Hi,
I'm looking for a threeparted firmware for the galaxy note 2 LTE (N7105). Since im not a native englishspeaker, i have no idea if thats the right Word.
But i already talked to other guys in other forums and they were pretty sure it would work this way.
I already found it here:
http://forum.xda-developers.com/showthread.php?t=2199593
but I can't download it since Hofile is gone.
Could someody please upload it somewhere else or maybe find a new Source?
My Device is broken, i can only reach download-mode and i cant flash without the PIT:
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Related
Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
CovXX said:
Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
From what I have seen in ODIN none of this is right. Added should be 1rst line. Whole script line looks bad to me. Can't tell what you are doing. May need to PM me to avoid a brick.
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Since post was yesterday Mod may want to close this one. He got it or bricked it. :laugh:
nope didn't get it and isnt bricked either. Tryed again
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRBLK3_Bootchain_CWM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
jerrt010 said:
Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Updated instructions where? I keep getting the same thing. How did you fix it?
Where did you get the updated instructions? Please Tell
Sent from my SCH-I535 using xda app-developers app
Hi,
I'm trying to root my US Verizon Samsung Galaxy S3 phone running 4.1.1 using Samsung Galaxy S3 Tookit V7.0.0. When I get to the step to run Odin, I get the following log:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I'm not sure what the issue is and what to do next. I've ran it 3 times and same error. I'm using the stock USB cable that came with the Galaxy S3. Any help would be very much appreciated.
Thank you,
Sleeper
sleeper73 said:
Hi,
I'm trying to root my US Verizon Samsung Galaxy S3 phone running 4.1.1 using Samsung Galaxy S3 Tookit V7.0.0. When I get to the step to run Odin, I get the following log:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I'm not sure what the issue is and what to do next. I've ran it 3 times and same error. I'm using the stock USB cable that came with the Galaxy S3. Any help would be very much appreciated.
Thank you,
Sleeper
Click to expand...
Click to collapse
I found the answer. The rooting process is outdated on the toolkit. I had to follow this process:
http://forum.xda-developers.com/showthread.php?t=2046439
Wrong forum by the way. Its the galaxy 3 forum. Not the S3 forum
Sent from my GT-I5800 using xda app-developers app
Bought this Tab yesterday, seller said it only boots to download mode, he's right!!
I tried rooting and installing recovery and this is what i get
A big red FAIL and
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Am I screwed??
Can this be fixed?? Thanks guys!
You need to restore the partition information table PIT .
How sorry not sure enough to give advice there are a number of posts .
http://forum.xda-developers.com/showthread.php?t=2268735&page=5
Thanks for the help but I need much more help than that. I need a tut or step by step directions. Ive seached everywhere I can think of. I found the one you posted also but I hvae no clue how to use any of the info. I have successfully rooted and fixed a few devices but this is like a whole other level. Thanks
Hello,
i have an issue with my Galaxy S6 (SM-G920F UK VOD) i believe it to be bricked, and not soft bricked. i can't get the phone to boot no matter what i try.
It all started after i had rooted the device, the root was successful and worked a treat until i decided i would like to play about with twrp. now i can't locate E/ and there does not seem to be any contents inside of the system folder.
Any help would be greatly appreciated and sorry if i have left out any important info.
I don't know if this is important but i have a recovery log.
pastebin com /PKE5fzgJ
trying to flash stock firmware using odin v3.10
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm not sure if i just retarded or not. but i used this guide.
https://forum.xda-developers.com/ga...root-g955u-g955u1-snapdragon-sampwnd-t3658911
and my phone is currently BQK5, G955U, and every time i try to run the flash i get
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ive tried doing one file at a time but then i get a boot img fail because im not using the BL and the others just give model mismatch so my bad maybe? idk
i cant figure out whats going on. need some help on this one.