Hi, guys
My phone is bricked after i try install a rom from sp flash tools, my phone was without gsm signal after install cwm.
Now its bricked, i need a rom which i cant flash it with sp flash tools, because i cant enter to recovery and mobile upgrade doesnt find my phone.
Please help me.
Yhizsrhaell said:
Hi, guys
My phone is bricked after i try install a rom from sp flash tools, my phone was without gsm signal after install cwm.
Now its bricked, i need a rom which i cant flash it with sp flash tools, because i cant enter to recovery and mobile upgrade doesnt find my phone.
Please help me.
Click to expand...
Click to collapse
keep calm there is no working roms for this device and u will only go into recovery if u removed the sd card but if u flashed the official rom , the booting will take 30 min !! believe me
Use One Touch Upgrade,is a anti-breaker
Related
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
ibshar said:
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
Click to expand...
Click to collapse
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Then you need to flash the stock ROM with SP Flash tool
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Yes..u can flash through SP tool as said by @IBashar..in case..if u dont want to flash through SP tools..I will suggest u to use someone else SD card & paste ur rom in that & then flash through recovery..as I personally feel that flashing through SP Tool is quite cumbursome..
HIT THANKS IF I HELPED U
Sent from my JMP V13 using xda app-developers app
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Don't worry bro! Try to boot into CWM again because it should be there. Then try to flash the ROM again...
And remember, in future, always take a Nandroid backup before you install anything, mod or ROM. It really helps in case something goes wrong and phone stops working,
ibshar said:
Then you need to flash the stock ROM with SP Flash tool
Click to expand...
Click to collapse
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
None of the tools will work unless you install the correct Drivers.. So install teh drivers that are given in the SP Flash tool thread and then try.
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
I Also Face The Problem With SP Tools 0% Problem Take Out The USB Cable And Insert It Again And After 30-40 Seconds It Will Show The Process Completed 100% And Green Ring Will Be There
Sent from my Micromax A110 (Canvas 2) using xda premium
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
see the video below
non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro
hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
THREAD CLOSED..
NO MORE BUG REPORTS
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the your phone Doesn't. Please
* do some research Before doing this
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
BACKUP ALL DATA BEFORE DOING THIS
>IF YOUR DEVICE NOT >TURNING ON AFTER FLASH
>NOT LEAVING RECOVERY
>EVERY TIME RESTART to RECOVERY
>INVALID IMEI
>BOOTLOOP
THERE ONLY ONE FIX
FLASH STOCK FIRMWARE VIA ODIN
ROOT & CWM FOR GT S7582 USERS
Easy Method By Yasikst
Watch "ROOT&CWM WITHOUT PC OR ODIN FOR S DUOS 2(GT S7582)" on YouTube
https://youtu.be/Y9m-hiCC5lc
STEPS
1. DOWNLOAD THE Yasi'z Rooting&Cwm kit For GT S7582 Users.zip
2. EXTRACT TO SD CARD
You Will Get 4 Files..
1.KingUser.apk
2.Rashr Pro.apk
3.Recovery.img
4.About.xml
3. INSTALL THE APK'S
(if you're Rooted Already Using SuperSu etc.. Dont Install KingUser.apk Just Ignore Next Step)
4.Open KingUser And Tap Get Root.. ( If it fails 2 or 3 times Just Turn On mobile data Or Connect to Wifi & try Again.. It will Success Fully Root)
5. Oper Rashr Tool & Press Flash From Storage and Select The Recovey.img In the Rooting Kit
6 AFTER flash JUST Turn Off Your Device .. After Your Device Fully Turned Off
PRESS Vol Up + Home butten + Power butten ..
DONE
YOUR DEVICE WILL TURN ON IN TO CWM ( CLOCK WORKMODE RECOVERY )
DONE.... NO BUGS:fingers-crossed:
IF YOU GET Any Complaint Like Not Turn On From Recovery Or Not Going To Recovery Or Lost IMEI , Bootloop
I'M NOT RESPONSIBLE..
JUST FLASH STOCK FIRMWARE VIA ODIN
Please Download A stock Firmwar from
http://www.sammobile.com/firmwares/database/GT-S7582/
And Flash it Using Oding
Check this
How to flash firmwar via odin
http://androidcentral.us/2014/02/how...msung-devices/
Video
https://m.youtube.com/watch?v=j--RS0bx5c4
Press thX If I Helped You....:victory:
Link
MediaFire link: Yasi'z Rooting&Cwm kit For GT S7582 Users.zip
http://www.mediafire.com/download/p0lypycdav6pg5c/Yasi'z_Rooting&Cwm_kit_For_GT_S7582_Users.zip
Watch "ROOT&CWM WITHOUT PC OR ODIN FOR S DUOS 2(GT S7582)" on YouTube
https://youtu.be/Y9m-hiCC5lc
Thanks bro, it works for me
sohaan said:
Thanks bro, it works for me
Click to expand...
Click to collapse
You Are welcomE Bro:good:
Thank you , Perfectly working
PLease I need Help.. I did these steps but now my phone doesnt leave the cwm screen.. I tried install a custom ROM, a stockfirmware but it just power on showing the cwm screen.. Help me to fix it.,., tks
ovisionario said:
PLease I need Help.. I did these steps but now my phone doesnt leave the cwm screen.. I tried install a custom ROM, a stockfirmware but it just power on showing the cwm screen.. Help me to fix it.,., tks
Click to expand...
Click to collapse
Stock firmwar Cant flash Over CWM
It needs Odin
And Some custom roms like Aosp , Cm needs its on cwm
Please say About The stock rom that you are flashed ...I will try to help you
Name,how did you tried to flash, etc...
Sorry for late Replay
ovisionario said:
PLease I need Help.. I did these steps but now my phone doesnt leave the cwm screen.. I tried install a custom ROM, a stockfirmware but it just power on showing the cwm screen.. Help me to fix it.,., tks
Click to expand...
Click to collapse
Please Download A stock Firmwar from
http://www.sammobile.com/firmwares/database/GT-S7582/
And Flash it Using Oding
Check this
How to flash firmwar via odin
http://androidcentral.us/2014/02/how...msung-devices/
Video
https://m.youtube.com/watch?v=j--RS0bx5c4
I need help idid what you say but now my device dosen't go to recovery mode and I can't rest to factory mode and the sim card dosen'tworking imei:invald plZ help
can i use this for my s duos 2Korean versionn
Plz tell me can i use on my Korean copy
invalid imei
I tried your method it didn't worked for me however i lost my imei also how to fix this.
Can u give me your backup.img
It installed but after rebooting it says no command plz help me
souvikmahata said:
plz tell me can i use on my korean copy
Click to expand...
Click to collapse
i really do not know
but you can try it in your own
backup all data before doing this
tah3 said:
it installed but after rebooting it says no command plz help me
Click to expand...
Click to collapse
flash stock firmware
whapp said:
I need help idid what you say but now my device dosen't go to recovery mode and I can't rest to factory mode and the sim card dosen'tworking imei:invald plZ help
Click to expand...
Click to collapse
Flash Stock firmware
souvikmahata said:
i tried your method it didn't worked for me however i lost my imei also how to fix this.
Can u give me your backup.img
Click to expand...
Click to collapse
sorry
i dont have the backup.img
so please flash stock firmware via odin
i used these recovery.img without problems. i have seen the the above post which have problems. i think they didnt rooted there phone properly with busybox installed.
My phone. Not detected in pc kies or in odin plz help me with backup.img
Sir thanks it works.. but my problem is i cant formt my phone.. everytime i boot recovery CWM shows. When i tried it format there at reset factory settings .. and then reboot nothing happens.... my same application data everything is in there as if nothing happens.. please help
Dear sir plz provide me cwm/twrp recovery for my gt-s7582, bcz prvs rvry i was installed, then my se is everytime satrt and restart again, then i did flash stock rom
After installing CWM FILE. In s duos
My phone didn't start up
What should i do?
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....
Good day, i am a newbie to flashing custom roms. I wanted to flash twrp recovery on my inew v3plus phone.
I downloaded twrp recovery from needrom.com and flashed it with sp flashtool. After flashing my phone refuse to turn on, cant charge or boot to recovery.
Please what do i do to get this phone working again. Please i need help
Best Regards.