[Q] Cant flash Coindroid rom or any rom !! - HTC Sensation

Hi All, hopefully i am in the right place.
I have been trying to flash a CoinDroid_V1.5.2 on my Htc Sensation (not a 4g) which is locked to Telstra (Australian telco)
My specs as follows:
Android version: 2.3.4 (ginberbread)
sense: 3.0
Software number: 1.45.841.5
Hboot-S-off: 1.17 (phone is rooted)
cid: 11111111 (i changed the cid using information ive founded on this website)
midG5811000
4EXT Recovery tool installed as well
radio: 10.14.9035.01_m[, tried to flash to radio 11 but the phone kept restaring itself after 5 minutes, so i downgraded it, working fine now.
I have download a file called Android revolution hd super wipe, also the PG58IMG image file, everything that you might think off, but still does not work
I have tried to install the coindroid from the 4EXT utility program, selected coindroid 1.5.2 and started to flash, everything fine so far, but when it finishes i restart the phone and does not load up the rom, it keeps rebooting itself everytime, i have also tried using a different rom called Android_Revolution_HD-Sensation_6.6.4_XE and the screen gets stuck on the beats audio, does not go further than that.
Phone is rooted, s-off working, clockwordmod, 4EXT utility loads up as well...
I dont know what i am doing wrong here, can someone help me out here?
I have also tried doing this method in this thread: http://forum.xda-developers.com/showthread.php?t=1232107
Which basically unlocks your phone, tried it and the phone was unlocked but all my apps and configuration was gone, so went back to the s-off to restore(which did not load the 4ext) and tried to restore my stock rom from s-off, hoping that i can still use it with the phone unlocked. Did not worked at all. It was a miracle that after trying to install the coindroid and failed again, the 4ext when back alive again and i was able to restore the stock rom which works.
Can someone tell me please, what i have done wrong?? i have followed all the necessary steps and yet cant flash any rom
Thanks to all for helping the new newbie

Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867

You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.

Kevc44485 said:
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Click to expand...
Click to collapse
This could be also my problem, however my phone boots fine.
Unfortunately I have no idea where to verify the firmware version. Could you please advise?

Settings/about phone/software information/software number. Ics roms will have 3.xx.xxx.xx software number and gb will have 1.xx.xxx.xx. 3rd post down in sensation general forum will have all the info about firmware that you need. You gotta flash firmware that matches the rom you want. You just download it and flash it before you flash the rom.

For me that's OrDroid 6.0.0...

thank you
SzosszeNET said:
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
Click to expand...
Click to collapse
How can i update hboot? Can you be kind enough to tell me where to go?

how can i ?
SzosszeNET said:
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
Click to expand...
Click to collapse
Kevc44485 said:
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Click to expand...
Click to collapse
I thought i flashed it using the ics firmware!
Where can i find the 3.3x.xxx.x firmware for ics?
Found this: http://forum.xda-developers.com/showthread.php?t=1459767
There are so many firmwares, i do not know which one to use to flash to ics, also, what will happend if i flash to firmware to to ics but then i boot into the stock rom? will it work?

http://forum.xda-developers.com/showthread.php?p=21711154#post21711154 you can find the 3.32.xxx.xx firmware in that link. Get the correct one for you carrier. Make sure you follow any instructions given in all posts. I can tell you where to look but you gotta make sure you follow the instructions given in the developer threads.

Kevc44485 said:
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154 you can find the 3.32.xxx.xx firmware in that link. Get the correct one for you carrier. Make sure you follow any instructions given in all posts. I can tell you where to look but you gotta make sure you follow the instructions given in the developer threads.
Click to expand...
Click to collapse
My mid is: PG5811000
Telco company called : Telstra
my cidnum i dont know which it is, can you give a hand mate?
Also, if a flashed the firmware to ics, can i still be using the normal stock or i have to flash it as well?

According to your first post your cid is 11111111 (supercid). You should be able to use any one of the 3.32 firmware. Your rom has to match the firmware.

yes, it's 11111111
Kevc44485 said:
According to your first post your cid is 11111111 (supercid). You should be able to use any one of the 3.32 firmware. Your rom has to match the firmware.
Click to expand...
Click to collapse
Yes, i downloaded an app called CID GETTER, before i flashed, it said that my cid was TELST001, but now shows 11111111.
My stock rom wont work if i flashed the new Firmware, because it gingerbread and not Ice cream sandwich? Is that correct? Sorry for repeating myself, i just want to get it right.
Regarding the CoinDroid_V1.5.2 or the Android_Revolution_HD-Sensation_6.6.4_XE, they all shall work once i flashed the new firmware because booth are ICS, right?
Thanks mate, i am actually downloading this Firware: cidnum: TELST001
from the website you gave me.
What you reckon?
Ps: Should i update the radio too? or the new rom will update it for me?? This is getting annoying!
Ps1: Once i download the file(firmware) should i flash it trough clockwork recovery or EXT4 ? I am not sure about that.
Thanks for all the helpers out there.

Pinguino Tux said:
Yes, i downloaded an app called CID GETTER, before i flashed, it said that my cid was TELST001, but now shows 11111111.
My stock rom wont work if i flashed the new Firmware, because it gingerbread and not Ice cream sandwich? Is that correct? Sorry for repeating myself, i just want to get it right.
Regarding the CoinDroid_V1.5.2 or the Android_Revolution_HD-Sensation_6.6.4_XE, they all shall work once i flashed the new firmware because booth are ICS, right?
Thanks mate, i am actually downloading this Firware: cidnum: TELST001
from the website you gave me.
What you reckon?
Ps: Should i update the radio too? or the new rom will update it for me?? This is getting annoying!
Ps1: Once i download the file(firmware) should i flash it trough clockwork recovery or EXT4 ? I am not sure about that.
Thanks for all the helpers out there.
Click to expand...
Click to collapse
Flashing Firmware Updates both the bootloader/hboot and radio too.. So you need not worry about radio and all
After you flash this firmware tou can't run your current gb rom. As it's not compatible.. And only ics rom runs.. So after flashing the firmware flash the coindroid/ordroid rom and then you are good to go
Now regarding firmware flashing.. It will be PG58IMG file.. so the method of flashing will be different.. Please for instructions/steps on how to flash the firmware please check in the thread from where you downloaded. The steps are given there
Sent from my pyramid.. Through blazing fast sonic waves

Which rom to start with?
ganeshp said:
Flashing Firmware Updates both the bootloader/hboot and radio too.. So you need not worry about radio and all
After you flash this firmware tou can't run your current gb rom. As it's not compatible.. And only ics rom runs.. So after flashing the firmware flash the coindroid/ordroid rom and then you are good to go
Now regarding firmware flashing.. It will be PG58IMG file.. so the method of flashing will be different.. Please for instructions/steps on how to flash the firmware please check in the thread from where you downloaded. The steps are given there
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Thank you so much, it's all clear now.
I have to flash the firmware (anyone in my case due that my sensation is supercid) Using S-off
Flash then the superwipe for the sensation
Flash the Rom that you like
And that's my problem come, i dont know which rom to start with
I have narrowed my search to this 3:
Coindroid v 1.5.2 ( I read that it's quite a good one)
Ordroid v 5.02 (I have not seen any videos on youtube with the looks of it)
Android_Revolution_HD-Sensation_6.6.4_XE (A good choice as well)
From this 3 roms, which is the latest one? And which one is the one that will work out of the box without you trying to fix either the wifi or something like that
Thanks to all for their responses.

Coindroid and ordroid are same.. I mean coindroid became ordroid.. So ordroid is like an update to coindroid.. And basically these are sense 4 ported rom's.. So they are bound to have some issues.. I heard hot spot and Bluetooth are not working properly.. In OP of the thread the bugs are mentioned... So if you want to try sense 4 go for that
The other one ARHD is pretty stable... This comes under your out of box scenario also INSERT COIN comes under this case...
I'm using IC now and I'm pretty happy with it
Sent from my pyramid.. Through blazing fast sonic waves

So you're running clockwork mod recovery while using the 4ext recovery utility? Before updating use the.utility to flash 4ext recovery, if you flash ordroid there is already the option to superwipe built in when flashing. Be sure to flash 4ext
Sent from my sensational sensation 4g

Related

Old firmware

Hi guys, where can i get the old firmware? I flashed the new firmware to install the new ICS 4.0.3 Sense rom. I didn't like it, so i restored my old ROM. And now i keep getting random reboots which i never get before.
I'm on stock XE rom after flashing new firmware and no problems.
HTC Sensation 4G with Beats Audio
I'm on Miui.us latest version.
Try downloading the orgional rom for your phone and flashing it using the ruu exe file. This will restore the phone back to the orgional bootloader and radio and rom!
Can i just flash the PG58IMG.zip from this thread: http://forum.xda-developers.com/showthread.php?t=1192300
GhostXSeries said:
Try downloading the orgional rom for your phone and flashing it using the ruu exe file. This will restore the phone back to the orgional bootloader and radio and rom!
Click to expand...
Click to collapse
When we flash the RUU...does it remove Root? I installed a custom ICS ROM to try but didn't like it, so I did a NAND restore, but I think the firmware was still updated to the one that was needed to do the ICS, and I find the battery is draining quickly. So I would like to revert back to where it was.
I had though a NAND restore will restore everything including the HBOOT version and the radio...but guess not? So should I just do a RUU thing then?
Thanks
DDeveryday said:
Can i just flash the PG58IMG.zip from this thread: http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
I think the pd58img ur referring to is for CWM not the firmware or radio which is what ur looking for. If you want complete retail stock then find the gingerbread 2.3.4 RUU. If ur looking for 2.3.4/5 customer roms the just flash the rom u want. GB works fine with its firmware. Backwards compatible.
The situation have been getting worse and worse everyday. Now, I couldn't even use my phone for 2 minutes without it rebooting itself. I have tried different ROMs with the same result. And i have already flashed the latest T-mobile firmware which i got from this thread.
And I'm sure its the firmware that's causing the problem. Because the first time booting into android after flashing the ICS firmware, the phone froze during the boot screen.
I'm running
HBOOT- 1.23.0000
RADIO- 10.11.9007.15_M
Click to expand...
Click to collapse

[Q] **PLS HELP!!** how to get back the phone?

I was trying to upgrade the stock rom on my HTC Sensation to revolutionary ICS. Ran the superwipe script and it removed everything from the phone. the phone refuses to boot now. Is there a way I can get my phone back?
I am downloading this stock ROM:
http://forum.xda-developers.com/archive/index.php/t-1226085.html but don't know how to put it on the SD card?
Any help will be much appreciated!
You can boot into revolutionary. Go to mounts and mount usb storage. Then you should be able to copy the rom to the SD and flash it from there
Sent from my HTC Sensation XE with Beats Audio using XDA App
If all else fails and providing you can get the phone to load the HBOOT screen you can try flashing the latest RUU from here
http://forum.xda-developers.com/showthread.php?t=1408961
The file should be run on your PC with the phone connected. You would then of course need to reinstall a custom recovery program again, but that's simple with 4ext recovery updater from the market. Then you can flash the ICS custom ROM of your choice.
The ROM in the link provided says Europe. I had a TMO_US, sensation 4g.
will make any difference/problems using the phone in US? sorry for extremely noob question but just wanted to be sure...
harpyar said:
The ROM in the link provided says Europe. I had a TMO_US, sensation 4g.
will make any difference/problems using the phone in US? sorry for extremely noob question but just wanted to be sure...
Click to expand...
Click to collapse
I would not advise putting a euro ROM onto your phone if you need a us network, I am not sure if it will work.
Try this one
http://forum.xda-developers.com/showthread.php?t=1226085
harpyar said:
I was trying to upgrade the stock rom on my HTC Sensation to revolutionary ICS. Ran the superwipe script and it removed everything from the phone. the phone refuses to boot now. Is there a way I can get my phone back?
I am downloading this stock ROM:
http://forum.xda-developers.com/archive/index.php/t-1226085.html but don't know how to put it on the SD card?
Any help will be much appreciated!
Click to expand...
Click to collapse
it didnt work because you probably didnt flash the new firmware update. if you want to boot ics roms you have to upgrade
You need to flash the latest firmware that's compatible with ICS 4.0.x. Find the thread in the development section, download the PG58IMG.zip and copy it to the root of your /sdcard/. Reboot the phone into fastboot/bootloader. The phone will detect your PG58IMG.zip and ask if you want to flash it. Use volume+ to accept the upgrade. The device will reboot once during this process. Firmware upgraded, old ROM's will now bootloop, ICS roms will work sexily.
tigger69 said:
I would not advise putting a euro ROM onto your phone if you need a us network, I am not sure if it will work.
Try this one
http://forum.xda-developers.com/showthread.php?t=1226085
Click to expand...
Click to collapse
Thanks a lot!
Actually, that's what I got after posting the thread and looking for a stock ROM all night. I have that ROM now. Can't get through the update process though. Downloaded the update, hit Yes, Install now, phone reboots but stays on the exclamation mark screen. Any suggestions please?
should i even worry about the update?
harpyar said:
should i even worry about the update?
Click to expand...
Click to collapse
I wouldn't worry, at least your phone is up and running again.
Please make sure you know what you are doing if you are going to try different roms, etc
tigger69 said:
I wouldn't worry, at least your phone is up and running again.
Please make sure you know what you are doing if you are going to try different roms, etc
Click to expand...
Click to collapse
Yes, I am learning...
Thanks everyone.
Would anyone mind if I ask you to direct me to the appropriate firmware and ROM for ICS? the current hboot here is 1.17.000 and the s/w version is 1.45
harpyar said:
Would anyone mind if I ask you to direct me to the appropriate firmware and ROM for ICS? the current hboot here is 1.17.000 and the s/w version is 1.45
Click to expand...
Click to collapse
Have you gone through revolutionary to S-OFF the phone ? IIRC the Revolutionary HBOOT is 1.17.1111.
IF YOU ARE NOT S-OFF GET S-OFF FIRST.
Assuming you are S-OFF then look at: http://forum.xda-developers.com/showthread.php?t=1459767 Read and re-read the information there.
The 3.12 version (HBOOT 1.23.0000) supports GB and ICS, this is what I'm using as I also want to run CM7.
The 3.24 version (HBOOT 1.27.0000) only supports ICS
That'll get you ICS compatible firmware and radio.
As far as ROM is concerned, take your pick, I'm using Virtuous Inquisition but there are loads there.

[Q] [HELP] Flashing roms/ics/firmwares etc..

so i know ill probably get some "read threads" or negative comments but im just really lost and confused and need some help..
ive been a verizon customer for some time and i finally switched to t-mobile..and i chose as my phone the htc sensation had it for at least 3-4 days and im lovin it..
im lovin the roms that are out for this phone and ive been reading the how to's and noob threads,im not so much of a noob at flashing roms as i did flash lots of roms before but considering as im new to the htc sensation im alil confused on how to be flashing roms for this phone
i see lots and lots of firmwares and radios idk whats what.. i want to flash a sense 3.6 or sense 4.0 rom with ics i did try one but it got me to a bootloop.. i do have s-off and i am rooted.. i flashed this [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable .. it got to boot animation then bootloop
my question is what will i need to flash roms for this phone.. firmwares/radios ect.. yes i know s-off and root which i already have,im running completly stock just with s-off and root
any help i can get please will be much appreciated,thanks a whole lot.. and to all the devs that put there hard work into makin great roms for this phone,thanks
Ok heres the best aosp setup.
Virtuous inquisition 4.
For sense ics roms id go with mike1986 arhd 6.5.3 rom.
So what u need to do is root ur sensation
Supercid
Flash 4ext recovery. Its an apk and easy to do
Upgrade ur firmware to 3.32. Flash in bootloader.
Need mike1986 superwipe script
Rom of your choice.
Boot into recovery. Flash the superwipe. Then flash ur rom. Quick run down of what you need to do.
Skill required? Not much. The hardest part might be using adb and fastboot commands for the supercid. Other than that its easy as pie
HTC Sensation FAUX G
«Virtuous Inquisition 4.0 ICS»
«6.5.3 ARHD Sense 4.0.3»
*VabeachFC*
vabeachfc3s said:
Ok heres the best aosp setup.
Virtuous inquisition 4.
For sense ics roms id go with mike1986 arhd 6.5.3 rom.
So what u need to do is root ur sensation
Supercid
Flash 4ext recovery. Its an apk and easy to do
Upgrade ur firmware to 3.32. Flash in bootloader.
Need mike1986 superwipe script
Rom of your choice.
Boot into recovery. Flash the superwipe. Then flash ur rom. Quick run down of what you need to do.
Skill required? Not much. The hardest part might be using adb and fastboot commands for the supercid. Other than that its easy as pie
HTC Sensation FAUX G
«Virtuous Inquisition 4.0 ICS»
«6.5.3 ARHD Sense 4.0.3»
*VabeachFC*
Click to expand...
Click to collapse
thanks so much,so now the supercid i read up on it while requiring s-off and root thats alil confusing but ill read up on it again and the superwipe ive been seeing that on rom threads "flash superwipe" what is that and where would i get it?
and i need a big help,i tried upgrading my firmware to 3.32 and it said "wrong cid" "fail" now its stuck on the htc logo and bootloops help please :'(
Superwipe is down toward the bottom of OP of this thread. It leaves you with a very very clean phone. So no apps, no user data, no ROM. You'd want to have a nandroid backup at the very least before superwiping, as well as titanium backup for your apps etc. You just flash superwipe from recovery like a ROM (install .zip from sdcard).
Sounds like you've got hold of the wrong firmware for your CID. So you either need to know your CID (if you've got your head around adb and fastboot commands, "fastboot getvar cid" will get that for you) and find the right firmware, or supercid your phone so you can use any firmware. Go to this thread for firmware.
For your firmware there's a file,
android.txt, that has a list of CIDs. The T-Mobile CID usually isn't in it. If you do the superCID you shouldn't have to worry about it. Other wise you have to open the file located in the PGM581000 file and add CIDT-MO010 to the txt file. Either way make sure you delete the PGM file immediately after you flash it.
Sent from my HTC Sensation ICS 4.0.3 ARHD 6.5.3XE. Rockin'
Go to the dev thread for ROMs, ARHD is my preference. Good directions and all the files you need linked right there. Well most ROM threads are that way but this ROM and firmware are smooth and flawless.
vabeachfc3s said:
Ok heres the best aosp setup.
Virtuous inquisition 4
Click to expand...
Click to collapse
This is misleading and not really true. First of all, VI is not true AOSP but Sense with most of the obviously sense parts removed. Secondly OpenSensation CM9 is hands down the best true AOSP rom and now that it has bluetooth and 1080p camcorder there's virtually no reason to use a senseless sense rom like vi.
to everyone that has tried to help me on this, THANK YOU ALL SO MUCH! giving me all the infos and quick break downs..
now i do have my phone up and running again but heres what i did..
when i learned that you need to upgrade your firmware to flash ics roms
i went to here http://forum.xda-developers.com/showthread.php?t=1412618 and i downloaded Firmware from 3.32.401.x & 3.32.401.10x RUU and renamed it to PG58IMG.zip i booted up to hboot and when it read the image file it said "wrong cid" "fail" i tried to boot up the phone normally after and it got stuck on the htc logo then bootlooped from there.. i did have a stock backup but flashing that over didnt work still had the same htc logo bootloop, i still had [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable saved to my sdcard so i tried to flash that to see what would happen and got the same result i then went to here.. http://forum.xda-developers.com/showthread.php?t=1459767 and downloaded firmware 3.32 Unlocked and renamed it to PG58IMG.zip booted up into hboot it did its thing but this time it successfully flashed.. i booted the phone back up and the rom and phone successfully booted up completly. now im running on [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable as my rom and im just lovin it! but at this point im kinda scared to flash anything else as i do have it booted up i dont wanna mess anything up again lol
marcviado said:
to everyone that has tried to help me on this, THANK YOU ALL SO MUCH! giving me all the infos and quick break downs..
now i do have my phone up and running again but heres what i did..
when i learned that you need to upgrade your firmware to flash ics roms
i went to here http://forum.xda-developers.com/showthread.php?t=1412618 and i downloaded Firmware from 3.32.401.x & 3.32.401.10x RUU and renamed it to PG58IMG.zip i booted up to hboot and when it read the image file it said "wrong cid" "fail" i tried to boot up the phone normally after and it got stuck on the htc logo then bootlooped from there.. i did have a stock backup but flashing that over didnt work still had the same htc logo bootloop, i still had [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable saved to my sdcard so i tried to flash that to see what would happen and got the same result i then went to here.. http://forum.xda-developers.com/showthread.php?t=1459767 and downloaded firmware 3.32 Unlocked and renamed it to PG58IMG.zip booted up into hboot it did its thing but this time it successfully flashed.. i booted the phone back up and the rom and phone successfully booted up completly. now im running on [ROM][Sense 4.0][MAR.25] OrDroid 1.7.2 | Fast & Stable as my rom and im just lovin it! but at this point im kinda scared to flash anything else as i do have it booted up i dont wanna mess anything up again lol
Click to expand...
Click to collapse
Good to hear you're up and running again just a question, at any point in that process did you check your CID? Which 3.32 firmware did you download from the second link?
goatee84 said:
Good to hear you're up and running again just a question, at any point in that process did you check your CID? Which 3.32 firmware did you download from the second link?
Click to expand...
Click to collapse
in the second link i downloaded the t-mobile unlocked 3.32 firmware, i just checked the modelid: PG5813000 which matched mine so i went for it..
i have one more question though..the supercid can i do that while running on a custom ics rom or it doesnt matter? will it still work regardless?
marcviado said:
in the second link i downloaded the t-mobile unlocked 3.32 firmware, i just checked the modelid: PG5813000 which matched mine so i went for it..
i have one more question though..the supercid can i do that while running on a custom ics rom or it doesnt matter? will it still work regardless?
Click to expand...
Click to collapse
It will work, can be done anytime.
Sent from my HTC Pyramid using xda premium
stringer7 said:
It will work, can be done anytime.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
thanks,so i just got done doing the supercid and confirmed 11111111 so now i can flash any firmware/roms ? sorry im still abit confused on what exactly supercid does and what i can do after..
vabeachfc3s said:
Supercid
Flash 4ext recovery. Its an apk and easy to do
Upgrade ur firmware to 3.32. Flash in bootloader.
Click to expand...
Click to collapse
Can I do SuperCID, Flash 4ext recovery, and upgrade firmware without wiping or affecting in any way my current stock (rooted) installation?
marcviado said:
thanks,so i just got done doing the supercid and confirmed 11111111 so now i can flash any firmware/roms ? sorry im still abit confused on what exactly supercid does and what i can do after..
Click to expand...
Click to collapse
CID is carrier identification. The thread you downloaded your T-Mobile firmware from contains firmwares for a variety of CIDs, in other words, specific to whichever carrier your phone came from. SuperCID removes that form of 'branding' and allows you to flash any firmware file, if you look through the list of firmware they can all be flashed to a device with CID 11111111. So essentially we superCID for convenience.
SuperCID has no bearing on what ROMs you can flash, the only consideration is that a particular ROM will require a certain firmware, eg. ICS ROMs need 3.12 base or higher.
Paul22000 said:
Can I do SuperCID, Flash 4ext recovery, and upgrade firmware without wiping or affecting in any way my current stock (rooted) installation?
Click to expand...
Click to collapse
Almost. SuperCID and custom recovery you can do no worries. Firmware upgrade will depend on what stock ROM is currently installed, if you flash firmware that your stock ROM isn't compatible with you will get bootloops and most likely have to downgrade. So personally I wouldn't be looking to upgrade firmware until you intend to flash a ROM that requires it. At that point you'll want a custom recovery anyway so it won't hurt to install that now.
goatee84 said:
Almost. SuperCID and custom recovery you can do no worries. Firmware upgrade will depend on what stock ROM is currently installed, if you flash firmware that your stock ROM isn't compatible with you will get bootloops and most likely have to downgrade. So personally I wouldn't be looking to upgrade firmware until you intend to flash a ROM that requires it. At that point you'll want a custom recovery anyway so it won't hurt to install that now.
Click to expand...
Click to collapse
Thanks. I'm currently on the T-Mobile Sensation 4G stock ROM S-Off/Rooted. Will going to the 3.32 firmware wipe the stock ROM or cause bootloops for sure?
I also have ClockWork Recovery from a really long time ago. Using ROM Manager to flash a new recovery (trying to update) does nothing. Why does that happen? Perhaps my recovery is too old?
Paul22000 said:
Thanks. I'm currently on the T-Mobile Sensation 4G stock ROM S-Off/Rooted. Will going to the 3.32 firmware wipe the stock ROM or cause bootloops for sure?
I also have ClockWork Recovery from a really long time ago. Using ROM Manager to flash a new recovery (trying to update) does nothing. Why does that happen? Perhaps my recovery is too old?
Click to expand...
Click to collapse
I'm would assume your 4G would already be running ICS? In which case you probably already have up-to-date firmware installed. The firmware update generally applies for people coming from GB to ICS. Go to Settings/About Phone/Software Information/More/Build Number and see what numbers you have there.
Flashing firmware will not wipe your ROM, the worst that will happen is bootloops if the firmware and ROM aren't compatible.
The recovery you have now shouldn't stop you from flashing a new one, instead of using ROM Manager try downloading 4ext from the Play Store and see how that goes.

[Q] Sensation Newb- Locked Bootloader 1.23 CM9 Woes

Yes, I am a newb to the Sensation, but not flashing in general. I have previously had hacked SamVibrant, HD2, and most recently, the G2x, so I know from a constant flasher's POV generally what Im doing.
I've been searching for answers to this for days now, and nothing really seems to work, so let me just start with what is going on.
CURRENT STATS:
-PHONE-TMO Sensation 4g
-S-OFF
-ROOTED
-BOOTLOADER-1.23.0000
-RADIO-10.14.9035.01_M
At the top of the bootloader screen it says ****LOCKED**** Which I am guessing is obviously in refrence to the bootloader itself.
Also I currently have the latest 4EXT recovery flashed. When I got the phone it had CWM 5.00.2 or whatever the latest was.
Just bought a Sensation from a guy on Craigslist, and when I got it, it had a CM7 AOSP ROM running on it. I definitely wanted ICS, so I started reading and trying to get it.
So I started here:
http://forum.xda-developers.com/showthread.php?t=1192300&highlight=hboot+1+23
I tried the PG58IMG.zip install via the bootloader, but kept getting errors and security fails. So I researched more and found a post about how to fix that, but the problem is that there is almost always a need to use Revolutionary, and I can't because it doesn't support the 1.23 bootloader.
I have also tried the PG58DIAG via bootloader, and still got mismatch and security errors.
I also just recently tried flashing back to the "REALSTOCKEXPERIENCE" stock ROM which was successful, but it didn't fix my bootloader or unlock woes. Lastly I tried the HTC dev Unlock, and it would not work, because When I got to the part where it attempts to connect to the phone via USB to do get the identifier token it would not connect. It just kept waiting. I tried resetting my phone and reloading the BL but it would not work.
Also I have noticed that I cannot get my phone to connect VIA USB to the PC when in FASTBOOT or Bootloader. Is that normal?
Please help a brother get some ICS on my new phone! I loved my HD2, although it was a bi#$% to flash sometimes, I loved it, and that is why I went with HTC again. This all makes me miss my Vibrant, where you could flash all day long and root without a computer... Good times....
You're already s-off, so most of the work has already been done for you. Make sure you have fast boot unchecked in power options in your current rom. After that, all that's left to do is check your cid. If you're supercid, then grab any 3.32 base firmware from one of the many rom threads in our dev forum, install it via bootloader, remove the firmware file from sd card (do it from pc after you power down the phone), then flash a rom. This will also upgrade your bootloader to 1.27 unlocked and change your radio to the latest. Don't forget to check md5!
If you're not supercid, then you'll need to find kohr-ah's firmware thread because he has corresponding firmware for all cids. Then grab any rom and enjoy.
As for connecting fastboot via USB, you need the htc sync drivers installed on your PC.
Sorry for lack of links. I'm on mobile and searching is a PITA on the phone.
/edit
Make a nandroid backup before you do any of this.
Thanks a bunch. I will give it a go a third time, but that is one of the problems that I am having, is that I can't flash anything via bootloader. I just get tons of errors...
Lets see if the third time is a charm.
EDIT: I still can't use revolutionary for Super CID because the bootloader is 1.23, but I used a Terminal window and the getprop ro.cid/mid and got this:
Cid-T-MOB010.... is this super CID'd?? I was looking for a reference post, but cant remember where I found it before.
no you are not super cid, it would say 111111. But your good everything is already done really.... Go to kor ah's noob friendly firmware thread, find the 3.32 firmware from T-Mobile with the tmobo10 included. Put it on the root if your SD and there you go flash an ics rom. Just remember to delete it after.
Sent from my HTC Sensation Z710e using xda premium
delete this please
wadill said:
no you are not super cid, it would say 111111. But your good everything is already done really.... Go to kor ah's noob friendly firmware thread, find the 3.32 firmware from T-Mobile with the tmobo10 included. Put it on the root if your SD and there you go flash an ics rom. Just remember to delete it after.
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
^^ This. Kohr-Ah's thread is the way to go then.
On a side note, you might be able to write supercid after flashing the 1.27 bootloader because the one floating around is already unlocked by revolutionary. Why bother? Because it'll make things easier if we have to upgrade our firmware again in the future.
antiparadigm said:
Thanks a bunch. I will give it a go a third time, but that is one of the problems that I am having, is that I can't flash anything via bootloader. I just get tons of errors...
Lets see if the third time is a charm.
EDIT: I still can't use revolutionary for Super CID because the bootloader is 1.23, but I used a Terminal window and the getprop ro.cid/mid and got this:
Cid-T-MOB010.... is this super CID'd?? I was looking for a reference post, but cant remember where I found it before.
Click to expand...
Click to collapse
Forget Revolutionary. You are already S-OFF so you don't need the tool any more. All you need to do is flash the 3.32 firmware (it comes with HBOOT 1.27, ICS won't boot on 1.23) from >here<, and SuperCID (look here at step 4: http://forum.xda-developers.com/showthread.php?t=1192300).
Okay, I am on the right track now. I hunted and hunted, and finally found a PG58IMG that would flash on my bootloader. That put me on the 1.27 bootloader which allowed me to flash the unlocked 1.17 Bootloader which previously would not flash. now I am trying to get the RUU to flash me back to a non-Rooted ROM so I can reflash the 3.32 and then ICS... Once again, I miss my Vibrant's flashing simplicity... but it will all be worth it.
Thanks for your assistance, everyone with positive non-flaming comments. Expect your thanks buttons to get some love!
Someone else correct me if I'm wrong here due to misunderstanding that last post...
But if you're on the 1.17 bootloader unlocked and everything is smooth there, you should be able to flash the 3.32 firmware right not, then flash whatever ICS ROM you want. The current ROM should have no bearing on this. There is no reason to flash to a non rooted ROM just so you can immediately flash a new ROM.
You just need to have either Clockwork or 4EXT recovery installed to flash the ROM. (And you'll need 4EXT to flash a couple of them. Not all will work with Clockwork)
antiparadigm said:
Okay, I am on the right track now. I hunted and hunted, and finally found a PG58IMG that would flash on my bootloader. That put me on the 1.27 bootloader which allowed me to flash the unlocked 1.17 Bootloader which previously would not flash. now I am trying to get the RUU to flash me back to a non-Rooted ROM so I can reflash the 3.32 and then ICS... Once again, I miss my Vibrant's flashing simplicity... but it will all be worth it.
Thanks for your assistance, everyone with positive non-flaming comments. Expect your thanks buttons to get some love!
Click to expand...
Click to collapse
Thanks for the thanks.
Though once you had the 1.27 revolutionary bootloader, you could've just flashed an ICS rom right then and there and been done with the whole thing. The 1.27 bootloader that's floating around actually comes from the 3.32 (rom base) firmware so you would have been good to go. You really didn't need to revert to 1.17 hboot and flash a non rooted rom.
Don't worry, it really is easy flashing a Sensation, you'll see. It's just that a lot of our guides are outdated and end up confusing people who come into the scene post gingerbread.
/edit
Skipjacks is right. You can go from 1.17 hboot to 1.27 hboot (3.32 rom base firmware) without worrying about your current rom.
I had tried to flash the ICS Rom several times, only to have Boot loops and get stuck. I was following several guides posted here that say that you have to be on a non-rooted rom. I will give it another go to see if there is any change.
That's really weird. Which ICS rom are you trying to flash?
Did you get the T-MOB010 3.32 firmware from here and make sure md5 was correct? This firmware is really the only prerequisite for flashing a 3.32 base ICS rom.
Just keep in mind that 3.32 firmware only works for ICS and will bootloop a gingerbread rom.
There's a really good and simple step by step on how to flash ICS in the first post on the link. Check it out.
OMG It Works! I was boot looping like crazy and could not get anything to boot!
I am not sure but I think the problem may have been the radio, or the wrong Firmware for my CID. My phone would not work with the adb Radio.imgthough so I left it alone.
Correct me if I am wrong on the radio idea, but I flashed the 3.32 and I would get stuck at the White HTC screen. Tried SuperWiping and Flashing three different Roms and no-go.
Then I found this thread:
http://forum.xda-developers.com/showthread.php?t=1459767
I downloaded the right one per my TMO CID and was able to flash it, which also updated the Radio. After another superwipe and Rom Flashing, it worked!
THanks again for all of the help. You are all really appreciated. ALong with this whole community.
Haha that's Kohr-Ah's thread where we were telling you to go to for 3.32 firmware.
Honestly, I'm not really sure what was causing your bootlooping. There's so many little things that could cause a bootloop, it's hard to pinpoint. But hey you've got it running now so it's all good.
Welcome to ICS and welcome to the Sensation community.

which stable ICS rom

Hi guys,
After a lot of effort i managed to:
unlock bootloader
install CW 5
root the device
Now i need a reccomendation for an ICS or JB rom.
I need everything completely stable, that is highest priority, and after that comes the speed.
Please advise also about which kernel if i do need to change it?
I'm currently on GB.
I want to upgrade only with install zip from sd card if possible, from CW5 or whichever.
THANKS!
If you want an ics rom you will have to update your firmware to ics firmware which is 3.33 or 3.32.I believe you must be s off in order to do this. If your on gb right now to load any ics rom firmware must be updated.then once your ready I recommend to try out several roms for yourself and see which meets your needs best. Depending on your Rom, different kernels can be tired with the different roms. I'm running paranoid Android by Dragun Korr, it's jelly bean. My kernel is 3.0 51 by Dragun. I really love this rom. It's smooth fast and stable. However I suggest you try out several because everyone is different and has different opinions. It's always best to try for yourself and make your own conclusion. Hope this is helpful. Best wishes. Remember to do your nandroid backup before flashing so you can return to your old rom if need be. As long as firmware matches.
Have fun and experiment. I also recommend 4ext recovery. Some roms require it. And it's really a great recovery!
Sent from my HTC Sensation
thanks a lot, i will try paranoid
can you please tell me how to upgrade to firmware 3.3? can i do it now while i'm still on GB?
Astral07 said:
thanks a lot, i will try paranoid
can you please tell me how to upgrade to firmware 3.3? can i do it now while i'm still on GB?
Click to expand...
Click to collapse
see here http://forum.xda-developers.com/showthread.php?t=1459767
i suggest you first flash 3.32fw then 3.33fw
but you must be S-OFF in order to ugrade your fw version
hm, when i tried to flash 3.33 i got installation aborted
didn't i s-off when i unlocked the bootloader? is it a different thing?
Astral07 said:
hm, when i tried to flash 3.33 i got installation aborted
didn't i s-off when i unlocked the bootloader? is it a different thing?
Click to expand...
Click to collapse
yes it is different
edit:i saw that you are still in GB rom, that means it cames with 1.17-1.18 hboot version
you can S-OFF with this method http://revolutionary.io/
yes, it was 1.18
i did it now and when it asked me to install recovery, i skipped it since i already have it, i hope that is ok
gonna try to flash RUU now
Astral07 said:
yes, it was 1.18
i did it now and when it asked me to install recovery, i skipped it since i already have it, i hope that is ok
gonna try to flash RUU now
Click to expand...
Click to collapse
flash ruu for what reason?
what is your hboot version now?
did you achieve S-OFF?
i ment flash firmware
1.7 hboot
it looked like s-off was good, how can i check?
again i got installation aborted for firmware
Astral07 said:
i ment flash firmware
1.7 hboot
it looked like s-off was good, how can i check?
again i got installation aborted for firmware
Click to expand...
Click to collapse
ok then
switch off your device
remove battery
insert it again
then hold power button and volume down together until it shows you the bootloader screen
in the top of the screen it will say S-OFF
now to upgrade firmware just follow the instructions in the link that i provided you
at the top it says PYRAMID PVT SHIP S-OFF RL
i went into recovery again and tried with the 3.32 as suggested and again, installation aborted, what am i doing wrong?
by the way, i really appreciate the support, it's a lot easier with this kind of help, and i work as a support member for other stuff so i know how it is..
Astral07 said:
at the top it says PYRAMID PVT SHIP S-OFF RL
i went into recovery again and tried with the 3.32 as suggested and again, installation aborted, what am i doing wrong?
by the way, i really appreciate the support, it's a lot easier with this kind of help, and i work as a support member for other stuff so i know how it is..
Click to expand...
Click to collapse
that is your mistake.see the bold one as marked
upgrading the firmware version it can be done only via bootloader
it is not like roms or kernels.
see again the steps in the link on how to upgrade the firmware.you missed something
and yes you are S-OFF
yeah, it should find the new zip automatically, the problem is that i didn't get that
but you are correct, i tried again and now it worked!
installing new ROM now, finally
hopefully that will go without problems
thanks again
Hi also 4ext recovery is recommended. You can get download on xda or play store. It's really a great recovery and almost all use it. Its very easy to use and I believe some roms require it. You can download after installation of rom. If you have issues with download try 4ext. You won't be sorry. It's a great recovery
Sent from my HTC Sensation
thanks,
yes i've been using it since the first guy responded i should try 4ext
not bad, i admit
Hi there.
I strongly suggest Android Revolution HD. I've been using it now for almost 2 weeks and its rock solid.
Its very smooth with decent battery life and you get some sick mods for it!
There is a link to the ROM in my signature.

Categories

Resources