Related
My Atrix 2 is a 2.3.5 firmware version. ATT 110921_0913
From previous 2 to 3 days my phone is in complete freeze mode...meaning whatever I do to my phone install any app uninstall any app...when I restart the phone it just gets back to the same state....
I have tried factory reset from the settings I didn't worked..... then I tried the hard reset method but that didn't worked too...
After that I tries reloading the stock fxz using the rsd lite but it failed at step 3 saying mbmloader cannot be flashed....
Then I tried the script method...http://forum.xda-developers.com/showthread.php?t=1539167
In that it said that the bootloader is restricted and it cannot write it it wrote the rest of the things but still my phone is in the same state it was with same apps and everything.....
I tried booting into the CWM recovery mode but when I try to run the AtrixBOOtloader.apk it reboots and the restarts normally....
Please I really need som help....
just to let you know I have Go launcher installed I know its absurd to thing that it can be causing the problem...but just in casee....
Please let me know if you need any other information.....
Any help will be greatly appreciated....
Thanks....
More info is always nice:
Are you rooted? Were you running a special ROM? If rooted, did you make any changes to your system? If rooted, do you have a backup made (cause you should)? What did you do (system wise) before this started?
And are you SURE you are 2.3.5? Because all A2's are 2.3.5 out of the box but have since been upgraded to 2.3.6, which is the stock norm for A2's.
PS: From now on please post things like this in the Q&A forum. We're kinda letting this slide so far since it's still new and not everyone is aware of it.
Fall of Enosis said:
More info is always nice:
Are you rooted? Were you running a special ROM? If rooted, did you make any changes to your system? If rooted, do you have a backup made (cause you should)? What did you do (system wise) before this started?
And are you SURE you are 2.3.5? Because all A2's are 2.3.5 out of the box but have since been upgraded to 2.3.6, which is the stock norm for A2's.
PS: From now on please post things like this in the Q&A forum. We're kinda letting this slide so far since it's still new and not everyone is aware of it.
Click to expand...
Click to collapse
Hi,
Thanks for your reply.
Here are the answers:
Are you rooted? Yes!
Were you running a special ROM? No I did nothing that could mess up my rom or anything...
If rooted, did you make any changes to your system? If rooted, do you have a backup made (cause you should)? What did you do (system wise) before this started? No to above all...this started happening 2-3 days ago after some of my apps were updated...and I dont have any backup
And are you SURE you are 2.3.5? Because all A2's are 2.3.5 out of the box but have since been upgraded to 2.3.6, which is the stock norm for A2's........
I am sure that I am at 2.3.5 because I was not able to install the 2.3.6 update I kept on failing on me while installing on halfway.....
Again I have not done anything related to my system that I could cause this...only thing I can think of is because of some rogue app or something!!!!
Ok now that we have the basics down, one other question, what EXACTLY do you mean by "freeze mode"? What exactly is the phone doing that you don't want it to do? Force closing all the time? If so, what apps?
I'm still a little confused as to what EXACTLY the phone is doing.
The more info the better.
I agree with you Fall of Enosis, we need some more exacted information regarding the OP's issue here.
OP: You say you tried a factory reset, but now are concerned that it is a "rogue app", but unless you've re-installed apps you previously had installed, this is not likely.
What is your location, and do you have access to WiFi or network connectivity to enable the update from 2.3.5 to 2.3.6?
Sounds to me as if you have tried to do something that we're not entirely clear of (and perhaps you are not either) and as result you've borked the boot image, but I can't convincingly determine that is the case here. If the phone is still booting into Android, but simply "freezes", then you may have a bad flash of the FXZ.
If you are experiencing "freezing" of the UI or system itself, it could be application-related or a handful of other things.
You really need to be as precise as you possibly can, describing in detail everything you have done, tried, and are experiencing here for us to be of any real help. Otherwise, we're left to 'fishing' for information from you, which wastes everyone's time here.
Fall of Enosis said:
Ok now that we have the basics down, one other question, what EXACTLY do you mean by "freeze mode"? What exactly is the phone doing that you don't want it to do? Force closing all the time? If so, what apps?
I'm still a little confused as to what EXACTLY the phone is doing.
The more info the better.
Click to expand...
Click to collapse
Yes all of my apps are force closing like motorola.service.....facebook rebtel and many others...sometimes one crashes on other restart some other.....
NOTHING IS ACTUALLY FREEZING
By freeze mode I mean like the deep freeze effect on the PC...I cannot uninstall any app or install a new one cannot make any changes ot my system settings or anything......
So sometimes critical processes closes like contacts process and then no contacts are shown.....I am able to use the phone and the apps which are not closing for that time works prefectly fine....
Apex_Strider said:
I agree with you Fall of Enosis, we need some more exacted information regarding the OP's issue here.
OP: You say you tried a factory reset, but now are concerned that it is a "rogue app", but unless you've re-installed apps you previously had installed, this is not likely.
What is your location, and do you have access to WiFi or network connectivity to enable the update from 2.3.5 to 2.3.6?
Sounds to me as if you have tried to do something that we're not entirely clear of (and perhaps you are not either) and as result you've borked the boot image, but I can't convincingly determine that is the case here. If the phone is still booting into Android, but simply "freezes", then you may have a bad flash of the FXZ.
If you are experiencing "freezing" of the UI or system itself, it could be application-related or a handful of other things.
You really need to be as precise as you possibly can, describing in detail everything you have done, tried, and are experiencing here for us to be of any real help. Otherwise, we're left to 'fishing' for information from you, which wastes everyone's time here.
Click to expand...
Click to collapse
I am really sorry for not being much more clearer with my problem.....!!
I am currently in US LA and yes I do have wifi connectivity I have tried update several times but I just fails...I think may be I rooted it incorrectly....
I HAVE NOT TRIED TO DO ANYTHING WITH MY SYSTEM
The phone still boots up normally and works fine I mean nothing is freezing ....by freeze mode I mean the whole of the phone memory is frozen like deep freeze on the PC so I cannot make any changes to the settings or install uninstall any apps....moreover on each restart many of the processes keeps on closing...
So agian I will try to make it as clearer as possible.....I have not tried to install any custom rom or make any os or system related changes to my atrix 2....
What is actually happening is I cannot make any changes to my phone memory....I cannot change any settings or install or uninstall anything since as soon as I restart my phone ANY CHANGES WILL DISAPPEAR and it will be back to the exact same state as it was before.....
Please help I am not able to fix this thing....
Ok, thanks for being clearer. It helps.
I have had something like this happen to me, constant moto apps fc'ing.
For me it was an app causing my headache. However the only way i could take care of it was to restore one of my backups.
I think you possibly have an app causing your headache as well. And i think that somehow (whether you know it or not) you accidentally borked the system UI. So before we go to the extreme of fxz'ing back (since you don't have a backup) what kind of rooted apps are you using?
I know YOU didn't personally change anything but rooted apps will make all sorts of changes that you are unaware of.
What rooted apps are you running and more importantly which apps (rooted or not) were most recently installed before this happened?
Don't fret man, we'll work this out for ya.
Sent from my MB865 using xda premium
Maybe.. the flash memory cannot be written?
Is it possible to post "adb logcat" when your apps are force closing or you are trying to do an install? And if you could make adb work, then grab a shell and paste the o/p of the commands "mount", "df" ... Also you may want to try command like "adb install <package.apk>", and check what's the error code returned.
Fall of Enosis said:
Ok, thanks for being clearer. It helps.
I have had something like this happen to me, constant moto apps fc'ing.
For me it was an app causing my headache. However the only way i could take care of it was to restore one of my backups.
I think you possibly have an app causing your headache as well. And i think that somehow (whether you know it or not) you accidentally borked the system UI. So before we go to the extreme of fxz'ing back (since you don't have a backup) what kind of rooted apps are you using?
I know YOU didn't personally change anything but rooted apps will make all sorts of changes that you are unaware of.
What rooted apps are you running and more importantly which apps (rooted or not) were most recently installed before this happened?
Don't fret man, we'll work this out for ya.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Okay, so I have been playing with the phone form last two days and I have figured out what the problem is...ITS A ROGUE APP...HOW??!!!!
Well, I started my phone in safe mode and I was out of the WIFI reach so no network access then to my surprise everything worked fine like a charm no process was closing and the phone was perfectly fine as it should but as soon as I went into wifi connectivity around 12 of my apps got automatic updates and my phone started f*king again.....
As soon as the updates were installed all my apps started force closing and it was absolutely like a what a virus does on the PC my apps were starting trying to load and then were kill in about 3-4 seconds......
So, it has to be a rogue app nothing else.....I am not sure which app is causing the problem and I don't even remember which app I recently installed but it has to be one of the app which is getting updated...right??
Just for reference these many apps gets the update after which my phone starts messing up....
Line Runner
Words with friends
Foursquare
Facebook
3D Matrix Vol.2 (its a live wallpaper)
TuneIn Radio
Skype
GO Keyboard
Nexus Pro Live wallpaper
GO Locker
(this only these got updated....it can the live wallpaper app I ma not sure)
So, now we know what the problem is...what am I supposed to do now...I have tried uninstalling my apps in the safe mode also but as usuale after the restart I gets back to the same exact state it was.....
Any suggestions will be really helpful....
Also what I am wondreing about is if the app has somehow restricted the mbmbootloader writing isn't there any other way we can write it or change the permission...??
Also thanks for staying with me on this till now
PhoenixNghi said:
Maybe.. the flash memory cannot be written?
Click to expand...
Click to collapse
Are you referring to mbmloader.bin???
black_panther10 said:
Okay, so I have been playing with the phone form last two days and I have figured out what the problem is...ITS A ROGUE APP...HOW??!!!!
Well, I started my phone in safe mode and I was out of the WIFI reach so no network access then to my surprise everything worked fine like a charm no process was closing and the phone was perfectly fine as it should but as soon as I went into wifi connectivity around 12 of my apps got automatic updates and my phone started f*king again.....
As soon as the updates were installed all my apps started force closing and it was absolutely like a what a virus does on the PC my apps were starting trying to load and then were kill in about 3-4 seconds......
So, it has to be a rogue app nothing else.....I am not sure which app is causing the problem and I don't even remember which app I recently installed but it has to be one of the app which is getting updated...right??
Just for reference these many apps gets the update after which my phone starts messing up....
Line Runner
Words with friends
Foursquare
Facebook
3D Matrix Vol.2 (its a live wallpaper)
TuneIn Radio
Skype
GO Keyboard
Nexus Pro Live wallpaper
GO Locker
(this only these got updated....it can the live wallpaper app I ma not sure)
So, now we know what the problem is...what am I supposed to do now...I have tried uninstalling my apps in the safe mode also but as usuale after the restart I gets back to the same exact state it was.....
Any suggestions will be really helpful....
Also what I am wondreing about is if the app has somehow restricted the mbmbootloader writing isn't there any other way we can write it or change the permission...??
Also thanks for staying with me on this till now
Click to expand...
Click to collapse
Ok, I am going weigh in here now....
All of this has absolutley NOTHING to do with the Bootloader/mbmloader, not sure where that came from.
My advice is disable all the updates in the playstore, or well the auto update feature, then those apps that you mentioned that are getting updated. After you restore the fxz, this time make sure that the auto update is off, and then update each of the noted problem apps ONE AT A TIME, then when the issue starts you know which one is the problem app, most likely the last app installed or updated, and I would not install that one again. Simple solution here.
Yes this will be painful, because you might have to do the fxz more than once, but it is the best way to know you are back to 100% stock again.
kousik said:
Is it possible to post "adb logcat" when your apps are force closing or you are trying to do an install? And if you could make adb work, then grab a shell and paste the o/p of the commands "mount", "df" ... Also you may want to try command like "adb install <package.apk>", and check what's the error code returned.
Click to expand...
Click to collapse
Okay here I was doing adb logcat and when I tried play music it got killed and this was the adb logcat output
09-03 11:56:33.054 1362 1362 D dalvikvm: GC_EXPLICIT freed <1K, 48% free 2839K
/5379K, external 2357K/2773K, paused 52ms
09-03 11:56:35.750 521 538 W ActivityManager: Activity destroy timeout for H
istoryRecord{406001e0 com.google.android.music/com.android.music.activitymanagem
ent.TopLevelActivity}
09-03 11:56:38.070 1414 1414 D dalvikvm: GC_EXPLICIT freed 6K, 47% free 2892K/
5447K, external 2357K/2773K, paused 69ms
09-03 11:56:42.710 521 605 V AlarmManager: sending alarm Alarm{40b32c60 type
2 android}
09-03 11:56:42.726 4335 4471 I Gmail : MainSyncRequestProto: lowestBkwdConvo
Id: 0, highestHandledServerOp: 924491, normalSync: true
Let me know if you can make any sense out of it.....
And I am able to install and uninstall apps it is not like I wont be allowed to install them its like when I restart all the changes that I make are lost system setting any apps the I installed/uninstalled.....??
Is there anything else you want me to do??
jimbridgman said:
Ok, I am going weigh in here now....
All of this has absolutley NOTHING to do with the Bootloader/mbmloader, not sure where that came from.
My advice is disable all the updates in the playstore, or well the auto update feature, then those apps that you mentioned that are getting updated. After you restore the fxz, this time make sure that the auto update is off, and then update each of the noted problem apps ONE AT A TIME, then when the issue starts you know which one is the problem app, most likely the last app installed or updated, and I would not install that one again. Simple solution here.
Yes this will be painful, because you might have to do the fxz more than once, but it is the best way to know you are back to 100% stock again.
Click to expand...
Click to collapse
But, I am not able to an fxz completely thats what I said...when I try to do fxz back to stock while trying with rsd lite it failed at step 3 saying cannot write mbmloader
then I tried the script method and it said that mbmloader is restricted and it cannot write to it and it did rest of e things which were in the script.....so not matter how many times I fxz it when I start my phone it just gets back to where I left it...??
All I want is that I can just flush everything my phone nad get it back to as it was new....no apps nothing...
black_panther10 said:
But, I am not able to an fxz completely thats what I said...when I try to do fxz back to stock while trying with rsd lite it failed at step 3 saying cannot write mbmloader
then I tried the script method and it said that mbmloader is restricted and it cannot write to it and it did rest of e things which were in the script.....so not matter how many times I fxz it when I start my phone it just gets back to where I left it...??
All I want is that I can just flush everything my phone nad get it back to as it was new....no apps nothing...
Click to expand...
Click to collapse
You have a corrupt install, since it did not flash the correct BL, and most likely other files from the fxz. Your issue is that being in that state will make your phone completely unstable as it is. You are most likely partly on 2.3.5 and 2.3.6 at this point.
Did you EVER install the ICS leak?
Did you apply the corerct fxz patch? which version of firmware are you on, and where do you live (what country), and are you using an AT&T phone outside the US?
If you can answer all of that, I am sure I can get you all fixed with a good fxz.
jimbridgman said:
You have a corrupt install, since it did not flash the correct BL, and most likely other files from the fxz. You issue is that being in that state will make your phone completely unstable as it is. You are most likely partly on 2.3.5 and 2.3.6 at this point.
Did you EVER install the ICS leak?
Did you apply the corerct fxz patch? which version of firmware are you on, and where do you live (what country), and are you using an AT&T phone outside the US?
If you can answer all of that, I am sure I can get you all fixed with a good fxz.
Click to expand...
Click to collapse
Did you EVER install the ICS leak? No I never tried the ICS leak!!
Did you apply the corerct fxz patch? which version of firmware are you on, and where do you live (what country), and are you using an AT&T phone outside the US? Yeah I applied the correcty fxz patch.....I am currently on 2.3.5 and I used the 2.3.5 fxz patch only......I purchased my atrix 2 from LA and I am using the phone in LA only
Well to your doubt that I can be partially on 2.3.5 and 2.3.6 .....well that is somehow possible since when the 2.3.6 update came out I tried to install it but it always failed in the halfway...but that never seemed to cause the problem...I tried that a couple of times when the update came out and then I gave up on it ....I thought it may be because I rooted my phone incorrectly.....but still my phone was working perfectly fine after that....
black_panther10 said:
Did you EVER install the ICS leak? No I never tried the ICS leak!!
Did you apply the corerct fxz patch? which version of firmware are you on, and where do you live (what country), and are you using an AT&T phone outside the US? Yeah I applied the correcty fxz patch.....I am currently on 2.3.5 and I used the 2.3.5 fxz patch only......I purchased my atrix 2 from LA and I am using the phone in LA only
Well to your doubt that I can be partially on 2.3.5 and 2.3.6 .....well that is somehow possible since when the 2.3.6 update came out I tried to install it but it always failed in the halfway...but that never seemed to cause the problem...I tried that a couple of times when the update came out and then I gave up on it ....I thought it may be because I rooted my phone incorrectly.....but still my phone was working perfectly fine after that....
Click to expand...
Click to collapse
Ok, now you still did not answer the exact firmware version your on... please do this:
Settings --> About phone, now give me the long string of numbers and letters under the following things:
System Version:
Android Version:
Kernel Version:
Build number:
Once I have all of those, I will know how to patch the fxz for you. If you are truely on 2.3.5 there would be no need at all for any fxz patching by the way, that only applies if the 2.3.6 OTA actually took.
jimbridgman said:
Ok, now you still did not answer the exact firmware version your on... please do this:
Settings --> About phone, now give me the long string of numbers and letters under the following things:
System Version: 55.11.16.MB865.ATT.en.US
Android Version:2.3.5
Kernel Version: 2011-09-21 09:42 off.Bld LUD_EDISON_RLD7_PATCH_27_110921_0913
Build number:5.5.1-175 EDEFW1-16
Once I have all of those, I will know how to patch the fxz for you. If you are truely on 2.3.5 there would be no need at all for any fxz patching by the way, that only applies if the 2.3.6 OTA actually took.
Click to expand...
Click to collapse
I have used the exact same version of fxz as the kernel version.....
black_panther10 said:
Line Runner
Words with friends
Foursquare
Facebook
3D Matrix Vol.2 (its a live wallpaper)
TuneIn Radio
Skype
GO Keyboard
Nexus Pro Live wallpaper
GO Locker
(this only these got updated....it can the live wallpaper app I ma not sure)
Click to expand...
Click to collapse
Once you uninstall these apps, is everything fine? And if so, uninstall them all, and update them ONE at a time to see which one is borking everything.
I get these annoying pop up notifications about nfc not working and other stuff and certain apps freeze for a sec then start up again. I have the screen shots that i will attach. I used the new method on this site after i got the stock JB update from VZ OTA.
Also, im a noob even though i got this done using VM and a cracked version of windows xp.
Please help!!!
FingerBlastJ said:
I get these annoying pop up notifications about nfc not working and other stuff and certain apps freeze for a sec then start up again. I have the screen shots that i will attach. I used the new method on this site after i got the stock JB update from VZ OTA.
Also, im a noob even though i got this done using VM and a cracked version of windows xp.
Please help!!!
Click to expand...
Click to collapse
I take it you are running a custom recovery? Boot into it and clear your cache and dalvik cache and then fix permissions. Usually force closes are permission issues. If it doesn't fix it maybe a factory reset? If that don't do anything either then just flash the JB rooted image with odin from here
x714x said:
I take it you are running a custom recovery? Boot into it and clear your cache and dalvik cache and then fix permissions. Usually force closes are permission issues. If it doesn't fix it maybe a factory reset? If that don't do anything either then just flash the JB rooted image with odin from here
Click to expand...
Click to collapse
how long does it normally take to fix permissions? its been doing it for 5 mins and it almost seems frozen and this is my 2nd attempt. i took out the battery and tried again. what should i do now?
FingerBlastJ said:
how long does it normally take to fix permissions? its been doing it for 5 mins and it almost seems frozen and this is my 2nd attempt. i took out the battery and tried again. what should i do now?
Click to expand...
Click to collapse
ok now i have a bigger problem, "unfortunately, touchwiz hom has stopped" flashes every5 secs and i cant even use my phone. what do i do?
FingerBlastJ said:
ok now i have a bigger problem, "unfortunately, touchwiz hom has stopped" flashes every5 secs and i cant even use my phone. what do i do?
Click to expand...
Click to collapse
Download that stock rooted JB image I linked to and flash it with odin. If you don't know how to use odin follow step 5 in this guide. Fixing permissions should only take a couple mins tops on a stock rom so something is probably corrupted and causing issues.
x714x said:
Download that stock rooted JB image I linked to and flash it with odin. If you don't know how to use odin follow step 5 in this guide. Fixing permissions should only take a couple mins tops on a stock rom so something is probably corrupted and causing issues.
Click to expand...
Click to collapse
yea i know how to flash with odin, im gonna try it right now with the non wipe version of the latest JB
FingerBlastJ said:
yea i know how to flash with odin, im gonna try it right now with the non wipe version of the latest JB
Click to expand...
Click to collapse
odin isnt allowing me to flash that image, attached is a screen shot
What does the error say? I can't read it that small.
x714x said:
What does the error say? I can't read it that small.
Click to expand...
Click to collapse
it says vmware-host\shared folders\desktop\root files\root66 file ..... then all these special characters that look like boxes
i tried running a different launcher, and they work a lil better but touchwiz is by far superior but i still get the nfc stopped message and everything is much slower
Ya i dont know what what that refers too either, you have a windows computer you can run it on then inside a VM?
x714x said:
Ya i dont know what what that refers too either, you have a windows computer you can run it on then inside a VM?
Click to expand...
Click to collapse
im using a mac so im forced to use windows xp on VM
FingerBlastJ said:
im using a mac so im forced to use windows xp on VM
Click to expand...
Click to collapse
ok i just did a factory reset and i still have the nfc issue along with the com.android.phone issue and i cant get into the mobile networks, any ideas of what i can do?
this thread here says its an nfc fix i just dont know if it will ruin my nfc capabilities
http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367
please help.
Something is corrupt on the system is my guess. Im thinking your only option is to flash the os again.
x714x said:
Something is corrupt on the system is my guess. Im thinking your only option is to flash the os again.
Click to expand...
Click to collapse
by flashing you mean formatting? why would that do anything when it didnt do much the first time?
Ok so it is like this:
I bought my galaxy r here in sweden 1 year and 3 months ago, it was working perfectly for around 1 year.
At the one year mark i started to have some problems with the touchscreen where the phone would feel a pressure in the middle of the screen, to get rid of this i simply locked and unlocked the phone or rubbed a bit with a cloth on the screen.
Recently when I saw there was a cm10.1 rom with nightlies I rooted my phone and later installed the cm10.1 rom. Now the most anoying thing. I have a problem with my battery where the phone just shuts down randomly (mostly when playing games) even though it sometimes have up too 80% battery remaining. Then when I restart the phone it usually have 0% battery left and therefore shuts itself down again, sometimes it restarts with just a 20-30% batteryloss. This have occured more often recently and it shuts itself of 3-4 times a day. I can't remember if it was like this when i was on stock, before I started to flash and root, but i think it was.
A few days ago i flashed stock ics from odin and I confirmed that both of these problems still were there, so i have hard to belive that it is the modding of the software that have caused this.
Do you guys have any suggestions to how i can be able to use my phone normally again?
Im just a poor student so i don't want to waste money on a new phone after just 1 year :/
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Will this help with the battery?
kataria.vikesh said:
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Will this help the crashing/battery?
DippN said:
Will this help the crashing/battery?
Click to expand...
Click to collapse
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
kataria.vikesh said:
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
Click to expand...
Click to collapse
Nope, im not takeing backup of anything.
And one other thing i forgot to mention earlier, the phone now also thinks it is charging itself evrn when it is not. It think the usb cable is still connected.
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
DippN said:
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
Click to expand...
Click to collapse
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Both of you install CM10.1 using Procedure no 2 from OP.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Will try that when i get home, thx.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
paKS7 said:
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
Click to expand...
Click to collapse
Sadly, I can confirm that this did not change anything.
The problems are still there :/
DippN said:
Sadly, I can confirm that this did not change anything.
The problems are still there :/
Click to expand...
Click to collapse
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
DippN said:
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
Click to expand...
Click to collapse
May be hardware or software too..when you will vanish all data & cache then Software issue may be gone but if problem still persist, means you have hardware problem.
Also, root will be lost after flashing Stock ROM from ODIN.
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
paKS7 said:
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
Click to expand...
Click to collapse
Well, we are not on the same baseband. I'm on I9103XXLQ3.
About the cm verison im not quiet sure, the latest i flashed was "20130406" but since the problem were there the time before that when i flashed cm I cant answer exacly but i have a cm version "20130305" on my desktop and it could be that one that I used.
I never used cm before it was on nightlies so the modem file flashing i dont know anything about.
The thing you mention about that it shuts of when the phone gets busy and touchscreen gets unresponsive I can kind of confirm too.
I will flash GB now, will report back in an hour how it went.
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
DippN said:
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
Click to expand...
Click to collapse
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
DippN said:
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
Click to expand...
Click to collapse
Wipe data again.. If possible after wiping data Just reflash the GB.
Sorry if this is a repeat but I can't seem to find a similar problem. After staying on froyo for 2 years my phone started to slow down and give random application errors. I decided to try a new rom for the first time. I tried installing clockworkmod recovery and almost bricked my phone. A flash with gingerbread using odin got a working os on my infuse again. This came with red recovery already installed. For 2 weeks I used this rom and found that my dataconnection was super slow, random app errors and almost no wifi reception drove me to try something else. I flashed gingerbread bootloaders to get rid of the rainbow recovery(literally could not see a thing in recovery) and factory reset, cleared cache and flashed CWM 9 for infuse this post. This rom is running fast, data and wifi are great but there is a serious error. When I make a call, after selecting the number to call the screen goes black and unresponsive. No amount of button pushing will bring it back. Also you can see that the IR light on the front of the phone next to the phone turns on. The call is made and when the recipeint hangs up the phone will come back. If there is no cell signal this does not happen, the call screen normally appears and you can cancel the call. I have cleared cache, wiped data and dalvik cache, then reflashed this rom and the problem persists. I also downloaded a 3rd party dialer which displays the same symtoms. Is there a way to fix this? Is there a better rom to use? Any suggested workarounds would be nice. I would just like to get my phone back to a stable working os as I use it for android development. Some things specific to my situation: I live in Poland now. My phone is unlocked from ATT&T to work on european networks. This was working fine on froyo. I would post this on the developer thread but I don't have permission to do so yet. Thanks in advanced for any help/suggestions.
Go to delopment section and find cm10.1 by scott hart and odin back to stock with root/cmw follow instruction exactly the way the are coming from stock and should be good to go. And install GB bootloaders it will take care of not seeing recovery clearly and u can find how tos in stickies in delopment(I think) but do or research before u ask a lot of question and post bug. Its a good idea to read last 3-10 pages on a tom or going to install to know if there are any major issues or bugs.
This is just advise I have done what I telling and have not problems but i am not responsible if u brick ur phone
Sent from my SGH-I997 using xda premium
1991mustang50 said:
Go to delopment section and find cm10.1 by scott hart and odin back to stock with root/cmw follow instruction exactly the way the are coming from stock and should be good to go. And install GB bootloaders it will take care of not seeing recovery clearly and u can find how tos in stickies in delopment(I think) but do or research before u ask a lot of question and post bug. Its a good idea to read last 3-10 pages on a tom or going to install to know if there are any major issues or bugs.
This is just advise I have done what I telling and have not problems but i am not responsible if u brick ur phone
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Thanks for the help!! How is JB running on your infuse? GB boot loader was installed before CWM 9. Recover is working fine now. As far as I can tell no one else is having this problem with the dialer like me.
craigsmith132 said:
Thanks for the help!! How is JB running on your infuse? GB boot loader was installed before CWM 9. Recover is working fine now. As far as I can tell no one else is having this problem with the dialer like me.
Click to expand...
Click to collapse
Try using a diff dialer app
---Edit---
I uploaded this, move it to system/app
https://www.box.com/s/t79ao995vybfbsgxxgsz
Sent from my Galaxy Nexus using xda premium
bradman117 said:
Try using a diff dialer app
---Edit---
I uploaded this, move it to system/app
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for the help. I did try a different dialer which I downloaded from the market, but it had the same problems. I have already moved on to Jelly Bean and so far everything is working great. One problem that I still have is my Titanium Backup of my contacts wont work. This happened in ICS as well. Titanium says it works and suggests a reboot. After rebooting still no contacts. Unfortunately I didn't have these contacts synced with my Google account. Any ideas on how to extract the contact information from titanium and import it to the contacts app? I know the backup is good, I was able to use it when I updated to Ginger Bread.
craigsmith132 said:
Thanks for the help. I did try a different dialer which I downloaded from the market, but it had the same problems. I have already moved on to Jelly Bean and so far everything is working great. One problem that I still have is my Titanium Backup of my contacts wont work. This happened in ICS as well. Titanium says it works and suggests a reboot. After rebooting still no contacts. Unfortunately I didn't have these contacts synced with my Google account. Any ideas on how to extract the contact information from titanium and import it to the contacts app? I know the backup is good, I was able to use it when I updated to Ginger Bread.
Click to expand...
Click to collapse
Idk if I can help u with contacts app, I just sync mine with my gmail account.
Sent from my Galaxy Nexus using xda premium
bradman117 said:
Idk if I can help u with contacts app, I just sync mine with my gmail account.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I've got an idea, I think my problem is because I didn't make a fresh backup after I flashed ginger bread. I think the 'contacts' app must have changed database formats between froyo and ICS. If I were able to take that backup file and load it into an AVD, then restore my contacts and export them to my gmail account I think I could recover them on my phone without reflashing GB to do a fresh/compatible backup. Do you think it's possible or would most likely fail. I've never tried to bring files into an AVD but I do know that I have internet connectivity while debugging apps. It seems possible that I should be able to send files to the AVD as well.
craigsmith132 said:
I've got an idea, I think my problem is because I didn't make a fresh backup after I flashed ginger bread. I think the 'contacts' app must have changed database formats between froyo and ICS. If I were able to take that backup file and load it into an AVD, then restore my contacts and export them to my gmail account I think I could recover them on my phone without reflashing GB to do a fresh/compatible backup. Do you think it's possible or would most likely fail. I've never tried to bring files into an AVD but I do know that I have internet connectivity while debugging apps. It seems possible that I should be able to send files to the AVD as well.
Click to expand...
Click to collapse
If u go back to froyo u can use the free 30day trial of mybackup and back up the contacts. Then restore it on ICS or JB
Sent from my Galaxy Nexus using xda premium
My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
lock the bootloader and send it back
shahidhussain said:
My wife has Nexus 5 (it is completely stock and unrooted with unlocked bootloader) running running Android 4.4.2. Recently, the stock camera app stopped recording videos. Tapping the record button does not do anything while camera works perfectly in photo mode. I factory reset the phone but the problem persists. Any suggestions? Thanks in advance.
Click to expand...
Click to collapse
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
lichti1901 said:
Try to clear data and cache from camera in settings.
If that doesnt work either and you really have done the factory reset, you have to send it to repair bc of an hardware deffect. :crying:
Click to expand...
Click to collapse
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
I have the same problem, when I change the camera app to record nothing happens when I press the red record button. I think the problem started when I upgraded to 4.4.2
Sent from my Nexus 5 using Tapatalk
shahidhussain said:
I will try that but I think factory resetting clears cache, anyway. The phone camera worked fine previously but now suddenly it stopped.
Thanks anyway.
Click to expand...
Click to collapse
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
You need to uncompress each download before use, which creates a new directory for that exact download. That directory contains a ./flash-all.sh script, which handles the various operations, installs the necessary bootloader, baseband firmware(s), and operating system. Note that this operation deletes all user data by default
Click to expand...
Click to collapse
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Click to expand...
Click to collapse
I did not flash anything. The phone was OTA updated. Please note that the phone received OTA update and when I applied it, it completed its process but did not update (it was still on older android version) and this happened several times (I mentioned this on a separate thread here on XDA old post).
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
shahidhussain said:
I downgraded Nexus 5 from Android 4.4.2 to 4.4 and now the camera is working fine. But I am afraid of updating it back to 4.4.2.
Click to expand...
Click to collapse
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
lichti1901 said:
And you flashed the right one? Hammerhead-4.4.2
Like i said before, if that doesnt help, you have to send it back to get a replacement.
Make yure that data gets wiped also! Dont forget to backup your sdcard bc it gets also wiped.
Click to expand...
Click to collapse
gee2012 said:
Flash the whole 4.2.2 stock rom in fastboot bro, i have no issues with video recording both on Dalvik and Art runtime
Click to expand...
Click to collapse
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
shahidhussain said:
Yes, I did it. Flashed the stock 4.4.2 and everything seems to work fine. However, when I tried updating using OTA after downgrading the update failed and stopped with "Error" message. After flashing 4.4.2 from scratch will hopefully allow smooth future OTA updates. Thanks everyone.
Click to expand...
Click to collapse
Glad you worked it out!
Good thing is - you got a Nexus, so its easy to flash all the stuff and go back to stock/factory image/recovery/...
:highfive:
Any update on this? I have this exact problem. No unlock, not root just pure OTA stock.
1. Video does not record. You press the red button and no timer comes up.
2. A VID_20140126_224910.mp4.tmp file is created 395.54 KB.
3. Time lapse works as do all the other camera functions.
4. The basic Google FAQ has generic instructions if an app does not work so I followed these.
5. in safe mode the camera works fine.
6. Power off and on again. The Video Camera then works fine and creates normal .mp4 files.
Things I have done that may affected the Camera in the first place;
1. Clear cache.
2. Put a .thumbnails file in DCIM to stop the gigantic .thumbnail folder being created.
3. Running nova launcher.
Unlikely these are a factor as I isolated them as an issue and rebooted but worth a mention just in case.
Camera works but have found the it subsequently stopped working again and had to repeat the Google FAQ steps to fix an app.
To answer my own question I found the uninstalling Said It_1.3.37.apk fixed the problem and just to prove it reinstalling brought the problem back.
---------- Post added at 06:01 PM ---------- Previous post was at 05:27 PM ----------
Quick update. the developer emailed me back. He co firmed it does the same on his device and will send an update.