROM.
You should be alright
Please keep me posted about your problem and hope it helped!
Remember to Thank me!
CursedBat said:
Hello Jagerlowe,
The 3.24 RUU installs fully with 2 Boots into Bootloader, so there is nothing to be worried about. Here's how you could solve your problem.
1. Please follow step 4 from this Guide to obtain SuperCID, make sure that the SuperCID is 11111111! Mismatch of the SUPERCID causes the Error you were previously facing.
2. With the updated SuperCID, reinstall the latest ARHD 6.2.1 ROM.
3. Boot & flash the suggested radio if you are using the ARHD ROM.
You should be alright
Please keep me posted about your problem and hope it helped!
Remember to Thank me!
Click to expand...
Click to collapse
I can't quite do that because the phone doesn't turn on. It goes to the boot screen then shuts off. Then turns on, boot screen, off again. So I can't connect it to the computer or do anything like that.
This thread might help you... ICS flashing is little bit different than GB...
http://forum.xda-developers.com/showthread.php?t=1459767
Sent from my HTC Sensation 4G with Beats
Jagerlowe said:
I can't quite do that because the phone doesn't turn on. It goes to the boot screen then shuts off. Then turns on, boot screen, off again. So I can't connect it to the computer or do anything like that.
Click to expand...
Click to collapse
Can you boot your device into Recovery mode?
Jagerlowe said:
Last night I flashed the gingerbread coredroid ROM and it worked fine. I just didn't really like the looks of some things, so I thought I'd change to a different ROM.
I thought about flashing the ICS Insertcoin ROM, so I flashed it, and it kept trying to boot, but turned off and kept repeating. But then I read that I was supposed to update the firmware, so I took out the SIM card and connected it to the computer and copied the 3.24 RUU to the SD card.
I followed the instructions and the RUU set up properly through HBoot the first time. Then i went in to recovery to wipe data. It had to reboot the phone before I did anything else, and it went back into HBOOT and tried to install the RUU again, but this time it failed due to CID being incorrect! I didn't give it a second thought, but then the insertcoin ROM was doing the same thing, going through the boot up images and shutting off right in the middle, and repeating.
I tried another ICS ROM, Android Revolution, and same result. Failed booting. Then I tried restoring my nandroid backup from before coredroid, and it also kept trying to boot and then shut down. Then I tried coredroid again, and it had the same reaction, failed booting! I redownloaded the ICS RUU 4 times and repeated this process 4 different times, even with other GB versions of insertcoin and ARHD, and no dice!
I'm not entirely tech savvy, so maybe there is soemthing I havent covered yet. Now the RUU fails not because of CID, but because of incorrect Model ID. I read about goldcards, but I can't make a new one because the phone won't even boot! Please help me!
edit: as of now, the phone does not turn on to any rom or homescreen, ONLY Hboot and recovery.
Click to expand...
Click to collapse
did you solve this because i think im having the same issue as you
Mookie_Jones said:
did you solve this because i think im having the same issue as you
Click to expand...
Click to collapse
Can you boot your device into Recovery mode?
CursedBat said:
Can you boot your device into Recovery mode?
Click to expand...
Click to collapse
Yes, I can boot it into recovery and HBOOT, thats it.
Jagerlowe said:
Yes, I can boot it into recovery and HBOOT, thats it.
Click to expand...
Click to collapse
What I am about to guide you through is downgrading your HBoot.
Firstly, download 1.17RUU - CHOOSE WHICH Service Provider, Location (CHOOSE THE RIGHT ONE)
http://forum.xda-developers.com/showthread.php?t=1459767
1. Boot into recovery mode and connect your phone to your computer.
2. Select "mounts and storage"
3. Then select mount sd card.
4. Copy the PG58IMG.zip into the Root of your SD Card.
5. Reboot your phone into bootloader again.
Your phone should automatically prompt you to begin update. After the update,
Your Bootloader should be downgraded. Then Flash a simple - any Gingerbread based ROM, and follow my post on doing SuperCID
Goodluck! Cheers
CursedBat said:
What I am about to guide you through is downgrading your HBoot.
Firstly, download 1.17RUU - CHOOSE WHICH Service Provider, Location (CHOOSE THE RIGHT ONE)
http://forum.xda-developers.com/showthread.php?t=1459767
1. Boot into recovery mode and connect your phone to your computer.
2. Select "mounts and storage"
3. Then select mount sd card.
4. Copy the PG58IMG.zip into the Root of your SD Card.
5. Reboot your phone into bootloader again.
Your phone should automatically prompt you to begin update. After the update,
Your Bootloader should be downgraded. Then Flash a simple - any Gingerbread based ROM, and follow my post on doing SuperCID
Goodluck! Cheers
Click to expand...
Click to collapse
Oh my gosh! Can I like marry you!? You fixed my problem! Thank you so much!
Jagerlowe said:
Oh my gosh! Can I like marry you!? You fixed my problem! Thank you so much!
Click to expand...
Click to collapse
You're welcome I'm just glad to be of any use.
Good luck experimenting with ICS
Cheers!
Hi -- I tried to install CM9 on my Sensation, which seemed to work correctly, but the phone won't get past the boot animation. I thought the problem might have been that I needed to update the firmware to 3.33, which I did following instructions here, but I can't get this to work: the bootloader loads and parses PG58IMG.zip from my SD card, but then doesn't do anything. (No error message either -- just nothing happens.)
I'm running HBOOT 1.27 and ClockworkMod Recovery v5.8.0.9. I'm S-ON and haven't installed SuperCID -- my understanding is that neither of those should be an issue here. I've also repeatedly tried wiping the phone.
Can anyone help?
Thanks!
0. Make sure you are S-OFF (These won't work if you aren't)
Click to expand...
Click to collapse
Firmware update requires S-OFF.
Also if I remember correctly non-Sense ROMs cannot be used if the phone is unlocked through HTCDEV? Not sure about this though.
dshersze said:
Hi -- I tried to install CM9 on my Sensation, which seemed to work correctly, but the phone won't get past the boot animation. I thought the problem might have been that I needed to update the firmware to 3.33, which I did following instructions here, but I can't get this to work: the bootloader loads and parses PG58IMG.zip from my SD card, but then doesn't do anything. (No error message either -- just nothing happens.)
I'm running HBOOT 1.27 and ClockworkMod Recovery v5.8.0.9. I'm S-ON and haven't installed SuperCID -- my understanding is that neither of those should be an issue here. I've also repeatedly tried wiping the phone.
Can anyone help?
Thanks!
Click to expand...
Click to collapse
reflash the rom again from recovery and then
do the extra 1 step from this thread
also read the guide ..its for people on how to flash roms when HTC-DEV unlocked ..as HTC-DEV unlock requires bit different way of flashing
Thank you so much. That fixed the problem and I very much appreciate it. You're a life saver!
ganeshp said:
reflash the rom again from recovery and then
do the extra 1 step from this thread
also read the guide ..its for people on how to flash roms when HTC-DEV unlocked ..as HTC-DEV unlock requires bit different way of flashing
Click to expand...
Click to collapse
Im also having the same problem, tried manually flashing the boot image but no luck still stuck in bootloop, any advice?
my phone is S-on/ Htcdev unlocked Hboot .1.29 with 4ext recovery
Regularfries90 said:
Im also having the same problem, tried manually flashing the boot image but no luck still stuck in bootloop, any advice?
my phone is S-on/ Htcdev unlocked Hboot .1.29 with 4ext recovery
Click to expand...
Click to collapse
Reflash the rom.. Without any wipe this time... But just before flashing the rom.. Enable smartflash in 4EXT- tools
Sent from my HTC Sensation 4G using xda premium
OK.. here is the deal: HTC One S, T-MO, flashed recovery (TWRP), NO ROM would work in the WiFi dept. I tried flashing the radio and no matter what I couldnt get it to flash the 1.5 or 1.84 radio. TWRP would take forever and say it was complete, but the radio version still said 1.04 (or something) in hboot.
Also, I tried going back to a Stock Tmo RUU and it would ALWAYS fail at the signature part of the install EVEN THOUGH I relocked my bootloader.
SO- I unlocked my bootloader, I flashed CWM. Works like a charm.. or so it seems. I flashed the radio and it will only boot into CWM. I can flash a ROM but it still only boots into CWM. I cant even get into fastboot. This sucks.
Ideas anyone?
What happens if you do adb reboot bootloader from your computer while the phone is in CWM?
It reboots, the screen flickers for a millisecond or so (I am sure its probably trying to load hboot and gives some type of error so fast that I can't see) and then it goes to CWM. I am thinking about flashing it back to team win recovery...
mbolden said:
OK.. here is the deal: HTC One S, T-MO, flashed recovery (TWRP), NO ROM would work in the WiFi dept. I tried flashing the radio and no matter what I couldnt get it to flash the 1.5 or 1.84 radio. TWRP would take forever and say it was complete, but the radio version still said 1.04 (or something) in hboot.
Also, I tried going back to a Stock Tmo RUU and it would ALWAYS fail at the signature part of the install EVEN THOUGH I relocked my bootloader.
SO- I unlocked my bootloader, I flashed CWM. Works like a charm.. or so it seems. I flashed the radio and it will only boot into CWM. I can flash a ROM but it still only boots into CWM. I cant even get into fastboot. This sucks.
Ideas anyone?
Click to expand...
Click to collapse
mbolden said:
It reboots, the screen flickers for a millisecond or so (I am sure its probably trying to load hboot and gives some type of error so fast that I can't see) and then it goes to CWM. I am thinking about flashing it back to team win recovery...
Click to expand...
Click to collapse
Try flashing the boot.img thats compatible with your ROM. As for going back to stock try this http://forum.xda-developers.com/showthread.php?t=1927939 If you're on Hboot 1.14 then the T-Mo RUU's wont work for you. I had that problem.
antny said:
Try flashing the boot.img thats compatible with your ROM. As for going back to stock try this http://forum.xda-developers.com/showthread.php?t=1927939 If you're on Hboot 1.14 then the T-Mo RUU's wont work for you. I had that problem.
Click to expand...
Click to collapse
OK.. I thought about that.. but my question is: How can I flash a boot.img if I cant get into fastboot? I installed the trickdroid ROM and I have the boot.img from the zip. I DID try to go back to stock (when I could still access everything pretty easily), but It got stuck on the signature part of the RUU. I went back to trickdroid and all was well sans the WiFi not working.
Can I flash a boot.img via ADB since that is the only thing really working right now?
Thanks
-M
If you still need help...
I'm sure you guys have figured this out by now, but I Solved a problem very similar to this one in my Thread. I was able to return to Stock while still being Rooted.
Feel like a noob posting this, but I've been trying to fix this problem for the past 24hrs with no luck.
This is the first HTC device I've rooted in nearly a year, and I have to say even though it's pretty, I'm really disliking the evita.
I rooted it using Hasoon's toolkit, and other than being unable to install twrp (or cwm), or getting s-off, it all went well. I just pushed twrp 2.5 to my phone and left s-on until the toolkit gets updated. (not sure how to do this using adb, it's been awhile. ) I have a working hboot, fastboot, and twrp install, and even usb mass storage is working from twrp.
Now, the horror begins. I downloaded team vipers jb rom, and it seemed that the flash went perfectly. But it went into a loop and it seemed to have really messed up the internal sd. Couln't mount it, twrp couldn't find it during my attempts to install other roms or even a factory ruu. I found nocturnals sd fix and that worked like magic, but now twrp will not install any other roms, and everytime I try to push a factory ruu I get a parsing error? On my first attempt at restoring a factory ruu, I forgot that my cid was "1111111" and the bootloader was unlocked so it would fail immediatly. But, even with s-on I managed to get my cid to CWS__001 (ATT's cid) and relocked the bootloader temporarily. But this still didn't change things. Don't know if it matters, but I used hasoons toolkit to push the ruu to my phone and it's during this I get parsing errors. Attempting to install a rom through twrp (CM10, a stock rooted rom, etc.) will immediatly fail also. It says "error executing updater binary in zip and something else that I'll post after trying a CM nightly install.
Update: CM Nightly hangs at the HTC splash screen :crying:
Sorry it's alot to read, but I'm feeling lost at this point...
Ayahuascaa said:
Feel like a noob posting this, but I've been trying to fix this problem for the past 24hrs with no luck.
This is the first HTC device I've rooted in nearly a year, and I have to say even though it's pretty, I'm really disliking the evita.
I rooted it using Hasoon's toolkit, and other than being unable to install twrp (or cwm), or getting s-off, it all went well. I just pushed twrp 2.5 to my phone and left s-on until the toolkit gets updated. (not sure how to do this using adb, it's been awhile. ) I have a working hboot, fastboot, and twrp install, and even usb mass storage is working from twrp.
Now, the horror begins. I downloaded team vipers jb rom, and it seemed that the flash went perfectly. But it went into a loop and it seemed to have really messed up the internal sd. Couln't mount it, twrp couldn't find it during my attempts to install other roms or even a factory ruu. I found nocturnals sd fix and that worked like magic, but now twrp will not install any other roms, and everytime I try to push a factory ruu I get a parsing error? On my first attempt at restoring a factory ruu, I forgot that my cid was "1111111" and the bootloader was unlocked so it would fail immediatly. But, even with s-on I managed to get my cid to CWS__001 (ATT's cid) and relocked the bootloader temporarily. But this still didn't change things. Don't know if it matters, but I used hasoons toolkit to push the ruu to my phone and it's during this I get parsing errors. Attempting to install a rom through twrp (CM10, a stock rooted rom, etc.) will immediatly fail also. It says "error executing updater binary in zip and something else that I'll post after trying a CM nightly install.
Update: CM Nightly hangs at the HTC splash screen :crying:
Sorry it's alot to read, but I'm feeling lost at this point...
Click to expand...
Click to collapse
I think that if you don't have S-OFF, you need to manually flash boot.img as well when installing a ROM. Also, I had issues flashing ROMs with TWRP 2.5. Try 2.3.3.1.
watameron said:
I think that if you don't have S-OFF, you need to manually flash boot.img as well when installing a ROM. Also, I had issues flashing ROMs with TWRP 2.5. Try 2.3.3.1.
Click to expand...
Click to collapse
Hmm... That could explain alot.
I'll try it and let you know what happens.
I have tried the 2.3.3.1 build of twrp, but for some reason the touchscreen doesn't work.
Ayahuascaa said:
Hmm... That could explain alot.
I'll try it and let you know what happens.
I have tried the 2.3.3.1 build of twrp, but for some reason the touchscreen doesn't work.
Click to expand...
Click to collapse
What HBOOT version do you have?
Did you install Viper or ViperXL? ViperXL is what you want for the EVITA.
redpoint73 said:
Did you install Viper or ViperXL? ViperXL is what you want for the EVITA.
Click to expand...
Click to collapse
ViperXL JB
and my hboot is 2.14
Ayahuascaa said:
ViperXL JB
and my hboot is 2.14
Click to expand...
Click to collapse
TWRP 2.3.3.1 should have a working touchscreen with hboot 2.14 are you sure you didn't try 2.3.3.0? that one requires you to downgrade touchscreen firmware first.
You need to fastboot flash boot boot.img where boot.img is extracted from the rom you're flashing if you're s-on and hboot >= 1.14.
If you have SuperCID, do not RUU without S-OFF or you really will have a paperweight.
exad said:
TWRP 2.3.3.1 should have a working touchscreen with hboot 2.14 are you sure you didn't try 2.3.3.0? that one requires you to downgrade touchscreen firmware first.
You need to fastboot flash boot boot.img where boot.img is extracted from the rom you're flashing if you're s-on and hboot >= 1.14.
If you have SuperCID, do not RUU without S-OFF or you really will have a paperweight.
Click to expand...
Click to collapse
Hmm.. I could have. I did it last night after two hours of frustration.
And I just did that to a new install of Nocturnal's rom, but with no luck. It still just hangs at the HTC dev warning screen. I'm going to try re downloading the ViperXL rom and hope I just had a bad copy..
heh. I did that without thinking last night and spent an hour trying to reverse the damage I did. Not only did I have s-on, but my cid was still "1111111".
./
Androidfilehost is only giving me ~50Kbps, so viper's rom has 3 hours left,
but Cleanrom is almost done.
Is there anyway to s-off the evita without booting into an os?
If not, can someone point me to a thread explaining how to manually s-off?
It seems that it's the cause for all this trouble I'm having and I've never had to do manually.
Thank you everyone for your help,
my phone still doesn't have a working os but I do feel like I'm getting somewhere.
Edit: How many of you have had problems installing roms with twrp 2.5.5.0? I'm thinking about trying 2.3.3.1. I thought this was what I flashed last night, but my touchscreen didn't work and according to exad's post I probably had the wrong one.
Use twrp 2.3.3.1 all versions above 2.4 have one issue or another.
You need a Rom installed and usb debugging turned on to s-off.
Here's the link: http://forum.xda-developers.com/showthread.php?t=2155071
Sent from my HTC One X using xda app-developers app
exad said:
Use twrp 2.3.3.1 all versions above 2.4 have one issue or another.
You need a Rom installed and usb debugging turned on to s-off.
Here's the link: http://forum.xda-developers.com/showthread.php?t=2155071
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks,
It seems that now 2.5.5.0 just skips the install and tells me that it was successful...
If so that would explain the hangups on the dev screen.
Ayahuascaa said:
Thanks,
It seems that now 2.5.5.0 just skips the install and tells me that it was successful...
If so that would explain the hangups on the dev screen.
Edit: Can you point me to a link for twrp 2.3.3.1? The only thread on xda for that build doesn't have working download links
Click to expand...
Click to collapse
http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.1-evita.img
Md5: d903047e6e871acb8f99834c30eb8307
Sent from my HTC One X using xda app-developers app
exad said:
http://goo.im/devs/OpenRecovery/evita/openrecovery-twrp-2.3.3.1-evita.img
Md5: d903047e6e871acb8f99834c30eb8307
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
CleanRom boots!
Thanks again to everyone who helped and exad for the 2.3.3.1 link,
I decided to update my Dev unlocked Sensation to ICS, but had forgotten it was probably still on a Gingerbread radio. Now I have no working rom, and for some reason I am unable to flash the original rom (RUU) via the SD card method (PG58IMG).
My CID is HTC__E11 and therefor european roms from RUU should work, but I get the following error message when trying the sd card flash: wrong zipped image. In other cases it wont go further than parsing.
When i try to flash the RUU in ruu mode on the phone I get the following error: 99 unknown fail.
Unfortunately I cannot go back to the rom I was on before, since I dont have it anymore.
So the only thing I have now is TWRP recovery 2.6.3 and unlocked HBOOT 1.27.
Furthermore I am unable to see what my current radio firmware is. I want to flash a jellybean rom.
Does anyone know what to do?
MAsterokki said:
I decided to update my Dev unlocked Sensation to ICS, but had forgotten it was probably still on a Gingerbread radio. Now I have no working rom, and for some reason I am unable to flash the original rom (RUU) via the SD card method (PG58IMG).
My CID is HTC__E11 and therefor european roms from RUU should work, but I get the following error message when trying the sd card flash: wrong zipped image. In other cases it wont go further than parsing.
When i try to flash the RUU in ruu mode on the phone I get the following error: 99 unknown fail.
Unfortunately I cannot go back to the rom I was on before, since I dont have it anymore.
So the only thing I have now is TWRP recovery 2.6.3 and unlocked HBOOT 1.27.
Furthermore I am unable to see what my current radio firmware is. I want to flash a jellybean rom.
Does anyone know what to do?
Click to expand...
Click to collapse
ok would i be correct in thinking that you are s-on? how exactly did you upgrade from gingerbread to ics and have you tried formatting all partitions from twrp?
heavy_metal_man said:
ok would i be correct in thinking that you are s-on? how exactly did you upgrade from gingerbread to ics and have you tried formatting all partitions from twrp?
Click to expand...
Click to collapse
Yes I am S-ON. I did try formatting all partitions from twrp, that didnt help. I also tried cwm, but that didnt help either.
My radio was finally displayed by HBOOT, it is: 11.29A.3504.18_M. I believe this is a ICS radio, so there should be no problem here. Unfortunately i cannot find the RUU that corresponds to that radio and trying to flash another ruu wont work.
To go to ICS I just installed the latest CM11 from Sultan, which works on my other sensation (which is S-OFF). I have also tried other roms, but they all wont boot for some weird reason. For every rom I do a full wipe.
MAsterokki said:
Yes I am S-ON. I did try formatting all partitions from twrp, that didnt help. I also tried cwm, but that didnt help either.
My radio was finally displayed by HBOOT, it is: 11.29A.3504.18_M. I believe this is a ICS radio, so there should be no problem here. Unfortunately i cannot find the RUU that corresponds to that radio and trying to flash another ruu wont work.
To go to ICS I just installed the latest CM11 from Sultan, which works on my other sensation (which is S-OFF). I have also tried other roms, but they all wont boot for some weird reason. For every rom I do a full wipe.
Click to expand...
Click to collapse
If your s-on you need to flash the boot.IMG of your rom from fastboot straight after flashing your rom from recovery pal. But I recommend installing 4ext recovery and enabling its "smart flash" feature and this will do it for you try this and check back pal.
Sent from my Nexus 7 using Tapatalk
heavy_metal_man said:
If your s-on you need to flash the boot.IMG of your rom from fastboot straight after flashing your rom from recovery pal. But I recommend installing 4ext recovery and enabling its "smart flash" feature and this will do it for you try this and check back pal.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Lol I have been doing this for so long with a S-OFF device that I totally forgot about that! Thank you so much, sorry for my stupidity haha. Still weird that I cannot flash RUU though...
MAsterokki said:
Lol I have been doing this for so long with a S-OFF device that I totally forgot about that! Thank you so much, sorry for my stupidity haha. Still weird that I cannot flash RUU though...
Click to expand...
Click to collapse
Its cool pal it is, but then again ruus won't flash unless your bootloader is relocked
Sent from my Nexus 7 using Tapatalk