You follow this guide and use the software at your own risk.
I will no be held responsible for anything that happens to you or your device if you choose to follow it or use the software.
Everything you do you choose to do yourself and has nothing to do with me!
Drivers:
View attachment MT6589+drivers.zip
ROOT:
To root use Framaroot.
Recovery:
View attachment W200_130703__recovery_130813-120100.img
To flash Recovery put the recovery file on sd card, download Mobileuncle Tools from Google Play and run it (remember to ROOT the device first). Then go to "Recovery Update" and select the file from sd card. After that you will get a message to restart the phone. Go for it and enjoy.
SP Flash Tool:
View attachment SP_Flash_Tool_1316.rar
Official Firmware (Flash via SP Flash Tool):
ThL W200 Firmware version 13 08 15
Scatter File:
View attachment MT6589_Android_scatter_emmc.txt
The thread will be updated soon!
Related
Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu
May you also upload any stock ROM for OT-4010D ???
Here i am presenting the easy method how to flash stock rom by using SP flash tool
Recommendation :-
1. PC with installed USB Drivers
2. SP Flashtool herehttps://drive.google.com/file/d/0B-0BFYGPDi0YcWpNOE90a216enM/view?usp=sharing
Procedure :-
1. Download And Install USB drivers On Your Computer In Case of Already Installed skip this Step.
2. Power off your android smart phone and remove the battery.
3. download the STOCK ROM and extract on your PC.
4. also extract the SP Flash tool and Open ' Flash Tool exe"
5. Once the Flash tool is Launched click on "download"
6. After click on "scatter loading File" Tab.
7. Locate the "Scatter.txt" location in Which U can extract Your stock rom.
8. NOW,click on "DOWNLOAD" Tab.
9. Connect Your Computer By Using Data cable without battery
10. IN some micromax mobiles Tool will start To download without battery.
BUT, in some mobiles like my KARBONN TITANIUM S5 ULTRA Device Download will start After insert the Battery.
So, please kindly note this step.
11. Congratulation U Can successfully flash your STOCK ROM.
Kip Mind,
[SIZE=''3"] 1. The following steps are works only the stock and custom rom which comes with the scatter file.
2. please, full Backup your Device through stock or custom recovery.
3. This backup will helps to recover your IMEI.
4. In case of lost IMEI Restore previous Backup.
[/SIZE]
Credits:-
shubham shahu .
Hit thankx If u Like my Work :good:
Now you're probably wondering: "Why would I brick my beloved Android phone/tablet?"
Well, here are a few reasons for that question down below!
-Brick then unbrick your device for fun.
-Prank your friends!
-Test your phone if it's brick-able!
-Brick then boot into recovery to flash a ROM or file to see if it unbricks your device!
-Easily break your old phone when upgrading to a new one! (Sorry. This unfortunately doesn't work on Iphones.)
-Brick your phone because you CAN!
Warning! I am not responsible for what happens to your device. It is only supposed to Soft Brick your device and not a Hard Brick. Be careful!
Steps...
1: Download recovery.img from the link below.
2: Download MobileUncle MTK Tools from here.
3: Place the recovery.img file on the Root of your SDCARD or Internal Storage.
4: Install and open the MobileUncle Tools app.
5: Select the Recovery Update function.
6: Choose recovery.img then click 'Yes' and 'Yes' again.
7: Congrats
Downloads...
Recovery.img: http://www.mediafire.com/download/fidxjdpd8mtis1e/recovery.img
Mobile UncleTools MTK App: http://www.apk20.com/apk/291087/
Unbrick your Android device guides: https://www.google.co.nz/webhp?sour...ie=UTF-8#q=how to unbrick your android device
Enjoy!
Hello friends
today i am going to tell you how you can root your Micromax Nitro 3 E352
So first let me tell you, there are 2 methods of rooting this device.. (i have personally tested it)
1. Using Kingroot
2. Flashing SuperSu
Method 1 : Rooting through Kingroot :-
what you need :-
1. Kingroot Apk (Get it Here : Kingroot App
2. Micromax Nitro 3 Working Device
3. Fast Internet Connection ( 3G/4G)
4. Human Brain
that's all we need , lets get started !
First of all We need to Enable Unknown Sources Installation,
to do this, go to Settings>Security> scroll down a little and enable Unknown Sources
Now Install Kingroot Apk and open it.
Now tap on big blue button (ROOT) and wait for some time...
your device may reboot but you need not to worry..
after 2-3 minutes your device will be rooted..
Enjoy
Method 2 : Flashing SuperSU zip through TWRP :
What we need for this :
1. PC
2. TWRP recovery for E352 ( Get it here : TWRP for Nitro3 )
3. SP Flash Tool ( Google it)
4. Mt6592 Scatter File (View attachment 3851592
5. Human Brain Only
that's all we need right now.. lets get started
( Note : Before doing anything with your device, make sure you have made a backup of all the apps, contacts and all important things )
1. First of all create a new folder in any drive
2. Copy TWRP.img, Mt6592 Scatter file, to that newly created folder
View attachment 3851620
3. Rename recovery_TWRP.img to recovery.img
View attachment 3851617
5. Open SP flash tool
6. Click on Scatter-Loading
7. Go to the newly created folder and select scatter file.
View attachment 3851626
8. Now make sure that the Recovery row is ticked
View attachment 3851627
9. Now click on Download
View attachment 3851628
10. Switch off Your mobile and Connect it using USB cable
11. Wait for sometime and a Green Circle will appear..
**Done**
You have successfully flashed TWRP on your Micromax Nitro 3 E352.
Now to flash SuperSu file :
download the latest Supersu Zip file.. ( here : SuperSU
download this file and put it in the root of your SD card
Now reboot into recovery ( Power + Vol Up button ) for 5 seconds
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLRU5TRTk5bERWSGM
Now in TWRP tap on Install
Now select the SuperSU zip file
Screenshot : https://drive.google.com/open?id=0B4m3TUKZNhSLMlRPRkJtZnE4aG8
Now Swipe to Confirm flash...
wait 10 seconds it will be flashed..
done...
now reboot !
Congrats ! You have successfully rooted Your MMX Nitro 3 and Installed TWRP 3
hit thanks if it worked for you
commend down if you encountered any problem..
REQUIREMENTS:
1. YOUR DEVICE ie Panasonic P71 or any Panasonic Device
2. YOUR STOCK BOOT.IMG OF YOUR DEVICE OR
FOR PANASONIC USER DOWNLOAD FIRMWARE FROM THIS SITE AND EXTRACT IT, U WILL FIND THAT BOOT IMAGE
SITE:
3. PC INSTALLED WITH MTK VCOM DRIVERS PROPERLY
4. SP FLASH TOOL ON YOUR PC
5. MAGISK MANAGER APK INSTALLED ON YOUR PHONE
6. ROOT CHECKER APP DOWNLOADED ON YOUR PHONE FROM PLAYSTORE.
PROCEDURE:
1. COPY AND PASTE YOUR STOCK BOOT.IMG FROM PC TO YOUR PHONE.
2. NOW OPEN MAGISK MANAGER ON YOUR PHONE AND CLICK ON INSTALL , THEN CLICK ON PATCH BOOT IMAGE FILE
.
3. AFTER THIS SELECT THE STOCK BOOT.IMG WHICH U COPIED EARLIER ON YOUR PHONE.
4. AFTER THIS SOME PROCESS WILL EXECUTE, LET IT COMPLETE, AFTER IT IS COMPLETED U WILL SEE MESSAGE: ALL DONE. NOW CLOSE MAGISK MANAGER AND CHECK YOUR PATCHED BOOT.IMG IN DOWNLOADS OR IN
MAGISK MANAGER FOLDER IN YOUR INTERNAL STORAGE.
5. NOW COPY YOUR PATCHED_BOOT.IMG TO YOUR PC.
NOTE: DO NOT UNINSTALL MAGISK MANAGER AFTER ABOVE PROCESS.
NOW ON PC
1. DOWNLOAD MEDIATEK SCATTER FILE ACCORDING TO YOUR DEVICE CHIPSET. FOR PANASONIC P71 IT IS MT6737M.
2. AFTER DOWNLOADING OPEN SP FLASH TOOL ON YOUR PC AND CLICK ON SCATTER LOADING FILE AND SELECT YOUR DOWNLOADED SCATTER FILE.
3. NOW SELECT BOOT OPTION AND BROWSE YOUR PATCHED_BOOT.IMG
4. NOW POWER OFF YOUR PHONE AND REMOVE YOUR BATTERY AND CONNECT TO YOUR PC.
5. NOW TAP ON DOWNLOAD BUTTON IN SP FLASH TOOL AFTER THAT FLASHING WILL BE DONE JUST WAIT FOR FEW SECONDS. A MESSAGE WILL POP UP CLOSE THE MESSAGE AND DISCONNECT YOUR PHONE.
6. AFTER THIS PUT YOUR BATTERY BACK AND POWER ON YOUR DEVICE.
7. AFTER STARTING ROOT CHECKER APP CHECK YOUR ROOT STATUS BY TAPPING ON VERIFY ROOT.
8. THEN IT WILL ASK PERMISSION OF SUPERUSER GRANT IT AND NOW YOUR PHONE IS ROOTED!!!
ENJOY.
FOR PANASONIC P71 USERS I CAN PROVIDE U THE PATCHED_BOOT.IMG AND SCATTER FILE OF MT6737M,
LINK:
FOR SCATTER FILE:
https://drive.google.com/open?id=1u_j39ob0qG4CiJ3NOqYYD5VI3GNRpNzj
FOR PATCHED BOOT IMAGE
https://drive.google.com/open?id=1ZyohxTuLwbG5eXReTRyoIXC87HoH_ESv
THANK YOU! ENJOY
FOR ANY PROBLEM COMMENT BELOW
Site for firmware of panasonic p71
-> firmwarefile google it