Related
Hi All, hopefully i am in the right place.
I have been trying to flash a CoinDroid_V1.5.2 on my Htc Sensation (not a 4g) which is locked to Telstra (Australian telco)
My specs as follows:
Android version: 2.3.4 (ginberbread)
sense: 3.0
Software number: 1.45.841.5
Hboot-S-off: 1.17 (phone is rooted)
cid: 11111111 (i changed the cid using information ive founded on this website)
midG5811000
4EXT Recovery tool installed as well
radio: 10.14.9035.01_m[, tried to flash to radio 11 but the phone kept restaring itself after 5 minutes, so i downgraded it, working fine now.
I have download a file called Android revolution hd super wipe, also the PG58IMG image file, everything that you might think off, but still does not work
I have tried to install the coindroid from the 4EXT utility program, selected coindroid 1.5.2 and started to flash, everything fine so far, but when it finishes i restart the phone and does not load up the rom, it keeps rebooting itself everytime, i have also tried using a different rom called Android_Revolution_HD-Sensation_6.6.4_XE and the screen gets stuck on the beats audio, does not go further than that.
Phone is rooted, s-off working, clockwordmod, 4EXT utility loads up as well...
I dont know what i am doing wrong here, can someone help me out here?
I have also tried doing this method in this thread: http://forum.xda-developers.com/showthread.php?t=1232107
Which basically unlocks your phone, tried it and the phone was unlocked but all my apps and configuration was gone, so went back to the s-off to restore(which did not load the 4ext) and tried to restore my stock rom from s-off, hoping that i can still use it with the phone unlocked. Did not worked at all. It was a miracle that after trying to install the coindroid and failed again, the 4ext when back alive again and i was able to restore the stock rom which works.
Can someone tell me please, what i have done wrong?? i have followed all the necessary steps and yet cant flash any rom
Thanks to all for helping the new newbie
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Kevc44485 said:
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Click to expand...
Click to collapse
This could be also my problem, however my phone boots fine.
Unfortunately I have no idea where to verify the firmware version. Could you please advise?
Settings/about phone/software information/software number. Ics roms will have 3.xx.xxx.xx software number and gb will have 1.xx.xxx.xx. 3rd post down in sensation general forum will have all the info about firmware that you need. You gotta flash firmware that matches the rom you want. You just download it and flash it before you flash the rom.
For me that's OrDroid 6.0.0...
thank you
SzosszeNET said:
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
Click to expand...
Click to collapse
How can i update hboot? Can you be kind enough to tell me where to go?
how can i ?
SzosszeNET said:
Hi,
Regarding CoinDroid, most links are broken.
Re-download and verify md5 sum.
Alternatively try OrDroid.
Same developer and as I see almost the same rom.
And update hboot
http://forum.xda-developers.com/showthread.php?t=1656867
Click to expand...
Click to collapse
Kevc44485 said:
You didn't follow all necessary steps. You gotta flash 3.3x.xxx.x firmware for ics. Your 1.45.xxx.x firmware you have now is for gb. That's why it wont boot.
Click to expand...
Click to collapse
I thought i flashed it using the ics firmware!
Where can i find the 3.3x.xxx.x firmware for ics?
Found this: http://forum.xda-developers.com/showthread.php?t=1459767
There are so many firmwares, i do not know which one to use to flash to ics, also, what will happend if i flash to firmware to to ics but then i boot into the stock rom? will it work?
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154 you can find the 3.32.xxx.xx firmware in that link. Get the correct one for you carrier. Make sure you follow any instructions given in all posts. I can tell you where to look but you gotta make sure you follow the instructions given in the developer threads.
Kevc44485 said:
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154 you can find the 3.32.xxx.xx firmware in that link. Get the correct one for you carrier. Make sure you follow any instructions given in all posts. I can tell you where to look but you gotta make sure you follow the instructions given in the developer threads.
Click to expand...
Click to collapse
My mid is: PG5811000
Telco company called : Telstra
my cidnum i dont know which it is, can you give a hand mate?
Also, if a flashed the firmware to ics, can i still be using the normal stock or i have to flash it as well?
According to your first post your cid is 11111111 (supercid). You should be able to use any one of the 3.32 firmware. Your rom has to match the firmware.
yes, it's 11111111
Kevc44485 said:
According to your first post your cid is 11111111 (supercid). You should be able to use any one of the 3.32 firmware. Your rom has to match the firmware.
Click to expand...
Click to collapse
Yes, i downloaded an app called CID GETTER, before i flashed, it said that my cid was TELST001, but now shows 11111111.
My stock rom wont work if i flashed the new Firmware, because it gingerbread and not Ice cream sandwich? Is that correct? Sorry for repeating myself, i just want to get it right.
Regarding the CoinDroid_V1.5.2 or the Android_Revolution_HD-Sensation_6.6.4_XE, they all shall work once i flashed the new firmware because booth are ICS, right?
Thanks mate, i am actually downloading this Firware: cidnum: TELST001
from the website you gave me.
What you reckon?
Ps: Should i update the radio too? or the new rom will update it for me?? This is getting annoying!
Ps1: Once i download the file(firmware) should i flash it trough clockwork recovery or EXT4 ? I am not sure about that.
Thanks for all the helpers out there.
Pinguino Tux said:
Yes, i downloaded an app called CID GETTER, before i flashed, it said that my cid was TELST001, but now shows 11111111.
My stock rom wont work if i flashed the new Firmware, because it gingerbread and not Ice cream sandwich? Is that correct? Sorry for repeating myself, i just want to get it right.
Regarding the CoinDroid_V1.5.2 or the Android_Revolution_HD-Sensation_6.6.4_XE, they all shall work once i flashed the new firmware because booth are ICS, right?
Thanks mate, i am actually downloading this Firware: cidnum: TELST001
from the website you gave me.
What you reckon?
Ps: Should i update the radio too? or the new rom will update it for me?? This is getting annoying!
Ps1: Once i download the file(firmware) should i flash it trough clockwork recovery or EXT4 ? I am not sure about that.
Thanks for all the helpers out there.
Click to expand...
Click to collapse
Flashing Firmware Updates both the bootloader/hboot and radio too.. So you need not worry about radio and all
After you flash this firmware tou can't run your current gb rom. As it's not compatible.. And only ics rom runs.. So after flashing the firmware flash the coindroid/ordroid rom and then you are good to go
Now regarding firmware flashing.. It will be PG58IMG file.. so the method of flashing will be different.. Please for instructions/steps on how to flash the firmware please check in the thread from where you downloaded. The steps are given there
Sent from my pyramid.. Through blazing fast sonic waves
Which rom to start with?
ganeshp said:
Flashing Firmware Updates both the bootloader/hboot and radio too.. So you need not worry about radio and all
After you flash this firmware tou can't run your current gb rom. As it's not compatible.. And only ics rom runs.. So after flashing the firmware flash the coindroid/ordroid rom and then you are good to go
Now regarding firmware flashing.. It will be PG58IMG file.. so the method of flashing will be different.. Please for instructions/steps on how to flash the firmware please check in the thread from where you downloaded. The steps are given there
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Thank you so much, it's all clear now.
I have to flash the firmware (anyone in my case due that my sensation is supercid) Using S-off
Flash then the superwipe for the sensation
Flash the Rom that you like
And that's my problem come, i dont know which rom to start with
I have narrowed my search to this 3:
Coindroid v 1.5.2 ( I read that it's quite a good one)
Ordroid v 5.02 (I have not seen any videos on youtube with the looks of it)
Android_Revolution_HD-Sensation_6.6.4_XE (A good choice as well)
From this 3 roms, which is the latest one? And which one is the one that will work out of the box without you trying to fix either the wifi or something like that
Thanks to all for their responses.
Coindroid and ordroid are same.. I mean coindroid became ordroid.. So ordroid is like an update to coindroid.. And basically these are sense 4 ported rom's.. So they are bound to have some issues.. I heard hot spot and Bluetooth are not working properly.. In OP of the thread the bugs are mentioned... So if you want to try sense 4 go for that
The other one ARHD is pretty stable... This comes under your out of box scenario also INSERT COIN comes under this case...
I'm using IC now and I'm pretty happy with it
Sent from my pyramid.. Through blazing fast sonic waves
So you're running clockwork mod recovery while using the 4ext recovery utility? Before updating use the.utility to flash 4ext recovery, if you flash ordroid there is already the option to superwipe built in when flashing. Be sure to flash 4ext
Sent from my sensational sensation 4g
Does the 1.06 hboot (just downgraded yesterday) allow you to flash roms without flashing the boot.img seperately or is that only possible with S-Off? I reverted my supercid back to TMOB-010 after downgrading if that makes any diff.
Daiskei said:
Does the 1.06 hboot (just downgraded yesterday) allow you to flash roms without flashing the boot.img seperately or is that only possible with S-Off? I reverted my supercid back to TMOB-010 after downgrading if that makes any diff.
Click to expand...
Click to collapse
If you use TWRP then it does, its the reason I downgraded.
I'll sneak in a question here...
Apart from the official OTA not working, which doesnt work with unlocked bootloader anyway, is there any downside with downgrading hboot?
Im still not sure why the hboot would need downgrading, but everyones talking about it so I guess there gotta be a reason for it lol
Goatshocker said:
I'll sneak in a question here...
Apart from the official OTA not working, which doesnt work with unlocked bootloader anyway, is there any downside with downgrading hboot?
Im still not sure why the hboot would need downgrading, but everyones talking about it so I guess there gotta be a reason for it lol
Click to expand...
Click to collapse
OTA can be flashed on unlocked bootloader but need to have stock recovery. there is no downsides but a bunch of upsides like TWRP flashing boot.img also change radio and wifi partitions and also do this sweet mod.
Concur with Darknites--
I was lucky and got .06 "out of the box". Don't need ADB/Fastboot/Flash Image GUI for boot images.
Can flash all roms with boot image inside them and any radio/recovery I want thru Fastboot.
Only now just started using CM Installer to flash whatever radio I want on CM roms--but, that is a different matter.
I just did the last official OTA update (I actually found nothing wrong with that update except the battery history screen) and now i have Hboot 2.15.
Can I downgrade to Hboot 1.06 (the original Hboot i got with the device) and then root the device?
Thanks
yz250il said:
I just did the last official OTA update (I actually found nothing wrong with that update except the battery history screen) and now i have Hboot 2.15.
Can I downgrade to Hboot 1.06 (the original Hboot i got with the device) and then root the device?
Thanks
Click to expand...
Click to collapse
Yes, you can
Hello all,
So finally, I have managed to S-OFF my phone using JuonoputBear (I never get this spelling right!). Downloaded the latest version for Ubuntu and can't believe I only did the wire trick once and it was done.
But anynow, to my surprise, the JB tool went on installing the JB hboot itself. Initially I thought it would ask me to install it or not and I would refuse it but... it didn't even give me the option. So now I am stuck with the JB hboot which I dont want.
So the questions is, is there any way I can revert back to the stock hboot?
Thanks guys, all your help made it possible for me to S-OFF my phone.
Regards
just to know that with patched hboot you are fully unlocked and you can use all fastboot commands
i don't find a reason to return to official hboot
rzr86 said:
just to know that with patched hboot you are fully unlocked and you can use all fastboot commands
i don't find a reason to return to official hboot
Click to expand...
Click to collapse
Thanks for the reply. The reason I wanted to go back to stock hboot was that its highly unlikely that I would be using those extra fastboot commands. Besides, I dont like the Juoponutbear logo on top of the hboot.
Also, now that I am S-OFF, I am kind of gone sensitive to installing any ROM. I intend to install Android Revolution HD ROM but I dont want to flash anything wrong on my device like Radio etc. I only want to flash whats need to run that new custom ROM. I guess that doesn't include the kernel as I already have ICS stock ROM.
Can anyone point me to the right direction? Where I can find the steps to install custom ROM without any risk of flashing something wrong?
Thanks.
Jeanz Sensation said:
Thanks for the reply. The reason I wanted to go back to stock hboot was that its highly unlikely that I would be using those extra fastboot commands. Besides, I dont like the Juoponutbear logo on top of the hboot.
Also, now that I am S-OFF, I am kind of gone sensitive to installing any ROM. I intend to install Android Revolution HD ROM but I dont want to flash anything wrong on my device like Radio etc. I only want to flash whats need to run that new custom ROM. I guess that doesn't include the kernel as I already have ICS stock ROM.
Can anyone point me to the right direction? Where I can find the steps to install custom ROM without any risk of flashing something wrong?
Thanks.
Click to expand...
Click to collapse
Hi,
There is no way you can "Accidently" install a radio.
You are not in bootloader for any length of time normally,so ,it should not matter what is written at the top.
That is just the way Juoponutbear operates and leaves it's mark.
It is the only way to s-off for you,so ,you are stuck with it.
Unless you s-on again.
As for flashing ROMS,put it on the root of your sd card,choose zip,install zip.
That's it.
EDIT:
Someone correct me if I am wrong.
If you flash Kohr-Ah's Universal 3.33 firmware,does it say Universal at the top?
malybru said:
As for flashing ROMS,put it on the root of your sd card,choose zip,install zip.
That's it.
Click to expand...
Click to collapse
Is that all? I thought that once you have flashed the zip package, you have to extract the "boot.img" from that zip package of the ROM and flash it separately?
Jeanz Sensation said:
Is that all? I thought that once you have flashed the zip package, you have to extract the "boot.img" from that zip package of the ROM and flash it separately?
Click to expand...
Click to collapse
Hi,
That is the beauty of s-off.
No separate flashing.
malybru said:
Hi,
That is the beauty of s-off.
No separate flashing.
Click to expand...
Click to collapse
Ahh I get it now. Thanks mate.
malybru said:
Hi,
There is no way you can "Accidently" install a radio.
You are not in bootloader for any length of time normally,so ,it should not matter what is written at the top.
That is just the way Juoponutbear operates and leaves it's mark.
It is the only way to s-off for you,so ,you are stuck with it.
Unless you s-on again.
As for flashing ROMS,put it on the root of your sd card,choose zip,install zip.
That's it.
EDIT:
Someone correct me if I am wrong.
If you flash Kohr-Ah's Universal 3.33 firmware,does it say Universal at the top?
Click to expand...
Click to collapse
if i remember well last time kohr-ah said that it it says firmware 3.33(i am not sure)
malybru said:
Hi,
That is the beauty of s-off.
No separate flashing.
Click to expand...
Click to collapse
Sorry I had to come back on this one. I was checking the Android Rev. HD thread and in the download section it said it is necessary to flash new firmware package before flashing this ROM/ And the firmware package also contains radio flashing.
Since I am on Stock ICS at the moment and my firmware is 3.32. Do I still need to flash my firmware?
Jeanz Sensation said:
Sorry I had to come back on this one. I was checking the Android Rev. HD thread and in the download section it said it is necessary to flash new firmware package before flashing this ROM/ And the firmware package also contains radio flashing.
Since I am on Stock ICS at the moment and my firmware is 3.32. Do I still need to flash my firmware?
Click to expand...
Click to collapse
it is not necessary
the rom will boot with that firmware too:good:
Hi
I have this phone, and I want to install MIUI ROM.
Now, I have 2.3.4 (I think 1.45 firmware or something like this).
I made phone S-OFF (HBOOT 1.18 and used revolutionary).
First question: Do I have to unlock my bootloader, also? Because I can't, even <fastboot oem get_identifier_token> doesn't work.
Now, I have download MIUI 3.12.20 from this forum (download link was from official MIUI site).
I Installed recover (CWM), then went into it, wiped system,dalvik,cache and installed MIUI. but it just came till MIUI logo and reboots after a couple of seconds.
So, how to install this rom?
thelast3lack said:
Hi
I have this phone, and I want to install MIUI ROM.
Now, I have 2.3.4 (I think 1.45 firmware or something like this).
I made phone S-OFF (HBOOT 1.18 and used revolutionary).
First question: Do I have to unlock my bootloader, also? Because I can't, even <fastboot oem get_identifier_token> doesn't work.
Now, I have download MIUI 3.12.20 from this forum (download link was from official MIUI site).
I Installed recover (CWM), then went into it, wiped system,dalvik,cache and installed MIUI. but it just came till MIUI logo and reboots after a couple of seconds.
So, how to install this rom?
Click to expand...
Click to collapse
You need to upgrade your firmware to 3.33 universal with that you will have unlocked (3.33 firmware) bootloader
You have gb hboot 1.18.000 thats the problem you need to upgrade your firmware to 3.33 universal here is the link from the thread http://forum.xda-developers.com/show...4#post21711154 make sure to check md5 sum of the downloaded zip, Read the procedure from the link carefully
Mile_zdr said:
You need to upgrade your firmware to 3.33 universal with that you will have unlocked (3.33 firmware) bootloader
You have gb hboot 1.18.000 thats the problem you need to upgrade your firmware to 3.33 universal here is the link from the thread http://forum.xda-developers.com/show...4#post21711154 make sure to check md5 sum of the downloaded zip, Read the procedure from the link carefully
Click to expand...
Click to collapse
Thanks, but link is not complete. It has ... in it.
Anyway I found that 3.33, and flashed it. Then flashed recovery (It removed recovery), then MIUI. It worked!
Thanks again.
Hey guys!!
I've had PAC-ROM on my M4 for quite a long time now, decided to go back to stock because of reasons today.. Everything's fine, used TWRP to recover my stock ROM - I've made a backup
Now, I got the message for the Sense 6 update and I was so happy, it downloaded successfully, everything's well at this point. I click on Install Now and it boots to TWRP and nothing else happens.. I can't find a way to update. Can someone please help? ;/
Thanks in advance!
P.S. Sorry if I haven't posted any helpful information, I don't know what to post So tell me if you need to know anything, I'll share it right away
Peshyy said:
Hey guys!!
I've had PAC-ROM on my M4 for quite a long time now, decided to go back to stock because of reasons today.. Everything's fine, used TWRP to recover my stock ROM - I've made a backup
Now, I got the message for the Sense 6 update and I was so happy, it downloaded successfully, everything's well at this point. I click on Install Now and it boots to TWRP and nothing else happens.. I can't find a way to update. Can someone please help? ;/
)
Click to expand...
Click to collapse
just flash stock recovery instead of custom TWRP
iourikil said:
just flash stock recovery instead of custom TWRP
Click to expand...
Click to collapse
Ok, thanks.. http://forum.xda-developers.com/showpost.php?p=45905821&postcount=2 Is the first mentioned 'here' gonna work? the 1.31.401.1 one?
Thanks again :3
Edit:
I've flashed the 1.31.401.1 and it worked! Currently installing the update ;3
Peshyy said:
Ok, thanks.. http://forum.xda-developers.com/showpost.php?p=45905821&postcount=2 Is the first mentioned 'here' gonna work? the 1.31.401.1 one?
Thanks again :3
Click to expand...
Click to collapse
use recovery.img from this
firmware m4 OTA 3.10.401.4
https://mega.co.nz/#!eBIRwYIR!vGks0Gloq7VpgAD5POrlbBh1HWPfpRIFAxpMahG7Nk4
iourikil said:
use recovery.img from this
firmware m4 OTA 3.10.401.4
URL HIDDEN
Click to expand...
Click to collapse
Ok, thanks! I'll download it right away.. But here's an issue I got while installing the update with the previous recovery.. I get a phone with a red exclamation mark inside a triangle in the middle of updating.. any help ? ;s
Also, can you tell me is there a specific way of installing this recovery? Because there are multiple files and I don't know what to do with all of them ;/
Third edit:
I've just remembered fastboot flashed multiple partitions, so that's what they must be.. so I tried but I get errors on them except boot.img and recovery.img. The radio.img showed an error that the bootloader isn't the correct version or something..
Peshyy said:
Ok, thanks! I'll download it right away.. But here's an issue I got while installing the update with the previous recovery.. I get a phone with a red exclamation mark inside a triangle in the middle of updating.. any help ? ;s
Also, can you tell me is there a specific way of installing this recovery? Because there are multiple files and I don't know what to do with all of them ;/
Third edit:
I've just remembered fastboot flashed multiple partitions, so that's what they must be.. so I tried but I get errors on them except boot.img and recovery.img. The radio.img showed an error that the bootloader isn't the correct version or something..
Click to expand...
Click to collapse
extract file recovery.img from zip archive
and flash it as usual
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot
iourikil said:
extract file recovery.img from zip archive
and flash it as usual
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
I get the same error... the Phone with a red exclamation mark with a triangle around it.. Is it because I'm rooted. I just searched and it might be it..
Should I follow the guide on theunlockr.com / 2014 / 03 / 18 / unroot-htc-one-mini /
So.. Should I only lock the bootloader or completely unroot it?
I'll try with only locking the bootloader in a sec..
Ok, here's what happens when I use fastboot oem lock : snag.gy / CnD59.jpg .. The bootloader shows as "RELOCKED", which is good.. but I still fail to install the update.. But regarding the un-rooting process, on theunlockr what is posted the .exe is US.. I'm from Bulgaria, which is Europe.. and if I download a UK version of the .exe will it still work ?
Edit.. will a tool like Revolutionary work? I saw it just sets the phone to S-OFF
Peshyy said:
Ok, here's what happens when I use fastboot oem lock : snag.gy / CnD59.jpg .. The bootloader shows as "RELOCKED", which is good.. but I still fail to install the update.. But regarding the un-rooting process, on theunlockr what is posted the .exe is US.. I'm from Bulgaria, which is Europe.. and if I download a UK version of the .exe will it still work ?
Edit.. will a tool like Revolutionary work? I saw it just sets the phone to S-OFF
Click to expand...
Click to collapse
I know that you can't get OTA with unlocked bootloader and rooted, and I don't think you can do it with a re-locked bootloader either.
OTA also failed for me with a "locked" bootloader, where i used revone to set the bootloader to Locked rather than Relocked.
The only way i've gotten OTA to install was to run the Att Ruu.exe to restore to stock. If i run update immediately after that, it works. If i do other things, like unlock, root, etc, the oTA fails, just the same as yours is failing.
If you want sense 6, the easiest way, from where you are now, would be to flash twrp 2.7.1.1 recovery, then install the stock sense 6 rom in the development section. If you're not on the latest firmware (hboot 2.22) then the path is a little longer, as you will have to s-off, then update firmware, then flash sense 6 rom.
jollywhitefoot said:
I know that you can't get OTA with unlocked bootloader and rooted, and I don't think you can do it with a re-locked bootloader either.
OTA also failed for me with a "locked" bootloader, where i used revone to set the bootloader to Locked rather than Relocked.
The only way i've gotten OTA to install was to run the Att Ruu.exe to restore to stock. If i run update immediately after that, it works. If i do other things, like unlock, root, etc, the oTA fails, just the same as yours is failing.
If you want sense 6, the easiest way, from where you are now, would be to flash twrp 2.7.1.1 recovery, then install the stock sense 6 rom in the development section. If you're not on the latest firmware (2.22) then the path is a little longer, as you will have to s-off, then update firmware, then flash sense 6 rom.
Click to expand...
Click to collapse
Ok, thanks for the info.. I don't know how to find my firmware.. It doesn't show up on the About phone menu.. I've gone to the bootloader and it isn't there as well.. if it's the hboot, my hboot is 2.21.0000, meaning it isn't 2.22.. ;/
Also.. can you tell me what *** TAMPERED *** means in the bootloader? Right above *** RELOCKED ***.
And what is the 'Att Ruu.exe'? I don't mind having no root, no unlocked bootloader, etc.. I want the pure HTC experience again..
Edit: I saw that 'Att Ruu.exe' stands for the AT&T model.. the thing is that mine isn't AT&T.. mine is international, I think.. doesn't have any other branding or whatsoever..
Peshyy said:
Ok, thanks for the info.. I don't know how to find my firmware.. It doesn't show up on the About phone menu.. I've gone to the bootloader and it isn't there as well.. if it's the hboot, my hboot is 2.21.0000, meaning it isn't 2.22.. ;/
Also.. can you tell me what *** TAMPERED *** means in the bootloader? Right above *** RELOCKED ***.
And what is the 'Att Ruu.exe'? I don't mind having no root, no unlocked bootloader, etc.. I want the pure HTC experience again..
Edit: I saw that 'Att Ruu.exe' stands for the AT&T model.. the thing is that mine isn't AT&T.. mine is international, I think.. doesn't have any other branding or whatsoever..
Click to expand...
Click to collapse
Hboot was what i was referring to when i said firmware. Sorry, but i don't have any experience with 2.21 so i don't know what ROMs you can flash with it. If i had to guess, i would think one of the older sense 5.5 roms in the dev section would work on it, but i've never been on 2.21, so i can't tell you which ones with any confidence. I don't think any of the sense 6 Roms will work for you, but, again, i don't know for sure as i've never been on 2.21.
Tampered i think comes up when you use custom recovery. I don't know exactly what triggers it, but i don't think just flashing custom recovery does. I think it might happen when you use custom recovery to flash a ROM. It's just a flag and nothing to worry about. It doesn't prevent you from doing anything.
RUUs are executable files that can restore your device to stock. They are carrier and location specific, so you need to make sure you use the one for your carrier and location, if it is available. I said ATT RUU becuase I'm on ATT in the US. RUU files aren't available for every carrier in every country. If you are in the US on Att, i can help you with this. If you are somewhere else or on a different carrier, i can't.
jollywhitefoot said:
Hboot was what i was referring to when i said firmware. Sorry, but i don't have any experience with 2.21 so i don't know what ROMs you can flash with it. If i had to guess, i would think one of the older sense 5.5 roms in the dev section would work on it, but i've never been on 2.21, so i can't tell you which ones with any confidence. I don't think any of the sense 6 Roms will work for you, but, again, i don't know for sure as i've never been on 2.21.
Tampered i think comes up when you use custom recovery. I don't know exactly what triggers it, but i don't think just flashing custom recovery does. I think it might happen when you use custom recovery to flash a ROM. It's just a flag and nothing to worry about. It doesn't prevent you from doing anything.
RUUs are executable files that can restore your device to stock. They are carrier and location specific, so you need to make sure you use the one for your carrier and location, if it is available. I said ATT RUU becuase I'm on ATT in the US. RUU files aren't available for every carrier in every country. If you are in the US on Att, i can help you with this. If you are somewhere else or on a different carrier, i can't.
Click to expand...
Click to collapse
Oh, that's a shame ;//
First - is there a way I can update to 2.22 ? ;/
Second - I mentioned earlier I'm from Bulgaria, which is in Europe. Isn't there an international RUU ? ;(
I've unlocked my bootloader again as I think found a way to make the phone S-OFF.. I just have to root my phone again as it's not rooted -__- I don't want a custom ROM download, I want the stock one with no modifications or anything else.. ;/
Peshyy said:
Oh, that's a shame ;//
First - is there a way I can update to 2.22 ? ;/
Second - I mentioned earlier I'm from Bulgaria, which is in Europe. Isn't there an international RUU ? ;(
I've unlocked my bootloader again as I think found a way to make the phone S-OFF.. I just have to root my phone again as it's not rooted -__- I don't want a custom ROM download, I want the stock one with no modifications or anything else.. ;/
Click to expand...
Click to collapse
Sorry. I missed where you said your location.
To upgrade your firmware, you have to s-off. There's a post somewhere around here that walks you through using revone, which I've done and had success with. I think I linked to it yesterday, so look through my old posts. If you can't find it, I'll send the link later.
But, yes, you have to be rooted to s-off.
I don't know about ruu for Bulgaria. Try looking on the HTC website, or your carrier's website.
The stock roms in the dev section seem to be pretty much 100% stock. I'm not a developer, so I don't know that they are for sure, but I think they are created directly from stock, just modified so you can flash then in recovery.
jollywhitefoot said:
Sorry. I missed where you said your location.
To upgrade your firmware, you have to s-off. There's a post somewhere around here that walks you through using revone, which I've done and had success with. I think I linked to it yesterday, so look through my old posts. If you can't find it, I'll send the link later.
But, yes, you have to be rooted to s-off.
I don't know about ruu for Bulgaria. Try looking on the HTC website, or your carrier's website.
The stock roms in the dev section seem to be pretty much 100% stock. I'm not a developer, so I don't know that they are for sure, but I think they are created directly from stock, just modified so you can flash then in recovery.
Click to expand...
Click to collapse
I tried revone about a hundred times with no success.. I just can't get it to work. I get an error 'Segmentation fault (core dumped)' and that's it -__- I tried googling but with no success.. I'm now trying rumrunner but as I look at the command prompt, it most likely won't succeed as well ;/ Yep.. it failed, said ERROR: looks like device is not rooted AND lacks an unsecure kernel. su or FU!!
!
I'm rooted and with unlocked bootloader, installed CWM as well
Edit:
So I found http://forum.xda-developers.com/htc...-official-stock-sense-6-rom-firmware-t2817921 .. I'm gonna try it out now, it's the same as my update, so yeah..
Peshyy said:
I tried revone about a hundred times with no success.. I just can't get it to work. I get an error 'Segmentation fault (core dumped)' and that's it -__- I tried googling but with no success.. I'm now trying rumrunner but as I look at the command prompt, it most likely won't succeed as well ;/ Yep.. it failed, said ERROR: looks like device is not rooted AND lacks an unsecure kernel. su or FU!!
!
I'm rooted and with unlocked bootloader, installed CWM as well
Edit:
So I found http://forum.xda-developers.com/htc...-official-stock-sense-6-rom-firmware-t2817921 .. I'm gonna try it out now, it's the same as my update, so yeah..
Click to expand...
Click to collapse
I got both of those errors and they were because i really wasn't rooted even though i thought i was.
jollywhitefoot said:
I got both of those errors and they were because i really wasn't rooted even though i thought i was.
Click to expand...
Click to collapse
Yeah, I understood that the hard way.. Tried so many things, nothing worked.. just threw my phone (on a soft place, but still) and won't deal with anything 'til tomorrow.. I'm just so pissed at the moment. The root that should work and has worked before doesn't work now.. I really don't know what's wrong -__- gonna do everything all over again and try to get S-OFF and attempt to fix OTA updates.. ;/
Peshyy said:
Yeah, I understood that the hard way.. Tried so many things, nothing worked.. just threw my phone (on a soft place, but still) and won't deal with anything 'til tomorrow.. I'm just so pissed at the moment. The root that should work and has worked before doesn't work now.. I really don't know what's wrong -__- gonna do everything all over again and try to get S-OFF and attempt to fix OTA updates.. ;/
Click to expand...
Click to collapse
Sorry. I've been there before. If i have time, i'll re-set my phone back to factory, s-on and see if i can remember what i did to fix that error. One possibility was that i didn't have a ROM installed, but i don't remember for sure. I'll see if I made any notes let you know if I remember what i did to fix.
jollywhitefoot said:
Sorry. I've been there before. If i have time, i'll re-set my phone back to factory, s-on and see if i can remember what i did to fix that error. One possibility was that i didn't have a ROM installed, but i don't remember for sure. I'll see if I made any notes let you know if I remember what i did to fix.
Click to expand...
Click to collapse
Whoah, thanks so much! You shouldn't be so kind.. That's so much work to do.. Damn ;/ THANKS!
Peshyy said:
Whoah, thanks so much! You shouldn't be so kind.. That's so much work to do.. Damn ;/ THANKS!
Click to expand...
Click to collapse
What's your exact status:
Unlocked or Relocked?
Tampered?
Which recovery?
Version?
Is there an OS installed or did you wipe?
jollywhitefoot said:
What's your exact status:
Unlocked or Relocked?
Tampered?
Which recovery?
Version?
Is there an OS installed or did you wipe?
Click to expand...
Click to collapse
It's Tampered and Unlocked. I totally formatted everything, put CWM and using stock software.. It's the Sense 5.5 with Android 4.4.2. ClockworkMod Recovery Touch 6.0.3.6