Related
First off here's what I'm working with:
Rogers HTC One X
Cyanogenmod from http://forum.xda-developers.com/showthread.php?t=2205183
Recovery - TWRP 2.5
Hboot - 2.14
radio - 0.23a.32.09.29
Rooted - I don't think so
SuperCID - 22222222
S-OFF - No
Lock status - Unlocked with HTCDev after SuperCID
Story time:
After deciding to install cyanogenmod on the weekend I've run in to a myriad of issues. I was able to unlock, flash CWM recovery, and install Cyanogen fairly easily, but I ran into the issue where the touch screen doesn't work.
What I've done:
I've found the fix detailed here: http://forum.xda-developers.com/showthread.php?t=2159863, but have been unable to get all the prerequisites going. From the screen fix thread linked above I need to be rooted, s-offed, and superCIDed.
I believe I got the superCID working by following the steps in this post: http://forum.xda-developers.com/showpost.php?p=41482419&postcount=2 and fastboot oem readcid returns 22222222
After that I was unlocked before but locked and relocked with a new unlockcode from htcdev
For rooting, I've looked at the methods listed under Root on http://forum.xda-developers.com/showthread.php?t=1671237, but I'm not too sure where to find which firmware I'm on. That would be the version of cyanogen would it not. I've tried the x-factor method using All-In-One Toolkit from http://forum.xda-developers.com/showthread.php?t=1952426 to no avail, as well as SuperSU from http://forum.xda-developers.com/showthread.php?t=1673935 and this one: http://forum.xda-developers.com/showthread.php?t=1644167, but I don't think any method has worked so far.
In order to use S-Off I'm pretty sure you need to be rooted, so it of course it didn't work, what made me think I wasn't rooted was when I was going through the Facepalm S-Off guide here: http://forum.xda-developers.com/showthread.php?t=2155071 when I ran "adb shell su -c "/data/local/tmp/soffbin3" it would just me the error su: not found, which means your not in as root according to: http://forum.xda-developers.com/showthread.php?p=38278577#post38278577
I've also tried going back to stock using the RUU RUU_Evita_UL_Rogers_WWE_1.94.631.3_Radio_0.18as.32.09.28L_10.103.32.24L_release_268972_signed.exe from http://ruu.androidfiles.org/getdown...9.28L_10.103.32.24L_release_268972_signed.exe, but when I run it I get error 99: Unknown Error, and I if I look in the log it creates it says error 44 HBOOT mismatch. I'm running after relocking, and I've tried just grabbing the rom.zip from %temp%, extracting it and flashing the boot and system imgs, but it says the system.img is too big.
At this point I'd just like to get my phone to work. If I can get it with CM that'd be cool, but stock would be good too. Any help would be appreciated.
Thanks!
In cyanogenmod you have to allow adb root access in developer options.
To ruu without s-off you need to change your cid back to the default but you will brick if you update to 3.18 after. Best to s-off since you changed your cid.
Sent from my Sony Tablet S using xda app-developers app
exad said:
In cyanogenmod you have to allow adb root access in developer options.
Click to expand...
Click to collapse
The touchpad doesn't work in cyanogenmod though, that's the root of the issue
exad said:
To ruu without s-off you need to change your cid back to the default but you will brick if you update to 3.18 after. Best to s-off since you changed your cid.
Click to expand...
Click to collapse
I was trying to RUU before changing CID, but was running in to "FAILED (remote: 44 hboot version check fail)", when running the RUU mentioned in the OP
Ah I see the ruu must have had an older hboot version than the one on your phone. You cant downgrade firmware without s-off.
To fix your issue you will need to flash a sense rom and then s-off and then downgrade your touchscreen firmware. Then you can flash whatever evita rom you like.
Sent from my Sony Tablet S using xda app-developers app
exad said:
Ah I see the ruu must have had an older hboot version than the one on your phone. You cant downgrade firmware without s-off.
To fix your issue you will need to flash a sense rom and then s-off and then downgrade your touchscreen firmware. Then you can flash whatever evita rom you like.
Click to expand...
Click to collapse
Thank you very much!
I flashed the Sense build from http://forum.xda-developers.com/showthread.php?t=2293032 and was then able to S-Off. After that I was able to down grade the touchpad firmware and install cyanogenmod.
Thanks again for pointing me in the right direction
:victory:
I have S4 Ville on firmware 3.14.531.17 and need to know if S-OFF is possible using whatever method available. Moonshine thread states that only 3.14.531.11 (T-MOB) is supported and haven't found any details in the Facepalm thread.
Anyone know for sure?
Bump
Sent from my One S using XDA Premium 4 mobile app
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
tivofool said:
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
Click to expand...
Click to collapse
Well gave this a shot and after 5 hours I am back on CM10.2 with S-ON and latest firmware still.
Thanks for the help though. Cheers.
Anyone else got any idea?
bump
Look for 3.14.531.11. It should be available somewhere. Lock the phone back and RUU it. Then you can unlock again and S-OFF with moonshine.
evrycard said:
Look for 3.14.531.11. It should be available somewhere. Lock the phone back and RUU it. Then you can unlock again and S-OFF with moonshine.
Click to expand...
Click to collapse
He probably cannot downgrade from *.17 to *.11.
I don't know what parts of the firmware moonshine needs. But you could try downgrade using a OTA or Nandroid.
Same here
I'm pretty much stuck with a One-S Bootloader unlocked with S-on.
I can't find a way to get S-Off. Just googling and throwing prayers in the sky someone develops a way.
pyrocide said:
Well gave this a shot and after 5 hours I am back on CM10.2 with S-ON and latest firmware still.
Thanks for the help though. Cheers.
Anyone else got any idea?
Click to expand...
Click to collapse
If that procedure took you 5 hours... Maybe s-off isn't for you.
Sent from my HTC One S using xda app-developers app
havikx said:
If that procedure took you 5 hours... Maybe s-off isn't for you.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
It took me 5 hours total to begin finding all req's and trying the above method, finding it not to work, redoing the RUU *.17 and getting BACK on CM10.2 and having a phone to make calls with. The method above took maybe 20-30 minutes of double checking and making sure i didn't miss something.
Maybe PM this guy. He posted that it moonshine worked on .17.
http://forum.xda-developers.com/showpost.php?p=45955250&postcount=1091
Ask if he ran moonshine on Linux.
tivofool said:
Maybe PM this guy. He posted that it moonshine worked on .17.
http://forum.xda-developers.com/showpost.php?p=45955250&postcount=1091
Ask if he ran moonshine on Linux.
Click to expand...
Click to collapse
PM'd him for more info. Thanks!
So I was having problems getting s-off as well, eventually I got it done, but it was definitely a big trial and error process.
What I ended up doing was:
1) Get the 3.14.531.11 RUU from http://www.androidruu.com/index.php?developer=Ville (make sure you get the TMOUS one) This link is also provided in the first post in the Android development section
2) I ended up using Moonshine S-Off (http://forum.xda-developers.com/showthread.php?t=2325590) but I needed to use it in conjunction with running it on Ubuntu. Luckily I had a spare hard drive lying around. If you don't, I believe you can run it through the CD as well as long your burn the Ubuntu.iso on a disc. Plug in your phone to the computer and let it do its magic
3) From there, if you wanted to, you can change to SuperCID. Since you have s-off by then, you can change it from the fastboot usb in the bootloader with the line fastboot oem writecid 11111111 (double check, i'm just writing off the top of my head)
4) Then install roms and etc through the usual custom recovery
Note. I tried the Maximus HD, yes it was nice, but it didn't allow me to utilize my phone as a hotspot, so I ended up using the Dark Jelly rom instead. So far it's been very nice. The hotspot works, but the tethering portion is still unavailable. Just my two cents.
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
tivofool said:
My steps I took: (don't know if all were necessary)
Made a backup (nandroid) in recovery and saved it to my pc to be safe.
flashed stock recovery
locked bootloader
ran a RUU.exe to get on the supported firmware.
unlocked bootloader
Then I ran moonshine.
flashed recovery I had before
Restored the backup in recovery and had my original setup plus I was now S-off.
Click to expand...
Click to collapse
i can say that this worked for me as well. i didn't relock bootloader before installing the 3.14.531.11 ruu though. still worked for me. also installed moonshine on windows. ( guess i'm lucky )
bnd10706 said:
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
Click to expand...
Click to collapse
You saved me so much time. Thanks!
bnd10706 said:
I had a hell of a time getting S-OFF pyrocide
Just like you I had H-boot 2.15 and the .17 firmware
here is what you do... this worked for me
download this RUU http://forum.xda-developers.com/showthread.php?t=2279588
adb reboot bootloader
fastboot oem lock
run the RUU
after RUU is loaded and all done 15-20 min
unlock your bootloader with HTC Dev tools
Run moonshine
Works. Promise
Click to expand...
Click to collapse
I do not understand meet all the requirement and I run it step by step and still gets stuck in step 3 moonshine I need urgent help, thanks
pyrocide said:
I have S4 Ville on firmware 3.14.531.17 and need to know if S-OFF is possible using whatever method available. Moonshine thread states that only 3.14.531.11 (T-MOB) is supported and haven't found any details in the Facepalm thread.
Anyone know for sure?
Click to expand...
Click to collapse
Test... click here
http://forum.xda-developers.com/showthread.php?t=2569755
[Q]Hboot/Firmware update 2.15 to 2.16 et al.
Sorry wrong thread.
Recently I tried out a custom rom on my T-mobile branded One S, but I want to revert back to stock in order to do a S-OFF.
Before flashing the custom rom I ran the latest official t-mobile firmware, non rooted, original recovery, h-boot 2.16 and radio 1.15, S-ON. I unlocked the phone with an HTC-dev unlock token, flashed TWRP recovery and flashed a custom rom but left the phone S-ON.
Now I want to revert back to stock so I can do a S-OFF (which is needed for certain roms). I picked a RUU corresponding my CID t-mob101, in this case the only one I could find was:
Code:
RUU_Ville_U_TMO_DE_1.77.111.5_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_259421_signed.exe
I wanted to try this one, but the download link is dead:
Code:
RUU_Ville_U_ICS_40_S_TMO_DE_2.38.111.10_Radio_1.09 es.50.02.07_2_10.09d.50.04L_ver2_release_287723_si gned.exe
I flashed back the original recovery, relocked the phone and tried to run the RUU. However when running the RUU I get an 155 error, which means the RUU isn't corresponding to my CID?
Does this mean i'm out of any options reverting to stock? I don't have a nandroid backup..
Thanks in advance!
Try Magio Rom and do S-off > then flash RUU. It works for me with hboot 2.16
First: S-off using facepalm follow this:
1) update your android sdk by clicking android sdk manager and then update from there.
2) after the update finished, shut down your computer and then turn it on again.
3) turn off your phone, just leave it off for like 5 minutes then go to recovery, wipe cache and dalvik cache, then fix permissions then reboot to system.
4) using ONLY the oem htc usb cable, plug in your phone to a usb 2.0 port.
5) just before doing anything else, first check if your phone is recognized by typing "adb devices", there you should see your devices' serial number if it's recognized correctly.
6) then proceed to the steps of facepalm.
Just remember to NOT do the fastboot flash firmware again after error 92. Then after finishing "fastboot oem boot", your computer should then recognize again your phone, then you could proceed to the last three commands.
This is how i managed to have s-off using facepalm. At first i was really frustrated of that error 99, but a little reading and searching won't hurt you.
Take note that the steps i just said may or may not be required to do so, and i don't know if all these steps are really necessary but i just want to share to you guys that have had the same problem as mine. Good luck guys. Hope this helps.
Click to expand...
Click to collapse
hongha_222 said:
Try Magio Rom and do S-off > then flash RUU. It works for me with hboot 2.16
Click to expand...
Click to collapse
Do I need superCID?
And what RUU is needed in step 5 of the facepalm S-OFF
mk13139 said:
Do I need superCID?
And what RUU is needed in step 5 of the facepalm S-OFF
Click to expand...
Click to collapse
not RUU / PJ4010000-OneS.zip
I think you don't need Supercid. Just try Magio first
hongha_222 said:
not RUU / PJ4010000-OneS.zip
I think you don't need Supercid. Just try Magio first
Click to expand...
Click to collapse
Ok thank you for your help, I will try it out soon!
However in the facepalm thread it says you do need supercid... And for supercid you do need to be S-OFF? That's strange..
When I have S-OFF, I can flash any ROM without boot.img and any RUU right?
mk13139 said:
Ok thank you for your help, I will try it out soon!
However in the facepalm thread it says you do need supercid... And for supercid you do need to be S-OFF? That's strange..
When I have S-OFF, I can flash any ROM without boot.img and any RUU right?
Click to expand...
Click to collapse
Magio rom don't need s-off. You might be stuck at supercid and s-off with hboot 2.16 !!! Try it first to do supercid and s-off
When you have s-off, you can flash any Rom with boot.img and RUU.
hongha_222 said:
Magio rom don't need s-off. You might be stuck at supercid and s-off with hboot 2.16 !!! Try it first to do supercid and s-off
When you have s-off, you can flash any Rom with boot.img and RUU.
Click to expand...
Click to collapse
Hey bro, I was in the same situation as you was. Flashing magio rom brought no luck. Instead of searching for RUU, which I simply cannot get I downloaded the nandroid backup 3.16.111.7 from that awesome guy over at this post http://forum.xda-developers.com/showthread.php?t=2192964&page=2
Copy that to your phone (the backup is big, but google drive is fast, I've downloaded it as fast as 12MB/s) and restore the backup. Note that you need to put the backup into /sdcard/TWRP/BACKUPS/ <your device serial> /
If you dont have <your device serial> folder in BACKUPS, just do a backup of something small, it will appear there.
So restore the backup, boot into the rom you just restored, enable android debugging and run moonshine (HTC One S TMO_DE for 3.16.111.10) - it works flawlessly on the backup of 3.16.111.7.
NOTE: After restoring the backup, you may need to flash original kernel boot.img. All I did was download Bulletproof kernel 1.1 and flash the boot.img in fastboot. If the bootloader is locked, just unlock it by the steps below.
So now you're s-off hopefully, and you can boot into fastboot to get SuperCID (command fastboot oem writecid 11111111), and the bootloader may actually get locked now (or it may not...)
If your bootloader is locked, head on to htcdev and unlock it (you will need new unlock_code.bin, the old one wouldn't work).
After unlocking, just flash your favorite recovery (I use TWRP 2.4.1.0) and voila, you can mount your sdcard or adb sideload the rom zip. You may need to format external sd and then mount your sdcard, then windows will ask to format it, which is good and then you can copy the rom zip.
Hope this helped you, because I was struggling for 3 days with a non-working phone.
m4te said:
Hey bro, I was in the same situation as you was. Flashing magio rom brought no luck. Instead of searching for RUU, which I simply cannot get I downloaded the nandroid backup 3.16.111.7 from that awesome guy over at this post http://forum.xda-developers.com/showthread.php?t=2192964&page=2
Copy that to your phone (the backup is big, but google drive is fast, I've downloaded it as fast as 12MB/s) and restore the backup. Note that you need to put the backup into /sdcard/TWRP/BACKUPS/ <your device serial> /
If you dont have <your device serial> folder in BACKUPS, just do a backup of something small, it will appear there.
So restore the backup, boot into the rom you just restored, enable android debugging and run moonshine (HTC One S TMO_DE for 3.16.111.10) - it works flawlessly on the backup of 3.16.111.7.
NOTE: After restoring the backup, you may need to flash original kernel boot.img. All I did was download Bulletproof kernel 1.1 and flash the boot.img in fastboot. If the bootloader is locked, just unlock it by the steps below.
So now you're s-off hopefully, and you can boot into fastboot to get SuperCID (command fastboot oem writecid 11111111), and the bootloader may actually get locked now (or it may not...)
If your bootloader is locked, head on to htcdev and unlock it (you will need new unlock_code.bin, the old one wouldn't work).
After unlocking, just flash your favorite recovery (I use TWRP 2.4.1.0) and voila, you can mount your sdcard or adb sideload the rom zip. You may need to format external sd and then mount your sdcard, then windows will ask to format it, which is good and then you can copy the rom zip.
Hope this helped you, because I was struggling for 3 days with a non-working phone.
Click to expand...
Click to collapse
Wait all of this would work on hboot 2.16? I have the same problem im s-on but super cid.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Edit: I have an htc one s by rogers so would it matter if i use the nandroid i dont have a tmo htc one s
cyberusman said:
Wait all of this would work on hboot 2.16? I have the same problem im s-on but super cid.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Edit: I have an htc one s by rogers so would it matter if i use the nandroid i dont have a tmo htc one s
Click to expand...
Click to collapse
I was on HBOOT 2.15 (from JB OTA). With that hboot, you can not get SuperCID only by altering it in mmcblk0p4, so I had to do s-off first. If you have SuperCID, why dont you try facepalm s-off method? http://forum.xda-developers.com/showthread.php?t=2155135
Please help. I'm confused. I have HBOOT 2.15
I'm S-ON.
I can't get supercid, because mmcblk0p4 is write protected or something. (I followed exactly the steps but it just doesn't stick)
And I can't S-OFF because for that I need Supercid. But you say you can S-OFF without having supercid?
Sent from my One S using xda app-developers app
rolo143 said:
Please help. I'm confused. I have HBOOT 2.15
I'm S-ON.
I can't get supercid, because mmcblk0p4 is write protected or something. (I followed exactly the steps but it just doesn't stick)
And I can't S-OFF because for that I need Supercid. But you say you can S-OFF without having supercid?
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Have you tried my instructions that are on this page? http://forum.xda-developers.com/showpost.php?p=46939498&postcount=7
I haven't. Can I use that method and install the backup doesn't matter which firmware version I have?
Sent from my One S using xda app-developers app
m4te said:
Hey bro, I was in the same situation as you was. Flashing magio rom brought no luck. Instead of searching for RUU, which I simply cannot get I downloaded the nandroid backup 3.16.111.7 from that awesome guy over at this post http://forum.xda-developers.com/showthread.php?t=2192964&page=2
Copy that to your phone (the backup is big, but google drive is fast, I've downloaded it as fast as 12MB/s) and restore the backup. Note that you need to put the backup into /sdcard/TWRP/BACKUPS/ <your device serial> /
If you dont have <your device serial> folder in BACKUPS, just do a backup of something small, it will appear there.
So restore the backup, boot into the rom you just restored, enable android debugging and run moonshine (HTC One S TMO_DE for 3.16.111.10) - it works flawlessly on the backup of 3.16.111.7.
NOTE: After restoring the backup, you may need to flash original kernel boot.img. All I did was download Bulletproof kernel 1.1 and flash the boot.img in fastboot. If the bootloader is locked, just unlock it by the steps below.
So now you're s-off hopefully, and you can boot into fastboot to get SuperCID (command fastboot oem writecid 11111111), and the bootloader may actually get locked now (or it may not...)
If your bootloader is locked, head on to htcdev and unlock it (you will need new unlock_code.bin, the old one wouldn't work).
After unlocking, just flash your favorite recovery (I use TWRP 2.4.1.0) and voila, you can mount your sdcard or adb sideload the rom zip. You may need to format external sd and then mount your sdcard, then windows will ask to format it, which is good and then you can copy the rom zip.
Hope this helped you, because I was struggling for 3 days with a non-working phone.
Click to expand...
Click to collapse
When you had this problem were you on hboot 2.16? I have super cid but when i try to flash the zip file for face palm s-off it gives me error 99 unkown fail
Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.
Have you changed your CID?
mag13 said:
Have you changed your CID?
Click to expand...
Click to collapse
Please read again.
I was Super CID (11111111) but easily changed it to match TMobile (T-MOB010) with this tool for the update.
Click to expand...
Click to collapse
yooouuri said:
Please read again.
Click to expand...
Click to collapse
I am on Super CID and it does not work
mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
You have to change your CID back to the one for your RUU.
Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4 after I flashed MaximusHD and firmware?
Now my phone is like this:
Hboot 2.16
Radio 1.20.50 (worst radio ever)
S-OFF
CID 11111111
The rom's with sense 5 (I tried just maximus because the others are not compatible with the new firmware, the sdcard mount point for multi user) are killing my battery more than twice faster compared with ViperS. 2h Display vs 5h on Viper.
Thank you!
Can we use this as rollback from h-boot 2.16 ?
mag13 said:
I am on Super CID and it does not work
Click to expand...
Click to collapse
I didn't think it would. Glad you didn't brick your phone and I'll update the OP based on your experiment.
flow27 said:
Can we use this as rollback from h-boot 2.16 ?
Click to expand...
Click to collapse
arazvan2002 said:
Can I use this tutorial to rollback to 2.15 or whatever works for ViperS rom with sense 4
Click to expand...
Click to collapse
Upgrading your hboot is a one way street, as far as I know. Can't you change the radio to something else?
I flashed Viper ROM. All the things are ok, gsm, wifi, etc just I can't see the internal memory like I should. I can browse to it file es file explorer but I need a method to default mount the new (4.2.2) location of it. Where is mounted by the internal memory in 4.1 JB? I discovered a file vold.fstab. Maybe I can change something like that somewhere to be able to use 4.1 ROM's again.
Sorry for OFF topic.
Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?
yooouuri said:
Somebody asked it but i want a clear awnser.
Can i use it to roll back to 2.15 from 2.16?
Click to expand...
Click to collapse
Yes you can if youre s-off.
Sent from HTC One S using android 4.2.2 sense 5
Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?
yooouuri said:
Im s-off and changen my RUU back to the origonal.
Using RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
But i get the same error. Cant update because wrong "Update tool".
-------------------------------
Flashed orig_hboot_2.15.0000.zip
But im stuck on 1.20 Radio?
Click to expand...
Click to collapse
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?
tivofool said:
Did you run the RUU.exe when your phone was in bootloader (fastboot USB mode)?
Click to expand...
Click to collapse
That's the right thing to do, yes?
kilo94 said:
That's the right thing to do, yes?
Click to expand...
Click to collapse
Yes
I have the same problem. I can't go back to stock. I haven't changed my CID yet but I see that has not worked for you.
Did you try with HTC__001 ?
dhigby said:
Running an RUU is only simple for those who haven't been messing with their devices, and that usually isn't us. Since I just did this, I want to write down the steps because I was not able to find easy answers.
This assumes your device is rooted with a different ROM installed. If that is not the case, then you can just download and run the RUU for your device, end of instructions.
Downloading the correct RUU
The most complete list of RUUs for Ville is found on androidruu.com
T-Mobile: http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
HTC Europe: http://www.androidruu.com/getdownlo...28_10.27.50.08L_release_301814_signed_2_4.exe
There are RUU updates listed for other service providers, but I can't tell if they are JellyBean hboot 2.15 or not. If someone knows, I'll update this post.
Preparing your device
Make your device s-off if it isn't already. Why?
You will not have to relock the bootloader to perform the RUU update.
You will not have to flash the boot image separately.
If for some reason you can't or won't go s-off, you can still do this, but will have many more steps to follow.
Instructions to make your device s-off are here for firmwares below 3.14: Facepalm S-Off for HTC Devices One S, One XL, Droid DNA
Or you can use the HTC All-In-One Toolkit which helps you through the process.
Use the HTC All-In-One Toolkit (link above) to change the CID to match the RUU.
You needed Super CID to gain s-off, but it won't help you install RUUs. Even if you are Super CID (11111111), you must change your CID to match the RUU you are installing (mine is TMobile: T-MOB010). I know, kinda defeats the purpose of being Super CID, but the RUU won't succeed otherwise. If you are s-off, it is a one click operation using the All-In-One Toolkit.
Backup your device
Use Titanium backup to backup all your user apps so you can restore them afterwards. (No, don't restore system apps please!)
Also back up your ROM by booting into recovery mode and selecting Backup.
If you are only updating the hboot but keeping the same ROM, you can just restore the backup afterwards. Not sure why anyone would need to update the hboot without installing a new ROM, but then you also have a backup in case things go wrong.
Run the RUU
If you are s-on you will have to relock the bootloader by rebooting into the fastboot mode, connecting your device to the computer and running the command "fastboot oem lock". You will also have to follow the process again to unlock your bootloader after doing the update. Tutorials for that are found elsewhere.
1. Leave bootloader unlocked, and leave s-off as is. No need to go back to s-on or relock bootloader.
2. Run the RUU and wait while it updates the phone (Incidentally, it didn't even wipe my sd partition data!)
3. While you are still in bootloader mode (before booting up), use the All-In-One tool to install the TWRP S4 recovery. Or, if you don't want to use the tool, you'll have to download a recovery and use "fastboot flash recovery" followed by the name of the recovery img file.
4. Reboot bootloader and enter recovery mode
5. Restore from backup or Mount USB from TWRP and copy over the ROM and gapps package, flash, wipe cache, and you are up and running.
If you are s-on you will need to extract the boot.img from the zip you are flashing and flash that image separately with "fastboot flash boot boot.img"
Note that device still has the unlocked bootloader and is still s-off! :victory:
My device before: hboot 1.09, unlocked bootloader, Super CID, s-off (In layman's terms, this is a device with an unlocked bootloader so it can accept other ROMs, set to accept any service provider's RUU update via SuperCID, and has had write permission to the boot sector removed via s-off).
My device after: hboot 2.15, unlocked bootloader, T-MOB010 CID, s-off
If possible, I will answer your comments or questions by updating this post and I'll refer you back to here.
Click to expand...
Click to collapse
Hey I used your instructions and everything was perfect thank you. I used to upgarde and downgrade hboot even to restore the HTC one S
I got the RUU "Error: 159" again with both RUU from first post and testet with each common cid, but at the end I only got success with super cid and the TMO_US Ruu.
Now I am back on Hboot 2.15 and can flash again the newest custom-recovery, thank you very much.
I've heard about a flashabe standalone zip for the hboot 2.15 and found this:
Only for S4!
Boot into bootloader and enable fastboot.
Code:
fastboot oem rebootRUU
Wait for the black screen with white HTC symbol. (Like when you flash a RUU)
then enter:
Code:
fastboot flash zip modded_hboot_YOUR_NEEDED_HBOOT.zip
then if you want
Code:
fastboot oem boot
(Boot into your current ROM)
modded_ = The red text is removed and "tampered" is gone in bootloader.
Download:
modded_hboot_1.06.0000.zip - (397.1 KB)
modded_hboot_1.09.0000.zip - (400.6 KB)
modded_hboot_1.13.0000.zip - (399.0 KB)
modded_hboot_1.14.0002.zip - (405.3 KB)
modded_hboot_1.14.0004.zip - (373.2 KB)
modded_hboot_1.14.0005.zip - (373.6 KB)
modded_hboot_2.15.0000.zip - (400.9 KB)
modded_hboot_2.16.0000.zip - (398.6 KB)
Thx goes to: touch of jobo XDA Post Source
DISCLAIMER:this is not my work. i have tested it on my own device,but use it at your own risk. if it melts your phone into a lil pile of goo,its not my fault.
Greetings by Idijt
Hello I have supercid, s-off and previously flashed MAXIMUSHD ROM and that's on hboot 2.16 so I got board and sick of sense 5 and I want to try out one of the kitkat ROMs but I need hboot 2.15 for that and yes I know that there are hboot 2.16 kitkat roms but they are unstable so can someone tell me step by step how to downgrade hboot 2.16 to 2.15 because I'm quite of a dumb person
the_ziom said:
Hello I have supercid, s-off and previously flashed MAXIMUSHD ROM and that's on hboot 2.16 so I got board and sick of sense 5 and I want to try out one of the kitkat ROMs but I need hboot 2.15 for that and yes I know that there are hboot 2.16 kitkat roms but they are unstable so can someone tell me step by step how to downgrade hboot 2.16 to 2.15 because I'm quite of a dumb person
Click to expand...
Click to collapse
This is how I proceed :
1) Downgrade to 2.15 hboot by flashing the old firmware (extract firmware.zip and flash as you did for MaximusHD)
2) Run the latest RUU to get everything clean (I flashed this one)
3) Flash custom recovery with fastboot (TWRP 2.3.X.X)
4) You're done !
benJX said:
This is how I proceed :
1) Downgrade to 2.15 hboot by flashing the old firmware (extract firmware.zip and flash as you did for MaximusHD)
2) Run the latest RUU to get everything clean (I flashed this one)
3) Flash custom recovery with fastboot (TWRP 2.3.X.X)
4) You're done !
Click to expand...
Click to collapse
thank you but i have super cid and from what i have read i have to install the ruu according to my cid
tell me if im right
the_ziom said:
thank you but i have super cid and from what i have read i have to install the ruu according to my cid
tell me if im right
Click to expand...
Click to collapse
In fact, the CID matters if you have one from an operator (have a look here, but not the last one, it's the superCID), in this case, you have to choose a RUU according to your operator.
But being superCID, you can run any RUU, so run the last generic one (see my link) and everything will be ok to start from official clean install. Of course you'll stay S-OFF after running the RUU.
The only thing requested is to be on 2.15 hboot, that's why you have to downgrade to older firmware in order to run this.
Hope it will help.
I have kind of a similar question. After moonshine S-OFF, I'm on modified moonshine HBOOT 2.15.4444. Now I want to go back to the stock HBOOT 2.15.0000. Do I just need to run the RUU to go back? I'm bootloader unlocked, CID T-MOB010, TWRP recovery, and I flashed radio 1.20. Do I need to flash radio back to match the RUU before I run it?
Thanks
dr3amsINdigital said:
I have kind of a similar question. After moonshine S-OFF, I'm on modified moonshine HBOOT 2.15.4444. Now I want to go back to the stock HBOOT 2.15.0000. Do I just need to run the RUU to go back? I'm bootloader unlocked, CID T-MOB010, TWRP recovery, and I flashed radio 1.20. Do I need to flash radio back to match the RUU before I run it?
Thanks
Click to expand...
Click to collapse
Running an RUU is the safest option, although its a bit hit and miss getting the RUU to run correctly. Flashalot recently made a guide (http://forum.xda-developers.com/showthread.php?t=2678700) if you run into any problems. I would try it without changing the radio, if it doesn't work then flash the matching one and go from there.
Now I cannot recommend this, as I have only tried it once myself and the consequences if it went wrong could mean a dead phone, but this post (http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274) details how you can manually flash a hboot version in RUU mode since you are S-OFF. It comes from this thread: http://forum.xda-developers.com/showthread.php?t=1777223. Use it at your own risk, there have been two incidents of bricks but it depends how lucky you are feeling!
rosswhite said:
Running an RUU is the safest option, although its a bit hit and miss getting the RUU to run correctly. Flashalot recently made a guide (http://forum.xda-developers.com/showthread.php?t=2678700) if you run into any problems. I would try it without changing the radio, if it doesn't work then flash the matching one and go from there.
Now I cannot recommend this, as I have only tried it once myself and the consequences if it went wrong could mean a dead phone, but this post (http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274) details how you can manually flash a hboot version in RUU mode since you are S-OFF. It comes from this thread: http://forum.xda-developers.com/showthread.php?t=1777223. Use it at your own risk, there have been two incidents of bricks but it depends how lucky you are feeling!
Click to expand...
Click to collapse
Yeah I heard about that method, but I thought it would be safer to just run the RUU even though it's more work. I think the bricks were from flashing the zips in recovery, not the new ones you flash in fastboot. Either way, I didn't feel like risking it.
Thanks! I'll try the RUU.
dr3amsINdigital said:
Yeah I heard about that method, but I thought it would be safer to just run the RUU even though it's more work. I think the bricks were from flashing the zips in recovery, not the new ones you flash in fastboot. Either way, I didn't feel like risking it.
Thanks! I'll try the RUU.
Click to expand...
Click to collapse
Wise choice, yeah you are right, the bricks were when they were flashing the zips in recovery. Its actually pretty safe in RUU mode but what's the point of risking it.
benJX said:
In fact, the CID matters if you have one from an operator (have a look here, but not the last one, it's the superCID), in this case, you have to choose a RUU according to your operator.
But being superCID, you can run any RUU, so run the last generic one (see my link) and everything will be ok to start from official clean install. Of course you'll stay S-OFF after running the RUU.
The only thing requested is to be on 2.15 hboot, that's why you have to downgrade to older firmware in order to run this.
Hope it will help.
Click to expand...
Click to collapse
dr3amsINdigital said:
I have kind of a similar question. After moonshine S-OFF, I'm on modified moonshine HBOOT 2.15.4444. Now I want to go back to the stock HBOOT 2.15.0000. Do I just need to run the RUU to go back? I'm bootloader unlocked, CID T-MOB010, TWRP recovery, and I flashed radio 1.20. Do I need to flash radio back to match the RUU before I run it?
Thanks
Click to expand...
Click to collapse
rosswhite said:
Running an RUU is the safest option, although its a bit hit and miss getting the RUU to run correctly. Flashalot recently made a guide (http://forum.xda-developers.com/showthread.php?t=2678700) if you run into any problems. I would try it without changing the radio, if it doesn't work then flash the matching one and go from there.
Now I cannot recommend this, as I have only tried it once myself and the consequences if it went wrong could mean a dead phone, but this post (http://forum.xda-developers.com/showpost.php?p=39216236&postcount=274) details how you can manually flash a hboot version in RUU mode since you are S-OFF. It comes from this thread: http://forum.xda-developers.com/showthread.php?t=1777223. Use it at your own risk, there have been two incidents of bricks but it depends how lucky you are feeling!
Click to expand...
Click to collapse
HELP my device does not see any memory and i cant flash any rom hellpp
the_ziom said:
HELP my device does not see any memory and i cant flash any rom hellpp
Click to expand...
Click to collapse
What hboot are you on now? Did you run an RUU to downgrade?
rosswhite said:
What hboot are you on now? Did you run an RUU to downgrade?
Click to expand...
Click to collapse
Hboot 2.15 after running the |RUU.exe|
dont have the memory (does not see device when trying to side load , recovery cant mount sdcard)
help i need my phone
the_ziom said:
Hboot 2.15 after running the |RUU.exe|
dont have the memory (does not see device when trying to side load , recovery cant mount sdcard)
help i need my phone
Click to expand...
Click to collapse
Which recovery did you flash? Try TWRP 2.7.0.0.
the_ziom said:
Hboot 2.15 after running the |RUU.exe|
dont have the memory (does not see device when trying to side load , recovery cant mount sdcard)
help i need my phone
Click to expand...
Click to collapse
Can you boot on stock android rom installed by the ruu ?
rosswhite said:
Which recovery did you flash? Try TWRP 2.7.0.0.
Click to expand...
Click to collapse
i already have twrp 2.7 and i flashed phillz and still nothing
benJX said:
Can you boot on stock android rom installed by the ruu ?
Click to expand...
Click to collapse
yes but i formated my memory to instal a pac man rom
the_ziom said:
yes but i formated my memory to instal a pac man rom
Click to expand...
Click to collapse
So actually you can confirm you are on HBOOT 2.15, Pihllz recovery and no rom installed ?
If yes reboot to bootloader, select clear storage, flash this recovery. Your sdcard should be mountable and let you install your rom.
####
benJX said:
So actually you can confirm you are on HBOOT 2.15, Pihllz recovery and no rom installed ?
If yes reboot to bootloader, select clear storage, flash this recovery. Your sdcard should be mountable and let you install your rom.
Click to expand...
Click to collapse
Another Problem
when ever i try to flash any rom it fails! and i dont know what to do HElp
So many developers and only 2 can help me
Please I'm begging for help
the_ziom said:
Another Problem
when ever i try to flash any rom it fails! and i dont know what to do HElp
Click to expand...
Click to collapse
Flash stock recovery : http://loadbalancing.modaco.com/download.php?file=ville_recovery_signed.img
Then Clear Storage from bootloader and flash TWRP recovery