Database Info

gsmarti hard reset... power cut off

I was flashing my gsmarti's ROM this morning... I follow all the steps and it is successfully go into the "flashing environment"... Unfortunately, the process stuck at the beginning... and suddenly, it turn off itself... then, I cant switch on my phone anymore... and I dont even get the static Gigabyte screen as well...
Is there any solution to this?
Thank you!

Do you know where to find the Rom Upgrade Utility for your phone?
If you go to your carrier's website and log into it, do you by any chance have a downloadable file that will restore your phone to its factory settings?
There's also many different GSmart models .. which one do you have?
I looked up Gsmart phones, and their support site has firmware upgrades listed for some of their phones .... see if you're is listed.
http://www.gigabytecm.com/eng/gbc_supportcategory.aspx?sid=7&tabIndex=3

Thank for you reply =)
Actually i am using gsmart i (64)... and i have the latest firmware with me...
Because this device is using POCKET GHOST to restore and backup the system...
as i mentioned earlier... my "flashing" process is stuck at the beginnig... so, in my opinion, i think the pocket ghost has been deleted and i cant do the flashing anymore... is it true?

If it run's Windows Mobile ... you should be able to run the RUU at the bootloader screen....
As far as how do you get into the bootloader on your phone ... I have no idea.... on mine, I soft reset while holding the camera button in and keeping the camera button held in until the bootloader screen comes up which looks something like this (note i just randomly found this pic on google images)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi... thank you ya...
but i am still stuck in the black screen...
and i cant find any way to access into the bootloader...
i am searching the other sites... and i came across this:
they said if anything goes wrong during "flashing", the ROM will be locked...
is that true?
and one more thing, the bootloader, is it almost same as the bios (cmos) of
our pc?
and for your information... a lot of people are having the same problem...
thx thx... appreciate!! =)

Is this the bootloader?

Yep, that is our bootloader for the Gsmart series. On the i300 its accessed by pressing the red phone, green phone and power buttons at the same time.
If you want to change your ROM then you need to load the new version to your SD card (and I think it needs to be the only contents on the card).

[Q] My HTC Inc S not starting and Factory reset not working !

I have an HTC Inc S and i had it rooted and it all was fine. After installing Tor it worked nice until one time i was installing an App from the market and then it stopped !! i waited long enough didn't get back to work and then i removed the battery. when trying to restart the device it didnt start and got stuck at the HTC boot logo...
i can access the recovery mode but it hangs before i am able to flash any ROM.
the factory rest is not working as it just freeze when i press it !
this is my bootloader screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help me out with this ?!
Thanks a lot

Look for an ruu.
Google. Will fix it.
Sent from my PG86100 using Tapatalk

Didn't work !
I tried flashing the RUU.zip from the SD and i tried different ones but some doesn't work and others just stops when the progress bar reaches almost the end. and the phone freezes !!
the RUU's which are .exe on windows PC are mostly shared on filesharing sites and they all disabled the sharing option due to the new copyright problems !!
any idea on how to get those RUU's.exe other than filesharing sites ?!
thanks for ur reply

I assume your on a HTC Droid incredible 2 this is what you need
http://www.multiupload.com/MYOZFW9Q0Y
Then
Rename the file to "PG32IMG.zip" (without quotes)
Place it on the root of the SD Card, unplug the USB cable
Boot into the bootloader: turn off the device, hold power and volume down (make sure the phone is not connected to the computer)
Follow the on-screen directions
Sent from my PG86100 using Tapatalk

Media Fire link not valid !
This link on Mediafire is not valid ! it doesn't open anything !!
Would some one email me the Radio or upload the file to dropbox or Ubuntuone if thats possible
here is a photo of one of the Radios where it just stuck in the top of the progress bar after it gives me around 6 vibrations !!!
View attachment 897554

[Q] XT1032 - Downgrading from Lollipop back to stock [BRICKED]

Hey guys,
My phone offered me the upgrade to Lollipop which I mistakenly accepted.
After a week I began to despise the changes and "features" and decided to go back to what had come with the phone originally.
In my haste to return my phone to it's former glory I followed this guide : http://forum.xda-developers.com/showthread.php?t=2542219
I didn't get far, see the error message below :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After looking at other guides, including this one http://forum.xda-developers.com/mot...rick-hard-bricked-moto-g-2nd-gen-5-0-t2966010 I've now hit a dead end.
When I plug my phone into my computer in Device Manager it's listed as "Android Device -> Motorola ADB Interface" so I'm not seeing "qhsusb_bulk" that's specified in that unbrick guide. Perhaps it's not as bad as I think it is?
My phone is currently sitting in bootloader mode and I'm hoping someone can suggest something I can try to resolve this, even if it means going back to lollipop.
Thanks in advance.

numbchuck said:
Hey guys,
My phone offered me the upgrade to Lollipop which I mistakenly accepted.
After a week I began to despise the changes and "features" and decided to go back to what had come with the phone originally.
In my haste to return my phone to it's former glory I followed this guide : http://forum.xda-developers.com/showthread.php?t=2542219
I didn't get far, see the error message below :
After looking at other guides, including this one http://forum.xda-developers.com/mot...rick-hard-bricked-moto-g-2nd-gen-5-0-t2966010 I've now hit a dead end.
When I plug my phone into my computer in Device Manager it's listed as "Android Device -> Motorola ADB Interface" so I'm not seeing "qhsusb_bulk" that's specified in that unbrick guide. Perhaps it's not as bad as I think it is?
My phone is currently sitting in bootloader mode and I'm hoping someone can suggest something I can try to resolve this, even if it means going back to lollipop.
Thanks in advance.
Click to expand...
Click to collapse
Perhaps try this? http://forum.xda-developers.com/moto-g/general/guide-restore-softbricked-phone-t2965459

The following guide resolved my issue :
http://forum.xda-developers.com/moto-g/general/gpe-ota-lrx21z-5-0-1-xt1033-xt1032-t2969847

Need help for Nexus 7 2013 wifi

Hi everyone,
I bought a NEXUS 7 2013 (ASUS-2B16) a few days ago and I didn't like 5.0 so I started to downgrade by myself.
I followed the instruction of this page (I chose 4.4.2 (KOT49H) rom)
https://www.androidpit.com/how-to-downgrade-a-nexus
When I finished everything (I assumed everything went well because I didn't see any error message) and start to run the system, it stays on this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought 4.4.2 is not compatible so I flashed with 4.4.4(KTU84P) manually but with no luck.
So I tried Nexus Root Tool Kit see if I could fix it but again with no luck.
I started to do the research and I found this post from XDA
http://forum.xda-developers.com/showthread.php?t=2380913
The post description shows the same problem that I have so I followed the instruction until the step "FORMAT DATA in TWRP" then I am stuck again. IT shows an error message that the formation is failed.
After everything I gave up and I tried to follow this post to restore my Nexus 7
http://forum.xda-developers.com/showthread.php?t=2381438
Everything went well but AGAIN I am always stuck at loading page.
I started to look at details and I found some error messages as following.
First I found my Nexus 7 has no OS installed (I am not sure)
Secondly I found the tablet is trying to mount files from E drive but always fail.
I am totally a noob with Tablet but from my experience on Windows system I guess I deleted backup partition by accident. I am hoping this information could help you guys to help me repair my tablet. If you guys need more details please let me know. Thanks in advance.
Sorry, one more thing. When I enter the command "adb devices" at DOS mode I am not able to find the devices. However, when I enter bootloader mode my computer is able to connect to my tablet. Hope this could help. Thanks.

nobody can help ?

Impossible to reinstall a rom after root

Hello guys,
I'm new here, I've read a lot about your different topics and I'm admirative for some level god members with their answers :good: :laugh:
Indeed I'm a dev, but for websites so it's a bit different with phones for me, and I will try to explain as detailed as I can.
I have a samsung SM G965F, bought in Poland (I work here for the moment); And indeed tried to root it for private purposes.
I followed a tutorial; I was on Pie 9 (****tiest ever update for me); from there OEM in DEV tools was activated, and the TWRP was installed.
the phone wasn't root, but I had the TWRP options (when push Volume up+bixby+lock) so thought I'm on the good way, but only after, and there is my mistake, I understood by reading something that I should make faster an operation when enabled the OEM (before it start to delete all my infos) that I should switch to recovery mode (or installation) and if not there was a story with 7 days to wait.
So the phone was just reseted with only memory card datas not deleted, and the phone was working, just the OEM always disabled, and when you select to enable it it says "ok we reboot the phone you will loose all your files etcc..." and anyway after many attempts, it says always the same after the reboots, and never is enabled after. So I tried to install a new rom, and then I thought I had a problem, in the installation it was written "Secure Check Fail : PIT".
So I tried to found the right rom, with the number "6" inside as per this screen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the Secure Check Fail : PIT dissapeared and now its just Fail in Odin.
Also, I tried to reboot normally but it says that there was an error and I need to reinstall with smart view or smart touch, I don't really remember, so I just reinstalled the first TWRP and now the screen of my phone is looping on Samsung, and rebooting.
I'm lost, I spent from 3pm to 4 am yesterday in the internet to found a solution, so my final option is write to ask your help guys.
Hope you can help me, thank you in advance
PS: Sorry for the big picture, there is no acceptance unfortunately for resizing codes, or maybe I just still don't have access to this option cuz I have less than 10 messages, if need delete it or explain me if you need pictures, I did it 10 min ago, even if there is not a lot to do because i'm limited with my phone now