Disclaimer: I am not responsible if you brick your phone. And I am sorry if I posted it on the wrong spot.
Anyways, a while ago I had a terrible accident for my phone. I installed ChainFire3D on my A369i which is running 4.2.2. And since ChainFire3d is not compatible with JB, so, I am stuck in the boot screen. This is a very big problem, for the phone is a new model - no roms, no firmwares, no updates. But, I managed to fix everything. And I decided to put up a thread in case I forgot how I did it. So, here goes:
To fix it, first, I managed to install TWRP. Here's how:
Download the USB-driver for Lenovo A369i. You should use this driver and not any driver that looks like it.
Download and install the SP Flash Tool
Download TWRP recovery for SP Flash Tool.
Unpack the archives.
Turn off phone. Remove battery.
Run SP Flash Tool.
Click File> Open Scatter-loading file ... and select the file from the folder MT6572_Android_scatter_emmc.txt that is inside the TWRP recovery file.
Click the Download button and answer Yes (Yes) to the question;
Open Device Manager from the Properties of My Computer. Get it ready.
Connect phone to PC using USB cable.
This part is tricky. Open Device Manager and browse to Other devices category. You should see Preloader being installed. But Windows could not find its drivers. So, you right click it, and click Update driver, and browse to Lenovo A369i driver folder you have downloaded. You should be fast to do this, for the phone when plug in to PC without battery will turn on and off and on and off.
If everything is correct, you will see red bar in SP Flash Tool, then yellow, then a green circle.
Reboot phone to recovery, and you now have TWRP.
Second, to uninstall ChainFire3d, I used TWRP
Under TWRP, click Mount, click System, then go back to Home page.
Click Advance, click File Manager, browse to /system/lib
Look for libGLESv1_CM.so and rename it to libGLESv1_CMcf.so
Then, look for libGLESv1_CM_ORG_CF3D.so and rename it to libGLESv1_CM.so
Then, click chmod and change it to 644.
Look for libGLESv2.so and rename it to libGLESv2cf.so
Then, look for libGLESv2_ORG_CF3D.so and rename it to libGLESv2.so
Then, click chmod and change it to 644.
Reboot and wait. Phone is fixed.
Next, was to root it. Here's how:
Use motochopper exploit.
Unpack zip file..
Enable USB Debugging mode.
Connect your device to your PC via USB.
Explore to extracted directory and run run.bat
Credits: To those people who I forgot who posted much info about MT6572. Some of them, wrote in Vietnamese and Russian.
After I upgraded my desktop to windows 8, I am
unable to install USB driver for lenovo a369i. So if
anyone knows of a working driver file for this
device on windows 8 please suggest me the
link.....
Related
Please charge your phone atleast 50% or above before you follow the guide.
I am not providing any screenshots.
Steps:
1. Download all the attached files to this post.
2. Unzip mt65x3 usb vcom drivers.7z and install the drivers.
3. Create a folder in C drive or anywhere you like and unzip SP Flash Tool v2.1134.00.7z.
4. Copy the files MT6573_Android_scatter.txt and boot.img to the folder you created and unzipped the SP Flash Tool v2.1134.00.7z.
5. Open the folder where you extracted SP Flash Tool v2.1134.00.7z and right click on the Flash_tool.exe and run as Administrator.
6. In the Flash tool window, click on File and Open Scatter-loading File and on the pop-up window, select the file MT6573_Android_scatter.txt and click Open
7. A pop-up might appear, click OK and if you see any kind of error, ignore it.
8. A list on the bottom pane should appear of the flash tool window. Uncheck all excet BOOTIMG and click or double click on the BOOTIMG. On the pop-up window, select the boot.img file that you copied earlier and Open.
9. Click on Options of the Flash tool and click USB Mode if not selected.
10. Now you are ready to flash your phone.
11. Switch off your phone and take out the battery. Put your battery back on the phone. Do not switch on. Connect it to your PC with the USB cable without pressing any button on the phone. Now windows should find the drivers and install it. After drivers are installed, unplug the cable from your phone. Take out the battery from the phone and put it back again. Do not switch on.
12. Now on the Flash Tool window click on the Download button. A message will appear on the bottom right of the window 'Please insert USB cable in 14 seconds', with the counter running. While its running, connect your phone to the PC. If you fail to do it, repeat Step 12.
13. When connected properly, you will see a yellow progress bar, after finishing 100% a pop up window will appear saying BOOTIMG downloaded. You are done.
14. Now unplug your phone, take the battery out, put it back and start the phone normally as you do. Let it fully boot. (Nothing should be wrong, cuz nothing happened to mine. I tested it first. Ashik Anwar second.)
15. Enable USB Debugging on your phone and and connect it to the PC.
16. Installing USB ADB Drivers or USB Debugging Drivers:
Unzip usb_driver.zip.
Open 'Device Manager'.
Right click on 'Micromax A50' and click 'Update Driver Software'.
On the new window, click 'Browse my computer for driver software', then click 'Let me pick from a list of device drivers on my computer'.
Click 'Have Disk'.
On the new Pop-up window, click 'Browse' and go to the folder where you previously unzipped the drivers and open the folder usb_driver.
Now select from the list of files 'android_winusb.inf' and click 'Open', then click 'OK'.
Now from the list of 3 options, select 'Android ADB Interface' and click 'Next'.
An 'Update Driver Warning' will appear, click 'Yes'.
Another Warning will appear asking 'Would you like to install this device software.
Click Install.
Now the drivers should be installed.
17. Now unzip unlockroot23.zip and install the unlockroot23.exe and run the program.
18. Now time to root. On the UnlockRoot window, click ROOT and the program will root it. When finished, it will ask you to restart your phone. So switch it off and switch it on again.
19. Now after you have switched on your phone, browse through the Apps Drawer. You should find an application called Superuser.
You are ROOTED!!!
Still check it by installing an app that needs root permissions, like Root Explorer.
Install BusyBox from PlayStore cuz some programs need it for root access.
Thanx to Varun for providing the modified boot.img and thanx to all the developers for their hard work in cracking and hacking Android for the benefit of the people.
To overclock, Install MTK CPU-Control test from PlayStore. Doesnt need root.
You can overclock upto 806MHz. Enable Set on boot.
Overclock To 754MHz for stability issues.
Enjoy folks!!!
EDIT:
If you are getting error while flashing, repeat the steps.
If you are unable to boot, please flash the original_boot.img
Remember to run the Flash Tool as Administrator
Also the UnlockRoot program as Administrator
I am not responsible for the death of your phone
Rooting the micromax a52 aisha
i have read your post, can you post a tutorial to root micromax a52 aisha, and increase internal memory
can you help us to root micromax a56
http://forum.xda-developers.com/showthread.php?t=1791748
We also got boot.img and other files
http://forum.xda-developers.com/attachment.php?attachmentid=1235489&d=1343837004
Pls can this procedure work with all mt6573 chipset phone. Cause I've tried all the major rooting process like superone and it likes.
The phone is TECNO T1.
Thanks in advance
Sent from my TECNO T1 using xda premium
saheb11123 said:
i have read your post, can you post a tutorial to root micromax a52 aisha, and increase internal memory
Click to expand...
Click to collapse
So sorry
Been busy
Read this whole website for anything related to Mediatek processors for flashing.
http://bm-smartphone-reviews.blogspot.in/2011/10/mt65x3-flashing-tutorial.html
You need to have a linux machine, Ubuntu, to unpack the boot.img, making unsecure to 1 and the repack it. Flash it back.
I dont have a linux machine anymore.
Searh the net for tutorials.
Bootloader unsecure.
I dont have the time and also aint using the A50 anymore.
Dont mind
Goodluck.
aydot360 said:
Pls can this procedure work with all mt6573 chipset phone. Cause I've tried all the major rooting process like superone and it likes.
The phone is TECNO T1.
Thanks in advance
Sent from my TECNO T1 using xda premium
Click to expand...
Click to collapse
Procedure is same, but bootloaders are/must be different.
Read http://bm-smartphone-reviews.blogspot.in/2011/10/mt65x3-flashing-tutorial.html
First dump the boot.img
unsecure it.
Flash it back.
for unsecuring, google
busy
no time
cant help more than this
goodluck
Thanks a lot for a wonderful guide
Can this be done from a linux machine? (Ubuntu for e.g.)
Hello, please be patient with me. I need to install a cwm to change a korean rom, but when i go to the market and install the rom manager, when i click, says that my phone is not on the list. My phone is a korean vega 5 im-t100k and i've found a download web for this phone http://mizal.net:82/pantech/NO.5. And i've found this CWM_6.0.19_For_T100K.zip to download. ok, when i decompress, it appears a directory with 6 files: adb.exe, fastboot.exe, AdbWinApi.dll, AdbWinUsbApi.dll, installer.bat and recovery.img. Well, i've rooted my phone with unlock root and superuser works ok. I've installed adb in my windows 8 and i have access to my vega 5. Ok, I connect windows 8 with my phone in debuggin mode and transfer files with no problem. Ok, i've opened the directory with the 6 files and clicked on installer, it appears the terminal and says is looking for device, but nothing else. Please i've been looking information all around the web but it's all a mess. Please someone would be so kind to tell me how to do it step by step?. Thank you very much in advance, i'm desperated.
You need to have the phone's drivers installed on your computer. Try connecting the phone in USB Debugging mode and install the drivers. You can check the device manager in control panel to see if you have working drivers or not.
Let me know if it didn't work.
work
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Not rebooting automatically after fastboot continue command
sevenr33 said:
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Click to expand...
Click to collapse
Hi, I've followed the instructions you gave and now I'm stucked at the part which it wouldn't reboot by itself after i typed the "fastboot command".
1) Before I've had chance to charge my phone, it ran out of battery and fastboot mode does not charge the phone. I've also tried to flash the recovery image in fastboot mode, but i got Err:0x2017, what is this error about?
2) And the GUI should run in location bin files as my fastboot driver, not the 0KB fastboot in default location.
2) Do all these steps require unlocking bootloader? I don't think I've unlocked, all I did was just root the phone.
Help
Hi
I have a rooted Huawei Ascend Mate but I installed the wrong TWRP recovery a few days ago. My phone keeps booting and I can't use my recovery, because it is a touch version but it doesn't respond to my touch. So, I don't know if I can flash my stock rom or another recovery...
Can I use this tutorial to fix my phone or can you please make one for the Huawei Ascend Mate?
kind regards
So, I'm trying to follow the instructions, but when I get to this following part, I get completely stumped.
rrvuhpg said:
4. Follow the official Sony instructions for getting the unlock code from [here](https://developer.sonymobile.com/unlockbootloader/). Further paste the code in BLU menu of Flashtool. You can also find video instructions [here](https://www.youtube.com/watch?v=6lKWd5LlUoA).
Click to expand...
Click to collapse
1. What the heck does it mean, "paste the code in BLU menu of Flashtool"?? I need step by step instructions on how to do that.
You see, because when I click the "BLU" button in flashtool, it doesn't bring up a place to paste something into.
The "further video instructions" didn't help AT ALL, because the video never uses Flashtool!
So, then, at that point, I tried just using the instructions of the video instead, but when it got to the part about installing the fastboot driver, my folder Android\sdk\extras\google, DOESN'T HAVE A "usb_driver" folder! How do I get it??
I got my bootloader unlock code.
I have installed flashtool.
I have installed android studio (because I couldn't figure out how to just install "sdk tools")
I downloaded the adb drivers file, Xperia_XA_driver.zip, and unzipped it, and have the folder Signed_so0116_driver on my desktop.
I downloaded the fastboot driver zip, and have the android_winusb.inf file.
I have no idea what to do with them.
I have downloaded the file boot-XA-SS-33.2.A.2.73.img. I don't know what to do with it.
I have downloaded the superSu zip from their website as linked.
I have downloaded recovery-TWRP-XA-SS-EXT4-3.1.0.img as linked, because I have the single SIM.
I tried using the Flashtool-drivers.exe found in the drivers folder of Flashtool, but it didn't have the drivers for the Xperia XA!
How do I tell flashtool that I have the drivers??
Please help me, someone.
Please, provide me some step by step instructions on what exactly to do with my bootloader unlock code and the drivers (and other files) I have downloaded.
Thank You.
Sorry about my English, but:
1. If you got your phone's driver in your computer, when you plug your phone into PC, it will auto install driver so your PC can detect your phone (MTP, ADB, etc...)
2. Fastboot driver will help your PC detect your phone when your phone in fastboot mode.
3. If you have ADB, you will abe to flash *.img file into your phone. modified boot.img file will help you not bootloop when you flash recovery file. If you want to root your phone, you must flash that boot.img file and recovery.img file via fastboot, then you will able to install SuperSU via Recovery.
Hello. Has anyone rooted the Ulefone Power 6 yet? Im looking to have TWRP installed onto my new Power 6. My goal is to figure out a way to add user profiles, as it currently does not have them activated. I read online that you could edit the .prop to have any android activate the user profiles, but i cannot do this without my phone being rooted. Thanks in advance.
Start Here
Dvalin21 said:
Start Here
Click to expand...
Click to collapse
Sorry, This is for the original Ulefone Power, not the Power 6. Different phones. The instructions didn't lead me to anything useful. I have since update my phone to the latest firmware via the stock update app. I still haven't found a successful way to root the Power 6. There is this thread (https://www.getdroidtips.com/root-ulefone-power-6/), but the ADB commands to not work, and does not fastboot my phone to install the patched image. But either way, the instructions do not include a TWRP, so Im back to square one. HELP!
How to root Ulefone Power 6 (Build Power_6_SF1_V07) Updated 9/22/2019
OK. It was tough, but I finally found a way to root the Ulefone Power 6. I still haven't figured out a way to install TWRP, but that's because i have to build a custom recovery, and that's too advanced for me. So, anyone is welcomed to help out with building a custom recovery for TWRP. As for the root, This is what you will need:
Pre-Requirements:
Device battery charged up to 50%.
Developer Options enabled with OEM Unlocking and USB Debugging enabled
Remember to take a full backup of device data (Internal Storage, SMS), it will get formatted.
A Windows or Mac PC/Laptop is necessary to flash Magisk
A USB cable to connect your device with your PC
Download Links:
Download Minimal ADB Fastboot 1.4.3 (Portable). Extract it to your desktop.
It's best to give administrator privileges to the tools before you use them. To give them admin privileges:
Right click on adb.exe and select "Properties" at the bottom of the menu. Click on the "Compatability" Tab and check the "Run this program as an Administrator" box. Click on the "Apply" button and then the "OK" button to close the properties window.
Repeat the same process for the "cmd-here.exe" and the "fastboot.exe" files.
Ulefone USB Drivers. Extract it to your desktop and make sure you install the drivers.
MTK USB Drivers. Extract it to your desktop and make sure you install the drivers.
Latest Ulefone Power 6 Stock ROM. Or you could make a back up yourself. (latest rom as of 2/25/20 is GQ3081SF1_M860B1_Ulefone_20190921_V07(Non-EU) ).Extract it to your desktop.
MTK SP Multi Port Download Tool. This will be used to flash the most recent Ulefone rom on your device. Extract it to your desktop.
Download Magisk Manager
After downloading the Stock ROM (will be a .ZIP file), extract it to your PC.
Connect your device via USB cable
Find the "boot.img" file inside the Stock Rom folder you just extracted and copy only the "boot.img" file to your devices storage.
Copy Magisk Manager.apk to your devices storage
Using your device, install Magisk Manager
Open the Magisk Manager on your device.
Select "Install" from the first option next to "Magisk is not installed" and again select install.
Now, tap on "Select and Patch a File".
Go to your devices storage where you have copied the "boot.img" file earlier and select it.
Magisk will start patching the boot image.
Once the boot image is patched, Magisk will save the image on your "Download" folder located on your devices storage.
Locate the patched image (magisk_patched.img) and copy the "magisk_patched.img" to your PC. Make sure the patched image (magisk_patched.img) is inside the same folder as the extracted ADB and Fastboot tool folder on your desktop.
Open/run MTK SP Multi Port Download Tool
Click on File from the Menu located at the top right and select "Open Download Agent File"
Locate and select "MTK_ALLInOne_DA.bin", located in the same folder as the MTK SP Multi Port Download Tool folder.
Press the "Open buton" to select the file and close the window.
Now, click on the "Scatter File" button located at the top left.
Locate and select the XXXXXXXX_scatter.txt file located inside the extracted Ulefone Power 6 Stock Rom folder.
Press the "Open buton" to select the file and close the window.
Now, tick the "BootRom+PreLoader COM Sel All" check box located under the "scatter file" button.
Now, Click on the "Scan" button located at the bottom right.
Select Yes from the pop up window
Now, power off you device and disconnect your device from your PC by removing the USB cable from your device.
Now, reconnect the USB cable to your device while it is powered off.
MTK SP Multi Port Download Tool should detect your device and a green bar should appear confirming the connection with the words "Scan Success!" to the left of the green bar.
Press the "Stop all" button located at the bottom right
Disconnect and reconnect your device from your PC
Uncheck the "BootRom+PreLoader COM Sel All" box and check only the line with the green bar.
Click on the tiny "Start" button located to the right of the green bar.
You can confirm the flash was successful when the words "PASS" is visible to the right of the tiny "Start" & "Stop" buttons
Once the flashing is complete, you can close MTK SP Multi Port Download Tool and power on your device.
Configure your device to get to the home screen (skipping as many options as you can. You will have to format one more time) and enable Developer Options, OEM Unlocking and USB Debugging again.
Make sure your device is connected to your PC.
Now, you need to open up a command window (cmd window) inside the Minimal ADB Fastboot 1.4.3 (Portable) folder. To do this, open the "cmd-here.exe" file.
Next, enter the following command in the cmd window:
adb devices
(this command will confirm your device is connected to your PC via ADB )
Your device will show a pop up window asking for permission to connect via ADB. Click on the "Always Trust This Device" and Accept the connection
If successful, you should see the word "Device" to the right of your devices name on the list that the cmd window created.
Next, enter the following command:
adb reboot-bootloader
(This command will boot your device into fastboot/bootloader mode. It will turn off and the device will have a black lit screen)
Check that your device is connected to your pc by entering the following command:
fastboot devices
(this command will confirm your device is connected to your PC via fastboot/bootloader mode ) If successful, you should see the word "Device" to the right of your devices name on the list that the cmd window created.
Next, enter the following command:
fastboot flashing unlock
(if nothing happens, press the Volume up+ on your phone to start the unlocking of the bootloader)
(this will unlock your bootloader)
Next, enter the following command:
fastboot getvar unlocked
(this will confirm you have unlocked your bootloader. It will say "unlocked: yes")
Next, enter the following command:
fastboot flash boot magisk_patched.img
(This will replace your stock image with the patched image you created using Magisk Manager)
Next, enter the following command to reboot your phone:
fastboot reboot
Install magisk manager using your file manager. Make sure to follow directions when it asks you to give special permissions to install.
Open Magisk Manager and click on "OK" when it starts up and asks you for "additional setup".
Congratulations! Your device is rooted.
Extra notes:
If you come across a red watermark with the Chinese words and "Tee Keys" and/or "Google Keys" on the top right of your devices screen, this is how you fix it.
make sure your device is turned on and connected to your PC.
Open "cmd-here.exe" located in the Minimal ADB Fastboot 1.4.3 (Portable) folder.
Next, enter the following command:
adb shell pm uninstall -k --user 0 com.mediatek.factorymode
(This command will not do anything at the moment, but will remove the watermark after you reboot your device)
Next, enter the following command to reboot your device:
adb reboot
The watermark should be removed when your device restarts again.
ENJOY!
19Henry83 said:
OK. It was tough, but I finally found a way to root the Ulefone Power 6. I still haven't figured out a way to install TWRP, but that's because i have to build a custom recovery, and that's too advanced for me. So, anyone is welcomed to help out with building a custom recovery for TWRP. As for the root, This is what you will need:
. . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . .
ENJOY!
Click to expand...
Click to collapse
Thanks a heap for all these instructions, would not have been able to do this without them.
Just a few extra pieces of information for anyone else caryring out the above steps:
- If you your stock ROM doesn't have a file manager in order to open/execute the MagiskManager APK file then using Chrome to download the APK file will allow you to execute it.
- in the SP Multi Port Tool, after checking the line with the green bar and clicking start you'll notice the time in seconds counting next to the start button. At this point you may need to unplug your USB cable and replug it in order for the SP Multi Port Tool to detect the devices and actually start properly
- If the SP Multi Port Tool requires a checksum.ini file you can follow the instructions on the hovatek site (Google 'checksum.ini generatemediatek hovatek' I'm a new user so can't post links):
Note there is a download link for the CheckSum_Gen.zip file which will require you to register for an account on the hovatek website. You can create a junk/throw away account with a fake email as it doesn't require email confirmation. Also all of the files inside the CheckSum_Gen.zip folder need to be placed inside of the stock ROM folder where the scatter file is located.
- The watermark can only be removed after the MagiskManager carries out its additional setup and after root access is complete.
Still hoping to find a compatible TWRP recovery. If anyone builds one please let us know!
Hi, 19Henry83
I did try your method and it works great. I rooted my Power 6. The thing is I did this in hope to fix a freezing touchscreen issue. Touch screen frezzes and I need to lock/unlock my phone constantly to fix it. Now I'm convinced this is not a software issue and I will return the phone to the seller. So I wanted to get back to the original firmware. When I do that however there is still that red watermark and my IMEI is deleted. Is there any way to get back to the factory software and not have the red watermark, as I assume it will void my warranty.
I Need help please ,, I need the TWRP Recovery, Tool / Utility for the Ulefone Power 6, I have looked for it in many web pages and I cannot find it, all the ones I find have the same name "3.3.1 Power 6" and not It works for me when I install them, I get the same recovery that I had when I try to enter
jiroscop said:
Hi, 19Henry83
I did try your method and it works great. I rooted my Power 6. The thing is I did this in hope to fix a freezing touchscreen issue. Touch screen frezzes and I need to lock/unlock my phone constantly to fix it. Now I'm convinced this is not a software issue and I will return the phone to the seller. So I wanted to get back to the original firmware. When I do that however there is still that red watermark and my IMEI is deleted. Is there any way to get back to the factory software and not have the red watermark, as I assume it will void my warranty.
Click to expand...
Click to collapse
Hello Jiroscop. I had the same problem and only noticed after i read your post. Now, a couple months later, i managed to use an IMEI changer to insert my IMEI found on my original box where my phone came in. It should have two IMEIs. I don't know if i can explain on this forum. Try researching it on your own and get back to me if you cannot find a way to fix your phone.
NOTE: you will need your original IMEI's, changing the IMEI's with anything other than the original ones will brick your phone.