Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.
Have you changed your CID?
mag13 said:
Have you changed your CID?
Click to expand...
Click to collapse
Please read again.
I was Super CID (11111111) but easily changed it to match TMobile (T-MOB010) with this tool for the update.
Click to expand...
Click to collapse
yooouuri said:
Please read again.
Click to expand...
Click to collapse
I am on Super CID and it does not work
mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
You have to change your CID back to the one for your RUU.
Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4 after I flashed MaximusHD and firmware?
Now my phone is like this:
Hboot 2.16
Radio 1.20.50 (worst radio ever)
S-OFF
CID 11111111
The rom's with sense 5 (I tried just maximus because the others are not compatible with the new firmware, the sdcard mount point for multi user) are killing my battery more than twice faster compared with ViperS. 2h Display vs 5h on Viper.
Thank you!
Can we use this as rollback from h-boot 2.16 ?
mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
I didn't think it would. Glad you didn't brick your phone and I'll update the OP based on your experiment.
flow27 said:
Can we use this as rollback from h-boot 2.16 ?
Click to expand...
Click to collapse
arazvan2002 said:
Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4
Click to expand...
Click to collapse
Upgrading your hboot is a one way street, as far as I know. Can't you change the radio to something else?
I flashed Viper ROM. All the things are ok, gsm, wifi, etc just I can't see the internal memory like I should. I can browse to it file es file explorer but I need a method to default mount the new (4.2.2) location of it. Where is mounted by the internal memory in 4.1 JB? I discovered a file vold.fstab. Maybe I can change something like that somewhere to be able to use 4.1 ROM's again.
Sorry for OFF topic.
Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?
yooouuri said:
Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?
Click to expand...
Click to collapse
Yes you can if youre s-off.
Sent from HTC One S using android 4.2.2 sense 5
Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?
yooouuri said:
Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?
Click to expand...
Click to collapse
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?
tivofool said:
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?
Click to expand...
Click to collapse
That's the right thing to do, yes?
kilo94 said:
That's the right thing to do, yes?
Click to expand...
Click to collapse
Yes
I have the same problem. I can't go back to stock. I haven't changed my CID yet but I see that has not worked for you.
Did you try with HTC__001 ?
dhigby said:
Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.
Click to expand...
Click to collapse
Hey I used your instructions and everything was perfect thank you. I used to upgarde and downgrade hboot even to restore the HTC one S
I got the RUU "Error: 159" again with both RUU from first post and testet with each common cid, but at the end I only got success with super cid and the TMO_US Ruu.
Now I am back on Hboot 2.15 and can flash again the newest custom-recovery, thank you very much.
I've heard about a flashabe standalone zip for the hboot 2.15 and found this:
Only for S4!
Boot into bootloader and enable fastboot.
Code:
fastboot oem rebootRUU
Wait for the black screen with white HTC symbol. (Like when you flash a RUU)
then enter:
Code:
fastboot flash zip modded_hboot_YOUR_NEEDED_HBOOT.zip
then if you want
Code:
fastboot oem boot
(Boot into your current ROM)
modded_ = The red text is removed and "tampered" is gone in bootloader.
Download:
modded_hboot_1.06.0000.zip - (397.1 KB)
modded_hboot_1.09.0000.zip - (400.6 KB)
modded_hboot_1.13.0000.zip - (399.0 KB)
modded_hboot_1.14.0002.zip - (405.3 KB)
modded_hboot_1.14.0004.zip - (373.2 KB)
modded_hboot_1.14.0005.zip - (373.6 KB)
modded_hboot_2.15.0000.zip - (400.9 KB)
modded_hboot_2.16.0000.zip - (398.6 KB)
Thx goes to: touch of jobo XDA Post Source
DISCLAIMER:this is not my work. i have tested it on my own device,but use it at your own risk. if it melts your phone into a lil pile of goo,its not my fault.
Greetings by Idijt
Related
DO NOT FLASH A NEW RUU OR OFFICIAL ROM IMAGE UNLESS YOU *REALLY* KNOW WHAT YOU ARE DOING !
The title says it all!
Doktaphex said:
As the title suggests, this is warning against flashing the new RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_ 26.04.02.17_M2_release. It contains a new version of HBoot that breaks root and standard S-OFF! Please refer to these threads for more info:
http://forum.xda-developers.com/showthread.php?t=879375
http://forum.xda-developers.com/showthread.php?t=875099
You may be safe if you have full radio S-OFF and SuperCID but this is unconfirmed, and I would steer well clear until the DEVs have cracked open this latest HBoot.
Click to expand...
Click to collapse
Confirmed:
Only if you have full radio S-OFF you can 'downgrade' to 1.32xxxxxx and root
Yes, I can confirm that, too. You have to have Super-CID (Radio S-OFF) to downgrade. Rooting is not possible in this new one. Yet.
Can please someone explain me what's the real difference between ENG S OFF But CID 11111 and SHIP S OFF and CID HTC....?
ENG S-OFF: It is engineering bootloader S-OFF (may include Radio S-OFF). Allows custom bootloader commands, for example radio flashing, also allows to install custom roms.
SHIP S-OFF: Radio S-OFF, does not allow radio flashing, but allows ClockworkMod flashing. Usually comes together with SuperCID.
CID 11111111: Super-CID, Super Carrier ID, allows you to downgrade, and flash really anything to the phone without the phone saying "no thanks".
CID HTC__xxx: HTC Carrier ID, does not allow downgrading via RUU, but you can still flash through ClockworkMod if you are S-OFF.
Thank you very much for this answer..I ask because i cannot find this information somewhere in one post!
I am with ENG S-OFF and CID 11111111
So i can flash the new RUU and i am able to revert back to 1.32xxxxxx and root again.Correct?
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Yeah but it needs clockworkmod, which goes away if people use the actual RUU. Also flashing system.img does not replace the bootloader, so S-OFF stays in fine (also hboot S-OFF).
How can you tell what your CID is?
madindehead said:
How can you tell what your CID is?
Click to expand...
Click to collapse
Bootloader > Fastboot > System Info (or something like that)
If you are SuperCID then it is 11111111 if not, then it begins with HTC_xxxx
looks like also this RUU_Ace_Orange_ES_1.75.75.2_Radio_12.28e.60.140f_2 6.04.02.17_M2_release also seems to stop you gaining root and fix's patched Hboot as someone saying he flashed the rom and can't gain root.
joners said:
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Click to expand...
Click to collapse
can you tell how to extract the system.img from rom?
all i get is a [0] file. dont know what to do with it.
[HOW TO SAFELY FLASH THE NEW ROM AND BE ABLE TO REVERT BACK]
Currently, the new ROM (1.72.405.3) has a new HBOOT (so you can't install ENG HBOOT S-OFF) and is difficult to root (not as simple as it is with previous ROMs). However, it also has a better radio, and a faster ROM with various bugfixes. This ROM is also Android Froyo v2.21. If you want to try out the new ROM, whilst maintaining the ability to 'revert' back to your older, hackable state then follow the below instructions carefully. Also, do not worry about extracting system.img files and whatnot.
*It is recommended to do a NANDROID BACKUP first
*All RUUs can be obtained from www.xdafil.es/DesireHD/RUU/
*If you don't do steps 1-3 properly and flash the new ROM, you will not be able to revert back
*Radio S-OFF and SuperCID can be obtained by following instructions in this thread: http://forum.xda-developers.com/showthread.php?t=857537
*Tutorial for flashing RUUs (needed for steps 4 & 8): http://forum.xda-developers.com/showthread.php?t=841890
1. Install Radio S-OFF (NOT ENG HBOOT S-OFF) and SuperCID
2. Go to bootloader, then System Info. (If System Info is not there, but you have SHIP S-OFF skip step 3 and proceed to step 4)
3. Make sure CID is 11111111 *AND* the bootloader shows S-OFF. If not, repeat step 1
4. You can now flash the new ROM (1.72.405.3)
5. This will remove ENG HBOOT (if you had it) and ClockworkMod
6. If you did steps 1-3 correctly, your Desire HD should still be S-OFF. Go to bootloader and check. If not, you did not do steps 1-3 correctly and will have to wait for the new HBOOT to be cracked.
When you are done with the new ROM and want to go back, follow the instructions below:
7. Download the HTC RUU 1.32.405.6 of your choice (Since you are SuperCID you can flash any RUU)
8. Flash it to your Desire HD
9. Root your ROM using Visionary, and install ROM Manager and flash ClockworkMod. You can optionally install ENG HBOOT S-OFF now if you like.
If you made a NANDROID Backup, you can restore this now from ClockworkMod
joners said:
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Click to expand...
Click to collapse
I can't get this to work myself, unfortunately.
joners said:
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Click to expand...
Click to collapse
I have this working. The supplied .zip file does not include Superuser.apk. After following the instructions and then installing Superuser from the market I now have root on this rom.
Look forward to testing it over the next couple of days while I lay in hope of some custom roms based off this version.
EDIT: Superuser keeps force closing
My bootloader says
ACE PVT ENG S-OFF
HBOOT-0.85 2007 (PD9810000)
and system info says
CID-11111111
Am I good to go or shall I do something else?
Thank you for sharing info.
doh!
being used to the days of winmo I flashed this rom over my cyanogen taking a backup first.
Now I can't revert back to the old stock rom, any way of doing this (easily ish)?
Hi, I'm ENG S-Off but my CID is not 1111111, what's the safest way to do the Super-CID?
I'm stucked abroad using a **** phone cos I can't use another sim in my DHD
Sent from my Desire HD using Tapatalk on Revolution 1. 92
ninja.rogue said:
My bootloader says
ACE PVT ENG S-OFF
HBOOT-0.85 2007 (PD9810000)
and system info says
CID-11111111
Am I good to go or shall I do something else?
Thank you for sharing info.
Click to expand...
Click to collapse
Also on the same boat...
Anyone??
ninja.rogue said:
My bootloader says
ACE PVT ENG S-OFF
HBOOT-0.85 2007 (PD9810000)
and system info says
CID-11111111
Am I good to go or shall I do something else?
Thank you for sharing info.
Click to expand...
Click to collapse
looks like you are, you have superCID.
Hey guys
I've got a bit of a situation. A friend of mine gave me this sensation (carrier T-mobiel) wich was all but bricked. Since I have some experience rooting and flashing custom ROMs, he asked me to give it a try at reviving it.
The owner had been messing around a bit himself and he managed to install clockwordmod recovery. Don't know if he installed any ROM, the device gets stuck on splashscreen.
I did the following; full format, superwipe and install a ARHD ROM. result was te same; stuck on splash-screen.
Then I did another full format, wipe and installed Cyanogenmod, still the same result.
I wanted to try and install 4EXT touch recovery, but the device doesn't respond to any USB connection method so ADB won't work. there's no working ROM so installing through the app won't go either. basicly, I don't know if there's a way to uninstall and install a recovery through flashing.
I have another phone to use to store required files on a SDcard.
these are the things dat DO work:
Bootloader, fastboot and clockworkmod recovery v5.8.0.9
this is the device's bootloader information
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
RADIO-10.14.9035.01_M
Aug 2 2011, 22:35:52
my guess is that I'm trying to install ROM's that don't work with the current firmware. I don't know if the owner installed the OTA ICS before he got these problems. But I don't know what firmware is currently on this this device, and how to check it.
Lost for clues here and calling out for help
Onemanshow
onemanshow85 said:
Hey guys
I've got a bit of a situation. A friend of mine gave me this sensation (carrier T-mobiel) wich was all but bricked. Since I have some experience rooting and flashing custom ROMs, he asked me to give it a try at reviving it.
The owner had been messing around a bit himself and he managed to install clockwordmod recovery. Don't know if he installed any ROM, the device gets stuck on splashscreen.
I did the following; full format, superwipe and install a ARHD ROM. result was te same; stuck on splash-screen.
Then I did another full format, wipe and installed Cyanogenmod, still the same result.
I wanted to try and install 4EXT touch recovery, but the device doesn't respond to any USB connection method so ADB won't work. there's no working ROM so installing through the app won't go either. basicly, I don't know if there's a way to uninstall and install a recovery through flashing.
I have another phone to use to store required files on a SDcard.
these are the things dat DO work:
Bootloader, fastboot and clockworkmod recovery v5.8.0.9
this is the device's bootloader information
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
RADIO-10.14.9035.01_M
Aug 2 2011, 22:35:52
my guess is that I'm trying to install ROM's that don't work with the current firmware. I don't know if the owner installed the OTA ICS before he got these problems. But I don't know what firmware is currently on this this device, and how to check it.
Lost for clues here and calling out for help
Onemanshow
Click to expand...
Click to collapse
Hi,
2 things you can try.
1.Run a GingerBread RUU.
Look HERE
2.If that works,try s-off.
Look HERE
Then,you could change firmwares and do whatever you like.
Hi Malybru,
I understand what you suggested and I'm currently working on it. Only I can't find the right RUU for this phone.
Current CID is: T-MOB003
getting it superCID'd was no go since I can't get it S-OFF with the revolutionary utility. is there another way to S-OFF the phone besides revolutionary?
edit: I downloaded and executed a RUU that apearantly wasn't compatible with the phone. I'm guessing it removed whatever ROM was installed, but didn't install the ROM from the RUU.
I also followed step 3; RUU to restore stock up to the part of relocking the bootloader. I didn't come any further cause I can't find the right RUU.
the phone now only boots into bootloader with "security warning" displayed below "relocked".
I'm guessing, if I find the correct RUU with gingerbread, things will be okay again.
on a sidenote, does a RUU install also returns the recovery to stock?
onemanshow85 said:
Hi Malybru,
I understand what you suggested and I'm currently working on it. Only I can't find the right RUU for this phone.
Current CID is: T-MOB003
getting it superCID'd was no go since I can't get it S-OFF with the revolutionary utility. is there another way to S-OFF the phone besides revolutionary?
Click to expand...
Click to collapse
Hi,
RUU does not matter too much as long as it is Europe and GB.
If you can find a dutch tmo ,then even better.
No harm will come if it is the wrong one.
It will only throw up an error.
This will at least get a ROM on your phone,so that you can s-off .
Revolutionary is the easiest way to s-off.
so, to summarize:
the RUU has to be TMO for either UK or EU. Does the radio need to match the one that's currently displayed in the bootloader?
onemanshow85 said:
so, to summarize:
the RUU has to be TMO for either UK or EU. Does the radio need to match the one that's currently displayed in the bootloader?
Click to expand...
Click to collapse
Hi,
The closer the match,the more chance of success.
But close will do.
Yes,with the same radio.
finding a dutch RUU with this radio for TMO is pretty challenging. So I tried it with a german version (DE). Other then that it matches the radio, and the carrier.
the first method through the RUU.exe failed, it tells me to get the right RUU for my carrier/phone.
So I tried it through flashing with a SDcard. I changed the CID in the notepad file in the PG58IMG.zip to T-MOB003. In bootloader, it checks the file twice and after that nothing happens, the regular bootloader screen is prompted.
Then I tried to flash it through fastboot CMD command, pretty much my last option according to the guid you linked me. This also fails with the notification that it failed to verify 12 signatures.
now I found some universal firmware packages but they don't seem to contain any ROM and recovery, only firmware. are there any of these universal packages as complete RUU?
or is there a way to bypass the signature check with a fastboot command?
onemanshow85 said:
finding a dutch RUU with this radio for TMO is pretty challenging. So I tried it with a german version (DE). Other then that it matches the radio, and the carrier.
the first method through the RUU.exe failed, it tells me to get the right RUU for my carrier/phone.
So I tried it through flashing with a SDcard. I changed the CID in the notepad file in the PG58IMG.zip to T-MOB003. In bootloader, it checks the file twice and after that nothing happens, the regular bootloader screen is prompted.
Then I tried to flash it through fastboot CMD command, pretty much my last option according to the guid you linked me. This also fails with the notification that it failed to verify 12 signatures.
now I found some universal firmware packages but they don't seem to contain any ROM and recovery, only firmware. are there any of these universal packages as complete RUU?
or is there a way to bypass the signature check with a fastboot command?
Click to expand...
Click to collapse
Hi,
Try the European RUU with the 10.14 radio that matches yours.
Add your CID in the PG58IMG text file.
Make sure you have the phone in fastboot when you attach your USB cable(it should say "fastboot USB"),and start running the RUU from your PC.
http://db.tt/A7lS7PaD
Here is a link to 4ext touch recovery as a IMG. http://db.tt/KFKpcrhB and here is a pg58img.zip. put the zip file onto the sdcard and boot to boot loader. It will hopefully flash the recovery. If not fast boot flash the IMG. Once you have the recovery installed enable smart flash and then flash the roms. Hopefully that will work for you
Sent from my HTC Sensation using xda premium
tnx for the files.
I tried the suggestions you made but flash from sdcard doesn't work; it checks the file once and doesn't do anything after it.
when I try to flash either one of the files through fastboot I get signature verification fail.
my bootloader says RELOCKED, I got that after following step 3.1 in the RUU flash guide to return to stock. I don't know if this is blocking anything from being flashed with the nasty signature notifications?
also, most like because nothing is installed on my device, when I plug in the USB cable when it's turned off, it automatically swithces on displaying SECURITY WARNING below RELOCKED.
Damn, wasn't fast enough. I'm not sure what the best way to approach this is. Either attempt to full s-off the device with revolutionary/ jupuntobear, or re-unlock your boot loader with htcdev, then fastboot flash the recovery. Then install the rom. Then run jupuntobear to full s-off
Sent from my HTC Sensation using xda premium
heavy_metal_man said the right thing. First focus on unlocking it on hTCdev.com and afterwards, flash a 4Ext Recovery to make things easyer. Then put the device in bootmenu (not in the Graphic shell) and attach a USB, start any Official European RUU that is Gingerbread - with 1.50 in the numbers.
an update
I managed to get it unlocked again with htcdev.com. After that I flashed 4EXT recovery, succesfully.
only thing now I need to do is installing a ROM. I tried the following without succes so far:
with RUU
I can't find a dutch RUU for TMO with radio 10.14.9035 anywhere so I tried the closest match possible, a german one. through the .exe method I get incompatibility errors. So I extracted the ROM/.zip, added my CID and tried with SDcard flash and fastboot flash, both unsuccesfull. Hboot checks the file twice and does nothing afterwards, and fasboot prompts the message "FAILED (remote ** unknown fail)"
Universal firmware package to make sure I'm on 3.32, so I can install ARHD 6.7.2 or any other ICS rom
I took one from http://forum.xda-developers.com/showthread.php?p=21711154#post21711154.
I get the same errors as when I was trying to flash the ROM.zip from the RUU, both with sdcard flash and fastboot flash.
a random Gingerbread ROM
I found this GB ROM http://forum.xda-developers.com/showthread.php?t=1226564.
I installed it through EXT4. after a reboot it's stuck in a bootloop. No splash screen is shown however, it get's to the withe-field-green-HTC-screen and reboots after, showing the same.
I don't understand what's wrong. I got a good recovery now and the bootloader is unlocked. For some reason the ROM's I tried are incompatible with the current state of the device and I can't figure out why. are dutch T-mobile branded phones so tough to crack or what?
also, after a certain step wich I can't remember, my bootloader doesn't display a radio anymore.
Current bootloader:
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
eMMC-boot
Aug 2 2011,22:35:52
EDIT: I would be less restricted in my actions if the damn thing were to be S-OFF. is there any way to get get S-OFF through bootloader/fastboot? All the S-OFF methods and utillities I found so far need the device to have a ROM running.
SOLVED
with help of KGS1992, I managed to restore the device.
- installed a stock GB ROM since I was on hboot 1.18, and to get root acces
- aquired root through adb
- gained S-off with revolutionary
reason why I couldn't manage this before is because I didn't have a genuin stock ROM.
tnx all for the help
onemanshow85 said:
SOLVED
with help of KGS1992, I managed to restore the device.
- installed a stock GB ROM since I was on hboot 1.18, and to get root acces
- aquired root through adb
- gained S-off with revolutionary
reason why I couldn't manage this before is because I didn't have a genuin stock ROM.
tnx all for the help
Click to expand...
Click to collapse
Glad you got sorted pal and thanks for letting us know
Hi im new to htc and bootloader and all this stuff.
when i had galaxy s2 i knew everything about it. (download, recovery)
so here is what i need to know:
1.can i create a NAND backup of a stock rom and restore to it if i have s-on?
2.what doe's ***tampered*** in bootloader mode means?
3.when i flash a custom rom and i extract the boot.img do i have to remove it from the zip file itself?
Thanks for any HELP!!!!
LSGio said:
Hi im new to htc and bootloader and all this stuff.
when i had galaxy s2 i knew everything about it. (download, recovery)
so here is what i need to know:
1.can i create a NAND backup of a stock rom and restore to it if i have s-on?
2.what doe's ***tampered*** in bootloader mode means?
3.when i flash a custom rom and i extract the boot.img do i have to remove it from the zip file itself?
Thanks for any HELP!!!!
Click to expand...
Click to collapse
1. No, if you have S-ON you can't create a NAND backup as you don't have a custom recovery.
2. ***TAMPERED*** means that an app or apps have gone into your /system/ partition, thereby triggering the tampered flag. You can remove this message by running a HTC RUU.
3. No, you first flash the zip file with the boot.img inside, then flash the boot.img in the bootloader. fastboot flash boot boot.img
1.i do have a custom recovery which i flashed with all in one kit. (i was able to flash it because i unlocked the bootloader but i dont know what s-off means and also supercid)
so can i do a nand backup of a stock rom and restore to it?
and i also wanted to know how to s-off and what are the differences between s-off and supercid?
LSGio said:
1.i do have a custom recovery which i flashed with all in one kit. (i was able to flash it because i unlocked the bootloader but i dont know what s-off means and also supercid)
so can i do a nand backup of a stock rom and restore to it?
and i also wanted to know how to s-off and what are the differences between s-off and supercid?
Click to expand...
Click to collapse
Then yes you can make a backup and restore later. Just always full wipe, cache and dalvik cache wipe.
As far as flashing kernels/boot.img, if you are < hboot 1.13 then just flash via recovery. If your hboot is > or = to hboot 1.13tjen flash via fastboot or flash img GUI (available in the play store and in various threads).
And as of right now there is no s-off for the one s.
Sent from a baked One S
If I've helped hit the thanks button
LSGio said:
1.i do have a custom recovery which i flashed with all in one kit. (i was able to flash it because i unlocked the bootloader but i dont know what s-off means and also supercid)
so can i do a nand backup of a stock rom and restore to it?
and i also wanted to know how to s-off and what are the differences between s-off and supercid?
Click to expand...
Click to collapse
S-Off means you have full access to all firmware partitions of the phone (I think, correct me if Im wrong). You can unlock the boot loader to gain access to the relevant partitions to flash a custom ROM even with S-ON.
The phone CID just represents the region it is from. For example HTC_TMOUS is for the One S used on the US T-Mobile network. When the phone checks for updates, it only downloads the one's relevant to the CID. SuperCID is 111111111 and represents the "developer" region you can download or run any update on a One S with super CID.
KACE321 said:
S-Off means you have full access to all firmware partitions of the phone (I think, correct me if Im wrong). You can unlock the boot loader to gain access to the relevant partitions to flash a custom ROM even with S-ON.
The phone CID just represents the region it is from. For example HTC_TMOUS is for the One S used on the US T-Mobile network. When the phone checks for updates, it only downloads the one's relevant to the CID. SuperCID is 111111111 and represents the "developer" region you can download or run any update on a One S with super CID.
Click to expand...
Click to collapse
Is that means that if i have supercid i can run any ruu?
if this is the meaning so how do i supercid my one s?
LSGio said:
Is that means that if i have supercid i can run any ruu?
if this is the meaning so how do i supercid my one s?
Click to expand...
Click to collapse
fastboot oem writecid 11111111
usaff22 said:
fastboot oem writecid 11111111
i have 2 questions:
1.how many 1's do i have to write
2.can i get back to my cid and how?
Click to expand...
Click to collapse
Yes, you can make nand backups and restore them if you have a custom recovery. You don't need to have s-off for that but you do need to have your bootloader unlocked. Depending on your hboot version, restoring a nand backup will not restore your boot image. (1.09 and below will, 1.13 and up won't.) We do now have the means to downgrade hboot tho.
You get the *tampered* line if your recovery is unsigned. When you use a custom rom, you will most likely also get a red warning text over your boot splash. It's normal.
You have to extract the boot image from the rom zip and flash it in fastboot before you boot the new rom. This may even be before you flash the new rom. You can leave the rom zip unchanged and flash it in recovery.
-Jobo
if ill do a nand it will back up the boot img but wont restore it because of my hboot version?
Oh and one more thing when i rooted my htc with the supersu zip than after 2 days it asked for mksh premissions and than when i rebootedy phone it was stuck in recovery and then i fixed it with a wipe but how can i prevent this from hapenning and why does it hapenned?
Sent from my HTC One S using xda app-developers app
LSGio said:
if ill do a nand it will back up the boot img but wont restore it because of my hboot version?
Click to expand...
Click to collapse
Correct. On old hboots, pretty much everything except sbl and hboot is writable in recovery or even while fully booted. On newer hboots, most is read-only. Boot image can be flashed in fastboot but radio and other stuff can not.
LSGio said:
Oh and one more thing when i rooted my htc with the supersu zip than after 2 days it asked for mksh premissions and than when i rebootedy phone it was stuck in recovery and then i fixed it with a wipe but how can i prevent this from hapenning and why does it hapenned?
Click to expand...
Click to collapse
The mksh root request is a known thing. You can search the forums for it to read some opinions. As far as I know not yet properly explained why it happens but harmless. It is not related to getting stuck in recovery, altho I have no idea what caused that for you.
touch of jobo said:
Correct. On old hboots, pretty much everything except sbl and hboot is writable in recovery or even while fully booted. On newer hboots, most is read-only. Boot image can be flashed in fastboot but radio and other stuff can not.
The mksh root request is a known thing. You can search the forums for it to read some opinions. As far as I know not yet properly explained why it happens but harmless. It is not related to getting stuck in recovery, altho I have no idea what caused that for you.
Click to expand...
Click to collapse
can you please tell me how can i download an ruu that matches my stock rom. cause when i get to the filefactory server it tells me that i need to buy premium because the file is larger than 500MB.
and the link to the ruu downloads is from this thread:
http://forum.xda-developers.com/showthread.php?t=1543588
if youll go to the first page and click the (ville S4) link you will see a list of ruu's but i can't download them because the size of them is larger han 500mb and i need premium.
This is for International hTC One XL/Evita - Hboot 2.14 & firmware 3.17 (Orange UK)
If you own AT&T One X please look elsewhere, this guide is not for your phone
There is an abundance of information scattered in these forums and not all root methods/exploits work universally due to variation in firmware builds and Hboots.
I had to read a lot of threads to figure out how to S-off my Orange UK One XL with Hboot 2.14 and firmware build 3.17.
I was only interested in attaining S-off but had to start with HTCDev bootloader unlocking which I didn't really want to do but none of the known root exploits worked on my firmware.
I am sharing this hoping it would help others avoid taking pills for headaches when pursuing this noble quest
AIM:
Provide a short guide to others with similar device and configuration on where to start and simple clear steps to follow with needed links.
PREREQUISITES:
1. latest htc drivers for your Windows PC/laptop if you have one of those. Check here.
2. a working adb environment preferably from latest Android SDK, if you don't have this already set up please check here.
3. "USB debugging" must be checked under Phone settings>Developer options
4. an original htc USB cable is strongly recommended.
5. phone charged at above 50%
6. basic knowledge of using command prompt (cmd) in Windows and adb commands.
STEPS:
So in my case the steps were:
[1] Unlock bootloader through htcdev.com
[2] Flash/install TWRP recovery
This is done manually. All-In-One Toolkit didn't work for me BTW.
1. download latest TWRP recovery for One XL/Evita from here
2. you can rename file for easier command prompt typing later, like TWRP5.img
3. place file recovery file in your adb/fastboot folder
4. connect phone in fastboot mode to PC, make sure it displays fastboot USB on phone before you proceed.
5. start command prompt from within fastboot folder by right clicking inside folder and choosing "open prompt here", type following command:
Code:
C:\yourFastbootFolder> fastboot flash recovery TWRP5.img
Not a bad idea to test your recovery by making a nandroid backup before proceeding to next step.
[3] Flash a custom rom (root)
All custom roms are rooted by definition. If you chose e.g. ViperXL like I did remember to flash boot.img extracted form same rom zip afterwards, otherwise bootloop!
You can of course flash a SuperSU zip instead to gain root but I don't see the point.
[4] SuperCID
This is the simplest way that I found accidentally during my endless searches, all credit goes to @beaups for this one and @Austempest for sharing :good:
1. connect phone to PC in Android mode (mode where you can use phone)
2. Run the following command from command prompt (CMD):
Code:
C:\>adb shell
To enter adb shell, then enter following commands after each other:
Code:
# su
# echo -ne "11111111" | dd of=/dev/block/mmcblk0p5 bs=1 seek=20
3. Reboot to bootloader and hopefully you'll see 11111111 as your CID ...... yes
[5] S-Off
Now that your are rooted with SuperCID you can just follow @beaups simple steps for S-Off found here Facepalm S-Off
That is it.... you broke your shackles :laugh:
I am not a dev and for sure not taking credit for other people's work, merely giving back and hoping this assists clarify stuff and save some time.
Cheers!
the one clicks would not work for you because you dont have an att one x so the supercid exploit doesnt work on our phones
all phones go through htcdev.com to unlock, att phones just need supercid first.
you should make a not in your guide that this guide wont work for at&t phones.
exad said:
the one clicks would not work for you because you dont have an att one x so the supercid exploit doesnt work on our phones
all phones go through htcdev.com to unlock, att phones just need supercid first.
you should make a note in your guide that this guide wont work for at&t phones.
Click to expand...
Click to collapse
Thanks for this important reminder, note added in red on top!
You mentioned one click is only for AT&T phones, I guess you mean All-In-One Toolkit by hason2000, you see even in the tool's thread it's not stated explicitly that tool works only for AT&T, while the respective threads for these exploit state that it's for AT&T One X not negating other international versions!
Most guides/tools are for North America and some Australia but very few for Europe which BTW only recently came on board with 4G/LTE.
So figuring out, especially for noobs, what is what with all these international variations for one device and huge amount of information, while searching doesn't always provide an answer is a tedious task and can end up miserably :crying:
I hope it's in order to add some info for European Evitas
guys kindly don't quote whole post(s), thanks
Only AT&T Phones are different in the case of unlocking/rooting because they can't use HTCDEV. Every other onexl is the same for unlocking/rooting.
Great guide, thanks you! it worked !
Now i'm stuck at the next step. ha :crying:
i cant get root, because my touchscreen not functional after flashed a custom rom. i had success until step 3, i cant proceed to step 4 as i cant use my touches when the rom loaded. i didnt have any back up. i already searched around to dgrade my touchscreen firmware, but it needs root. im stuck here, i can flash custom cwm recovery, install custom rom but cant touch screen. the default cm10.1 dont have android debugging enabled by default, i cant enable it cos i cant touch the screen. if i restore to stock ruu, i can touch screen n all works, but i had a problem sync google contacts.
The reason im getting my hands on custom rom is bcos my stock XL(Asian version) will neve sync google contacts properly, i tried to flash JB stock RUU, but its same. then, i started to tamper my fon with unlocking bootloader via htcdev, flash cwm(twrp mess on my sdcard storage). i had experience on older htc devices but its my 1st time on the htc one series. right now, im on evita s-on, unlocked bootloader, hboot 2.14, cwm recovery(twrp mess on my sdcard storage), not-super CID. I 'm left with a non-touchable cm10.1, i can flash any rom that supports s-on. tried to relock bootloader but i cant flash stock ICS ruu.flashing stock JB RUU is ok. my target now is to s-off n superCID.
i can :
flash RUU 3.17, running a stock RUU 3.17.
unlock bootloader
flash custom recovery(twrp mess with my internal storage)
i cant :
root my device on stock rom
touchscreen wont work on custom rom
any help will b greatly appreciated.
Do not make multiple posts about the same thing. It is strictly against XDA rules.
sorry, may i know how to delete it? i click on edit/delete but cant see any options to delete my post.
You cannot
Sent from my One X using xda app-developers app
sir how to back or normal cid help me
sir how to back or normal cid help me i have a one x its allredy super cid how get back normal cid
Fastboot oem writecid whateveryourcidwas
This will only work once with s-on after supercid but will work as many times as you want if s-off.
Sent from my One X using xda app-developers app
ignore this post. found a relevant thread
How to upgrade bootloader to 2.14
So what if you are not on HBoot 2.14?
EDIT:
Warning: It is not a good idea to upgrade only the bootloader if you intend to flash the latest CM10 builds! Avoiding RUU and unlocking again out of laziness will probably get you in trouble afterwards. RUU is definitely the safer way. You'll find a good collection of ROMs here
http://forum.xda-developers.com/showthread.php?t=2119610
and the tutorial for upgrading RUU on a previously modded phone here
http://forum.xda-developers.com/showthread.php?p=26260005
I found these threads which helped me SuperCID, S-Off and finally upgrade the HBoot of my already rooted evita.
First you need the superCID from this post:
http://forum.xda-developers.com/showthread.php?p=42351491
Next Step S-Off:
http://forum.xda-developers.com/showthread.php?t=2155069
Then RegawMOD the appropriate bootloader from this thread and flash:
http://forum.xda-developers.com/showthread.php?t=1786498
The procedure was easy once I had found the appropriate threads on XDA
You should not update hboot that way. It only updates one file and not all the firmware files. Ruu or flashing firmware.zip are the best ways.
Sent from my HTC One XL using xda app-developers app
New CM10 and derivates require HBoot 2.14
exad said:
You should not update hboot that way. It only updates one file and not all the firmware files. Ruu or flashing firmware.zip are the best ways.
Click to expand...
Click to collapse
I simply needed an updated bootloader in order to enable flashing the latest CM10 nightlies. This did the job.
ernstlustig said:
exad said:
You should not update hboot that way. It only updates one file and not all the firmware files. Ruu or flashing firmware.zip are the best ways.
I simply needed an updated bootloader in order to enable flashing the latest CM10 nightlies. This did the job.
Click to expand...
Click to collapse
That's exactly why you should not do it that way. You may get issues along the way as a result of the software not properly utilizing your hardware. This is why you're supposed to update hboot. What you did is more like tricking it into thinking you updated the firmware.
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
ernstlustig said:
I simply needed an updated bootloader in order to enable flashing the latest CM10 nightlies. This did the job.
Click to expand...
Click to collapse
As exad said, CM 10 didnt want you to update just the hboot it wanted you to flash 3.18 RUU or equal to get updated firmware.
The requirement to install 3.18 RUU is listed as a requirement for CM. The hboot is what is checked but things like radio, adsp and wcnss are what actually needed to be updated, which you have not updated.
All you have successfully done is beaten the basic check for if you flashed the 3.18 RUU without actually doing what you were told to do.
How did you get s-off? i have a rogers version
salt204 said:
How did you get s-off? i have a rogers version
Click to expand...
Click to collapse
Links to XDA threads updated. (Sorry.) Please look again.
Has anyone tried successfully to write SuperCID into hboot 2.15 S-On devices?
as the instructions is for hboot 2.14, and I would like to S-Off the device with hboot 2.15 and it is S-On.
I have tried the hex with adb method, but it doesn't work.
Recently I tried out a custom rom on my T-mobile branded One S, but I want to revert back to stock in order to do a S-OFF.
Before flashing the custom rom I ran the latest official t-mobile firmware, non rooted, original recovery, h-boot 2.16 and radio 1.15, S-ON. I unlocked the phone with an HTC-dev unlock token, flashed TWRP recovery and flashed a custom rom but left the phone S-ON.
Now I want to revert back to stock so I can do a S-OFF (which is needed for certain roms). I picked a RUU corresponding my CID t-mob101, in this case the only one I could find was:
Code:
RUU_Ville_U_TMO_DE_1.77.111.5_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_259421_signed.exe
I wanted to try this one, but the download link is dead:
Code:
RUU_Ville_U_ICS_40_S_TMO_DE_2.38.111.10_Radio_1.09 es.50.02.07_2_10.09d.50.04L_ver2_release_287723_si gned.exe
I flashed back the original recovery, relocked the phone and tried to run the RUU. However when running the RUU I get an 155 error, which means the RUU isn't corresponding to my CID?
Does this mean i'm out of any options reverting to stock? I don't have a nandroid backup..
Thanks in advance!
Try Magio Rom and do S-off > then flash RUU. It works for me with hboot 2.16
First: S-off using facepalm follow this:
1) update your android sdk by clicking android sdk manager and then update from there.
2) after the update finished, shut down your computer and then turn it on again.
3) turn off your phone, just leave it off for like 5 minutes then go to recovery, wipe cache and dalvik cache, then fix permissions then reboot to system.
4) using ONLY the oem htc usb cable, plug in your phone to a usb 2.0 port.
5) just before doing anything else, first check if your phone is recognized by typing "adb devices", there you should see your devices' serial number if it's recognized correctly.
6) then proceed to the steps of facepalm.
Just remember to NOT do the fastboot flash firmware again after error 92. Then after finishing "fastboot oem boot", your computer should then recognize again your phone, then you could proceed to the last three commands.
This is how i managed to have s-off using facepalm. At first i was really frustrated of that error 99, but a little reading and searching won't hurt you.
Take note that the steps i just said may or may not be required to do so, and i don't know if all these steps are really necessary but i just want to share to you guys that have had the same problem as mine. Good luck guys. Hope this helps.
Click to expand...
Click to collapse
hongha_222 said:
Try Magio Rom and do S-off > then flash RUU. It works for me with hboot 2.16
Click to expand...
Click to collapse
Do I need superCID?
And what RUU is needed in step 5 of the facepalm S-OFF
mk13139 said:
Do I need superCID?
And what RUU is needed in step 5 of the facepalm S-OFF
Click to expand...
Click to collapse
not RUU / PJ4010000-OneS.zip
I think you don't need Supercid. Just try Magio first
hongha_222 said:
not RUU / PJ4010000-OneS.zip
I think you don't need Supercid. Just try Magio first
Click to expand...
Click to collapse
Ok thank you for your help, I will try it out soon!
However in the facepalm thread it says you do need supercid... And for supercid you do need to be S-OFF? That's strange..
When I have S-OFF, I can flash any ROM without boot.img and any RUU right?
mk13139 said:
Ok thank you for your help, I will try it out soon!
However in the facepalm thread it says you do need supercid... And for supercid you do need to be S-OFF? That's strange..
When I have S-OFF, I can flash any ROM without boot.img and any RUU right?
Click to expand...
Click to collapse
Magio rom don't need s-off. You might be stuck at supercid and s-off with hboot 2.16 !!! Try it first to do supercid and s-off
When you have s-off, you can flash any Rom with boot.img and RUU.
hongha_222 said:
Magio rom don't need s-off. You might be stuck at supercid and s-off with hboot 2.16 !!! Try it first to do supercid and s-off
When you have s-off, you can flash any Rom with boot.img and RUU.
Click to expand...
Click to collapse
Hey bro, I was in the same situation as you was. Flashing magio rom brought no luck. Instead of searching for RUU, which I simply cannot get I downloaded the nandroid backup 3.16.111.7 from that awesome guy over at this post http://forum.xda-developers.com/showthread.php?t=2192964&page=2
Copy that to your phone (the backup is big, but google drive is fast, I've downloaded it as fast as 12MB/s) and restore the backup. Note that you need to put the backup into /sdcard/TWRP/BACKUPS/ <your device serial> /
If you dont have <your device serial> folder in BACKUPS, just do a backup of something small, it will appear there.
So restore the backup, boot into the rom you just restored, enable android debugging and run moonshine (HTC One S TMO_DE for 3.16.111.10) - it works flawlessly on the backup of 3.16.111.7.
NOTE: After restoring the backup, you may need to flash original kernel boot.img. All I did was download Bulletproof kernel 1.1 and flash the boot.img in fastboot. If the bootloader is locked, just unlock it by the steps below.
So now you're s-off hopefully, and you can boot into fastboot to get SuperCID (command fastboot oem writecid 11111111), and the bootloader may actually get locked now (or it may not...)
If your bootloader is locked, head on to htcdev and unlock it (you will need new unlock_code.bin, the old one wouldn't work).
After unlocking, just flash your favorite recovery (I use TWRP 2.4.1.0) and voila, you can mount your sdcard or adb sideload the rom zip. You may need to format external sd and then mount your sdcard, then windows will ask to format it, which is good and then you can copy the rom zip.
Hope this helped you, because I was struggling for 3 days with a non-working phone.
m4te said:
Hey bro, I was in the same situation as you was. Flashing magio rom brought no luck. Instead of searching for RUU, which I simply cannot get I downloaded the nandroid backup 3.16.111.7 from that awesome guy over at this post http://forum.xda-developers.com/showthread.php?t=2192964&page=2
Copy that to your phone (the backup is big, but google drive is fast, I've downloaded it as fast as 12MB/s) and restore the backup. Note that you need to put the backup into /sdcard/TWRP/BACKUPS/ <your device serial> /
If you dont have <your device serial> folder in BACKUPS, just do a backup of something small, it will appear there.
So restore the backup, boot into the rom you just restored, enable android debugging and run moonshine (HTC One S TMO_DE for 3.16.111.10) - it works flawlessly on the backup of 3.16.111.7.
NOTE: After restoring the backup, you may need to flash original kernel boot.img. All I did was download Bulletproof kernel 1.1 and flash the boot.img in fastboot. If the bootloader is locked, just unlock it by the steps below.
So now you're s-off hopefully, and you can boot into fastboot to get SuperCID (command fastboot oem writecid 11111111), and the bootloader may actually get locked now (or it may not...)
If your bootloader is locked, head on to htcdev and unlock it (you will need new unlock_code.bin, the old one wouldn't work).
After unlocking, just flash your favorite recovery (I use TWRP 2.4.1.0) and voila, you can mount your sdcard or adb sideload the rom zip. You may need to format external sd and then mount your sdcard, then windows will ask to format it, which is good and then you can copy the rom zip.
Hope this helped you, because I was struggling for 3 days with a non-working phone.
Click to expand...
Click to collapse
Wait all of this would work on hboot 2.16? I have the same problem im s-on but super cid.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Edit: I have an htc one s by rogers so would it matter if i use the nandroid i dont have a tmo htc one s
cyberusman said:
Wait all of this would work on hboot 2.16? I have the same problem im s-on but super cid.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Edit: I have an htc one s by rogers so would it matter if i use the nandroid i dont have a tmo htc one s
Click to expand...
Click to collapse
I was on HBOOT 2.15 (from JB OTA). With that hboot, you can not get SuperCID only by altering it in mmcblk0p4, so I had to do s-off first. If you have SuperCID, why dont you try facepalm s-off method? http://forum.xda-developers.com/showthread.php?t=2155135
Please help. I'm confused. I have HBOOT 2.15
I'm S-ON.
I can't get supercid, because mmcblk0p4 is write protected or something. (I followed exactly the steps but it just doesn't stick)
And I can't S-OFF because for that I need Supercid. But you say you can S-OFF without having supercid?
Sent from my One S using xda app-developers app
rolo143 said:
Please help. I'm confused. I have HBOOT 2.15
I'm S-ON.
I can't get supercid, because mmcblk0p4 is write protected or something. (I followed exactly the steps but it just doesn't stick)
And I can't S-OFF because for that I need Supercid. But you say you can S-OFF without having supercid?
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Have you tried my instructions that are on this page? http://forum.xda-developers.com/showpost.php?p=46939498&postcount=7
I haven't. Can I use that method and install the backup doesn't matter which firmware version I have?
Sent from my One S using xda app-developers app
m4te said:
Hey bro, I was in the same situation as you was. Flashing magio rom brought no luck. Instead of searching for RUU, which I simply cannot get I downloaded the nandroid backup 3.16.111.7 from that awesome guy over at this post http://forum.xda-developers.com/showthread.php?t=2192964&page=2
Copy that to your phone (the backup is big, but google drive is fast, I've downloaded it as fast as 12MB/s) and restore the backup. Note that you need to put the backup into /sdcard/TWRP/BACKUPS/ <your device serial> /
If you dont have <your device serial> folder in BACKUPS, just do a backup of something small, it will appear there.
So restore the backup, boot into the rom you just restored, enable android debugging and run moonshine (HTC One S TMO_DE for 3.16.111.10) - it works flawlessly on the backup of 3.16.111.7.
NOTE: After restoring the backup, you may need to flash original kernel boot.img. All I did was download Bulletproof kernel 1.1 and flash the boot.img in fastboot. If the bootloader is locked, just unlock it by the steps below.
So now you're s-off hopefully, and you can boot into fastboot to get SuperCID (command fastboot oem writecid 11111111), and the bootloader may actually get locked now (or it may not...)
If your bootloader is locked, head on to htcdev and unlock it (you will need new unlock_code.bin, the old one wouldn't work).
After unlocking, just flash your favorite recovery (I use TWRP 2.4.1.0) and voila, you can mount your sdcard or adb sideload the rom zip. You may need to format external sd and then mount your sdcard, then windows will ask to format it, which is good and then you can copy the rom zip.
Hope this helped you, because I was struggling for 3 days with a non-working phone.
Click to expand...
Click to collapse
When you had this problem were you on hboot 2.16? I have super cid but when i try to flash the zip file for face palm s-off it gives me error 99 unkown fail