i can get it work on cm11 4.4 by altered but after that i saw and updates 4.4.1 i install it and it fail to boot now i reinstall 4.4 and same problem happen..i try to wipe..but nothing works.i use system 3 on BMM..can someone give me solution?
xagentreaper said:
i can get it work on cm11 4.4 by altered but after that i saw and updates 4.4.1 i install it and it fail to boot now i reinstall 4.4 and same problem happen..i try to wipe..but nothing works.i use system 3 on BMM..can someone give me solution?
Click to expand...
Click to collapse
The battery off, restart the have a look
yx868868 said:
The battery off, restart the have a look
Click to expand...
Click to collapse
DA FAQ ????
He means that you need to take battery & restart. But can do even without removing back cover just hold (+)+(-)+pwr button. This metod is Cold Reboot.
Sent from my MB865 using Tapatalk
Related
Hey people.. earlier when i was using ICS there was battery problem.. so i flashed xxkpe but also it became freezing after that I flash ddlf2... the freeze problem stopped... Now again when I flash CM9 Alpha 11... it started freezing can anybody tell me whats the matter?
Give it a while to stabilise. I experience freezing occasionally on all rooms, sometimes even freezes 3 after 3 times I pulled the batt.
Sent from my GT-I9003 using xda app-developers app
bscraze said:
Give it a while to stabilise. I experience freezing occasionally on all rooms, sometimes even freezes 3 after 3 times I pulled the batt.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
till then what shall I Do? Switch back to ddlf2 again?
anuragvivek93 said:
till then what shall I Do? Switch back to ddlf2 again?
Click to expand...
Click to collapse
Anything will do, depends on which rom you like. If after 1 day it doesn't stabilise idk then.
Sent from my GT-I9003 using xda app-developers app
Wipe Cache/Dalvik and data.
DON'T use the device after the first boot, let it just sit there alone for 10 minutes, reboot it and start using it after, works for me everytime, i guess it's just cache regenerating all over again which can cause slow performance and can get corrupted sometimes causing freezes.
Skander1998 said:
Wipe Cache/Dalvik and data.
DON'T use the device after the first boot, let it just sit there alone for 10 minutes, reboot it and start using it after, works for me everytime, i guess it's just cache regenerating all over again which can cause slow performance and can get corrupted sometimes causing freezes.
Click to expand...
Click to collapse
i tried again today but the freezing dont stop as soon as I flash CM9 from ddlf2
can anybody help?
anuragvivek93 said:
can anybody help?
Click to expand...
Click to collapse
Did you follow the steps ONE BY ONE on the CM9 thread? you should use the flashing from stock method, all of the steps.
If you did that, try another base rom (XXKPU) and then flash CM9 on it.
Skander1998 said:
Did you follow the steps ONE BY ONE on the CM9 thread? you should use the flashing from stock method, all of the steps.
If you did that, try another base rom (XXKPU) and then flash CM9 on it.
Click to expand...
Click to collapse
i could have but last try i tried CM9 it was freezing and i put if offf.... Now the phone is not getting on ? Is phone bricked? i cant go into recovery or download
anuragvivek93 said:
i could have but last try i tried CM9 it was freezing and i put if offf.... Now the phone is not getting on ? Is phone bricked? i cant go into recovery or download
Click to expand...
Click to collapse
If it was working fine before you turned it off, it's probably not a brick.
Maybe it's a hardware failure?
Try using the reset button between the speaker and the camera and try to turn it on (Search to find pictures about it).
If that doesn't work, keep trying to access download, if that also doesn't work, it's probably hardware related, although that in my opinion would be weird.
Hi,
I have been using Atrix 2 for almost 4 months now and i was very happy with it. I also a got an OTA to ICS. But recently my dialer/phone is not working properly. Whenever i press the dial button for any contact it takes almost 5 to 10 mins to dial that number and during that time even the back button wont work in the dialer/phone. But all other apps seem to work fine. I am unable to make calls properly as it takes too long nearly 10 mins to dial that number. I tried restarting the phone and also uninstalled few apps which i thought might be cause. But nothing seems to fix the problem.
When i do a factory reset then it works fine for almost a day and the same problem repeats again. Details are given below,
Phone: Atrix 2
OS: Andriod 4.0.4
Root: Not Rooted.
Please help me fix this problem.
jnanendrah said:
Hi,
I have been using Atrix 2 for almost 4 months now and i was very happy with it. I also a got an OTA to ICS. But recently my dialer/phone is not working properly. Whenever i press the dial button for any contact it takes almost 5 to 10 mins to dial that number and during that time even the back button wont work in the dialer/phone. But all other apps seem to work fine. I am unable to make calls properly as it takes too long nearly 10 mins to dial that number. I tried restarting the phone and also uninstalled few apps which i thought might be cause. But nothing seems to fix the problem.
When i do a factory reset then it works fine for almost a day and the same problem repeats again. Details are given below,
Phone: Atrix 2
OS: Andriod 4.0.4
Root: Not Rooted.
Please help me fix this problem.
Click to expand...
Click to collapse
Might try booting into recovery and fixing permissions. Are you using any 3rd party dialing or contact apps?
41rw4lk said:
Might try booting into recovery and fixing permissions. Are you using any 3rd party dialing or contact apps?
Click to expand...
Click to collapse
No. I am not using any 3rd party dialer or contact apps.
Could you please let me know how to fix the permissions using recovery as mentioned ?
jnanendrah said:
No. I am not using any 3rd party dialer or contact apps.
Could you please let me know how to fix the permissions using recovery as mentioned ?
Click to expand...
Click to collapse
You're on a completely stock system right? Definitely weird, since you have no root and stock recovery, and factory reset doesn't fix it. Then I would suggest fxz a clean system. You can check the noob guide for more info about how to do it, and which fxz you need.
41rw4lk said:
You're on a completely stock system right? Definitely weird, since you have no root and stock recovery, and factory reset doesn't fix it. Then I would suggest fxz a clean system. You can check the noob guide for more info about how to do it, and which fxz you need.
Click to expand...
Click to collapse
Yes. Actually few days ago i got my ICS rooted and due to some app the phone was stuck at the boot screen and wouldn't start. So i had to flash the stock ROM i.e Android 2.3.6 GB. After that i got a OTA to ICS and after few days of usage i facing this problem. I have not rooted the OS i am currently using.
jnanendrah said:
Yes. Actually few days ago i got my ICS rooted and due to some app the phone was stuck at the boot screen and wouldn't start. So i had to flash the stock ROM i.e Android 2.3.6 GB. After that i got a OTA to ICS and after few days of usage i facing this problem. I have not rooted the OS i am currently using.
Click to expand...
Click to collapse
Ics was too laggy for me too. That made me try out cm10! And now I'm like what's "lag "?
Lifehacker7 said:
Ics was too laggy for me too. That made me try out cm10! And now I'm like what's "lag "?
Click to expand...
Click to collapse
Can you please let me know how to get that? I mean the links and guide on how to install that.
jnanendrah said:
Can you please let me know how to get that? I mean the links and guide on how to install that.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1869692
Flash it in CWM. There are some minor bugs though. I would suggest u manually write down the apns before flashing and add it back once done.
I get these annoying pop up notifications about nfc not working and other stuff and certain apps freeze for a sec then start up again. I have the screen shots that i will attach. I used the new method on this site after i got the stock JB update from VZ OTA.
Also, im a noob even though i got this done using VM and a cracked version of windows xp.
Please help!!!
FingerBlastJ said:
I get these annoying pop up notifications about nfc not working and other stuff and certain apps freeze for a sec then start up again. I have the screen shots that i will attach. I used the new method on this site after i got the stock JB update from VZ OTA.
Also, im a noob even though i got this done using VM and a cracked version of windows xp.
Please help!!!
Click to expand...
Click to collapse
I take it you are running a custom recovery? Boot into it and clear your cache and dalvik cache and then fix permissions. Usually force closes are permission issues. If it doesn't fix it maybe a factory reset? If that don't do anything either then just flash the JB rooted image with odin from here
x714x said:
I take it you are running a custom recovery? Boot into it and clear your cache and dalvik cache and then fix permissions. Usually force closes are permission issues. If it doesn't fix it maybe a factory reset? If that don't do anything either then just flash the JB rooted image with odin from here
Click to expand...
Click to collapse
how long does it normally take to fix permissions? its been doing it for 5 mins and it almost seems frozen and this is my 2nd attempt. i took out the battery and tried again. what should i do now?
FingerBlastJ said:
how long does it normally take to fix permissions? its been doing it for 5 mins and it almost seems frozen and this is my 2nd attempt. i took out the battery and tried again. what should i do now?
Click to expand...
Click to collapse
ok now i have a bigger problem, "unfortunately, touchwiz hom has stopped" flashes every5 secs and i cant even use my phone. what do i do?
FingerBlastJ said:
ok now i have a bigger problem, "unfortunately, touchwiz hom has stopped" flashes every5 secs and i cant even use my phone. what do i do?
Click to expand...
Click to collapse
Download that stock rooted JB image I linked to and flash it with odin. If you don't know how to use odin follow step 5 in this guide. Fixing permissions should only take a couple mins tops on a stock rom so something is probably corrupted and causing issues.
x714x said:
Download that stock rooted JB image I linked to and flash it with odin. If you don't know how to use odin follow step 5 in this guide. Fixing permissions should only take a couple mins tops on a stock rom so something is probably corrupted and causing issues.
Click to expand...
Click to collapse
yea i know how to flash with odin, im gonna try it right now with the non wipe version of the latest JB
FingerBlastJ said:
yea i know how to flash with odin, im gonna try it right now with the non wipe version of the latest JB
Click to expand...
Click to collapse
odin isnt allowing me to flash that image, attached is a screen shot
What does the error say? I can't read it that small.
x714x said:
What does the error say? I can't read it that small.
Click to expand...
Click to collapse
it says vmware-host\shared folders\desktop\root files\root66 file ..... then all these special characters that look like boxes
i tried running a different launcher, and they work a lil better but touchwiz is by far superior but i still get the nfc stopped message and everything is much slower
Ya i dont know what what that refers too either, you have a windows computer you can run it on then inside a VM?
x714x said:
Ya i dont know what what that refers too either, you have a windows computer you can run it on then inside a VM?
Click to expand...
Click to collapse
im using a mac so im forced to use windows xp on VM
FingerBlastJ said:
im using a mac so im forced to use windows xp on VM
Click to expand...
Click to collapse
ok i just did a factory reset and i still have the nfc issue along with the com.android.phone issue and i cant get into the mobile networks, any ideas of what i can do?
this thread here says its an nfc fix i just dont know if it will ruin my nfc capabilities
http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367
please help.
Something is corrupt on the system is my guess. Im thinking your only option is to flash the os again.
x714x said:
Something is corrupt on the system is my guess. Im thinking your only option is to flash the os again.
Click to expand...
Click to collapse
by flashing you mean formatting? why would that do anything when it didnt do much the first time?
Hi one of my friends owns a nexus 7 (2012), the device received a ota update to 4.4 but the update is stuck is the screen saying that the device is finishing boot but is stuck...please help...??
rahuldivesh said:
Hi one of my friends owns a nexus 7 (2012), the device received a ota update to 4.4 but the update is stuck is the screen saying that the device is finishing boot but is stuck...please help...??
Click to expand...
Click to collapse
Normally This doesn't happens with the ota updates,
BTW try removing the battery and then rebooting
Hope this helps
SSKSSK said:
Normally This doesn't happens with the ota updates,
BTW try removing the battery and then rebooting
Hope this helps
Click to expand...
Click to collapse
"Remove the battery"? On a Nexus? WTF?
To the OP - force reboot into recovery and try wiping the cache or factory reset.
Was your friend running a custom ROM or rooted? If so that will be the problem - OTA updates are often a problem on modified devices.
Booting after an update usually takes long time..
Since the new 4.4 has ART runtime, it will take even longer time after the activation..
Try to be more patient....
Sent from my WT19i using XDA Premium 4 mobile app
Rei Zazie said:
Booting after an update usually takes long time..
Since the new 4.4 has ART runtime, it will take even longer time after the activation..
Try to be more patient....
Sent from my WT19i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its been the same for 3 days now
SimonTS said:
"Remove the battery"? On a Nexus? WTF?
To the OP - force reboot into recovery and try wiping the cache or factory reset.
Was your friend running a custom ROM or rooted? If so that will be the problem - OTA updates are often a problem on modified devices.
Click to expand...
Click to collapse
No it was complete stock and unroofed... Thanks by the way?
Hi people I have been using my Nexus 5 for a month now. Loving it! Going stock with Elemental 26 kernel, dalvik
This happens quite random, not often but it is annoying. Camera stops working.. I start it up.. And it just.. Black.. Waiting until it says "camera stopped“ a restart does help, but I have Sometimes missed some shots because of this.
Anyone that have experienced this and have a permanent solution?
Sent from my Nexus 5 using xda app-developers app
UnLucky12 said:
Hi people I have been using my Nexus 5 for a month now. Loving it! Going stock with Elemental 26 kernel, dalvik
This happens quite random, not often but it is annoying. Camera stops working.. I start it up.. And it just.. Black.. Waiting until it says "camera stopped“ a restart does help, but I have Sometimes missed some shots because of this.
Anyone that have experienced this and have a permanent solution?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
To try in order - step by step if the previous didn't solve the problem:
1. Clear app data
2. Flash the stock kernel
3. Factory reset
4. Clean installation
5. RMA...
I had it on my previous device and it was a hardware bug so :fingers-crossed:
Primokorn said:
To try in order - step by step if the previous didn't solve the problem:
1. Clear app data
2. Flash the stock kernel
3. Factory reset
4. Clean installation
5. RMA...
I had it on my previous device and it was a hardware bug so :fingers-crossed:
Click to expand...
Click to collapse
Thanks! Clear app data haven't worked, so will try to flash the stock kernel when I get home. Will get back to this thread if the step doesn't work.
And.. RMA?
UnLucky12 said:
And.. RMA?
Click to expand...
Click to collapse
Send your phone back to Google for repairs.
I've had this issue once while on CM11. A restart fixed it, leading me to believe it's a ROM/Kernel bug, and also hasn't happened on the latest nightly. OP, try a different kernel version.
abtekk said:
I've had this issue once while on CM11. A restart fixed it, leading me to believe it's a ROM/Kernel bug, and also hasn't happened on the latest nightly. OP, try a different kernel version.
Click to expand...
Click to collapse
I am on stock, maybe it is kernel related.. I don't know. Don't want to blame the kernel just yet. But 26 is the latest. Waiting for an update, maybe try another kernel and see if that help, if the problem occurs again.
UnLucky12 said:
I am on stock, maybe it is kernel related.. I don't know. Don't want to blame the kernel just yet. But 26 is the latest. Waiting for an update, maybe try another kernel and see if that help, if the problem occurs again.
Click to expand...
Click to collapse
Flashable zips of stock kernel are available here. You can also fastboot flash the boot.img file from the factory images.