Hey guys... I just thought to post this new CWM Recovery v6.0.4.6 which support SELinux for device like LG-P500 (arm v6).
UPDATE: New recovery can flash all CM 10+ ROMs and CM 11.
This recovery has RAINBOW theme, Wana try press vol+ vol- button and then continuous press vol- and reclick back button. Enjoy KITKAT 4.4.2 and other CM 10+ ROMs on this CWM 6.0.4.6 recovery.
Update December 26, 2013:
recovery and format of sdext
Update Jan 16, 2014
Flash all CM10+ and CM11 ROMs
Backup restore problem solved (Linking Dexes and showing "zero' system space after boot)
___________________________________
Please 'HIT THANKS' if this really help you, Thanks meter encourage developer to work more enthusiastically
Very nice recovery. Did the trick for KitKat ROM.
Note however bug I found:
While previous 5.0.2.7 would fail to backup sd-ext, this one succeeds in doing so. Great.
However when restoring, sd-ext fails trying to format the (ext4) partition.
Word to wise: Backup sd-ext to PC before experimenting.
Note the 5.0.2.7, after a factory reset, left me with this partition unwritable so rather have it fail than bashup
could we ask one for P505?
thanks
laofan said:
could we ask one for P505?
thanks
Click to expand...
Click to collapse
You can ask hephappy ...
If you can contact him...
he
Sent from my LG-P500 using xda premium
---------- Post added at 11:00 AM ---------- Previous post was at 10:59 AM ----------
nomancoolboy said:
You can ask hephappy ...
If you can contact him...
his email address [email protected]
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Sent from my LG-P500 using xda premium
KitKat Preview Version for P500 (Requires CWM Recovery v6.0.4.5) by hephappy:
http://www.mediafire.com/hephappy#b697xnkc74c6n
I have a huge problem: the recovery installs only cm11! Any other Rom I try to flash(cm10.2) doesn't work! It says status 7 and something about device (get.prop.device .....)
Am I the only one having this problem??
borchaniz said:
I have a huge problem: the recovery installs only cm11! Any other Rom I try to flash(cm10.2) doesn't work! It says status 7 and something about device (get.prop.device .....)
Am I the only one having this problem??
Click to expand...
Click to collapse
We all have that problem ..
Just flash another recovery ..for other roms
Sent from my LG-P500 using xda premium
nomancoolboy said:
We all have that problem ..
Just flash another recovery ..for other roms
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I have the solution for this problem(ibub told me about it)
Just copy the assert statement(first lines in updater script) from kitkat roms to the rom you want to flash and everything should be fine.
borchaniz said:
I have the solution for this problem(ibub told me about it)
Just copy the assert statement(first lines in updater script) from kitkat roms to the rom you want to flash and everything should be fine.
Click to expand...
Click to collapse
Flashing another recovery takes 4 seconds
Sent from my LG-P500 using xda premium
Well, People who tried Kitkat preview can post their reviews.
Does this Rom works with network fix for old baseband?
laofan said:
could we ask one for P505?
thanks
Click to expand...
Click to collapse
Just try this... could work for p505 too..:good:
borchaniz said:
I have the solution for this problem(ibub told me about it)
Just copy the assert statement(first lines in updater script) from kitkat roms to the rom you want to flash and everything should be fine.
Click to expand...
Click to collapse
What kind of tool for easy to edit updater script?
Thanks
z1022 said:
What kind of tool for easy to edit updater script?
Thanks
Click to expand...
Click to collapse
Use Notepad++, google it...:good:
It Works!
No Cell Sevice. No Wi-fi. No Bluetooth No Gapps. But Looks Nice! xD
Photos:
borchaniz said:
I have the solution for this problem(ibub told me about it)
Just copy the assert statement(first lines in updater script) from kitkat roms to the rom you want to flash and everything should be fine.
Click to expand...
Click to collapse
mukulsoni said:
Use Notepad++, google it...:good:
Click to expand...
Click to collapse
I know Notepad++ but I don't sure how to re-zip the ROM.
Can I follow below link??
http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/
z1022 said:
I know Notepad++ but I don't sure how to re-zip the ROM.
Can I follow below link??
http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/
Click to expand...
Click to collapse
I would suggest you 'Cygwin' tool for that, just find on xda forum, you will find linux command too..;:good:
@mukulsoni
Firstly I would like to thanks for your excellent work of this CWM Recovery As you suggested on the Android 4.3 thread I did install this recovery, flashed cm-11-UNOFFICIAL-20131216 with no error :good:, and kitkat booted on my p500 eventually :victory: :beer: , as reported by others.
Brief review for Recovery
Bit laggy compare to v5.0.2.7, can not backup and restore sd-ext. (failed on /dev/block/mmcblk0p2. Error while formatting /sd-ext). It's the culprit kitkat failed to mount sdcard?
Request:
It"ll get 5 stars for touch version as v5.0.2.7 by vivekkalady. NotOnlyEyes provided touch (well, actually not fully touch from my opinion) version 6.0.4.5 but an error occur while flashing cm-11.
Anyway, thanks for the great works
xu3sno said:
@mukulsoni
Firstly I would like to thanks for your excellent work of this CWM Recovery As you suggested on the Android 4.3 thread I did install this recovery, flashed cm-11-UNOFFICIAL-20131216 with no error :good:, and kitkat booted on my p500 eventually :victory: :beer: , as reported by others.
Brief review for Recovery
Bit laggy compare to v5.0.2.7, can not backup and restore sd-ext. (failed on /dev/block/mmcblk0p2. Error while formatting /sd-ext). It's the culprit kitkat failed to mount sdcard?
Request:
It"ll get 5 stars for touch version as v5.0.2.7 by vivekkalady. NotOnlyEyes provided touch (well, actually not fully touch from my opinion) version 6.0.4.5 but an error occur while flashing cm-11.
Anyway, thanks for the great works
Click to expand...
Click to collapse
Seems only laggy to get first menu, a couple of other places. Can live with that.
The failure to format is its own error, I believe. Saw commits about a fix.
The other error is that clearing Dalvik Cache also kills link2sd's on sd-ext. At least, this should be a option.
Generally, touch versions are more problematic, sometimes do not fit screen, etc. Better off as we are.
New Update: SDEXTRestore fixed :highfive:
Update December 26, 2013:
recovery and format of sdext
http://forum.xda-developers.com/showpost.php?p=48367371&postcount=1
Related
Thanks:
-Drockstar for CWM for the Epic
-Koush for CWM
-Team Win for the recovery injector
Info
This is a zip to restore CWM from TWRP if you flashed TWRP and you hate it or if a kernel you like has TWRP and you prefer CWM.
This has been tested flashing using TWRP while on ICS.
I am not responsible for anything that happens s a result of flashing this.
Make sure "Inject TWRP" is unchecked before flashing.
Download
http://marcusant.com/android/epic/restore-cwm.zip
FIRST!! ..
always wanted to do that ... after reading how everyone else always wanted to do it : D
ha!
Thanks Marcus!
Sent from my SPH-D700 using xda premium
kennyglass123 said:
Thanks Marcus!
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Your name is all cool and red and stuff
marcusant said:
Your name is all cool and red and stuff
Click to expand...
Click to collapse
lol haha we uncheck inject TWRP but do we check zip file sig verif. and Force md5? Or just leave all 3 unchecked and we should be okay?
Much appreciated
XxLostSoulxX said:
lol haha we uncheck inject TWRP but do we check zip file sig verif. and Force md5? Or just leave all 3 unchecked and we should be okay?
Much appreciated
Click to expand...
Click to collapse
I have nothing checked
marcusant said:
I have nothing checked
Click to expand...
Click to collapse
So say someone has mistakenly let rom manager flash the bml cwm, could they use this to restore to the mtd cwm? Just a question, I didn't do that, just would like to know bcuz I know a few people on here have done that in the past not knowing better...
flastnoles11 said:
So say someone has mistakenly let rom manager flash the bml cwm, could they use this to restore to the mtd cwm? Just a question, I didn't do that, just would like to know bcuz I know a few people on here have done that in the past not knowing better...
Click to expand...
Click to collapse
probably not
Gr8 having different options w/ the recoveries.............good of you to make this for us Marcus, Thank you.
..........sent from today's android 4.0.4
flastnoles11 said:
So say someone has mistakenly let rom manager flash the bml cwm, could they use this to restore to the mtd cwm? Just a question, I didn't do that, just would like to know bcuz I know a few people on here have done that in the past not knowing better...
Click to expand...
Click to collapse
I thought that rom manager used a temp-boot copy, so flashing it wouldn't overwrite the recovery that you access from the three finger boot?
Sent from my SPH-D700 using XDA
styles420 said:
I thought that rom manager used a temp-boot copy, so flashing it wouldn't overwrite the recovery that you access from the three finger boot?
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
Alls I know is a few people have soft bricked their phone by making that mistake with rom manager...
I have backups that I made using CWM, as well as backups made using TWRP, + these ALL work..........and I have used the kexec temp CWM from the CM Team w/ good results as well...............yes we all have our preferences as to which recovery to use + why, but *this* Recovery Restore is now indispensable to me going forward............... + it's just awesome having the option to switch our recovery direct from TWRP.
..........sent from today's android 4.0.4
sonarchist said:
I have backups that I made using CWM, as well as backups made using TWRP, + these ALL work..........and I have used the kexec temp CWM from the CM Team w/ good results as well...............yes we all have our preferences as to which recovery to use + why, but *this* Recovery Restore is now indispensable to me going forward............... + it's just awesome having the option to switch our recovery direct from TWRP.
..........sent from today's android 4.0.4
Click to expand...
Click to collapse
please fix your period key or fingers, whichever is broken.
beltsnspoons said:
please fix your period key or fingers, whichever is broken.
Click to expand...
Click to collapse
........too little, too late! Lol.
..........sent from today's android 4.0.4
I' am not able to restore CWM in place of TWRP. I could not post here earlier owing to the issue of 10 posts and i have crossed it just a while ago on another post on the same issue.
TWRP gives me an error message "unknown md5 error" for any zip file that i try to flash and hence i' am now stuck with ROM (MIUI V4) and the Kernel (Nyan Colonel). Due to the same error i' am unable to flash the CWM restore too. Is there any other way that i could restore CWM other than going back to stock with ODIN ?
Thanks
yaji63 said:
I' am not able to restore CWM in place of TWRP. I could not post here earlier owing to the issue of 10 posts and i have crossed it just a while ago on another post on the same issue.
TWRP gives me an error message "unknown md5 error" for any zip file that i try to flash and hence i' am now stuck with ROM (MIUI V4) and the Kernel (Nyan Colonel). Due to the same error i' am unable to flash the CWM restore too. Is there any other way that i could restore CWM other than going back to stock with ODIN ?
Thanks
Click to expand...
Click to collapse
there is an option on TWRP to skip md5 check, just try to disabling md5 check..
didhiy said:
there is an option on TWRP to skip md5 check, just try to disabling md5 check..
Click to expand...
Click to collapse
well everything is unchecked and inspite of it i get this error. This error comes up for each and every zip file and hence no flashing is possible
Is there a restore twrp from cwm flashable zip???
Sent from my SPH-D700 using Tapatalk
DaKillaWilla said:
Is there a restore twrp from cwm flashable zip???
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Ya... its called flash the twrp.zip in cwm... there is no zip for mtd cwm, but there is for twrp, if that clears it up for you at all....
FatToad release thread and build/development discussion
What this is: This is an Unofficial CyanogenMod based image for the Samsung Galaxy S Relay 4G (apexqtmo) by TeamApexQ.
Latest released version: FatToad-5.0.2_0001
https://googledrive.com/host/0B-v962-Q8Pd9VWtvN0VrTXlQaTg/FatToad-5.0.2_0001-apexqtmo.zip
https://googledrive.com/host/0B-v962-Q8Pd9VWtvN0VrTXlQaTg/FatToad-5.0.2_0001-apexqtmo.zip.md5sum -- md5
Use the latest officially released CWM recovery -- https://googledrive.com/host/0B-v962-Q8Pd9VWtvN0VrTXlQaTg/apexq_recovery-10.2-347.zip
Compatible gapps - https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
**FLASH THIS ONLY WITH CWM** -- Wifi will NOT WORK if you flash from TWRP.
ignore any warning at the end of the installation about /data already being mounted.
Great! Thanks for your work...testing
As more bugs are discovered, worked on, fixed and what have you, I will endeavor to update the OP, keep an eye on this space.
Would it be helpful for testers to report bugs here?
Flashing with CWM 6.0.1.2 fails with error
set_metadata_recursive: some changes failed (Status 7)
Click to expand...
Click to collapse
After some Googling it looks like I need to update my CWM, gonna try that next. Glad I did a backup.
Edit:
After CWM update it flashes correctly!
wedg11383 said:
Would it be helpful for testers to report bugs here?
Click to expand...
Click to collapse
I suppose it would, especially if not currently on the list in the OP. Although, keep in mind that the team is not yet ready to go into full support mode for these builds yet. This is just a preview of what we are working on.
user032 said:
After some Googling it looks like I need to update my CMW, gonna try that next. Glad I did a backup.
Click to expand...
Click to collapse
Yes. The one currently linked in the CM wiki, http://cmw.cmfs.me/apexqtmo/apexq_recovery-10.2.img works. You were trying it with the old CM 10.1 recovery. This is far too old.
Magamo said:
I suppose it would, especially if not currently on the list in the OP. Although, keep in mind that the team is not yet ready to go into full support mode for these builds yet. This is just a preview of what we are working on.
Yes. The one currently linked in the CM wiki, http://cmw.cmfs.me/apexqtmo/apexq_recovery-10.2.img works. You were trying it with the old CM 10.1 recovery. This is far too old.
Click to expand...
Click to collapse
If I flash from rom manager then I have also the latest recovery, right ?
couldn't restore my backup with recovery (maybe bad sd card issue).
edit: was a bad microsdcard !
robuser007 said:
If I flash from rom manager then I have also the latest recovery, right ?
couldn't restore my backup with recovery (maybe bad sd card issue).
Click to expand...
Click to collapse
Which recovery are you using? I do not know what version of recovery that ROM manager gets you. I've never used that. Please specifically flash a compatible recovery. Some time not long before the release of the recovery I linked, recovery could not access SD cards on the relay. The one linked is certified as compatible. If you're having trouble with your backup restore using that recovery, than it's likely a problem on your card or the backup set.
Magamo said:
Which recovery are you using? I do not know what version of recovery that ROM manager gets you. I've never used that. Please specifically flash a compatible recovery. Some time not long before the release of the recovery I linked, recovery could not access SD cards on the relay. The one linked is certified as compatible. If you're having trouble with your backup restore using that recovery, than it's likely a problem on your card or the backup set.
Click to expand...
Click to collapse
Thanks for the information, could you provide a zip file instead of a img for the recovery ?
robuser007 said:
Thanks for the information, could you provide a zip file instead of a img for the recovery ?
Click to expand...
Click to collapse
Actually, I can link to my personal one.
https://googledrive.com/host/0B-v962-Q8Pd9VWtvN0VrTXlQaTg/apexq_recovery-10.2-347.zip
Once you install it, remember to go into advanced, and reboot to recovery so that you're using the newer one rather than your older one.
Also, everyone, it's been pointed out that I'm an idiot. I was using a ParanoidAndroid Gapps package, that was deleting Gallery2, and replacing it with GoogleGallery. When using the correct Gallery app, video recording works fine.
Gapps: http://d-h.st/3k8
Is it worth to install on wife phone, also how stable is the camera,
Sent from my SGH-T989 using Tapatalk
alphaeagle777 said:
Is it worth to install on wife phone, also how stable is the camera,
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
It depends. Do you want to piss her off?
alphaeagle777 said:
Is it worth to install on wife phone, also how stable is the camera,
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I'll point out where I say in the subject of the OP, this is a Pre-Alpha, and later in the thread where I said that the team is not quite ready to be in full support mode for this version, this is a preview release. The camera though is quite stable, so long as you are using the certified gapps linked by Nardholio, and also linked in the OP.
Magamo said:
Actually, I can link to my personal one.
https://googledrive.com/host/0B-v962-Q8Pd9Q3F5Y1Z5Nm42c28/apexq_recovery-10.2-347.zip
Once you install it, remember to go into advanced, and reboot to recovery so that you're using the newer one rather than your older one.
Also, everyone, it's been pointed out that I'm an idiot. I was using a ParanoidAndroid Gapps package, that was deleting Gallery2, and replacing it with GoogleGallery. When using the correct Gallery app, video recording works fine.
Click to expand...
Click to collapse
Can't boot to recovery now, are you sure I can use that recovery while using cm10.2 ?
robuser007 said:
Can't boot to recovery now, are you sure I can use that recovery while using cm10.2 ?
Click to expand...
Click to collapse
The one I linked is a CM 10.2 recovery.
Magamo said:
The one I linked is a CM 10.2 recovery.
Click to expand...
Click to collapse
The recovery.zip doesn't work, tested it twice.
robuser007 said:
The recovery.zip doesn't work, tested it twice.
Click to expand...
Click to collapse
The recovery zip worked just fine for me.
Sent from my SGH-T699 using Tapatalk
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
I would recommend the one from ROM manager should be the same.
Sent from my SGH-T699 using Tapatalk
chris122380 said:
The recovery zip worked just fine for me.
Sent from my SGH-T699 using Tapatalk
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
I would recommend the one from ROM manager should be the same.
Sent from my SGH-T699 using Tapatalk
Click to expand...
Click to collapse
The rommanager's one is 6.0.3.8, but can't mount the sdcard (need external mSD-reader).
Why doesn't it work on my phone ? Strange :s
robuser007 said:
The rommanager's one is 6.0.3.8, but can't mount the sdcard (need external mSD-reader).
Why doesn't it work on my phone ? Strange :s
Click to expand...
Click to collapse
It's been mounting my SD card just fine. Doesn't work 100‰ with ROM manager so I boot into recovery mode to do everything.
Sent from my SGH-T699 using Tapatalk
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
explicitKC said:
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
Click to expand...
Click to collapse
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
explicitKC said:
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
Click to expand...
Click to collapse
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
explicitKC said:
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
explicitKC said:
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
Click to expand...
Click to collapse
I am currently using TWRP, but I have used PhilzTouch in the past. They both work pretty well. TWRP has bigger buttons that are spaced out better and has an easier interface to use. PhilzTouch has some other features but isn't as polished. It is just a matter of personal preference. Some Roms will have a recommended recovery listed, though.
Also, to make sure that the zip you download isn't corrupted, check the md5 of the zip you download against the md5 on the download page.
Sent from my SGH-T989 using Tapatalk
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Edit:-
One more thing I would like to add,Phillz touch blackhawk supports dual-booting through next kernel
lokesh.3440 said:
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Click to expand...
Click to collapse
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
really,which one are you referring to ? TWRP 2.7.0.3 ?
lokesh.3440 said:
really,which one are you referring to ? TWRP 2.7.0.3 ?
Click to expand...
Click to collapse
I am currently using 2.7.0.1 but 2.7.0.3 also has it. The one that I linked to was compiled by Android-Andi
Sent from my SGH-T989 using XDA mobile app
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Just wanted to say thanks again to jrc2. I went with TWRP because backup to sd card was not working on CWM and Philz. Backup would start and in the middle of backing up data or system tab would just reboot. But TWRP looks ok and flashed with no problems.
My Asus TF300TG is completely rooted and unlocked. I want to do a backup (without using a SDCARD), but I get these errors:
CWM-based recovery v6.0.2.3
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Can't mount backup path.
CAN SOMEONE HELP ME!
Please i need help! D:
I've found this... http://forum.xda-developers.com/showthread.php?t=2617298 So I can normally install TWRP without deleting CWM?
0144walter said:
Please i need help! D:
I've found this... http://forum.xda-developers.com/showthread.php?t=2617298 So I can normally install TWRP without deleting CWM?
Click to expand...
Click to collapse
Why don't you just flash a different recovery and use that instead of cwm?
Sent from my SM-N900T using XDA Free mobile app
andrewnelson23 said:
Why don't you just flash a different recovery and use that instead of cwm?
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Thats what i want to do... But I do I need to delete the old one? Or they just replace himself?
Thanks for the reply BTW
(sorry, but its the first time doing these things and sorry for my bad english )
0144walter said:
Thats what i want to do... But I do I need to delete the old one? Or they just replace himself?
Thanks for the reply BTW
(sorry, but its the first time doing these things and sorry for my bad english )
Click to expand...
Click to collapse
When you fastboot flash a different recovery, it will delete the cwm recovery and overwrite the whole recovery partition.
Sent from my SM-N900T using XDA Free mobile app
andrewnelson23 said:
When you fastboot flash a different recovery, it will delete the cwm recovery and overwrite the whole recovery partition.
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
OK, now it worked! BUT (yep, there are more problems here) with Cyanogenmod my camera and Wi-Fi dont want to work! And if I try to restore my stock rom, the boot is infinite! I've tried doing WIPE (Factory Reset) but the problem still persist! D: :crying:
0144walter said:
OK, now it worked! BUT (yep, there are more problems here) with Cyanogenmod my camera and Wi-Fi dont want to work! And if I try to restore my stock rom, the boot is infinite! I've tried doing WIPE (Factory Reset) but the problem still persist! D: :crying:
Click to expand...
Click to collapse
What are your exact steps? Which cyanogenmod ROM are you flashing? Which recovery did you use? You'll have to use twrp 2.5 I think to restore stock ROM.
Sent from my SM-N900T using XDA Free mobile app
andrewnelson23 said:
What are your exact steps? Which cyanogenmod ROM are you flashing? Which recovery did you use? You'll have to use twrp 2.5 I think to restore stock ROM.
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
The Cyanogemod file is called cm-10.2.1-tf300t.zip (I guess thats Cyanogenmod 10.2), I used the backup that I've made before installing CM... The recovery is TWRP and its version is v2.6.0.0
What is wrong? D:
Thats what I have done:
Unlock bootloader with Asus program
Root
Installed CWM recovery and changed it to TWRP
Backup
Flashed Cyanogenmod, it boots fine but WiFi and camera doesnt work
Restore the stock ROM, but it keeps bootlooping! Even doing WIPE, the problem persist
UPDATE: Is this ROM good for my tablet? http://forum.xda-developers.com/showthread.php?t=2425390
0144walter said:
The Cyanogemod file is called cm-10.2.1-tf300t.zip (I guess thats Cyanogenmod 10.2), I used the backup that I've made before installing CM... The recovery is TWRP and its version is v2.6.0.0
What is wrong? D:
Thats what I have done:
Unlock bootloader with Asus program
Root
Installed CWM recovery and changed it to TWRP
Backup
Flashed Cyanogenmod, it boots fine but WiFi and camera doesnt work
Restore the stock ROM, but it keeps bootlooping! Even doing WIPE, the problem persist
UPDATE: Is this ROM good for my tablet? http://forum.xda-developers.com/showthread.php?t=2425390
Click to expand...
Click to collapse
You're getting really dated software. Give me a second I will find some links.
Sent from my SM-N900T using XDA Free mobile app
andrewnelson23 said:
You're getting really dated software. Give me a second I will find some links.
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Thank you so much! YOU ARE MY HERO
No problem man.
Download http://www.androidfilehost.com/?fid=23329332407579270. This is the twrp file. fastboot flash that.
Next, download https://s.basketbuild.com/filedl/de...ip&dluid=343be2b9-36d2-4262-8978-633fbd9b8565. This is the latest pacman ROM. Its pretty stable for me. If you would like a custom kernel, let me know.
You will also need gapps. Find and download a gapps package from here: http://forum.xda-developers.com/showthread.php?t=2397942.
Put both gapps and pacman ROM on your tablet or an sdcard to put in your tablet. Perform a wipe in your new twrp recovery and then install ROM and then install gapps(don't reboot between installs). Should be good to go after that.
Sent from my SM-N900T using XDA Free mobile app
andrewnelson23 said:
No problem man.
Download http://www.androidfilehost.com/?fid=23329332407579270. This is the twrp file. fastboot flash that.
Next, download https://s.basketbuild.com/filedl/de...ip&dluid=343be2b9-36d2-4262-8978-633fbd9b8565. This is the latest pacman ROM. Its pretty stable for me. If you would like a custom kernel, let me know.
You will also need gapps. Find and download a gapps package from here: http://forum.xda-developers.com/showthread.php?t=2397942.
Put both gapps and pacman ROM on your tablet or an sdcard to put in your tablet. Perform a wipe in your new twrp recovery and then install ROM and then install gapps(don't reboot between installs). Should be good to go after that.
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
The 2nd link is broken D: (I dont care about 3G... I only want my tablet to work properly )
UPDATE: Solved broken link... but I have a question... how do I install TWRP with a .img file? When I've flashed the recovery it was a .blob file... help me please D:
0144walter said:
The 2nd link is broken D: (I dont care about 3G... I only want my tablet to work properly )
UPDATE: Solved broken link... but I have a question... how do I install TWRP with a .img file? When I've flashed the recovery it was a .blob file... help me please D:
Click to expand...
Click to collapse
Sorry I was out at the lake. I think in the fastboot command you just replace .blob with .img
Sent from my SM-N900T using XDA Free mobile app
---------- Post added at 11:44 PM ---------- Previous post was at 11:36 PM ----------
0144walter said:
The 2nd link is broken D: (I dont care about 3G... I only want my tablet to work properly )
UPDATE: Solved broken link... but I have a question... how do I install TWRP with a .img file? When I've flashed the recovery it was a .blob file... help me please D:
Click to expand...
Click to collapse
fastboot -i 0x0B05 flash recovery twrp.img
Sent from my SM-N900T using XDA Free mobile app
Hey guyz i need a serious help...i was using custom rom in HTC with TWRP installed in it but now my phone is bricked!! In fastboot my computer cant recognize it can't flash any recovery not even flash any rom using twrp recovery when i wipe it shows failed to mount system failed to wipe data!!!! PLzzzzzzzzzzzzz help me guyzzzz Plzzzzzzz :crying:
sushantsaurav2010 said:
Hey guyz i need a serious help...i was using custom rom in HTC with TWRP installed in it but now my phone is bricked!! In fastboot my computer cant recognize it can't flash any recovery not even flash any rom using twrp recovery when i wipe it shows failed to mount system failed to wipe data!!!! PLzzzzzzzzzzzzz help me guyzzzz Plzzzzzzz :crying:
Click to expand...
Click to collapse
Fastboot not recognizing is probably a driver issue. Failing to mount stuff can be due to OC partition layout, and remember, Windows will never recognise anything except your sdcard. What you can do is repartition your sdcard, according to the suggested pattern. With one gb ext2 and 128mb ext2.
Sent from my HTC Explorer A310e using Tapatalk
MSF Jarvis said:
Fastboot not recognizing is probably a driver issue. Failing to mount stuff can be due to OC partition layout, and remember, Windows will never recognise anything except your sdcard. What you can do is repartition your sdcard, according to the suggested pattern. With one gb ext2 and 128mb ext2.
Sent from my HTC Explorer A310e using Tapatalk
Click to expand...
Click to collapse
please help me i also cant flash any rom on my pico i get the error by twrp that unable to mount system
my pico is recognized by pc
sorry for bad english. i'm new here
sbappi said:
please help me i also cant flash any rom on my pico i get the error by twrp that unable to mount system
my pico is recognized by pc
sorry for bad english. i'm new here
Click to expand...
Click to collapse
Switch to a new recovery from dl.twrp.me/pico, use latest available. Then report again.
Sent from my HTC Explorer A310e using XDA Labs
MSF Jarvis said:
Switch to a new recovery from dl.twrp.me/pico, use latest available. Then report again.
Sent from my HTC Explorer A310e using XDA Labs
Click to expand...
Click to collapse
thankks for quick reply.
Now I'm on latest twrp 3.0.0.0 recovery but it gives an error wile flashing.. some symlinks failed error 7
I also tried cwm but it says E: can't open /cache/recovery/log
E: cant't open /cache/recovery/last_log.
please help me with this i really want my pico back.... Thanks in advance.
sbappi said:
thankks for quick reply.
Now I'm on latest twrp 3.0.0.0 recovery but it gives an error wile flashing.. some symlinks failed error 7
I also tried cwm but it says E: can't open /cache/recovery/log
E: cant't open /cache/recovery/last_log.
please help me with this i really want my pico back.... Thanks in advance.
Click to expand...
Click to collapse
Which ROM?? You can happily use one of the latest ROMs by me, they have been tested with the new recovery to work well
tried your FIUI from https://technologistguild.com the same symlink error appeared i think there is problem with my device.
I cant reply you there i dont know why.
I tried speeddroid and jaggyrom with both: twrp and cwm. Twrp says the symlink error and with cmw successfully installed but stuck at boot animation.
sbappi said:
tried your FIUI from https://technologistguild.com the same symlink error appeared i think there is problem with my device.
I cant reply you there i dont know why.
I tried speeddroid and jaggyrom with both: twrp and cwm. Twrp says the symlink error and with cmw successfully installed but stuck at boot animation.
Click to expand...
Click to collapse
That forum is thoroughly ****ed up, so don't bother. I'm moving stuff into my blog at msfjarvis.me
I still am unable to find the issue with your device, and don't have the time right now.
Sent from my HTC Explorer A310e using Tapatalk
MSF Jarvis said:
That forum is thoroughly ****ed up, so don't bother. I'm moving stuff into my blog at msfjarvis.me
I still am unable to find the issue with your device, and don't have the time right now.
Sent from my HTC Explorer A310e using Tapatalk
Click to expand...
Click to collapse
I dont mind.
I will try to find my answer on other threads as there are dozen of em solved and unsolved.
But try to help me when you are free.
REPORT: Twrp also shows that cant open cache\recovery\log.
Reply me when you are free.. Thanks.
sbappi said:
I dont mind.
I will try to find my answer on other threads as there are dozen of em solved and unsolved.
But try to help me when you are free.
REPORT: Twrp also shows that cant open cache\recovery\log.
Reply me when you are free.. Thanks.
Click to expand...
Click to collapse
Recovery log is not a very big problem, though as I am seeing my device tree, it should have mounted fine. I'll bug you some more about this later because I'm the official maintainer and thus it's my responsibility to do so.
Sent from my HTC Explorer A310e using Tapatalk
MSF Jarvis said:
Recovery log is not a very big problem, though as I am seeing my device tree, it should have mounted fine. I'll bug you some more about this later because I'm the official maintainer and thus it's my responsibility to do so.
Sent from my HTC Explorer A310e using Tapatalk
Click to expand...
Click to collapse
Do you think that i must have burnt my nand. Can you tell me how to verify it in recovery mode. Thanks.
sbappi said:
Do you think that i must have burnt my nand. Can you tell me how to verify it in recovery mode. Thanks.
Click to expand...
Click to collapse
There's no actual way to verify it but I suggest that you just recover all your NAND just for safety
MSF Jarvis said:
There's no actual way to verify it but I suggest that you just recover all your NAND just for safety
Click to expand...
Click to collapse
Thank you @MSF Jarvis, i really appriciate your help. I just flashed glade rom repartitioned sd card as told in glade rom thread.
Question: Now how do i partion my sd card to return to kk roms and others.
Thanks
sbappi said:
Thank you @MSF Jarvis, i really appriciate your help. I just flashed glade rom repartitioned sd card as told in glade rom thread.
Question: Now how do i partion my sd card to return to kk roms and others.
Thanks
Click to expand...
Click to collapse
Just flash any KitKat ROM with the new recovery and you're set
Sent from my HTC Explorer A310e using XDA Labs
I am on glade rom and i have 2 sd card partitions >sd-data and sd-system. And last time i removed sd-system, i got cant mount system error on twrp. Thats why i am asking you for partition details.
sbappi said:
I am on glade rom and i have 2 sd card partitions >sd-data and sd-system. And last time i removed sd-system, i got cant mount system error on twrp. Thats why i am asking you for partition details.
Click to expand...
Click to collapse
Keep only two sd ext partitions, first sd-data, second sd-cache. Then flash any NEW (awesom3 supported) ROM and you should be fine
MSF Jarvis said:
Keep only two sd ext partitions, first sd-data, second sd-cache. Then flash any NEW (awesom3 supported) ROM and you should be fine
Click to expand...
Click to collapse
everything is fine now thank you
sbappi said:
everything is fine now thank you
Click to expand...
Click to collapse
My pleasure. Keep dropping by the CyanogenMod11 thread as well, I will be uploading Glade ROM 5.0 soon that can be flashed using this recovery.
MSF Jarvis said:
My pleasure. Keep dropping by the CyanogenMod11 thread as well, I will be uploading Glade ROM 5.0 soon that can be flashed using this recovery.
Click to expand...
Click to collapse
You da best.
I decided to flash pac rom but i could not find links to download. Can you send me links?
sbappi said:
You da best.
I decided to flash pac rom but i could not find links to download. Can you send me links?
Click to expand...
Click to collapse
Sure! Go to my blog's PAC ROM section , the links to the ROM and working GApps are at the bottom. Please ensure you download Build #3 which I have labeled as the "Current LTS Version" since it is the most bug-free and stable version we've done.
Thanks for your support!
Cheers,
MSF Jarvis