Related
Can someone tell me is the Vu-mate Wireless Charging Receiver Card(www .tylt.com/vu-mate/) compatible with the Note 4?
I'm thinking of buying it together with the TYLT VÜ Wireless Charger
No, it doesn't appear to be compatible. The card needs to be made to fit the phone, and each phone is configured differently- looks like Vu only has them for the S4, S5, and Note 3 at this point. However, there are several Qi receiver cards already on the market for the Note 4, you can get them on Amazon or Ebay pretty easily. From what I've seen this looks like the best option:
http://www.amazon.com/YooTech®-Stan...qid=1415965544&sr=8-1&keywords=yootech+note+4
This one doesn't interfere with NFC (a lot of them stop NFC from working), and it's the only one I've seen that will still allow the S-View function if you want an S-View cover. It's only 0.6mm thick which is about as thin as they get too, and I believe other people here on the forums have already got it and confirmed that it works well.
Of course, you can also always just go with the Samsung branded wireless charging backs, either the standard cover or the S-View one- they're both available in the Samsung store or from other internet sources. The S-View Qi cover is $69.99 and the normal Qi back is $34.99, but if you register your phone with Samsung you get a coupon for 50% off any accessories under $50 from the Samsung store so the normal Qi back ends up only being $17.49, which is a pretty awesome deal. It is a bit thicker than the non-Qi back though, so if you want to use a case you'll probably be better off with the Yootech card.
In any case, all of these options should work just fine with the Tylt Vu, or with pretty much any other Qi charger as well for that matter.
Hi Bojan,
Thank you for contacting TYLT customer support. The VU Mate for the Note 4, we will have it in the middle of December. Please let me know if you have further questions.
Thanks,
--
I would like to know if the official Samsung Wireless Qi Car charger will be able to hold my Note 4 with the Wireless charging S-View cover.
Could anyone confirm please?
andreasy said:
I would like to know if the official Samsung Wireless Qi Car charger will be able to hold my Note 4 with the Wireless charging S-View cover.
Could anyone confirm please?
Click to expand...
Click to collapse
it says its a fully adjustable cradle. so unless im not quite understanding the concern, I would say this will fit just fine
mikexmayhem said:
it says its a fully adjustable cradle. so unless im not quite understanding the concern, I would say this will fit just fine
Click to expand...
Click to collapse
I was told by an online shop that it won't fit and that's why I want to confirm from someone who has it.
Compatible with All Qi-Certified Smartphones
The Samsung Universal Wireless Charging Vehicle Dock is compatible with all Qi-certified devices ranging in size from 4" to 5.7", including Galaxy S 4, Galaxy S 5, Galaxy Note 3, and Galaxy Note 4. All models require a Samsung Wireless Charging Battery Cover or Wireless Charging S-View Cover (sold separately). With the Wireless Charging S-View Cover installed, you can fold back the folio cover to give you full access to the screen for navigation and more – the phone will still charge wirelessly, even with the folio tucked back behind the phone.
Just like @denson said it should work.
Ask the seller's customers service. Their answer is most accurate.
http://www.samsung.com/us/mobile/cel...EP-CN910IBUSTA
Does anyone who know or own the Samsung Note 4 with the Wireless Charging Back Cover (see link above) know which cases (especially wallet/folio style cases) fill fit with the phone and this wireless back cover as I understand it fits abit thicker then the stock cover?
Thanks
artofwar said:
http://www.samsung.com/us/mobile/cel...EP-CN910IBUSTA
Does anyone who know or own the Samsung Note 4 with the Wireless Charging Back Cover (see link above) know which cases (especially wallet/folio style cases) fill fit with the phone and this wireless back cover as I understand it fits abit thicker then the stock cover?
Thanks
Click to expand...
Click to collapse
I was faced with the problem as you. I ordered the official Samsung wireless charging back, but it would not fit in my Seidio case. I returned the Samsung back and ordered a bare charging coil that will fit under the standard back. No problem with charging or any other functions and it fits in my Seidio case.
Mike
WHich charging coil do you recommend? WOuld it charge at the same rate as the Samsung version? Will I also loose NFC functionality if I did it this way?
mmarquis said:
I was faced with the problem as you. I ordered the official Samsung wireless charging back, but it would not fit in my Seidio case. I returned the Samsung back and ordered a bare charging coil that will fit under the standard back. No problem with charging or any other functions and it fits in my Seidio case.
Mike
Click to expand...
Click to collapse
S View case look nice and work normaly with wireless charging
artofwar said:
WHich charging coil do you recommend? WOuld it charge at the same rate as the Samsung version? Will I also loose NFC functionality if I did it this way?
Click to expand...
Click to collapse
This is the one that I'm using:
http://www.amazon.com/gp/product/B00R3WK2LU?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Not sure about the charging rate compared to Samsung. It is Qi standard so I would guess there is little difference. It claims 600mA. It is NOT a quick charge, more like an overnight charge. I have not tested the NFC part but the answered questions say that it is OK.
I have the same problem with my spigen case, now I got a hold of the s charger back. I'm really torn now, as I love the little stand the spigen comes with, but the official samsung back on the s charger pad wide seems to charge in double quick time.
I see the suggested workarounds and might consider them, but still nobody knows of an actual case which fits the note 4 with the wireless back?
Tromador said:
I have the same problem with my spigen case, now I got a hold of the s charger back. I'm really torn now, as I love the little stand the spigen comes with, but the official samsung back on the s charger pad wide seems to charge in double quick time.
I see the suggested workarounds and might consider them, but still nobody knows of an actual case which fits the note 4 with the wireless back?
Click to expand...
Click to collapse
There is a huge thread in this subforum with a dozen of pages referencing cases that fit the charging back (yes they exist) and various workarounds. Here: http://forum.xda-developers.com/not...se-note-4-samsung-qi-charging-t2958395/page13
I just moved the coil from the Samsung charging back into the regular back, and it's no thicker than it was without the coil, and so any case could continue to fit - whether it will charge through the case is another matter.
any with a 2-3w charge output? 600a would take forever.
StevePritchard said:
I just moved the coil from the Samsung charging back into the regular back, and it's no thicker than it was without the coil, and so any case could continue to fit - whether it will charge through the case is another matter.
Click to expand...
Click to collapse
Moving the coil to the stock back is really the only way to go. It charges fine and the NFC works.
I went for month trying cases that fit that bulge and even the ones that "fit" threatened to pop off at any moment.
Here is a guide to moving the coil:
(HOW-TO) Move receiver coil from OEM Wireless back to stock cover. (LOTS OF PICS)
-Paul
There don't seem to be any OEM Qi backs left., which is what I wanted. I got an aftermarket one, which is as thin as the stock non-wireless back, but that 1) doesn't fit all that well; there's always a gap at one corner or other, depending on which end I start with when putting it on, and 2) is at least moderately durable.
The one I have is starting to split, 3 months in. It charges fine (800mA at 5VDC, which is better than my Note 3 with OEM charging back)
So... if you are using a wireless charging back, which one are you using, and how do you like it?
BTW, I've been using a number of these wireless charging docks ($10 on amazon) and they're great if you want a spot you can just plonk your phone down and have it charging.
Hello, I'm using this on my phone and it fits and works perfectly.
https://www.amazon.com/gp/product/B01DB899XQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Here is the back I purchased.
https://www.amazon.com/gp/product/B01DB89ACG/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
I use it with this charger. I read a lot of reviews that the wireless charging is very slow and someone even said it was more like a toy... For me, the wireless charger easily charges my phone as fast as a 1 amp charger. You do have to have a minimum of a 1 amp wall adapter.
https://www.amazon.com/Wireless-Cha...90870&sr=1-11&keywords=wireless++fast+charger
EDIT: I forgot to mention, I use a rubberized case with my phone, so it is rather thick and have no issues using the charger with it.
I think the charger and back that bishop mentioned are fine. I used similar, but I actually stripped the charging circuit out of the back, removed the black plastic cover and put it into a standard (genuine) Samsung back, which I know fits perfectly. In fact, I bought 2 of these backs and stripped out the charging circuit in both. I put one in a standard back and another in a Samsung S-View cover because the Charging S-View cover from Samsung is no longer available. Now I have the choice of either S-View charging or standard back. charging for when I use the VR headset. BTW, looking at the circuit for the backs I used, it looks like NFC is in there as well.
I bought two different Qi receivers (and used the original back), and I regret it. The first one died after a month or two, and the second one heated up the phone while charging and ruined the battery.
So I broke down and bought Samsung's wireless charging back, and it has been working perfectly.
where i can find original oem samsung back QI ?
dhplap said:
Hello, I'm using this on my phone and it fits and works perfectly.
https://www.amazon.com/gp/product/B01DB899XQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I also use this back, (sold under the h-ber brand name on amazon) and it works fine. Of course the back does fit a little tight, and sometimes, you have to put it on the bottom (near USB port) first, or the clips don't clip.
I have phone in a incipio case which is two layer TPU and polycarbonate and pretty thick, but it charges fine.
https://www.amazon.com/Samsung-Inci...rd_wg=FFUej&psc=1&refRID=S732EGM8V4C7ZNFQBR6C
I have used a samsung fast charging qi dock, and a pleson fast charging dock, which both work fine, but will only charge at normal qi speeds due to lack of qi fast charge support on the note 4.
I get the original one for $60 in my country
d4rkkn16ht said:
I get the original one for $60 in my country
Click to expand...
Click to collapse
BO in my country ...
i'm not able to find it on internet to. It's just fake or aftermarket
dave457 said:
I think the charger and back that bishop mentioned are fine. I used similar, but I actually stripped the charging circuit out of the back, removed the black plastic cover and put it into a standard (genuine) Samsung back, which I know fits perfectly. In fact, I bought 2 of these backs and stripped out the charging circuit in both. I put one in a standard back and another in a Samsung S-View cover because the Charging S-View cover from Samsung is no longer available. Now I have the choice of either S-View charging or standard back. charging for when I use the VR headset. BTW, looking at the circuit for the backs I used, it looks like NFC is in there as well.
Click to expand...
Click to collapse
What are you doing to hold those stripped pieces in place? Is it just packed so tight that you don't need anything or did you attach it somehow?
bagery77 said:
What are you doing to hold those stripped pieces in place? Is it just packed so tight that you don't need anything or did you attach it somehow?
Click to expand...
Click to collapse
I just put the circuit panel onto the phone in the right position and then glue on the cover and then fitted the cover without moving the circuit panel. Press down well and the charging receiver is now glued to the case and in the correct position.
dave457 said:
I just put the circuit panel onto the phone in the right position and then glue on the cover and then fitted the cover without moving the circuit panel. Press down well and the charging receiver is now glued to the case and in the correct position.
Click to expand...
Click to collapse
Thx a bunch for your prompt response. Sorry, what kinda glue is this? I know it gets hot back there and I've never been this best at choosing proper adhesive materials. I'm specifically using this setup for a contraption I found for the gear. I purchased a built in back but don't trust it's quality. Here is the gear contraption. It will be my 4th fan setup but this time, wifi charging is a possibility:
http://m.ebay.com/itm/Samsung-Gear-...885580?varId=422849940618&txnId=1757397302002
bagery77 said:
Thx a bunch for your prompt response. Sorry, what kinda glue is this? I know it gets hot back there and I've never been this best at choosing proper adhesive materials. I'm specifically using this setup for a contraption I found for the gear. I purchased a built in back but don't trust it's quality. Here is the gear contraption. It will be my 4th fan setup but this time, wifi charging is a possibility:
http://m.ebay.com/itm/Samsung-Gear-...885580?varId=422849940618&txnId=1757397302002
Click to expand...
Click to collapse
I just used all purpose glue.
http://www.ebay.co.uk/itm/Bostik-Al...hash=item257277c46d:m:mFfuep7JS04lusjdXPKR7fA
Samsung wireless charging cover on Amazon.
https://www.amazon.com/Samsung-Wireless-Charging-Cover-Galaxy/dp/B00OP5SAAI
bagery77 said:
Thx a bunch for your prompt response. Sorry, what kinda glue is this? I know it gets hot back there and I've never been this best at choosing proper adhesive materials. I'm specifically using this setup for a contraption I found for the gear. I purchased a built in back but don't trust it's quality. Here is the gear contraption. It will be my 4th fan setup but this time, wifi charging is a possibility:
http://m.ebay.com/itm/Samsung-Gear-...885580?varId=422849940618&txnId=1757397302002
Click to expand...
Click to collapse
I used double sided tape when I did mine - not quite as permanent as glue, just in case it moved before the glue set.
Got this charger for £12.99 on Amazon:
mod edit - link removed
Feels cheap and looks cheap but it works and does the job well enough. It's foldable too, so you can use it either horizontal or vertical.
Worth it, if you need to buy a cheap one to leave at the office.
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
speed8081 said:
Would be great if wireless charger can work even with a metal piece on the back of casing for magnetic car phone holder
Click to expand...
Click to collapse
There are magnetic holders that claim to work without blocking the wireless charger. They use a metal piece shaped like an upside down "U" instead of a square one. Given all the warnings against mixing credit cards and metal on cases and what not with wireless charging, I'd be weary of trying it out myself on my own phone, but they do exist. Just search for wireless charging compatible magnetic mount, I'm sure some will turn out.
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
bramgg said:
Could be that I'm missing something (perhaps even a crucial factor), but why couldn't you use a wireless charger at the same time you have a metal plate in your case? It can't be harmful to the phone right?
I have a strong enough carkit so I can use a relatively small circular piece of metal in my slim fit case for the Note 9, works a charm. I've tested the location in the case, so I can use this in my car and still be able to put it down on a wireless charger so it charges without a problem. Okay, so when I put my phone on the charger pad a bit to far down or up, it doesn't charge, but that's just a matter of trying which position is best and this will become a non-issue the more you use it (since you know exactly how to put it on the charging pad).
Please enlighten me whether or not it could be harmful in any way to the phone because I don't want to risk a $1250 phone for the convenience of charging wirelessly. But I haven't ran into trouble this way just yet. Been doing this also with my Galaxy S8 for over a year btw, it still works like new.
Btw, @OP, can you share a link to the charger?
Click to expand...
Click to collapse
I put a link to charger on the video description.
I just bought this one: https://www.amazon.com/dp/B07C5KCQQ4/
Fast charges a little slower than directly plugging the Samsung charger into the phone (as expected).
The hinge is a tight friction fit, so the angle is adjusted wherever you like.