Database Info

[Q] Help MTK6573(Understanding SP FLASH TOOL error)

I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect

mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx

I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007

I have the same problem in MTK6575. Any solution?
B.R.

check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/

[Q] Got bricked via SP FT

Hi.
I need help with my Zopo C2 platinum please.
I was trying to flash CWM via SP Flash tool i loaded scatter from original rom and paste to same folder cwm recovery.img and I selected only preloader and recovery pressed download it told : OK, but then phone was dead. Cant start, no led after putting to charge, nothing.
I need help with unbrick via SP flash tool, if u can help me guys .
Thanks!

bump :X going to text Vondroid rom via sp, hope it works

So I flashed wrong preloader, can someone help me please?

ngsHOi compass
Tomitko186 said:
So I flashed wrong preloader, can someone help me please?
Click to expand...
Click to collapse
Hi.
For me preloader from C3 ROM did the trick!
Load your C2 ROM in SPFT and change the PRELOADER - browse for one from C3 ROM.
(ZOPO C2 Platinum 1/32)

Alcatel Pop C5 5370E bricked room needed

Hi, guys
My phone is bricked after i try install a rom from sp flash tools, my phone was without gsm signal after install cwm.
Now its bricked, i need a rom which i cant flash it with sp flash tools, because i cant enter to recovery and mobile upgrade doesnt find my phone.
Please help me.

Yhizsrhaell said:
Hi, guys
My phone is bricked after i try install a rom from sp flash tools, my phone was without gsm signal after install cwm.
Now its bricked, i need a rom which i cant flash it with sp flash tools, because i cant enter to recovery and mobile upgrade doesnt find my phone.
Please help me.
Click to expand...
Click to collapse
keep calm there is no working roms for this device and u will only go into recovery if u removed the sd card but if u flashed the official rom , the booting will take 30 min !! believe me

Use One Touch Upgrade,is a anti-breaker

emergency help nedded regarding spflashtools

Bro I have alcatel 6043d (mtk 6592) and i format my whole flash with sp flash tools and now my phone doesnot booting and not showing anything but carging led in working when coNnecting to charger......now sp flashtools not detecting my phone please tell me how to detect phone with flash tools is ....is I need new drivers or what please help me

Hard bricked my unite 2

Hey xda... My phone was stucked at bootanimation so think to flash stock rom using sp flash tool.... But i was confused in rom variant and flashed wrong rom... Now it's not booting up anymore.... And cant access fastboot also... Please help to solve this problem...:crying:

Help please...my phone is still bricked