Related
Apologies if this has already been asked/answered, but have spent the last two days looking for a solution..
When connected via USB I cannot establish an internet connection, unless I delete the T-Mobile proxy setting.
I've applied the regedit edit that's been mentioned as a solution, but this didn't work.
Is there anyway to use the pass through connection without having to delete the proxy everytime?
The main annoyance is that the phone won't sync with my exchange server whilst connected to the PC. I have mail set up to sync with exchange server and all other items syncing with my PC. My Hermes sync'ed with anything and everything.
Thanks
just leave the proxy out.
T-Mobile's proxy is a pain in the arse and causes all sorts of problems.
I deleted the proxy from my connection on t-mobile nearly three years ago and on every single device i have had since. never had a problem since.
If the proxy is there, it affects ALL internet connections, so when you plug it in to your PC, it is trying to go through a Proxy that you can only access over GPRS.
that's why proxies are a PITA and should be deleted permanently.
and no, it should not affect anyhting if you delete it. or not that i have noticed anyway.
Thanks will give it a go when I get home.
Seem to be able to access internet without the proxy, but forgot my usb cable so can't test pass though at work.. fingers crossed!
When I deleted the proxy I couldn't then send SMS texts...?
That's a completely random coincidence. The proxy has nothing to do with SMS whatsoever.
you can of course make sure that you are using GSM for SMS. start>settings>connections>advanced network>SMS
set it to GSM. if this is already set, then it has nothing to do with the proxy.
Says "Your text message cannot be sent" after I removed the proxy. SMS is set to GSM. Could it have altered any other relevant settings? Have put the proxy back now but it still refuses to send the message.
Any ideas?
no, wouldn't have changed anything else. The proxy has no bearing on SMS whatsoever.
Like i said, i reckon it is just a coincidence, otherwise turning the proxy back on would have fixed it.
If it is set to GSM already try the other three settings as well.
and a soft reset of course....
Have found a cable and tested - still no joy after deleting proxy.
Connecting to PC, and items syncing with host PC are fine. Mail syncing with Exchange server fails and can't access internet via pass through.
Browsing and syncing with the exchange server is fine when not connected to the PC.
Btw kempas - SMS works fine after deleting the proxy setting, as it should do.
Steve
on the handset:
start>settings>connections>wifi (NOT Wireless LAN)> network adapters
set the drop down box to Internet.
On the PC:
Open Activesync>File>Connection Settings
Set "This computer connects to" to the internet.
Dunno what it is in vista, i have avoided it like the plague....
I did a soft reset and tried again (a couple of time) with no luck, unable to send text message.
Went to settings, connections and run through the network provider setup wizard, let it reset the phone and tried again. Settings 'seemed' all the same but SMS now sent without issue.
Will try removing the proxy again later and testing with another SMS.
EDIT: removed the proxy and sent an SMS without issue this time... So was a "completely random coincidence" as rhedgehog said.
Still can't access You Tube via it's mobile client though, at least, it still says no videos...
All now appears to do what I expect after removing proxy and following rhedgehog's advice. Pass through now works Many thanks!
Also appeared that the t-mobile proxy blocks Windows live and messenger
stevecg said:
All now appears to do what I expect after removing proxy and following rhedgehog's advice. Pass through now works Many thanks!
Also appeared that the t-mobile proxy blocks Windows live and messenger
Click to expand...
Click to collapse
Are you on wnw+??
mrvanx said:
Are you on wnw+??
Click to expand...
Click to collapse
Just Web N Walk I believe, not plus, so I guess messenger is a no no. Will bypassing their proxy end up with me being charged for data??
stevecg said:
Just Web N Walk I believe, not plus. Will bypassing their proxy to use messenger end up with me being charged for data??
Click to expand...
Click to collapse
No, but it is against the t&cs to use IM software when on basic web n walk. Tmobile block the ports for IM software anyways, it seems for new customers since several old customers managed to get through.....i never could though, so the proxy would make no difference if it is on or off.
I personally am on wnw+ which is TOTALLY worth it for using the HSPA when out with my laptop on location.
Cheers for that. Won't really need messenger to be honest - but the proxy setting interfering with the pass through was annoying.
kempas said:
Still can't access You Tube via it's mobile client though, at least, it still says no videos...
Click to expand...
Click to collapse
Log into My T-Mobile or call customer services and get the adult content filter turned off.
I think they blocked it to prevent kids blowing mummy and daddy's credit on watching videos.
Of course, Streaming is also against the T&C's of wnw standard, so it could be that this is why. I'm on wnw+ and had to turn off the filter to get it working.
Yep, that was it. Cheers for the reply...
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Email via Operator..
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
Do you need to download this?
http://www.microsoft.com/downloads/details...amp;tm#filelist
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
have u correct settings? try use built in setting configurator then restart.
i have the same issue. but i think it is normal becuase i dont think you can download email from edge, only 3g.
tengtou said:
i have the same issue. but i think it is normal becuase i dont think you can download email from edge, only 3g.
Click to expand...
Click to collapse
Thats not true because I have a at&t fuze and download email on edge all the time.
server?
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
FUZEinMYpants,
Are you using a large outfit like gmail or something like your company email? If the latter, does it only work on wifi when you are on your company's wifi network or Starbucks' wifis as well?
The reason I'm asking is that depending on the email servers (there are two, one for sending, the other for receiving mostly) you may only be able to interact with them if your coming from an IP address that falls within the range of whatever the administrator set. I for example could not send email when I went down to Florida because AT&T gave me a too different IP address than what I get in New York so I had to ssh into my email server and modify the range.
Your admin may only allow email to be relayed out and/or read if you're on the LAN which in this case, in your office or college on their wifi network connected to the local area network to which the mail servers are connected.
If that's not it then we may have a connectivity problem with your settings. Maybe a bad proxy configuration, your email server doesn't like wap.cingular which is behind a nat, maybe your email server requires a type of encryption you're either not specifying or is not supported by Pocket Outlook, maybe they're using imap and not pop and you're mixing that up, maybe they don't have encryption but they used funky ports for the vanilla protocols -- I'm going to stop typing until you tell me what the story is with your email setup.
In the meantime, to hold yourself over with the phone and without wifi, consider getting your mail through a webmail thing your server may run (I run roundcube) using Opera or PIE, depending on the webmail interface.
Doug
d0ugie said:
FUZEinMYpants,
Are you using a large outfit like gmail or something like your company email? If the latter, does it only work on wifi when you are on your company's wifi network or Starbucks' wifis as well?
The reason I'm asking is that depending on the email servers (there are two, one for sending, the other for receiving mostly) you may only be able to interact with them if your coming from an IP address that falls within the range of whatever the administrator set. I for example could not send email when I went down to Florida because AT&T gave me a too different IP address than what I get in New York so I had to ssh into my email server and modify the range.
Your admin may only allow email to be relayed out and/or read if you're on the LAN which in this case, in your office or college on their wifi network connected to the local area network to which the mail servers are connected.
If that's not it then we may have a connectivity problem with your settings. Maybe a bad proxy configuration, your email server doesn't like wap.cingular which is behind a nat, maybe your email server requires a type of encryption you're either not specifying or is not supported by Pocket Outlook, maybe they're using imap and not pop and you're mixing that up, maybe they don't have encryption but they used funky ports for the vanilla protocols -- I'm going to stop typing until you tell me what the story is with your email setup.
In the meantime, to hold yourself over with the phone and without wifi, consider getting your mail through a webmail thing your server may run (I run roundcube) using Opera or PIE, depending on the webmail interface.
Doug
Click to expand...
Click to collapse
Its yahoo mail. My company email which is an outlook exchange server works fine on wifi or edge.
FUZEinMYpants said:
For some reason my email doesnt work with edge, only wifi. when i try to send/recieve my email without wifi it says "cannot connect with current connection settings. I tried searching and found nothing. Anyone have any ideas. Oh I have a fuze by the way
Click to expand...
Click to collapse
Check the setting in your email settings under advanced server settings and make sure that it says Netowrk conncetion media net or att isp. I have seen it default to Work and that locks it into Wifi. I send and recieve email everyday on EDGE since I do not have 3g within 40 miles of here.
Dane Austin said:
Check the setting in your email settings under advanced server settings and make sure that it says Netowrk conncetion media net or att isp. I have seen it default to Work and that locks it into Wifi. I send and recieve email everyday on EDGE since I do not have 3g within 40 miles of here.
Click to expand...
Click to collapse
I checked this its set to media net
hello
i've installed the whatsapp on my sensation
but in the setup stage where it asks me to insert my phone number
after i do that it tries to connect and fails
error : unable to connect. please try again later
this app worked on my previous android phone
can anyone help ?
Haven't ran into this issue with my reinstall . It did not however send my phone the text I hit send and it acted like it was sending but went past it saying it was verified and let me in the program.
Sent from my HTC Sensation 4G using XDA App
anyone else ?
No problems with whatsapp whatsoever. Been using it a LOT.
Only problem with Whatsapp for me is that most contact photos do not show, despite being 'linked'. May try to reinstall if I get annoyed enough.
No issues here. I rely on it heavily. Runs just as flawlessly as it did on my iPhone.
I would suggest just trying it from a different location... Sometimes getting in range of a new tower fixes little data issues like that for me. Or try it on Wifi. Or if you were on Wifi, try it on data network... I think you get the idea
Only issue I have with Whatsapp is sometimes it like refuses to refresh whether the contact is online or not and shows them as "Last seen......" and won't push texts through when I know for a fact the person is online. Annoying, as I will send a text expecting it to go through only to look at my phone half an hour later wondering why the person hasn't texted back only to discover a single check by my message
kazprotos said:
Only problem with Whatsapp for me is that most contact photos do not show, despite being 'linked'. May try to reinstall if I get annoyed enough.
Click to expand...
Click to collapse
try syncing facebook for htc sense instead of just facebook.
that sorted my problem and now I have all pics from the contacts showing
Not being able to use WhatsApp is no fun, so if you are having trouble connecting, keep reading. To start, there are many reasons why you may not be able to connect to WhatsApp, so we have listed a few of the most common reasons.
The most common reason why you cannot connect to WhatsApp is because your phone is not connected to the internet.
To ensure you have a working internet connection, check the following:
You have a data plan on your carrier's network or a Wi-Fi connection with internet access.
Make sure the signal strength for Wi-Fi or data network is good and that the phone is connected to the network.
Open a webpage in your phone browser to see if it loads. If it loads, your phone is connected to the internet!
Reboot your phone.
If you cannot connect to the internet through your Wi-Fi network, try connecting to a different Wi-Fi network or connecting over your phone's data network.
If you can open webpages and run other applications that connect to the internet on your phone, but WhatsApp will still not connect, try deleting and reinstalling WhatsApp. Learn how to reinstall WhatsApp on: Android | BlackBerry | iPhone | Nokia
If you can connect to other applications on your data network, but not WhatsApp, it could be that your mobile provider has configured your wireless access points to block certain chat applications.
Try this if WhatsApp still will not work on data only:
Contact your mobile provider and ask them about different access point settings to run chat apps.
They will guide you through a process in which you will manually configure your data network and web settings.
-------------------------------
Thats what I did and it worked, also try the last step of changing your access point !
Finally!!!!
Check your access point ie APN
I was facing same issues when I checked access point it was different from what I normally use. I changed it and it works fine now
Access point changing help !!!
Service provider : Vodafone.
Hoping someone can help. I have a Nexus 5 on the AT&T network. Been using it without issue since Halloween 2014. All of a sudden, the past couple of days, I'm having some issues with MMS messages. I started a new group message and only one person received it. I haven't been able to text pictures to people. And today I have been receiving notification stating "Can't download MMS - check your APN settings". I can send regular one on one text messages just fine and sometimes group messages do go through. Sometimes not. Pictures don't seem to be going through at all.
Nothing has changed on my phone and I definitely haven't touched the APN settings. I'm using the "phone" APN for AT&T with all of the correct settings founds online.
I had a friend who's using a 2014 Moto X Pure Edition send me his APN (also AT&T) and he has one called "nxtgenphone" but all of the other settings are identical to the "phone" APN. I've tried added a new APN for "nxtgenphone" but when I select it and then reboot, the phone goes back to the "phone" APN automatically.
Anyone know what could be going on? Is it an AT&T issue? My issue? Other? I'm not sure what to do or check at this point.
Again, everything has worked just fine for months. This is a recent issue the past couple of days.
Thanks!
Bronson
I had a similar issue with Net10. What fixed it for me was moving my active APN to be the first APN.
I just noticed I have the same problem. I am on AT&T with my N5 running 5.1(D) also, my APN it set to ATT Phone, and all settings are confirmed. googled the problem and the "google messenger" app seems to be buggy. It has been updated recently and I think its now more messed up than before...
If on LTE and WIFI I have mms problems
If on LTE, 3g or H only mms goes through!!!
If I use "hangouts" (which I hate becuase if you search for a contact, it puts your google+ contacts up 1st) things seem to work fine in all forms of connection LTE/WIFI/3G/H etc....
So till they fix the "Google Messenger" App, I am forced to use "Hangouts" as it is more reliable for now
I'm on AT&T & the last time I tried the "Google Messenger" App a couple of weeks ago, I had trouble with MMS. I run CM and just went back to the CM messanger, and it was fine. So it seems there is an issue with AT&T & the Google Messenger app that didn't exist before. I wonder if it is specific to the N5 or on other phones.
Well here's another funky thing to add... As stated above I have problems with sending and receiving mms with Google's messenger application at "home" but not with Google's hangout application at "home" where I first noticed the problem. Well while I was at "work" today about 15 miles away from home. I tried Google's messenger application and it worked!!!
So I am now thinking it has something to do with AT&T tower at my home location and Google's messenger application. Since Google's hangout works when I am "home" and away...
Now what???
Sent from my Nexus 5 using XDA Premium HD app
Another update to my dilemma, when at "home" and I turn my "WIFI" off and restart the phone. Things seem to work, as I look more and more into this problem I am having with sending and receiving mms on AT&T. I am starting to see a pattern that Google's Messenger application may have an issue where it is suppose to "Turn Off" Wifi use cellular data to send and receive the mms and then "Turn On" wifi after it is done with the mms process.... But this does not explain why things work while I am not away from my "Home" location!!!!
Getting to the root of my problem!!!! FIXED!!!!!!
I am starting to think that the MMS problem is not with AT&T and the google messenger app, or 5.1(D), or my APN setting!!!!
But with my wifi router at home!!!
After more reading up on this and also the fact that I have "No" problems sending or receiving MMS while "Away" from home using another WIFI source or with WIFI off. I was starting to think if the problem was "Caused" by my wifi router a linksys wrt54g running dd-wrt??? So what I did was to connect to a Public Wifi I have outside of my house and I was able to send and receive MMS without any problems!!!!
Just recently I had to change a setting on my router to allow my xbox360 to download some content.
That setting was to "Allow - UPnP service" I went back into the router, reversed my settings and rebooted the router, made sure my phone was connected to the "home" wifi and checked my IP address to see if it was connected to my ISP. Attemped to send a MMS and GUESS WHAT!!!! IT WENT TROUGH!!!!! for a short period of time then it stoped again... I went back into the routers setup page and also turned off the STATIC IP I set for the phone, no luck. Then I remembered I have OpenDNS and my router was using the OPENDNS DNS addresses. went to my opendns dashboard and looked at what was blocked by them and found that that MMS proxy site "proxy.mobile.att.net" was "Blocked" by openDNS. So I put that domain in the "Never Block" list and rebooted the router. So far I am able to send and recieve MMS again when I am on my Home network... This still does not explain again why "hangouts" works with all of setting I have chenged before coming to this conclusion. Unless Google Hangouts is not using the APN and uses some other form of traffic to the net???? Also Google's Messenger app is also using DATA via whatever WIFI connection. Thus is my OPENDNS was blocking the proxy it was not going through!!!!
I AM FIXED for now!!!!! :good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
So all of you who have problems with Google's Messenger APP sending and/or receiving MMS. Yes check to make sure your APN settings are correct. If your are on WIFI, disconnect WIFI attempt to send and receive a MMS. If it goes through when your WIFI Connection is off, but cannot if your connected to WIFI. Then go into your routers setup page and see if UPnP is "ON" or "OFF". When I turned my "UPnP to OFF" and make sure your phone is not assigned a static
IP.... If your using a OpenDNS filter/Blocker check to see if its not blocking the MMS Proxy!!! Lets hope this is it!!!!
Holy crap, thank you for this!! I've had this issue pop up over the last few days and couldn't for the life of me figure out what was wrong. It seems that un-blocking the proxy did the trick for me, too. I took it one step further, though, and whitelisted the whole att.net domain.
Oddly enough, I noticed that with the domain un-blocked, I could not resolve proxy.mobile.att.net on my desktop. So our phones must know to hand-off to the wireless network if that happens. But with the site "blocked," it WAS being resolved, which is probably what confused the heck out things.
Anyway .. thanks again. Yes, I hit the button.
I was able to sign my wifi network (wpa2-psk) but after login it will give me error.
Unable to connect to wifi network. Sign in procedure not supported.
Anyone know a way to fix it?
Just for testing, switch yout WLAN to WEP.
Gruß Kai
WPA-PSK works for me with my Cisco access point for what it's worth.
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
WEP doesn't work, my home router and office all got the same problem. But if i open AP hotspot from my phone it works...
Is your Network visible? Try what happens if it is visible. Another Test, try your WLAN open without Encryption.
Gesendet von meinem SM-G925F mit Tapatalk
Yes visible, tried open also won't work. Its weird only work if i AP from my phone. Other wifi network will let me pass thru authentication and i see the obtaining ip message and connected but after few sec it will give me the "Unable to connect to wifi network. Sign in procedure not supported".
Wifi Connection
Having the exact same problem. Anyone able to troubleshoot this matter
After the last update Gear S2 WiFi connection support passwords long not over 12 characters.
Before update I was connected to my WEP (13 HEX couples of characters, that is 26 characters). After update I cannot succeed in connecting any more.
I asked to Sumsung support and they suggest me to shorten the password...
Now I have shifted to WPA encryption with password long 8 characters and now the Gear S2 connects with no issues.
GS
ITALY
I too am having wifi connection problems. I have the Gear S2 AT&T model SM-R730A
I was getting the message sign-in procedure not supported and what I found was, since this device has no browser to input the login- username and password, you get that message.
Really Samsung? You stick a wifi radio in this thing but can't connect to most wifi's out there.
Went into my Samsung account and synced my wifi logins from my phone to gear S2 and now they are saved on the gear S2 and it logs in without the message (not supported).
Only problem is, it says it's connected to the wifi, but nothing works on that network from the gear. Still not logged in to the wifi network I believe. But then why does it say connected.
It works great on a wifi network that only requires a password, but as you know most hotels and other hot spots require username and password in a browser.
I do not have a sim card yet because if I can't get the wifi to connect and work, I'll probably sell it.
Anyone have an idea what to do next? That includes you SAMSUNG! And YES I called your service techs and they are pretty much clueless about the Gear S2.
ravenjim said:
I too am having wifi connection problems. I have the Gear S2 AT&T model SM-R730A
I was getting the message sign-in procedure not supported and what I found was, since this device has no browser to input the login- username and password, you get that message.
Click to expand...
Click to collapse
You are mistaken.
You have to turn BT off to get wifi to actually turn on. If BT is on and connected, the watch will use PAN for networking, and not turn on the wifi radio.
Turn off BT. Shortly after, you can see APs listed in the wifi section of Connections that the watch is receiving. If you tap on one that is not already saved, it will prompt for a password that can be entered with the tiny keyboard.
If a saved AP won't connect, tap on it and hit the FORGET button. Then follow the above procedure.
Keep in mind that as long as BT is turned off, you will be connected "remotely", so notifications will be slower, and some functions are not available (controlling media on the phone from the watch, for example). Also, if you have a 3G version, outgoing calls will use the watch standalone number over 3G, not the phone.
dwallersv said:
You are mistaken.
You have to turn BT off to get wifi to actually turn on. If BT is on and connected, the watch will use PAN for networking, and not turn on the wifi radio.
Turn off BT. Shortly after, you can see APs listed in the wifi section of Connections that the watch is receiving. If you tap on one that is not already saved, it will prompt for a password that can be entered with the tiny keyboard.
If a saved AP won't connect, tap on it and hit the FORGET button. Then follow the above procedure.
Keep in mind that as long as BT is turned off, you will be connected "remotely", so notifications will be slower, and some functions are not available (controlling media on the phone from the watch, for example). Also, if you have a 3G version, outgoing calls will use the watch standalone number over 3G, not the phone.
Click to expand...
Click to collapse
Thank You for responding, but you must be missing something from my post.
Bluetooth connection to phone must be in standby mode, not actually turned off and then wifi will put it into remotely connected status. At this time you are able to connect to wifi networks that only require a password. I am able to do this much and it works fine.
It's when it needs to be authenticated (an open wifi with no lock shown but needs a username and password entered) as with most public wifi, and that's when it gives the sign in procedure not supported error even when synced wifi profiles from phone have been saved to gear s2.
I hope I'm missing something here but I've been working on this for awhile and nothing seems to work. Samsung techs are useless as we are on our own and I do appreciate any and all help.
Thanks Again!
no ravenjim, you are correct. I have the same issue at my job. We have an open wifi here at my job which allows all the employees to connect to using their phones or tablets and even personal laptops. However once connected you are taken to a AT&T welcome page with our company info and logo and are required to just hit connect. Once you click connect you can surf the internet with your personal devices.
So since the S2 does not have a browser I get the same error "sign in procedure not supported". Sucks but oh well
Does anyone experiencing low wifi signal on your gear s2 classic (wifi only)?? I did some test with my other samsung device in same position and get maybe 3 or 4 signal bar, but only 1 signal bar on my gear s2 sometimes no signal at all.
Is there any solution for this bug yet?
yes before the last update on my gear s2 classic SM-R732 everything was fine, now with the latest update R732XXU2CPC4 i can't get login to my wifi networks, and also the battery is easier to get drain, usually 1,5 days with several push notification, auto wake up gesture ON, moderate Heart Rate, brightness level on 7, watch faces using classic with black background + grande dial + date, but now i must charge the phone every 6-7 hours with the same setting, already factory reset the phone and still got the same situation. Is there another way to fix this rather than waiting the new updates? If possible i'll choose the previous firmware/software on my phone
I am having a similar problem with my WiFi connection, gear s2 was connecting fine to my home and work network for about a month now with no problems, suddenly today the same error msg posted here is appearing whenever i try to connect to my wifi at home, i did restart both phone and watch, also changed my wifi setting to visible and shortened my password, all with no luck, still getting same error msg...
Still got to try to reset the watch... Will that wipe out all my watch faces? Probably will... But if that doesn't fix it I won't be able to send my watch faces back from my PC, which is why i wanted to connect remotely in the first place, so i can install a new watch face...
Any suggestions?
Anyone solved thos problem?
P. S. I have a classic non lte version
Okay, how can we connect to public wifi at a library, mall, xfinity/comcast, starbucks, etc. where we are normally redirected to a browser to accept terms of service, or to sign on using account credentials before connecting to their wifi?
I requested that my work manually register my watch's mac address on the network, so it is saved as a device that has access. So you might want to reach out to your network team for a solution.
A question about using public WiFi. Is there any security risk to the watch in addition to the phone?