My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
sunder rawat said:
My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
Click to expand...
Click to collapse
bro I too have the same problem, did you solve that? if so please help me.
sunder rawat said:
My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
Click to expand...
Click to collapse
same thing happened to me
any solution till now?
use SP Flash Tool to flash stock ROM.
I too had a similar problem, flashing Stock ROM via splash tool fixed my issue.
followed the Video on YouTube and did what exactly they said.
Rizan Mohammed said:
use SP Flash Tool to flash stock ROM.
I too had a similar problem, flashing Stock ROM via splash tool fixed my issue.
followed the Video on YouTube and did what exactly they said.
Click to expand...
Click to collapse
Do you have that youtube link...
See This
h ttp :// firmwarefile. com /karbonn - sparkle - v
Just Remove The spaces or search ''h ttp :// firmwarefile. com /karbonn - sparkle - v'' on google
Download The File And follow the
Instructions
sunder rawat said:
My phone is on bootlooping its on and off showing logo of karboon. I have flash it by sp flash tool by option of format all+ download of its stock rom after it doesn't on its only detect by pc or flash tool it doesn't shows any light on screen so plz help me.
Click to expand...
Click to collapse
Flash the stock firmware with SP flash tools make sure you have the proper drivers installed on your PC and select firmware upgrade in the tools not format or download ok
https://m.youtube.com/watch?v=W9Co-2QBRZU
watch this video for detailed explanation OK hope I helped you.
Related
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
ibshar said:
Are you pressing the recovery buttons correctly? Take out battery then put it back. Then try pressing the Power button and Volume Up + Down together and see if it opens CWM..
Click to expand...
Click to collapse
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Then you need to flash the stock ROM with SP Flash tool
@abhi007 said:
Thanks for the reply..
Yes the CWM recovery came...but i do not have stock Rom in phone and my mem card slot is busted..
Should i try flashing using SP flash tools ???
Click to expand...
Click to collapse
Yes..u can flash through SP tool as said by @IBashar..in case..if u dont want to flash through SP tools..I will suggest u to use someone else SD card & paste ur rom in that & then flash through recovery..as I personally feel that flashing through SP Tool is quite cumbursome..
HIT THANKS IF I HELPED U
Sent from my JMP V13 using xda app-developers app
@abhi007 said:
Hi ,
I am new to the forum and recently started using custom roms..
I was installing the "rayne rom" using cwm and after formatting data and system..it stopped suddenly and gave a message "symlink failed"
Now the phone does not reboot to CWM recovery and only the previous Devs boot logo comes...PLEASE help...I think i may have bricked it.
Click to expand...
Click to collapse
Don't worry bro! Try to boot into CWM again because it should be there. Then try to flash the ROM again...
And remember, in future, always take a Nandroid backup before you install anything, mod or ROM. It really helps in case something goes wrong and phone stops working,
ibshar said:
Then you need to flash the stock ROM with SP Flash tool
Click to expand...
Click to collapse
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
None of the tools will work unless you install the correct Drivers.. So install teh drivers that are given in the SP Flash tool thread and then try.
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
I Also Face The Problem With SP Tools 0% Problem Take Out The USB Cable And Insert It Again And After 30-40 Seconds It Will Show The Process Completed 100% And Green Ring Will Be There
Sent from my Micromax A110 (Canvas 2) using xda premium
@abhi007 said:
Hey,
I tried flashing using SP tools but it is coming USB device not recognized.(i have installed the drivers in my pc)..... is there any other tool to recover my phone?
Since SP tools does not recognize the device.. it stays at 0%...
Any suggestion is welcome...pls..
Click to expand...
Click to collapse
see the video below
non of the driver is working, my phone keeps disappearing on device manager it is hard bricked. i installed one custom rom from xda and after rebooting system it is not at all responding either to charging and not to recovery opption also please help bro
Hello My Q-3000 is getting stuck in the boot loop(XOLO Logo ) . Even though I am used Vol+ & power not getting recovery menu ,but odin with red triangle.Please help to solve this problem. I requesting experts to guide me to resolve this issue.
Use Sp flash tool to install stock ROM & u should check ultimate thread
Use Sp flash tool to install stock ROM & u should check ultimate thread
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
vmc809 said:
Dear Mr.Sachin Fulzule, thanks for reply I did all that ,but problem is my Phone is not going into recovery mode by pressing VOl+ and Power butten suck in the boot loop XOLO logo is appearing. Please help me
VIKRAM CHINCHOLKAR
Click to expand...
Click to collapse
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
sachin.r.fulzele said:
If u have pc, then download sp flash tool, stock from for Xolo q3000, drivers for q3000, then install drivers properly & flash it phone using sp flash tool, no need to go to recovery.
Click to expand...
Click to collapse
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
No more suggestions, submit phone to Xolo care
Sent from my HM NOTE 1W_MIUI6_5.7.23
vmc809 said:
Dear Mr. Sachin Fulzule, namaskar I did already what you mentioned, but problem is not solved.Please give some other solution. Waiting for your help.
Click to expand...
Click to collapse
Have u followed the procedure mentioned in this post.
04 - Flashing stock ROM using SP flash tools
Unbricking guide.
If u did exactly same then the phone should boot normally.
Also check the battery charging, maybe its not sufficiently charged.
avi3230 said:
Have u followed the procedure mentioned in this post.
Click to expand...
Click to collapse
I've told him, the same earlier, but he replied that he had done it, still no success.
Sent from HM NOTE 1W_MIUI6_5.8.6
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
mujaid714 said:
Even i too faced the same problem..but managed to flash by sp tools..make sure ur ports are working and drivers are properly installed..and downloaded file is not corrupted..
Click to expand...
Click to collapse
It's because u should either install vcom drivers or cynus drivers for xolo q3000, availability of both causing the trouble.
Sent from HM NOTE 1W_MIUI6_5.8.6
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....
My unite 2 is not charging,not switching not responding .I tried to flash it with sp flash tool but it stop after da download with error 4001.In flash tool it is not showing chip info.
No panic needed!
Don't worry mate! I also have gone through the same situation a lot of times!
Search for stock Firmware of Unite 2(Google)
Flash it using the SP Flash tool (But Don't Download this time search for an option Firmware Upgrade and then click download!)
After that you will get back your device!
If you like this post please hit Like Button that would be a great help!
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
kng_santosh069 said:
Hey my phone is also bricked... Please tell me in details... can't do anything with sp flash tool. It also not detects my phone.
Click to expand...
Click to collapse
press vol- and connect with usb cable. wait preloader to be installed, start SPflash tool -> load scatter file MT6582(search on internet or ask me) click on download. follow instructions...
Voila! you will have phone with stock firmware..
Yeah you read it correct?. Its a TWRP for this outdated device. I've ported a TWRP? recovery for this phone when I saw so many people requested one in XDA threads.this recovery is able to flash any android version. In order to flash it just unzip the twrp.zip & download flashify on a rooted micromax a108 and select flash then select this recovery and reboot.
OR
Use sp flash tool to flash only the recovery
Flashify: https://play.google.com/store/apps/details?id=com.cgollner.flashify
my canvas l a108 is not booting i had not used it for 6 months then today i turned it on it is not booting just showing the android logo
rishavsoni said:
my canvas l a108 is not booting i had not used it for 6 months then today i turned it on it is not booting just showing the android logo
Click to expand...
Click to collapse
Your device is bricked bro.
rishavsoni said:
my canvas l a108 is not booting i had not used it for 6 months then today i turned it on it is not booting just showing the android logo
Click to expand...
Click to collapse
Flash this recovery using sp flash tool...
Then flash some custom ROM on it..
Or if you want to stay on the stock ROM then download the stock ROM from https://firmwarefile.com/micromax-a108 and flash it using sp flash tool
prateek0005 said:
Flash this recovery using sp flash tool...
Then flash some custom ROM on it..
Or if you want to stay on the stock ROM then download the stock ROM from https://firmwarefile.com/micromax-a108 and flash it using sp flash tool
Click to expand...
Click to collapse
link for sp flash tool
rishavsoni said:
link for sp flash tool
Click to expand...
Click to collapse
Visit this site and download sp flash tool and the mediatech vcom drivers https://spflashtool.com/
phone is booting but it is not connecting to pc
rishavsoni said:
phone is booting but it is not connecting to pc
Click to expand...
Click to collapse
Have you tried these methods https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Check this website and reply.
prateek0005 said:
Have you tried these methods https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Check this website and reply.
Click to expand...
Click to collapse
tried no luck
rishavsoni said:
tried no luck
Click to expand...
Click to collapse
Can you access the recovery and if yes then have you tried clearing data