Database Info

[Q] Issues with Rogers HTC One X

First off here's what I'm working with:
Rogers HTC One X
Cyanogenmod from http://forum.xda-developers.com/showthread.php?t=2205183
Recovery - TWRP 2.5
Hboot - 2.14
radio - 0.23a.32.09.29
Rooted - I don't think so
SuperCID - 22222222
S-OFF - No
Lock status - Unlocked with HTCDev after SuperCID
Story time:
After deciding to install cyanogenmod on the weekend I've run in to a myriad of issues. I was able to unlock, flash CWM recovery, and install Cyanogen fairly easily, but I ran into the issue where the touch screen doesn't work.
What I've done:
I've found the fix detailed here: http://forum.xda-developers.com/showthread.php?t=2159863, but have been unable to get all the prerequisites going. From the screen fix thread linked above I need to be rooted, s-offed, and superCIDed.
I believe I got the superCID working by following the steps in this post: http://forum.xda-developers.com/showpost.php?p=41482419&postcount=2 and fastboot oem readcid returns 22222222
After that I was unlocked before but locked and relocked with a new unlockcode from htcdev
For rooting, I've looked at the methods listed under Root on http://forum.xda-developers.com/showthread.php?t=1671237, but I'm not too sure where to find which firmware I'm on. That would be the version of cyanogen would it not. I've tried the x-factor method using All-In-One Toolkit from http://forum.xda-developers.com/showthread.php?t=1952426 to no avail, as well as SuperSU from http://forum.xda-developers.com/showthread.php?t=1673935 and this one: http://forum.xda-developers.com/showthread.php?t=1644167, but I don't think any method has worked so far.
In order to use S-Off I'm pretty sure you need to be rooted, so it of course it didn't work, what made me think I wasn't rooted was when I was going through the Facepalm S-Off guide here: http://forum.xda-developers.com/showthread.php?t=2155071 when I ran "adb shell su -c "/data/local/tmp/soffbin3" it would just me the error su: not found, which means your not in as root according to: http://forum.xda-developers.com/showthread.php?p=38278577#post38278577
I've also tried going back to stock using the RUU RUU_Evita_UL_Rogers_WWE_1.94.631.3_Radio_0.18as.32.09.28L_10.103.32.24L_release_268972_signed.exe from http://ruu.androidfiles.org/getdown...9.28L_10.103.32.24L_release_268972_signed.exe, but when I run it I get error 99: Unknown Error, and I if I look in the log it creates it says error 44 HBOOT mismatch. I'm running after relocking, and I've tried just grabbing the rom.zip from %temp%, extracting it and flashing the boot and system imgs, but it says the system.img is too big.
At this point I'd just like to get my phone to work. If I can get it with CM that'd be cool, but stock would be good too. Any help would be appreciated.
Thanks!

In cyanogenmod you have to allow adb root access in developer options.
To ruu without s-off you need to change your cid back to the default but you will brick if you update to 3.18 after. Best to s-off since you changed your cid.
Sent from my Sony Tablet S using xda app-developers app

exad said:
In cyanogenmod you have to allow adb root access in developer options.
Click to expand...
Click to collapse
The touchpad doesn't work in cyanogenmod though, that's the root of the issue
exad said:
To ruu without s-off you need to change your cid back to the default but you will brick if you update to 3.18 after. Best to s-off since you changed your cid.
Click to expand...
Click to collapse
I was trying to RUU before changing CID, but was running in to "FAILED (remote: 44 hboot version check fail)", when running the RUU mentioned in the OP

Ah I see the ruu must have had an older hboot version than the one on your phone. You cant downgrade firmware without s-off.
To fix your issue you will need to flash a sense rom and then s-off and then downgrade your touchscreen firmware. Then you can flash whatever evita rom you like.
Sent from my Sony Tablet S using xda app-developers app

exad said:
Ah I see the ruu must have had an older hboot version than the one on your phone. You cant downgrade firmware without s-off.
To fix your issue you will need to flash a sense rom and then s-off and then downgrade your touchscreen firmware. Then you can flash whatever evita rom you like.
Click to expand...
Click to collapse
Thank you very much!
I flashed the Sense build from http://forum.xda-developers.com/showthread.php?t=2293032 and was then able to S-Off. After that I was able to down grade the touchpad firmware and install cyanogenmod.
Thanks again for pointing me in the right direction
:victory:

[Tutorial] Update to hboot 2.15 via RUU

Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.

Have you changed your CID?

mag13 said:
Have you changed your CID?
Click to expand...
Click to collapse
Please read again.
I was Super CID (11111111) but easily changed it to match TMobile (T-MOB010) with this tool for the update.
Click to expand...
Click to collapse

yooouuri said:
Please read again.
Click to expand...
Click to collapse
I am on Super CID and it does not work

mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
You have to change your CID back to the one for your RUU.

Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4 after I flashed MaximusHD and firmware?
Now my phone is like this:
Hboot 2.16
Radio 1.20.50 (worst radio ever)
S-OFF
CID 11111111
The rom's with sense 5 (I tried just maximus because the others are not compatible with the new firmware, the sdcard mount point for multi user) are killing my battery more than twice faster compared with ViperS. 2h Display vs 5h on Viper.
Thank you!

Can we use this as rollback from h-boot 2.16 ?

mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
I didn't think it would. Glad you didn't brick your phone and I'll update the OP based on your experiment.

flow27 said:
Can we use this as rollback from h-boot 2.16 ?
Click to expand...
Click to collapse
arazvan2002 said:
Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4
Click to expand...
Click to collapse
Upgrading your hboot is a one way street, as far as I know. Can't you change the radio to something else?

I flashed Viper ROM. All the things are ok, gsm, wifi, etc just I can't see the internal memory like I should. I can browse to it file es file explorer but I need a method to default mount the new (4.2.2) location of it. Where is mounted by the internal memory in 4.1 JB? I discovered a file vold.fstab. Maybe I can change something like that somewhere to be able to use 4.1 ROM's again.
Sorry for OFF topic.

Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?

yooouuri said:
Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?
Click to expand...
Click to collapse
Yes you can if youre s-off.
Sent from HTC One S using android 4.2.2 sense 5

Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?

yooouuri said:
Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?
Click to expand...
Click to collapse
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?

tivofool said:
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?
Click to expand...
Click to collapse
That's the right thing to do, yes?

kilo94 said:
That's the right thing to do, yes?
Click to expand...
Click to collapse
Yes

I have the same problem. I can't go back to stock. I haven't changed my CID yet but I see that has not worked for you.
Did you try with HTC__001 ?

dhigby said:
Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.
Click to expand...
Click to collapse
Hey I used your instructions and everything was perfect thank you. I used to upgarde and downgrade hboot even to restore the HTC one S

I got the RUU "Error: 159" again with both RUU from first post and testet with each common cid, but at the end I only got success with super cid and the TMO_US Ruu.
Now I am back on Hboot 2.15 and can flash again the newest custom-recovery, thank you very much.
I've heard about a flashabe standalone zip for the hboot 2.15 and found this:
Only for S4!
Boot into bootloader and enable fastboot.
Code:
fastboot oem rebootRUU
Wait for the black screen with white HTC symbol. (Like when you flash a RUU)
then enter:
Code:
fastboot flash zip modded_hboot_YOUR_NEEDED_HBOOT.zip
then if you want
Code:
fastboot oem boot
(Boot into your current ROM)
modded_ = The red text is removed and "tampered" is gone in bootloader.
Download:
modded_hboot_1.06.0000.zip - (397.1 KB)
modded_hboot_1.09.0000.zip - (400.6 KB)
modded_hboot_1.13.0000.zip - (399.0 KB)
modded_hboot_1.14.0002.zip - (405.3 KB)
modded_hboot_1.14.0004.zip - (373.2 KB)
modded_hboot_1.14.0005.zip - (373.6 KB)
modded_hboot_2.15.0000.zip - (400.9 KB)
modded_hboot_2.16.0000.zip - (398.6 KB)
Thx goes to: touch of jobo XDA Post Source
DISCLAIMER:this is not my work. i have tested it on my own device,but use it at your own risk. if it melts your phone into a lil pile of goo,its not my fault.
Greetings by Idijt

[Q] Update to 4.4 ROM from 4.2 with old hboot

Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor. Currently service provider is Koodo - a division of Telus (in Canada).
CID: ROGER001
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!

arjundas86 said:
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor.
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
Click to expand...
Click to collapse
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON

LS.xD said:
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
Click to expand...
Click to collapse
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?

arjundas86 said:
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
Click to expand...
Click to collapse
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0

LS.xD said:
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
Click to expand...
Click to collapse
Thanks for the toolkit.
cid: ROGER001
Btw, what's the purpose of going SuperCID?
Also, I don't want to install lower hboot. I am on hboot 1.08 and I think I need to install hboot 2.15. Right?
I guess S-OFF isn't absolutely necessary, but would be nice to have. Would you recommend using the S-OFF command from the toolkit you linked?

I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
With superCID you can switch to other CIDs e.g. for unbranding your device Also it's needed for "Facepalm S-OFF" (Was the only working method for me)
Sent from my loved HTC One S using (most time buggy) Tapatalk

LS.xD said:
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe​
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29​
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29​
I would appreciate any insights into what would be the applicable RUU?
Thanks.

arjundas86 said:
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe​
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29​
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29​
I would appreciate any insights into what would be the applicable RUU?
Thanks.
Click to expand...
Click to collapse
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.

LS.xD said:
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
Click to expand...
Click to collapse
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?

arjundas86 said:
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
Click to expand...
Click to collapse
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.

LS.xD said:
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
Click to expand...
Click to collapse
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?

arjundas86 said:
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
Click to expand...
Click to collapse
To run a RUU NOT MATCHING your stock CID you need S-OFF // SuperCID. You cant install TMobile RUU at first :/
I would act like this:
Run latest Rogers RUU --> READ FACEPALM GUIDE CAREFULLY. There is how to gain SuperCID and then S-OFF. Once done you can change CID to whatever you want and run a (unbranded) RUU with HBoot 2.15.
But that is just what i thought about it. I suggest to let someone else CONFIRM the way suggested by me first.

Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware

@Rapier
thank you for the provided help as usual
Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed

LS.xD said:
...Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
Click to expand...
Click to collapse
For you? NO. You're better than me
The story is like this. I bought the phone in 2012. At that time, the highest hboot was 1.14 I believe (don't remember exactly) and there was no S-Off method available (they appeared later). There was something else tho. The lower hboots (1.09 and lower) permitted to write in the kernel partition or radio partition like an S-Off device. HTC then covered this in the higher hboots. So even if there was no S-Off method, there was a downgrade method that was used to downgrade the hboot from whatever you had to 1.09 or below. I downgraded mine to 1.06...don't ask why I didn't choose 1.09, I thought that was the RUU I considered to be fine for me at that time.
Now being on hboot 1.06 I can do anything except I cannot flash firmwares directly. So I cannot flash a new hboot with red letters removed for example. But I don't care about this...I can flash radios or kernels or splash screens like any S-Off user. The procedure for getting latest firmware and S-Off seems a little bit risky and I've read about alot of issues or problems from people who failed or tried countless times to reach that. So I've asked myself why should I do that if I don't need it?
Then it came the rumor and there were some brick cases of devices that were having some Android 4.3 ROMs and were not on latest firmware (in the meantime 2.13 and 2.15 hboots arise and also the S-Off method). It proved to be not the firmware fault after all. But CM team has included a check in the updater script of the ROM ZIP, to validate if the hboot was 2.13 or 2.15...if not, the flash won't happen. It's a simple assert command present there at the beginning of the script that do the check. As CM team was the pioneer in having the newest Android version ROMs available, everybody based initially their ROMs/builds on CM...so the check in the script was automatically carried over to all the ROMs out there. And it's still here.
As I've tested and I could run fine those ROM's (by removing the check before flash), I noticed that this requirement does not apply to everyone. Some could run fine the ROMs even if they're not on the "latest" firmware.
So that's why I am on 1.06...cause I don't know why should I go through some risky procedures when I don't need to.

Rapier said:
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
Click to expand...
Click to collapse
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
Rapier said:
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
Click to expand...
Click to collapse
I don't get what you're saying. It is still worth getting S-OFF, or it is not?

arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+

LS.xD said:
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
Just IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
Click to expand...
Click to collapse
Yes, you're right. That's what I meant. I will delete the updater-script lines that Rapier mentioned before trying to install CM11.
If it doesn't work, at least I can restore to my backup, without risk of bricking.
Then I can try the hboot update and s-off if required.
Thanks.

arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​...
Click to expand...
Click to collapse
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't want
arjundas86 said:
...I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
It's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
BUT, if you're NOT going to upgrade your firmware and you'll be lucky to have the ROM working, you won't need to S-Off since your current hboot is lower than 1.09 and allows you to flash radios and kernels directly from recovery.
And at this point, as you said, it worth a try like you are now and only if it's not working like this you should upgrade and do S-Off. I guess is much easier and less risky to remove 4 lines from that script and flash the ROM to see if it's working, than to go through the firmware upgrade & S-Off procedures

Rapier said:
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't wantIt's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
Click to expand...
Click to collapse
Hey Rapier,
I'm having trouble doing getting the zip signed.
I tried the zip signer you had in your guide, as well as a bunch of other zip signing programs, but none of them seem to do the job. I keep getting Error: Status 7.
Not getting bootloops or anything like that, so I was able to restore to my backup. No harm done.

Haven't messed with my phone since before s-off was available. Unsure how to proceed.

Current Situation(summary):
rooted
unlocked
S-on
HBOOT 1.14.0002
RADIO 0.19as.32.09.11_2
CID-11111111
Lastest TWRP installed 2.7.1.0
After attempting and failing s-off with Facepalm and Rumrunner as well as trying to get newer roms installed over the 4.2.2 rom
I had the S-on way.... had to do a factory reset because I could only get to the bootloader.
Now I have no ROM installed and can only get to bootloader and recovery. Device does show up under adb sideload and fastboot in the respective modes. cannot mount as a filesystem in TWRP for some reason
Not sure where to proceed from here to acheive s-off and get up to 4.4 aosp roms.
Do I need to update the firmware for any reason? Is there an old exploitable rom and Kernal that I can install that has good success with s-off? I'm just lost and frustrated so I'm asking for help.

bathnapkin said:
Current Situation(summary):
rooted
unlocked
S-on
HBOOT 1.14.0002
RADIO 0.19as.32.09.11_2
Unsure if superCID or not
Lastest TWRP installed 2.7.1.0
After attempting and failing s-off with Facepalm and Rumrunner as well as trying to get newer roms installed over the 4.2.2 rom
I had the S-on way.... had to do a factory reset because I could only get to the bootloader.
Now I have no ROM installed and can only get to bootloader and recovery. Device does show up under adb sideload and fastboot in the respective modes. cannot mount as a filesystem in TWRP for some reason
Not sure where to proceed from here to acheive s-off and get up to 4.4 aosp roms.
Do I need to update the firmware for any reason? Is there an old exploitable rom and Kernal that I can install that has good success with s-off? I'm just lost and frustrated so I'm asking for help.
Click to expand...
Click to collapse
I was in a similar situation a few days ago. In my case i couldn't boot into Android or recovery mode and the device was stuck in a reboot loop. I run RUU to reset everything to original factory settings. You have to relock your bootloader before you run RUU. It'll reset your root etc and you'll have to start from scratch. This link has the details:
http://forum.xda-developers.com/showthread.php?t=2593037
If you're on Mac or Linux use this one:
http://forum.xda-developers.com/showthread.php?t=1668156
Good luck.

Inn0vative1 said:
I was in a similar situation a few days ago. In my case i couldn't boot into Android or recovery mode and the device was stuck in a reboot loop. I run RUU to reset everything to original factory settings. You have to relock your bootloader before you run RUU. It'll reset your root etc and you'll have to start from scratch. This link has the details:
http://forum.xda-developers.com/showthread.php?t=2593037
If you're on Mac or Linux use this one:
http://forum.xda-developers.com/showthread.php?t=1668156
Good luck.
Click to expand...
Click to collapse
Thanks! this Is what I was hoping would help me. Unfortunately I've discovered I do have super CID "11111111"
currently trying to find a fastboot only script that can S-off me which i'm not sure even exists. Or just a way to revert the cid to whatever the AT&T one is

Inn0vative1 said:
I was in a similar situation a few days ago. In my case i couldn't boot into Android or recovery mode and the device was stuck in a reboot loop. I run RUU to reset everything to original factory settings. You have to relock your bootloader before you run RUU. It'll reset your root etc and you'll have to start from scratch. This link has the details:
http://forum.xda-developers.com/showthread.php?t=2593037
If you're on Mac or Linux use this one:
http://forum.xda-developers.com/showthread.php?t=1668156
Good luck.
Click to expand...
Click to collapse
bathnapkin said:
Thanks! this Is what I was hoping would help me. Unfortunately I've discovered I do have super CID "11111111"
currently trying to find a fastboot only script that can S-off me which i'm not sure even exists. Or just a way to revert the cid to whatever the AT&T one is
Click to expand...
Click to collapse
There's no need to run an RUU at this stage. Just downgrade to TWRP 2.6 and you'll be able to use the 'mount usb storage' feature again to copy a ROM zip across. Use the Kickdroid ROM and try Rumrunner s-off again.
The last thing you wanna do is change your CID back, then you'll be totally screwed. Just do what I said above and you should be fine.
Transmitted via Bacon

timmaaa said:
There's no need to run an RUU at this stage. Just downgrade to TWRP 2.6 and you'll be able to use the 'mount usb storage' feature again to copy a ROM zip across. Use the Kickdroid ROM and try Rumrunner s-off again.
The last thing you wanna do is change your CID back, then you'll be totally screwed. Just do what I said above and you should be fine.
Transmitted via Bacon
Click to expand...
Click to collapse
I managed to relock, run the 2.2 RUU, re-unlock and root again to get an unbricked stock phone. Facepalm didn't work so I'll give kickdroid and rumrunner a go.
EDIT: Kickdroid seems to require a firmware higher than the one I have to work which requires s-off for me to get without bricking. know of any older roms that are unsecure and rumrunner will work on?
Just got frustrated and did the RUU again. but this time I managed to get s-off! don't know what I did different this time but thanks to both of you!

bathnapkin said:
I managed to relock, run the 2.2 RUU, re-unlock and root again to get an unbricked stock phone. Facepalm didn't work so I'll give kickdroid and rumrunner a go.
EDIT: Kickdroid seems to require a firmware higher than the one I have to work which requires s-off for me to get without bricking. know of any older roms that are unsecure and rumrunner will work on?
Just got frustrated and did the RUU again. but this time I managed to get s-off! don't know what I did different this time but thanks to both of you!
Click to expand...
Click to collapse
Kickdroid only needs the newer firmware to stop signal loss problems and random reboots. You could have used it to get s-off. But you got it in the end!
Transmitted via Bacon

need help

hey guys. one problem.. i want to go back to stock ROM. i am supercid and s-off so i understood that i can use any RUU, but i downloaded one and failed because it says get the correct ROM update utility. i locked the bootloader too.
i have maximus hd atm , so which RUU should i use?
Hboot 2.16
Radio 1.20
supercid
s-off

Did you run the ruu while your phone was in fastboot mode? Otherwise the downgrade won't work.
Edit: As you already said, it doesn't matter which ruu you take since your phone is S-OFF. If you try to run an ICS ruu be sure not to install OTAs if you're on superCID or you're going to brick your phone.