Related
Hello everyone,
Ive seem to run into some trouble, that I cant find a solution too.
I rooted my phone with Gingerbreak V1.20, and flash my recovery with CWM.
I proceeded to add the Nightly Four E rom, than the trouble began.
My colors on the phone display are diffused and distorted, mainly showing the color green and blue.
I read thatI need to flash the stock 2.2 rom again and it would fix it but it didnt.
Can someone help me with this, its quite annoying.
Trytohaxme said:
Hello everyone,
Ive seem to run into some trouble, that I cant find a solution too.
I rooted my phone with Gingerbreak V1.20, and flash my recovery with CWM.
I proceeded to add the Nightly Four E rom, than the trouble began.
My colors on the phone display are diffused and distorted, mainly showing the color green and blue.
I read thatI need to flash the stock 2.2 rom again and it would fix it but it didnt.
Can someone help me with this, its quite annoying.
Click to expand...
Click to collapse
It's a kernel issue. From what you've stated, stock 2.2, your device never got it's official 2.3 update. So, you have an old baseband P505. You should be able to flash ROMs made specificially for the P505 as well as P500 ROMs. Since your device is old baseband, you also have the option to flash P509 ROMs. P509 never got an official GB update so it's always an old baseband device, same with the P506. The catch with P500 ROMs and most P505 ROMs is they are build for new baseband so an additional patch, old baseband, will need to be applied after flashing the ROM. P506 devices use a different touchscreen than the others so you'll have issues installing one of those ROMs.
The old baseband patch is to get your radio, cell signal, working with new baseband ROMs. I hope this wasn't information overload If you used ROM Manager, it's possible that is screwed up the radio too. ROM Manager is not friendly to the Optimus One device family. Android Flash Recovery, link in my signature, is designed for flashing recoveries via fastboot and fastboot mode. You may, especially if color banding is an issue with your recovery, want to reflash your recovery too.
Oh, and have you seen the LG Optimus One FAQ?
I appreciate the reply you've giving, but this is my first time using the Optimus One.
You stated its a kernel issue, how would I go upon fixing a kernel issue?
You also stated I should reflash the recovery, is there a specific recovery I should be using?
Trytohaxme said:
I appreciate the reply you've giving, but this is my first time using the Optimus One.
You stated its a kernel issue, how would I go upon fixing a kernel issue?
You also stated I should reflash the recovery, is there a specific recovery I should be using?
Click to expand...
Click to collapse
For the kernel issue, you can search the forums here to find some that are compatible with your device. The kernel you need will depend on the version of Android you are wanting to install since there isn't a universal kernel for all Android versions. Most of the newer kernels are for ICS( Android 4.0 ) and JB( Android 4.1, 4.2 ). I've never used it but they say Franco has a kernel for GB ( Android 2.3 ). SweetnSour has a kernel for JB and the AndroidArmv6 Team has a new 3.0 kernel for JB.
If you like GB, then you may want to look at this CM7.2 ROM( Direct download ). It is for a P500, so you will need the old baseband patch from post #9 in the LG Optimus One FAQ. I''m using that ROM on my P509 ATM.
As for the recovery, I only suggest reflashing it if you are experiencing color issues with it too. I use CWM 5.0.2.7 Touch, but it will only allow P500 ROMs to be flashed. It's no big deal for me, but for someone new to the game it can be troublesome. CWM 5.0.2.0 is also a good recovery. I don't recommend using ROM Manager to flash anything. If you should decide to reflash your recovery, I would recommend using Android Flash Recovery for Windows( in my signature ) or FlashImage GUI which can be found in the Play Store.
It seems no matter what I do, the color will not correct.
I've tried switching roms, flashing a new kernel and recovery nothing seems to be working..
Trytohaxme said:
It seems no matter what I do, the color will not correct.
I've tried switching roms, flashing a new kernel and recovery nothing seems to be working..
Click to expand...
Click to collapse
Do you still have a backup of your stock ROM? I mean a backup that was made while in recovery mode. If you do you can try booting in to recovery and then try wiping and formatting everything but your sdcard. Then restore the backup you made and reboot the device. Other than that, I hate to say it, but I'm at a loss.
I just flashed the CM 7.2 ROM, and franco.Kernel | 2.6.35.10.
I just about did everything, but the color remains distorted once the actual ROM boots up.
Note* If the phone is off and I power it on, the first LG logo has perfect color and clarity but once the ROM kicks in the colors wacks out.
Edit - The phone no longer allows me to access CWM it's just a black screen.
Trytohaxme said:
I just flashed the CM 7.2 ROM, and franco.Kernel | 2.6.35.10.
I just about did everything, but the color remains distorted once the actual ROM boots up.
Note* If the phone is off and I power it on, the first LG logo has perfect color and clarity but once the ROM kicks in the colors wacks out.
Click to expand...
Click to collapse
The kernel is part of the boot image. It's possible that somehow your partitions have been damaged.
---------- Post added at 06:30 PM ---------- Previous post was at 06:27 PM ----------
Trytohaxme said:
I just flashed the CM 7.2 ROM, and franco.Kernel | 2.6.35.10.
I just about did everything, but the color remains distorted once the actual ROM boots up.
Note* If the phone is off and I power it on, the first LG logo has perfect color and clarity but once the ROM kicks in the colors wacks out.
Edit - The phone no longer allows me to access CWM it's just a black screen.
Click to expand...
Click to collapse
Hmm. I'm about convinced there's something wrong with your partition tables. Your data is getting corrupted.
So basically I just ruined the phone?
Trytohaxme said:
So basically I just ruined the phone?
Click to expand...
Click to collapse
Yes and no. If you can find or get a hold of the partition.mbn for your device you can use LGMDP to repair the partitions. The P500 one might work too, I'm not sure tho.
EDIT:
You can also install a recovery and ROM in the same process with LGMDP
shinobisoft said:
Yes and no. If you can find or get a hold of the partition.mbn for your device you can use LGMDP to repair the partitions. The P500 one might work too, I'm not sure tho.
EDIT:
You can also install a recovery and ROM in the same process with LGMDP
Click to expand...
Click to collapse
Yeah, I'm screwed I have no idea how to do that so I'm just gonna have to buy a new phone.. :crying:
Im sorry didn't read too well, bad luck, i didn't read your posts before, i knew how to fix the blue colors on your screen
gabo_lope said:
Im sorry didn't read too well, bad luck i didn't read your posts before i knew how to fix the blue colors on your screen
Click to expand...
Click to collapse
Well how exactly do you fix the screen color than?
Trytohaxme said:
Well how exactly do you fix the screen color than?
Click to expand...
Click to collapse
you only had to flash this on your p505 after the rom https://code.google.com/p/sweetnsour-kernel/downloads/list; one of these
kernel-20130224_1312.zip version4-CFS-P505-P506 for battery life
kernel-20130224_1306.zip version4-BFS-P505-P506 for performance
You have saved my phone my good sir, and I thank you greatly!
Now that I have the correct kernel, can I install different roms now?
Yes, but only ics and jellybean roms , if you use the kernel on gingerbread you will get a lot of troubles...
I just flashed the unofficial CM 10.1, and booted the phone and the color was diffused again.
So I flashed the kernel again and booted the phone, and everything is working perfectly.
Thank you so much!
P.S - CM 10.1 doesn't come with Google Apps or Rom manager, how do I get that back?
To get the google apps you will need to flash a gapps.zip, but first you need to trim the cm 10.1 rom, because
The recommended gapps package is not quite small enough to fit along with the rom in our limited /system partition. The size of the rom can be trimmed by deleting or converting some system apps to user apps, deleting unwanted ringtones and fonts.
Click to expand...
Click to collapse
Also
Take off anything that can be installed from Play, same for gapps.zip!!
Click to expand...
Click to collapse
There is a tool designed for that, is in shinobisoft's signature, oone rom editor, download that tool and in the help docs you will find information about trimming, and what can be removed safely... Here it is http://forum.xda-developers.com/showthread.php?t=1959023
If this the first time you are installing roms, i will recommmend you to stay in ice cream sandwich, because is more stable, and it has a lot better battery life than jellybean...
Hi all,
First is my special thank to Dhollmen Rom dev team and AOSPA dev team, their roms is great.
But my problem here:
I have galaxy tab 2 10.1 - P5100 (3G + wifi). when i flash 2 rom from:
- Dhollmen
- AOSPA
or every rom on this forum,except stock rom or some build from stock, i can't connect to internet by 3G! I don't know why, I follow the intructions to flash rom, but the error still there.
My second problem is while i flash AOSPA rom, although i connected to my wifi, i can use internet but i can log in to Google play, the error said:
Can't establish a reliable connection to the sever
This could be a temporary problem or your Android device may not be provisioned for data services. If it continues, call Customer Care
I'm from VietNam and using VietNammobile mobile.
Finally, many thanks to you guys.
cuimiachien said:
Hi all,
First is my special thank to Dhollmen Rom dev team and AOSPA dev team, their roms is great.
But my problem here:
I have galaxy tab 2 10.1 - P5100 (3G + wifi). when i flash 2 rom from:
- Dhollmen
- AOSPA
or every rom on this forum,except stock rom or some build from stock, i can't connect to internet by 3G! I don't know why, I follow the intructions to flash rom, but the error still there.
My second problem is while i flash AOSPA rom, although i connected to my wifi, i can use internet but i can log in to Google play, the error said:
Can't establish a reliable connection to the sever
This could be a temporary problem or your Android device may not be provisioned for data services. If it continues, call Customer Care
I'm from VietNam and using VietNammobile mobile.
Finally, many thanks to you guys.
Click to expand...
Click to collapse
Are you "dirty flashing from one rom to another?
Do You have the correct Gapps for that Rom if needed?
Are you flashing the right version of the kernel for that rom? Modems ect
mrwetwork said:
Are you "dirty flashing from one rom to another?
Do You have the correct Gapps for that Rom if needed?
Are you flashing the right version of the kernel for that rom? Modems ect
Click to expand...
Click to collapse
i do FULL WIPE - INSTALL pa_p51XX-X.9X.zip - INSTALL GAPPS.
rom and Gapps i download from this link.
i choose right version for my device P5100.
About kernel, i don't know it use for, in the topic above, they not mention that flash another kernel.
you might want to wipe the cache and the dalvik under advanced tab.
what kind of custom recovery are you using?
Are you flashing through adb?
mrwetwork said:
you might want to wipe the cache and the dalvik under advanced tab.
what kind of custom recovery are you using?
Are you flashing through adb?
Click to expand...
Click to collapse
i did it too, wipe the cache...
i use CWM 6.0.1.2 touch
i flash through recovery mode
cuimiachien said:
i did it too, wipe the cache...
i use CWM 6.0.1.2 touch
i flash through recovery mode
Click to expand...
Click to collapse
Try to re download the file, could have been a bad file.
or go back to completely stock rooted and try a different custom rom, not all roms play well with devices.
do you know how to logcat?
mrwetwork said:
Try to re download the file, could have been a bad file.
or go back to completely stock rooted and try a different custom rom, not all roms play well with devices.
do you know how to logcat?
Click to expand...
Click to collapse
Can you show me how to logcat?
cuimiachien said:
Can you show me how to log cat?
Click to expand...
Click to collapse
I would start reading and researching XDA for the answer. XDA is a wealth of information.
START HERE http://forum.xda-developers.com/forumdisplay.php?f=1596
Search the forums for the issue your having, start with the basics.. adb and log cat is android 101. You need to understand the right way and the wrong way of flashing custom roms, recovery's, kernels before you hard brick your device. :crying: TRUST ME IVE DONE IT!! It can get ugly..
Only after 100s of hours spent reading forums and trying to understand the principals of flashing,
mrwetwork said:
I would start reading and researching XDA for the answer. XDA is a wealth of information.
START HERE http://forum.xda-developers.com/forumdisplay.php?f=1596
Search the forums for the issue your having, start with the basics.. adb and log cat is android 101. You need to understand the right way and the wrong way of flashing custom roms, recovery's, kernels before you hard brick your device. :crying: TRUST ME IVE DONE IT!! It can get ugly..
Only after 100s of hours spent reading forums and trying to understand the principals of flashing,
Click to expand...
Click to collapse
I tried all day but nothing get better! Can someone help me in this case?
Hi guys, I'm fckland and I'm relatively new here since I never write but I always come here when I need something
This time I come here with a doubt. I got the motorola xt1032 and it's awesome, I have unlocked the bootloader and rooted it and installed CWM to flash some ROM's, but they didn't worked and bricked my phone, so I had to install google play edition by fastboot (following this guide: http://forum.xda-developers.com/showthread.php?t=2542219 ) and now when I hit "install zip from sdcard" it says: e:\ can't mount sdcard
I want to access that option to install the faux kernel to test it but i can't. What can I do to fix it? I have searched and I didn't find nothin specific for the motorola moto G.
While I was writing this, I installed the TWRP and it worked! I had access to the internal memory without any issue!
BUT I HAD AN ISSUE
I installed the faux kernel with the OC to 1.6GHz and it bricked the OS (google play edition) (stuck at bootanimation), I installed the other version, the non OC and it bricked too and I had to do the tutorial once again since i didn't do a backup
And my second question is... Why this moto g doesn't accept most ROM's and kernels? I have tried with ROM: Carbon, AOSP, MOKEE and none worked and Kernels: faux version u and m and none worked, all of them bricked my phone.
If you need details of the version of my phone or something please ask for it and I'll upload it.
Thank you very much.
Nobody? I need to know at least why I can't install ROM's without having lots of issues.
Post details.
Please post details of which recovery you are using to flash ROMs, which kernel you are on and lastly which ROM works fine and which doesn't.
I, personally think you might had been on philz recovery and issue is not only which /sdcard but with /data.
Post the required info and I'll get back to you.
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Stick with the original kernel.
fckland said:
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Click to expand...
Click to collapse
It's nice that your problem is resolved. And for the kernel as far as I know faux and pink support only stock ROM, no support for CM11 yet. You can search the thread for any other kernel but I would recommend to stick to default kernel now. Moto G is still under huge development, have patience. Soon we'll have a lot of them.
Regarding bootloops, take care that before installing any Rom you format /system along with wipe cache and data. Mount them again and then flash the rom.If any other help needed then post it.
P.S. No need to say Thanks press Thank you instead.
fckland said:
Problem solved!
I don't know what the problem was, but I think that I wasn't formating well after installing ROM's.
I have installed CM11 minutes ago and it works really nice (with wifi, I didn't try 3G yet) but I have a stock kernell and I would love to install faux or pink kernell, how do I have to do exactly to install one of them? And what can I do if i get bootloop?
Thank you!
Click to expand...
Click to collapse
i had also same problem with my moto g...
just u guide me how u solve this problem....?
im unable to instal stock, CWM, and TWRP recovery mode on it... Except philz_touch_6.41.6-moto_falcon..
plz help me
vardhanram said:
i had also same problem with my moto g...
just u guide me how u solve this problem....?
im unable to instal stock, CWM, and TWRP recovery mode on it... Except philz_touch_6.41.6-moto_falcon..
plz help me
Click to expand...
Click to collapse
Why you can't?
Hi all,
Did anyone able to use gps with custom rom ( I would say CM base). I research and try everything that's I could find here but not success.
Every time I do clean wipe everything including a internal storage. So that will nothing left behind.
I know that stock is work fine with gps. some said that install and replace stock but I have no idea that what file will left in our device when we delete all.
Always had the same problem when running Paranoid Android (not tried other ROMs). Had to return to stock, where GPS runs fine. Would also love to kknow how people have got it functioning.
I am trying too. I modified gps.conf files, tried some workarounds mentioned in cm11 thread like restoring GPS Status backup from stock with titanium so far with no success. Some people say that it works but it doesn't on mine whatever I do.
I run on CM and I don't have any problem. Everything works fine with gps and I didn't use any fix or something similar.
I'm on CM 11-20140627 and I have 1032 phone.
Interesting, why does it work on some while it doesn't on others? Maybe some variants are having problems...
I have xt1033 asia version.
spajdo said:
I run on CM and I don't have any problem. Everything works fine with gps and I didn't use any fix or something similar.
I'm on CM 11-20140627 and I have 1032 phone.
Click to expand...
Click to collapse
Which recovery did you use?
CWM
As I wonder is about library missing or some partition need from stock ?
I've also been using the micro gapps package, would this matter?
I had problems with Paranoid Android and GPS too... If anyone know something about that, please comment!
TMaxtor said:
I had problems with Paranoid Android and GPS too... If anyone know something about that, please comment!
Click to expand...
Click to collapse
Hey i found a solution, you have do this flash following in this order.
- flash stock 4.4.4 (depend on your current)
- flash cm
- flash gapp
I try this twice and work like a charm.
Sent from my Moto G using XDA Free mobile app
thestory101 said:
Hey i found a solution, you have do this flash following in this order.
- flash stock 4.4.4 (depend on your current)
- flash cm
- flash gapp
I try this twice and work like a charm.
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
I am having he same problem on XT1032 running Carbon ROM. GPS worked fine on stock, no signal with Carbon.
I found many answers saying to flash stock and then reflash custom ROM. I will try it, but I wonder, how does this help? Isn't the phone restoring the whole system? Do I have to keep the gps.conf from stock?
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
am05 said:
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
Click to expand...
Click to collapse
Did you wipe anything, like Dalvik, Cache and Data, or you just flashed it over?
am05 said:
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
Click to expand...
Click to collapse
Sorry people, I was so happy to have my phone back working, I forgot to write it back here.
Yes it worked indeed, all I did was flashing back the stock, going outside to have a gps lock with gmaps, then re-flashing back the Carbon. I also kept a copy of the gps.conf, but I never needed it, the GPS got a fix quickly. Working fine so far, it only takes some tens of seconds to fix, from time to time.
I can't remember if I also did all the wiping, I think I didn't, but I made so many trials in a couple days, I am not sure.
Thanks a lot guys!
am05 said:
I've read in some CM thread on here you need to flash stock ROM then enable GPS and get a lock. Once you've done that then flash your custom rom. Sounds STUPID and dosent make sense I know, but a lot of people say this is how they got it to work.
EDIT: I can confirm. I've just flashed stock 4.4.4 and played around with google maps. Flashed CM11 nightly and my GPS is now working ok
Click to expand...
Click to collapse
Yes, this worked for me too on PA.
I couldn't even see a single sat (it wasn't just a lock problem). No matter with gps patch, gpx fix app, or gps.conf I used.
What I did?: Back to stock, lock GPS, flash again the custom ROM (but don't wipe /system!).
Good luck on that guys, it should work for you too.
thestory101 said:
Hi all,
Did anyone able to use gps with custom rom ( I would say CM base). I research and try everything that's I could find here but not success.
Every time I do clean wipe everything including a internal storage. So that will nothing left behind.
I know that stock is work fine with gps. some said that install and replace stock but I have no idea that what file will left in our device when we delete all.
Click to expand...
Click to collapse
GPS works fine on this unofficial CM11 rom for me. Stable daily driver rom for me, YMMV.
General advice is to:
- make sure you get a GPS lock on stock rom first
- flash CM11 (or other custom rom)
There may not be a file left on the device. it may just be that stock contains the code to initialize the GPS functionality on the SoC or chipset firmware. Whatever, it works...
Hello.
My problem is that sometimes, when I receive a notification, ambient display turns screen on to show it (as it should do normally), but then, when it is supposed to turn screen off again, it only goes black, but the backlight is still on. It's hard to notice, but I don't want the backlight on, using battery, when I think it's off.
The only way to turn it off is by activating ambient display again (moving the phone, waving in front of proximity sensor, pressing power button), and then it would show my normal lock screen and then turn off, until "something" makes it leave the backlight on again.
Anyone have/had/knows this issue? I've used Mokee ROM, now I'm on RR and it happened on both, I don't remember if it happened in CM. Could it be something app related?
Thanks.
Yeah same happened with cm 12.1 latest nightly too.....just checked it now...
The Answer
Hi there !
When you have installed the custom rom, you have probably flashed directly from another custom rom , is this correct?
If so, it may be your phones drivers slightly messed up at the moment seeing as it has different parts from other roms, depending on how you flashed it.
My solution would be to flash the stock firmware , which can easily be found in the forums, and then flash twrp, then your rom of choice. If that doesn't work, its likely a bug in that specific build of the rom you are installing , seeing as another person who has replied has had the same problem .
therealduff1 said:
Hi there !
When you have installed the custom rom, you have probably flashed directly from another custom rom , is this correct?
If so, it may be your phones drivers slightly messed up at the moment seeing as it has different parts from other roms, depending on how you flashed it.
My solution would be to flash the stock firmware , which can easily be found in the forums, and then flash twrp, then your rom of choice. If that doesn't work, its likely a bug in that specific build of the rom you are installing , seeing as another person who has replied has had the same problem .
Click to expand...
Click to collapse
That's strange! I guess it may be something like the drivers you said, because just one user said that have the same problem, but I'll have to wait until I have some free time to flash stock and root and flash CM and restore all apps and that again... I hate that part of installing another ROM.
therealduff1 said:
Hi there !
When you have installed the custom rom, you have probably flashed directly from another custom rom , is this correct?
If so, it may be your phones drivers slightly messed up at the moment seeing as it has different parts from other roms, depending on how you flashed it.
My solution would be to flash the stock firmware , which can easily be found in the forums, and then flash twrp, then your rom of choice. If that doesn't work, its likely a bug in that specific build of the rom you are installing , seeing as another person who has replied has had the same problem .
Click to expand...
Click to collapse
I flashed stock using fastboot and then RR but the problem persists... Any other ideas??
Secuential said:
I flashed stock using fastboot and then RR but the problem persists... Any other ideas??
Click to expand...
Click to collapse
Ok, I have spent some time thinking about this one for you, as I really want you to get this one fixed!
Although I need abit more information.
1) Does the issue occur on stock rom?
2)Are you sure it is not a problem with the build you are running?
3)What exact steps did you use to flash the rom?
To show that you appreciate my help so far, please click thanks
therealduff1 said:
Ok, I have spent some time thinking about this one for you, as I really want you to get this one fixed!
Although I need abit more information.
1) Does the issue occur on stock rom?
2)Are you sure it is not a problem with the build you are running?
3)What exact steps did you use to flash the rom?
To show that you appreciate my help so far, please click thanks
Click to expand...
Click to collapse
Thanks!
1)I can't tell if it occurs on stock, because on stock I use moto display (which doesn't have this issue).
2) I'm almost sure, because I've used 2 ROMs and both do the same. Maybe I'll have to try with CM nightlies?
3)I followed the guide in "general" section to flash stock using fastboot and android sdk. After that, I booted on stock, then rebooted to bootloader, flashed TWRP, entered to recovery, wiped data and then flashed RR ROM with it's gapps and then flashed moto camera and gallery. After that, wipe dalvik and cache and rebooted to system.
Right , ok. I recommend trying one of the cm12 nightly builds, seeing as they worked on my phone fine in terms of ambient display
therealduff1 said:
Right , ok. I recommend trying one of the cm12 nightly builds, seeing as they worked on my phone fine in terms of ambient display
Click to expand...
Click to collapse
Well, the other user that commented on this post was also using latest CM nightly, so I'm not very positive about it, but I may try it when I have time.
Well , looking at all of the information In this post , I think it is safe to say ambient display is not fully working on many roms :/
I installed a new build of cm12 earlier, and I found that sometimes the backlight will stay on , but other times it is fine.
If you want to work on this together, email me at [email protected] , and then we can look into it abit further ?
I will take a thorough look into the forums to see if others are recieving any problems as well .
therealduff1 said:
Well , looking at all of the information In this post , I think it is safe to say ambient display is not fully working on many roms :/
I installed a new build of cm12 earlier, and I found that sometimes the backlight will stay on , but other times it is fine.
If you want to work on this together, email me at [email protected] , and then we can look into it abit further ?
I will take a thorough look into the forums to see if others are recieving any problems as well .
Click to expand...
Click to collapse
Thanks! I have a lot of work right now, so I can't work with this now, but I'll email you when I have more free time!