I get these annoying pop up notifications about nfc not working and other stuff and certain apps freeze for a sec then start up again. I have the screen shots that i will attach. I used the new method on this site after i got the stock JB update from VZ OTA.
Also, im a noob even though i got this done using VM and a cracked version of windows xp.
Please help!!!
FingerBlastJ said:
I get these annoying pop up notifications about nfc not working and other stuff and certain apps freeze for a sec then start up again. I have the screen shots that i will attach. I used the new method on this site after i got the stock JB update from VZ OTA.
Also, im a noob even though i got this done using VM and a cracked version of windows xp.
Please help!!!
Click to expand...
Click to collapse
I take it you are running a custom recovery? Boot into it and clear your cache and dalvik cache and then fix permissions. Usually force closes are permission issues. If it doesn't fix it maybe a factory reset? If that don't do anything either then just flash the JB rooted image with odin from here
x714x said:
I take it you are running a custom recovery? Boot into it and clear your cache and dalvik cache and then fix permissions. Usually force closes are permission issues. If it doesn't fix it maybe a factory reset? If that don't do anything either then just flash the JB rooted image with odin from here
Click to expand...
Click to collapse
how long does it normally take to fix permissions? its been doing it for 5 mins and it almost seems frozen and this is my 2nd attempt. i took out the battery and tried again. what should i do now?
FingerBlastJ said:
how long does it normally take to fix permissions? its been doing it for 5 mins and it almost seems frozen and this is my 2nd attempt. i took out the battery and tried again. what should i do now?
Click to expand...
Click to collapse
ok now i have a bigger problem, "unfortunately, touchwiz hom has stopped" flashes every5 secs and i cant even use my phone. what do i do?
FingerBlastJ said:
ok now i have a bigger problem, "unfortunately, touchwiz hom has stopped" flashes every5 secs and i cant even use my phone. what do i do?
Click to expand...
Click to collapse
Download that stock rooted JB image I linked to and flash it with odin. If you don't know how to use odin follow step 5 in this guide. Fixing permissions should only take a couple mins tops on a stock rom so something is probably corrupted and causing issues.
x714x said:
Download that stock rooted JB image I linked to and flash it with odin. If you don't know how to use odin follow step 5 in this guide. Fixing permissions should only take a couple mins tops on a stock rom so something is probably corrupted and causing issues.
Click to expand...
Click to collapse
yea i know how to flash with odin, im gonna try it right now with the non wipe version of the latest JB
FingerBlastJ said:
yea i know how to flash with odin, im gonna try it right now with the non wipe version of the latest JB
Click to expand...
Click to collapse
odin isnt allowing me to flash that image, attached is a screen shot
What does the error say? I can't read it that small.
x714x said:
What does the error say? I can't read it that small.
Click to expand...
Click to collapse
it says vmware-host\shared folders\desktop\root files\root66 file ..... then all these special characters that look like boxes
i tried running a different launcher, and they work a lil better but touchwiz is by far superior but i still get the nfc stopped message and everything is much slower
Ya i dont know what what that refers too either, you have a windows computer you can run it on then inside a VM?
x714x said:
Ya i dont know what what that refers too either, you have a windows computer you can run it on then inside a VM?
Click to expand...
Click to collapse
im using a mac so im forced to use windows xp on VM
FingerBlastJ said:
im using a mac so im forced to use windows xp on VM
Click to expand...
Click to collapse
ok i just did a factory reset and i still have the nfc issue along with the com.android.phone issue and i cant get into the mobile networks, any ideas of what i can do?
this thread here says its an nfc fix i just dont know if it will ruin my nfc capabilities
http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367
please help.
Something is corrupt on the system is my guess. Im thinking your only option is to flash the os again.
x714x said:
Something is corrupt on the system is my guess. Im thinking your only option is to flash the os again.
Click to expand...
Click to collapse
by flashing you mean formatting? why would that do anything when it didnt do much the first time?
Related
Hi,
I have been using Atrix 2 for almost 4 months now and i was very happy with it. I also a got an OTA to ICS. But recently my dialer/phone is not working properly. Whenever i press the dial button for any contact it takes almost 5 to 10 mins to dial that number and during that time even the back button wont work in the dialer/phone. But all other apps seem to work fine. I am unable to make calls properly as it takes too long nearly 10 mins to dial that number. I tried restarting the phone and also uninstalled few apps which i thought might be cause. But nothing seems to fix the problem.
When i do a factory reset then it works fine for almost a day and the same problem repeats again. Details are given below,
Phone: Atrix 2
OS: Andriod 4.0.4
Root: Not Rooted.
Please help me fix this problem.
jnanendrah said:
Hi,
I have been using Atrix 2 for almost 4 months now and i was very happy with it. I also a got an OTA to ICS. But recently my dialer/phone is not working properly. Whenever i press the dial button for any contact it takes almost 5 to 10 mins to dial that number and during that time even the back button wont work in the dialer/phone. But all other apps seem to work fine. I am unable to make calls properly as it takes too long nearly 10 mins to dial that number. I tried restarting the phone and also uninstalled few apps which i thought might be cause. But nothing seems to fix the problem.
When i do a factory reset then it works fine for almost a day and the same problem repeats again. Details are given below,
Phone: Atrix 2
OS: Andriod 4.0.4
Root: Not Rooted.
Please help me fix this problem.
Click to expand...
Click to collapse
Might try booting into recovery and fixing permissions. Are you using any 3rd party dialing or contact apps?
41rw4lk said:
Might try booting into recovery and fixing permissions. Are you using any 3rd party dialing or contact apps?
Click to expand...
Click to collapse
No. I am not using any 3rd party dialer or contact apps.
Could you please let me know how to fix the permissions using recovery as mentioned ?
jnanendrah said:
No. I am not using any 3rd party dialer or contact apps.
Could you please let me know how to fix the permissions using recovery as mentioned ?
Click to expand...
Click to collapse
You're on a completely stock system right? Definitely weird, since you have no root and stock recovery, and factory reset doesn't fix it. Then I would suggest fxz a clean system. You can check the noob guide for more info about how to do it, and which fxz you need.
41rw4lk said:
You're on a completely stock system right? Definitely weird, since you have no root and stock recovery, and factory reset doesn't fix it. Then I would suggest fxz a clean system. You can check the noob guide for more info about how to do it, and which fxz you need.
Click to expand...
Click to collapse
Yes. Actually few days ago i got my ICS rooted and due to some app the phone was stuck at the boot screen and wouldn't start. So i had to flash the stock ROM i.e Android 2.3.6 GB. After that i got a OTA to ICS and after few days of usage i facing this problem. I have not rooted the OS i am currently using.
jnanendrah said:
Yes. Actually few days ago i got my ICS rooted and due to some app the phone was stuck at the boot screen and wouldn't start. So i had to flash the stock ROM i.e Android 2.3.6 GB. After that i got a OTA to ICS and after few days of usage i facing this problem. I have not rooted the OS i am currently using.
Click to expand...
Click to collapse
Ics was too laggy for me too. That made me try out cm10! And now I'm like what's "lag "?
Lifehacker7 said:
Ics was too laggy for me too. That made me try out cm10! And now I'm like what's "lag "?
Click to expand...
Click to collapse
Can you please let me know how to get that? I mean the links and guide on how to install that.
jnanendrah said:
Can you please let me know how to get that? I mean the links and guide on how to install that.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1869692
Flash it in CWM. There are some minor bugs though. I would suggest u manually write down the apns before flashing and add it back once done.
Ok so it is like this:
I bought my galaxy r here in sweden 1 year and 3 months ago, it was working perfectly for around 1 year.
At the one year mark i started to have some problems with the touchscreen where the phone would feel a pressure in the middle of the screen, to get rid of this i simply locked and unlocked the phone or rubbed a bit with a cloth on the screen.
Recently when I saw there was a cm10.1 rom with nightlies I rooted my phone and later installed the cm10.1 rom. Now the most anoying thing. I have a problem with my battery where the phone just shuts down randomly (mostly when playing games) even though it sometimes have up too 80% battery remaining. Then when I restart the phone it usually have 0% battery left and therefore shuts itself down again, sometimes it restarts with just a 20-30% batteryloss. This have occured more often recently and it shuts itself of 3-4 times a day. I can't remember if it was like this when i was on stock, before I started to flash and root, but i think it was.
A few days ago i flashed stock ics from odin and I confirmed that both of these problems still were there, so i have hard to belive that it is the modding of the software that have caused this.
Do you guys have any suggestions to how i can be able to use my phone normally again?
Im just a poor student so i don't want to waste money on a new phone after just 1 year :/
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Will this help with the battery?
kataria.vikesh said:
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Will this help the crashing/battery?
DippN said:
Will this help the crashing/battery?
Click to expand...
Click to collapse
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
kataria.vikesh said:
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
Click to expand...
Click to collapse
Nope, im not takeing backup of anything.
And one other thing i forgot to mention earlier, the phone now also thinks it is charging itself evrn when it is not. It think the usb cable is still connected.
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
DippN said:
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
Click to expand...
Click to collapse
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Both of you install CM10.1 using Procedure no 2 from OP.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Will try that when i get home, thx.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
paKS7 said:
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
Click to expand...
Click to collapse
Sadly, I can confirm that this did not change anything.
The problems are still there :/
DippN said:
Sadly, I can confirm that this did not change anything.
The problems are still there :/
Click to expand...
Click to collapse
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
DippN said:
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
Click to expand...
Click to collapse
May be hardware or software too..when you will vanish all data & cache then Software issue may be gone but if problem still persist, means you have hardware problem.
Also, root will be lost after flashing Stock ROM from ODIN.
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
paKS7 said:
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
Click to expand...
Click to collapse
Well, we are not on the same baseband. I'm on I9103XXLQ3.
About the cm verison im not quiet sure, the latest i flashed was "20130406" but since the problem were there the time before that when i flashed cm I cant answer exacly but i have a cm version "20130305" on my desktop and it could be that one that I used.
I never used cm before it was on nightlies so the modem file flashing i dont know anything about.
The thing you mention about that it shuts of when the phone gets busy and touchscreen gets unresponsive I can kind of confirm too.
I will flash GB now, will report back in an hour how it went.
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
DippN said:
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
Click to expand...
Click to collapse
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
DippN said:
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
Click to expand...
Click to collapse
Wipe data again.. If possible after wiping data Just reflash the GB.
Okay here's the deal, in setup the phone wont activate, when I set it up with wifi basically nothing works and is generally glitchy. Ex: if the screen suspends the phone will shortly turn off, apps freeze randomly I could be on an app for 15 minutes and it doesnt freeze other times I will be on it for 10 seconds and it will freeze.
I have used odin many times to try and fix this, I tried oc3 and oe2. I even tried to use flashfire to wipe and install but to no avail it simply just restarts when I try to flash. If anyone has any fixes or just a general idea with whats going on I can fix it be specfic as possible I've worked with android devices for many years.
Sidenote: this happened when I soft bricked my phone and then flashed the stock rom
Fourtuber said:
Okay here's the deal, in setup the phone wont activate, when I set it up with wifi basically nothing works and is generally glitchy. Ex: if the screen suspends the phone will shortly turn off, apps freeze randomly I could be on an app for 15 minutes and it doesnt freeze other times I will be on it for 10 seconds and it will freeze.
I have used odin many times to try and fix this, I tried oc3 and oe2. I even tried to use flashfire to wipe and install but to no avail it simply just restarts when I try to flash. If anyone has any fixes or just a general idea with whats going on I can fix it be specfic as possible I've worked with android devices for many years.
Sidenote: this happened when I soft bricked my phone and then flashed the stock rom
Click to expand...
Click to collapse
Have tried starting over by flashing a full wipe tar file? Not the ones that have "home" in the name.
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676
Tulsadiver said:
Have tried starting over by flashing a full wipe tar file? Not the ones that have "home" in the name.
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676
Click to expand...
Click to collapse
Yes I have used the full wipe rom over and over
Tulsadiver said:
Have tried starting over by flashing a full wipe tar file? Not the ones that have "home" in the name.
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676
Click to expand...
Click to collapse
any ideas?
Not at the moment. You sure would think a full wipe tar would solve something like this.
So your problem is not just wifi? Apps and phone glitchy on data too.
Sent from my SM-G920V using Tapatalk
Tulsadiver said:
Not at the moment. You sure would think a full wipe tar would solve something like this.
So your problem is not just wifi? Apps and phone glitchy on data too.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Yeah everything seems to not work properly, it's a hug pain for me.
Tulsadiver said:
Not at the moment. You sure would think a full wipe tar would solve something like this.
So your problem is not just wifi? Apps and phone glitchy on data too.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Im going to re-download the full wipe tar and get back with you
Tulsadiver said:
Not at the moment. You sure would think a full wipe tar would solve something like this.
So your problem is not just wifi? Apps and phone glitchy on data too.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
Still no luck, have any ideas at all
Fourtuber said:
Still no luck, have any ideas at all
Click to expand...
Click to collapse
Clueless. I'm sure you tried a factory reset. I'll keep searching and thinking on it.
Tulsadiver said:
Clueless. I'm sure you tried a factory reset. I'll keep searching and thinking on it.
Click to expand...
Click to collapse
Thank you for the help, I think for some odd reason it's because the verizon servers are having issues so without activation my phone is hating it.
If you've used odin and flashed an oridinal rom and still have all these issues maybe your phone is defective. I would flash original via Odin and return. The problems your experiencing are way out of line with a clean Odin Flash. Its not Verizon as many, including mine have none of the problems you mentioned.
Sent from my SM-G920V using XDA Free mobile app
I am helping a friend to get his One Plus One 64GB to work again after an OTA update broke it.
Initial Problem
Two days ago she started an OTA update which made the phone reboot constantly before even android started. Basically it showed the logo for about 6s then vibrated and restarted again. I later found /o/Android/data/com.cyngn.fota/cache/cm-12.0-YNG1TAS17L-bacon-signed.zip so I assume that this was what was installed.
The phone is completely untouched otherwise. She has no computer knowledge whatsoever and says she didn't give it to anyone.
My attempt
I was able to install cm-11.0-XNPH33R-bacon-signed.zip and cm-11.0-XNPH22R-bacon-signed.zip via sideloading. The phone started ok but was crashing all the time. I am not able to get into settings to activate developer settings (adb) because the crash notifications hinder navigation and after about 10s the whole gui crashes and I see the black screen with the hexagon loading logo. The latter firmware is worse meaning it crashes at a higher frequency.
The Problem
She didn't expect any problems and does not have a backup of her data. Thus I can't do a factory reset or use fastboot.
Question
Did I use the wrong ROM? There seem to be many variants. I haven't found any information which explains the differences.
Could I maybe flash a minimal ROM that would not crash to backup the data and than do a factory reset?
Is there any way to activate adb access without having to navigate to settings?
I've experienced your issues as well when helping another friend out, try using a newer version of cm11s, something like 44S /44R (i dont remember what it is) or 05Q, those should not have the issue and everything should work fine
Jst flash a newer modem in recovery
mugoftee said:
I am helping a friend to get his One Plus One 64GB to work again after an OTA update broke it.
Initial Problem
Two days ago she started an OTA update which made the phone reboot constantly before even android started. Basically it showed the logo for about 6s then vibrated and restarted again. I later found /o/Android/data/com.cyngn.fota/cache/cm-12.0-YNG1TAS17L-bacon-signed.zip so I assume that this was what was installed.
The phone is completely untouched otherwise. She has no computer knowledge whatsoever and says she didn't give it to anyone.
My attempt
I was able to install cm-11.0-XNPH33R-bacon-signed.zip and cm-11.0-XNPH22R-bacon-signed.zip via sideloading. The phone started ok but was crashing all the time. I am not able to get into settings to activate developer settings (adb) because the crash notifications hinder navigation and after about 10s the whole gui crashes and I see the black screen with the hexagon loading logo. The latter firmware is worse meaning it crashes at a higher frequency.
The Problem
She didn't expect any problems and does not have a backup of her data. Thus I can't do a factory reset or use fastboot.
Question
Did I use the wrong ROM? There seem to be many variants. I haven't found any information which explains the differences.
Could I maybe flash a minimal ROM that would not crash to backup the data and than do a factory reset?
Is there any way to activate adb access without having to navigate to settings?
Click to expand...
Click to collapse
The problem here is that you flashed an older build, going backwards like that is what's causing the crashes. Grab the latest build from here:
https://www.androidfilehost.com/?fid=24052804347802356
Flash that and hopefully you'll be ok.
PivotMasterNM said:
I've experienced your issues as well when helping another friend out, try using a newer version of cm11s, something like 44S /44R (i dont remember what it is) or 05Q, those should not have the issue and everything should work fine
Click to expand...
Click to collapse
That won't help, flashing an older build than what was previously installed without wiping properly will cause problems.
KURDKiNG said:
Jst flash a newer modem in recovery
Click to expand...
Click to collapse
Modem has nothing to do with this.
Well mines did like it was at lockscreen and wen i tried to unlock it rebooted so i jst flash a modem and booted fine
KURDKiNG said:
Well mines did like it was at lockscreen and wen i tried to unlock it rebooted so i jst flash a modem and booted fine
Click to expand...
Click to collapse
Most likely pure coincidence.
Thanks your reply!
Heisenberg said:
The problem here is that you flashed an older build, going backwards like that is what's causing the crashes. Grab the latest build from here:
https://www.androidfilehost.com/?fid=24052804347802356
Flash that and hopefully you'll be ok.
Click to expand...
Click to collapse
Actually this is what I did in the very first beginning but I encountered the same rebooting symptoms like after the OTA update. Since it didn't seem to change anything I didn't mention it. I used cm-12.1-YOG4PAS1N0-bacon-signed.
Any other ideas? I am about to unlock it with fastboot but really would prefer not to delete all user data.
mugoftee said:
Any other ideas? I am about to unlock it with fastboot but really would prefer not to delete all user data.
Click to expand...
Click to collapse
I don't think you have any other option unfortunately.
The problem appeared after upgrade to nougat. I tried factory reset, it was ok for the first hours and now, the problem returned.
Anyone facing the same problems?
Phone not rooted, running on official rom and problems occurs even in safe mode....
alexpen said:
The problem appeared after upgrade to nougat. I tried factory reset, it was ok for the first hours and now, the problem returned.
Anyone facing the same problems?
Phone not rooted, running on official rom and problems occurs even in safe mode....
Click to expand...
Click to collapse
Hi
How did you upgrade?
OTA , flashing??
If OTA did you upgrade al your apps , maybe one of them is making trouble
If flashing , how? and also did you upgrade your apps
Hey, thanks for the answer. It was OTA. I suppose all apps are up to date since I restored to factory settings and re-installed them.
The problem is still there even in safe mode...
alexpen said:
Hey, thanks for the answer. It was OTA. I suppose all apps are up to date since I restored to factory settings and re-installed them.
The problem is still there even in safe mode...
Click to expand...
Click to collapse
Hi
yeah is odd , i would think it has to be app related .....
When you get the error ..after you introduce the password? what about if you ask your phone to forget your old connection , it allows you to connect to the new one then?
I would try to wipe dalvik and cache from recovery and /or reflash stock rom again..maybe something went wrong at least the modem
MAX 404 said:
Hi
yeah is odd , i would think it has to be app related .....
When you get the error ..after you introduce the password? what about if you ask your phone to forget your old connection , it allows you to connect to the new one then?
I would try to wipe dalvik and cache from recovery and /or reflash stock rom again..maybe something went wrong at least the modem
Click to expand...
Click to collapse
It happens right after when I tap on the network I want to get connected to...
alexpen said:
It happens right after when I tap on the network I want to get connected to...
Click to expand...
Click to collapse
Did you try the other suggestions I mention?
MAX 404 said:
Did you try the other suggestions I mention?
Click to expand...
Click to collapse
I tried to wipe the cache with no success. I am on a trip right now, and I cannot wipe the dalvik for the moment.
I figured out a walkthrough though using a third party app called "WIFI manager". I even managed to install a certificate and use it for a connection to an "eduroam" network...