Hi.
I need help with my Zopo C2 platinum please.
I was trying to flash CWM via SP Flash tool i loaded scatter from original rom and paste to same folder cwm recovery.img and I selected only preloader and recovery pressed download it told : OK, but then phone was dead. Cant start, no led after putting to charge, nothing.
I need help with unbrick via SP flash tool, if u can help me guys .
Thanks!
bump :X going to text Vondroid rom via sp, hope it works
So I flashed wrong preloader, can someone help me please?
ngsHOi compass
Tomitko186 said:
So I flashed wrong preloader, can someone help me please?
Click to expand...
Click to collapse
Hi.
For me preloader from C3 ROM did the trick!
Load your C2 ROM in SPFT and change the PRELOADER - browse for one from C3 ROM.
(ZOPO C2 Platinum 1/32)
Related
I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
Hi, guys
My phone is bricked after i try install a rom from sp flash tools, my phone was without gsm signal after install cwm.
Now its bricked, i need a rom which i cant flash it with sp flash tools, because i cant enter to recovery and mobile upgrade doesnt find my phone.
Please help me.
Yhizsrhaell said:
Hi, guys
My phone is bricked after i try install a rom from sp flash tools, my phone was without gsm signal after install cwm.
Now its bricked, i need a rom which i cant flash it with sp flash tools, because i cant enter to recovery and mobile upgrade doesnt find my phone.
Please help me.
Click to expand...
Click to collapse
keep calm there is no working roms for this device and u will only go into recovery if u removed the sd card but if u flashed the official rom , the booting will take 30 min !! believe me
Use One Touch Upgrade,is a anti-breaker
Hello My Q-3000 is getting stuck in the boot loop(XOLO Logo ) . Even though I am used Vol+ & power not getting recovery menu ,but odin with red triangle.Please help to solve this problem. I requesting experts to guide me to resolve this issue.
Use Sp flash tool to install stock ROM & u should check ultimate thread
Use Sp flash tool to install stock ROM & u should check ultimate thread
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
vmc809 said:
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
Click to expand...
Click to collapse
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
sachin.r.fulzele said:
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
Click to expand...
Click to collapse
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
No more suggestions, submit phone to Xolo care
Sent from my HM NOTE 1W_MIUI6_5.7.23
vmc809 said:
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
Click to expand...
Click to collapse
Have u followed the procedure mentioned in this post.
04 - Flashing stock ROM using SP flash tools
Unbricking guide.
If u did exactly same then the phone should boot normally.
Also check the battery charging, maybe its not sufficiently charged.
avi3230 said:
Have u followed the procedure mentioned in this post.
Click to expand...
Click to collapse
I've told him, the same earlier, but he replied that he had done it, still no success.
Sent from HM NOTE 1W_MIUI6_5.8.6
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
mujaid714 said:
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
Click to expand...
Click to collapse
It's because u should either install vcom drivers or cynus drivers for xolo q3000, availability of both causing the trouble.
Sent from HM NOTE 1W_MIUI6_5.8.6
My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
sunder rawat said:
My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
Click to expand...
Click to collapse
bro I too have the same problem, did you solve that? if so please help me.
sunder rawat said:
My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
Click to expand...
Click to collapse
same thing happened to me
any solution till now?
use SP Flash Tool to flash stock ROM.
I too had a similar problem, flashing Stock ROM via splash tool fixed my issue.
followed the Video on YouTube and did what exactly they said.
Rizan Mohammed said:
use SP Flash Tool to flash stock ROM.
I too had a similar problem, flashing Stock ROM via splash tool fixed my issue.
followed the Video on YouTube and did what exactly they said.
Click to expand...
Click to collapse
Do you have that youtube link...
See This
h ttp :// firmwarefile. com /karbonn - sparkle - v
Just Remove The spaces or search ''h ttp :// firmwarefile. com /karbonn - sparkle - v'' on google
Download The File And follow the
Instructions
sunder rawat said:
My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
Click to expand...
Click to collapse
Flash the stock firmware with SP flash tools make sure you have the proper drivers installed on your PC and select firmware upgrade in the tools not format or download ok
https://m.youtube.com/watch?v=W9Co-2QBRZU
watch this video for detailed explanation OK hope I helped you.
My unite 2 is not charging,not switching not responding .I tried to flash it with sp flash tool but it stop after da download with error 4001.In flash tool it is not showing chip info.
No panic needed!
Don't worry mate! I also have gone through the same situation a lot of times!
Search for stock Firmware of Unite 2(Google)
Flash it using the SP Flash tool (But Don't Download this time search for an option Firmware Upgrade and then click download!)
After that you will get back your device!
If you like this post please hit Like Button that would be a great help!
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
kng_santosh069 said:
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
Click to expand...
Click to collapse
press vol- and connect with usb cable. wait preloader to be installed, start SPflash tool -> load scatter file MT6582(search on internet or ask me) click on download. follow instructions...
Voila! you will have phone with stock firmware..