Database Info

[Q] NexusS (i9020T) hard bricked, at which step did I go wrong?

Hi everyone, I had a problem with my previous nexus s (I have since gotten a working replacement) and I was wondering where exactly I messed up so in the future I can avoid this
Here is what I did on my previous phone:
1. I flashed ics onto my device from the ota update package from androidcentral, it was 4.0.3. (This worked great and I had it on my phone for 2-3 months before I tried the next steps.)
2. I rooted my device successfully using the guide at nexusshacks.
3. I also flashed TWRP recovery (fastboot) and superuser using the above guide/links
4. When I would turn off my phone it would boot to a screen with a red triangle and an opened android bot. So what I would have to do is flash twrp recovery everytime I turned the phone on just to get it to work.
5. What I wanted to do was keep the stock rom but still have twrp recovery without it making me reflash it on every boot. So I clicked install and tried to flash the stock rom (update package from the link in step 1) with twrp recovery. It then turned off my phone and hard bricked it. I couldn't turn it on anymore and a new battery didn't fix it.
I was able to get a replacement now and I was just wondering at which step did I go wrong? I THINK that I should have wiped my cache before I tried to reflash the stock rom but maybe I'm way off base here. This is why I posted a question here so hopefully some of you guys can help.
I did think about posting in another thread, but I didn't wanna threadjack or anything... and his problem also seemed a bit different then mine. Also, sorry about not being able to provide the specific links it won't let me post them until I've posted 8 times.

I don't know for sure but team win recovery has been reported to corrupt the device's efs directory. I've even had problems myself using clockwork recovery. I've moved on to razor recovery and haven't looked back.
This is the most flash-friendly phone I've ever owned, and razor recovery rivals amon ra (which was awesome on my g1 and evo). I really think it may have just been the recovery you were using... Somebody correct me if i'm wrong.
Sent from my Nexus S 4G using Tapatalk

I had once corrupted one of the partition. I fixed to by flashing stock recovery and stock rom.
Use adam outler's unbrickable mod tool. It can be found in android development section.
Sent from my Nexus S using XDA

Thanks for the replies.
That's interesting about twrp... I didn't know that. Truth be told, the only reason I went for it over other ones like clockwork mod was because the UI looked pretty nice and easy to use. Also the guide I followed at nexusshacks used that, so I wanted to stay consistent with it.
jishnu7, it's a little late for that now however as I actually have already received a working replacement from my carrier, but in the future if something ever does go wrong (hopefully not) I will definitely check that out.
The main thing I'm wondering is if it messed up because I tried to reflash the stock rom essentially over top itself (was hoping that by doing that, it would stop making me reflash twrp on every reboot) or if it was because I didn't wipe the cache before the flash.
Also, what I really wanted to do with my phone was to keep the stock rom but be able to overclock my cpu/gpu. I was hoping I could set different overclocks for different things (I've heard of kernels where you can downclock your phone when the screens off and have it overclocked slightly while you're using it, that would be something I'd like to have). I figured to install those kernels I would have to root my phone, replace stock recovery and install superuser so that's why I tried to do that. Once again, I'm pretty new to all this stuff for my phone.

Sorry to bump this thread again, but I would really like to know how I could avoid what happened to me for the future. I think it's because I flashed the stock 4.0.3 rom over itself (was hoping that by doing that twrp recovery would stay on the phone after reboot).
What I would like to do is install something like CM9 or AOKP and use the Matr1x kernel so I could undervolt or overclock my phone.

I seriously dont get how u hard bricked your phone...
the reason you are thinking is you reflashed stock rom without wiping cache, as per my experiece its not at all the reason
now, whats my experience??
...I have some fault with my nexus device and I'm working on it,,and I did everything I could do...one of the thing out of those things was reflashing stock rom without wiping,and i did it quite a several times...my device never hard bricked,,however it was soft bricked for many times,,and i recovered from it
so reflasing a stock rom over stock rom, over ICS, over some themed custom rom,will not hard brick your device, you must be missing something none of your steps sounds suspecious
P.S:- pulling out battey while flashing something like this sounds suspecious, never tried though

I'm not sure what happened either to be quite honest with you. Since giving it another shot now with my new fresh phone I have had great success!
I did everything I wanted to do all in one go. Rooted it, install CWM touch, install AOKP (went with milestone 4 cuz I heard newest build 29 has some bugs) + gapps and installed matr1x kernel 18.5 bfs.
The only thing I did different from last time was installing CWM touch (instead of twrp) and flashed aokp this time (instead of reflashing 4.0.3 over itself).

I would just avoid step 2 at all cost.
The nexus s hacks dude is a tool.

LG Phoenix - Distorted Colors

Hello everyone,
Ive seem to run into some trouble, that I cant find a solution too.
I rooted my phone with Gingerbreak V1.20, and flash my recovery with CWM.
I proceeded to add the Nightly Four E rom, than the trouble began.
My colors on the phone display are diffused and distorted, mainly showing the color green and blue.
I read thatI need to flash the stock 2.2 rom again and it would fix it but it didnt.
Can someone help me with this, its quite annoying.

Trytohaxme said:
Hello everyone,
Ive seem to run into some trouble, that I cant find a solution too.
I rooted my phone with Gingerbreak V1.20, and flash my recovery with CWM.
I proceeded to add the Nightly Four E rom, than the trouble began.
My colors on the phone display are diffused and distorted, mainly showing the color green and blue.
I read thatI need to flash the stock 2.2 rom again and it would fix it but it didnt.
Can someone help me with this, its quite annoying.
Click to expand...
Click to collapse
It's a kernel issue. From what you've stated, stock 2.2, your device never got it's official 2.3 update. So, you have an old baseband P505. You should be able to flash ROMs made specificially for the P505 as well as P500 ROMs. Since your device is old baseband, you also have the option to flash P509 ROMs. P509 never got an official GB update so it's always an old baseband device, same with the P506. The catch with P500 ROMs and most P505 ROMs is they are build for new baseband so an additional patch, old baseband, will need to be applied after flashing the ROM. P506 devices use a different touchscreen than the others so you'll have issues installing one of those ROMs.
The old baseband patch is to get your radio, cell signal, working with new baseband ROMs. I hope this wasn't information overload If you used ROM Manager, it's possible that is screwed up the radio too. ROM Manager is not friendly to the Optimus One device family. Android Flash Recovery, link in my signature, is designed for flashing recoveries via fastboot and fastboot mode. You may, especially if color banding is an issue with your recovery, want to reflash your recovery too.
Oh, and have you seen the LG Optimus One FAQ?

I appreciate the reply you've giving, but this is my first time using the Optimus One.
You stated its a kernel issue, how would I go upon fixing a kernel issue?
You also stated I should reflash the recovery, is there a specific recovery I should be using?

Trytohaxme said:
I appreciate the reply you've giving, but this is my first time using the Optimus One.
You stated its a kernel issue, how would I go upon fixing a kernel issue?
You also stated I should reflash the recovery, is there a specific recovery I should be using?
Click to expand...
Click to collapse
For the kernel issue, you can search the forums here to find some that are compatible with your device. The kernel you need will depend on the version of Android you are wanting to install since there isn't a universal kernel for all Android versions. Most of the newer kernels are for ICS( Android 4.0 ) and JB( Android 4.1, 4.2 ). I've never used it but they say Franco has a kernel for GB ( Android 2.3 ). SweetnSour has a kernel for JB and the AndroidArmv6 Team has a new 3.0 kernel for JB.
If you like GB, then you may want to look at this CM7.2 ROM( Direct download ). It is for a P500, so you will need the old baseband patch from post #9 in the LG Optimus One FAQ. I''m using that ROM on my P509 ATM.
As for the recovery, I only suggest reflashing it if you are experiencing color issues with it too. I use CWM 5.0.2.7 Touch, but it will only allow P500 ROMs to be flashed. It's no big deal for me, but for someone new to the game it can be troublesome. CWM 5.0.2.0 is also a good recovery. I don't recommend using ROM Manager to flash anything. If you should decide to reflash your recovery, I would recommend using Android Flash Recovery for Windows( in my signature ) or FlashImage GUI which can be found in the Play Store.

It seems no matter what I do, the color will not correct.
I've tried switching roms, flashing a new kernel and recovery nothing seems to be working..

Trytohaxme said:
It seems no matter what I do, the color will not correct.
I've tried switching roms, flashing a new kernel and recovery nothing seems to be working..
Click to expand...
Click to collapse
Do you still have a backup of your stock ROM? I mean a backup that was made while in recovery mode. If you do you can try booting in to recovery and then try wiping and formatting everything but your sdcard. Then restore the backup you made and reboot the device. Other than that, I hate to say it, but I'm at a loss.

I just flashed the CM 7.2 ROM, and franco.Kernel | 2.6.35.10.
I just about did everything, but the color remains distorted once the actual ROM boots up.
Note* If the phone is off and I power it on, the first LG logo has perfect color and clarity but once the ROM kicks in the colors wacks out.
Edit - The phone no longer allows me to access CWM it's just a black screen.

Trytohaxme said:
I just flashed the CM 7.2 ROM, and franco.Kernel | 2.6.35.10.
I just about did everything, but the color remains distorted once the actual ROM boots up.
Note* If the phone is off and I power it on, the first LG logo has perfect color and clarity but once the ROM kicks in the colors wacks out.
Click to expand...
Click to collapse
The kernel is part of the boot image. It's possible that somehow your partitions have been damaged.
---------- Post added at 06:30 PM ---------- Previous post was at 06:27 PM ----------
Trytohaxme said:
I just flashed the CM 7.2 ROM, and franco.Kernel | 2.6.35.10.
I just about did everything, but the color remains distorted once the actual ROM boots up.
Note* If the phone is off and I power it on, the first LG logo has perfect color and clarity but once the ROM kicks in the colors wacks out.
Edit - The phone no longer allows me to access CWM it's just a black screen.
Click to expand...
Click to collapse
Hmm. I'm about convinced there's something wrong with your partition tables. Your data is getting corrupted.

So basically I just ruined the phone?

Trytohaxme said:
So basically I just ruined the phone?
Click to expand...
Click to collapse
Yes and no. If you can find or get a hold of the partition.mbn for your device you can use LGMDP to repair the partitions. The P500 one might work too, I'm not sure tho.
EDIT:
You can also install a recovery and ROM in the same process with LGMDP

shinobisoft said:
Yes and no. If you can find or get a hold of the partition.mbn for your device you can use LGMDP to repair the partitions. The P500 one might work too, I'm not sure tho.
EDIT:
You can also install a recovery and ROM in the same process with LGMDP
Click to expand...
Click to collapse
Yeah, I'm screwed I have no idea how to do that so I'm just gonna have to buy a new phone.. :crying:

Im sorry didn't read too well, bad luck, i didn't read your posts before, i knew how to fix the blue colors on your screen

gabo_lope said:
Im sorry didn't read too well, bad luck i didn't read your posts before i knew how to fix the blue colors on your screen
Click to expand...
Click to collapse
Well how exactly do you fix the screen color than?

Trytohaxme said:
Well how exactly do you fix the screen color than?
Click to expand...
Click to collapse
you only had to flash this on your p505 after the rom https://code.google.com/p/sweetnsour-kernel/downloads/list; one of these
kernel-20130224_1312.zip version4-CFS-P505-P506 for battery life
kernel-20130224_1306.zip version4-BFS-P505-P506 for performance

You have saved my phone my good sir, and I thank you greatly!
Now that I have the correct kernel, can I install different roms now?

Yes, but only ics and jellybean roms , if you use the kernel on gingerbread you will get a lot of troubles...

I just flashed the unofficial CM 10.1, and booted the phone and the color was diffused again.
So I flashed the kernel again and booted the phone, and everything is working perfectly.
Thank you so much!
P.S - CM 10.1 doesn't come with Google Apps or Rom manager, how do I get that back?

To get the google apps you will need to flash a gapps.zip, but first you need to trim the cm 10.1 rom, because
The recommended gapps package is not quite small enough to fit along with the rom in our limited /system partition. The size of the rom can be trimmed by deleting or converting some system apps to user apps, deleting unwanted ringtones and fonts.
Click to expand...
Click to collapse
Also
Take off anything that can be installed from Play, same for gapps.zip!!
Click to expand...
Click to collapse
There is a tool designed for that, is in shinobisoft's signature, oone rom editor, download that tool and in the help docs you will find information about trimming, and what can be removed safely... Here it is http://forum.xda-developers.com/showthread.php?t=1959023
If this the first time you are installing roms, i will recommmend you to stay in ice cream sandwich, because is more stable, and it has a lot better battery life than jellybean...

[Q] How to de-brick rooted P5110 that keeps rebooting after startup animation (boot)

As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?

Do you have nandroid backup(one that you make with cwm)? If yes go to backup and restore in cwm and hit restore....if not try to reflash rom via cwm or flash stock rom via odin in dowload mode.
emmc is.... http://www.simmtester.com/page/news/showpubnews.asp?num=181

Starojitski said:
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Click to expand...
Click to collapse
If you have nandroid backup.. Just restore it.. Or else download a stock firmware and flash it via odin.. gud luck:good:

flash another rom !!

mythi said:
flash another rom !!
Click to expand...
Click to collapse
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.

Flash via Odin any stock ROM then root it and flash whatever you like.
This kind of brick may occur easily if you have flashed uncompatible kernel or tried to restore nandroid backup of another ROM or made by uncompatible CWM recovery version.
Sent from my GT-P5110 using XDA Premium HD app

Solved?
dartd27 said:
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Click to expand...
Click to collapse
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).

tetakpatak said:
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
Click to expand...
Click to collapse
Thank you for the reply. I had posted a link in here that linked to my thread that explained what i had done and used but it didnt show up for some reason? Anyway I used the below roms(in bold). An update was available for JB and we own two tablets both the P5113 and bought at the same time. One tablet updated fine but the other one would download the package but then would keep failing to install it. So i did a factory reset on the device and then that's when the fun began and it started booting strange.
So I first tried flashing the official JB rom using ODin 3.04.
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
and it still did the same thing so then i tried flashing it back to ICS which is the rom that was on there i think. (It was ICS but not sure if that was the exact version number?)
P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
Im sure the roms are going on there fine as if im not mistaken ICS has a blue battery charge icon and JB a gold one. I noticed that it went from blue to gold when i first loaded the 4.1.1 on there and then back to blue when i put ICS back on there.
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
I tried it anyway and it didnt work

dartd27 said:
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
Click to expand...
Click to collapse
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp

tetakpatak said:
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
Click to expand...
Click to collapse
I hear you Its a paper weight right now though so thought id rather try as nothing else is doing the trick.
The tablets are my kids so i preferred to just give them an official stock version. I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics. I now run stock jelly bean on my GS2 but even that has crappy battery life, lucky for it to make it till 4pm and still be on and thats with moderate use. Couple of phone calls and a few text messages and a tiny bit or browsing. I know what is causing it though as it only starts to lose battery when im not on wi fi. It at least doesnt freeze and stop receiving phone calls altogether like PA did though. I used to miss a ton of work calls because the phone had actually frozen.
I love Apex though. I have Apex pro on my GS2 and its much better then the standard launcher. My daughter has the GS3 and it still does not rotate on the home and app screens which i find annoying.

dartd27 said:
I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics.
Click to expand...
Click to collapse
I've got your point, mate. :good:
Same with me: I need all the functions to work. The CM10.1 does it really, but my p5110 is wifi-only device so I'm not sure if CM10.1 is same good for your p5113. CM10.2 seems to be smooth and fast, but many apps aren't yet updated for 4.3 so I will wait a while before I flash it again.

I have cm10.1 on my p5113...it runs amazing...the p5113 owners most of the time have to flash the p5110 version because there is nothing different with the tabs besides the ir port..
Sent from my GT-P5110 using xda app-developers app

help me
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??

obeye said:
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
Click to expand...
Click to collapse
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....

tetakpatak said:
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
Click to expand...
Click to collapse
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on

obeye said:
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
Click to expand...
Click to collapse
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs

tetakpatak said:
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
Click to expand...
Click to collapse
Thanks mate!
already done!!
its work!
thank you so much!!

obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
Great, I am glad to hear it did charger cable trick help?
Just to make sure: you must be sure to flash a stock ROM first (not JB based custom ROM), after it you will have revived Tab without root. After that normal proceeding: root it, install CWM recovery or custom kernel that fits your ROM (or even whole custom ROM) which already features the CWM recovery.
The stock recovery (3e) checks the signature so of course you can't flash any custom zips. CWM recovery has an option "toggle signature verification" where one can disable signature check. Then you can flash whatever you want, just take care that all you ever flash must be absolutely compatible for your device.
---------- Post added at 03:45 PM ---------- Previous post was at 03:21 PM ----------
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
One more thing mate, look at this video which I've posted on YouTube last January:
http://www.youtube.com/watch?v=0NXBN9Z63TY
It describes how to get rid of the signature verification problem. For the reason that quite many people don't understand english well, I have made a speechless video added by step by step description in the text (video description) so people can just copy the text and paste it into their translators.
If one ROM that you have flashed bootloops on the logo just try another ROM. It happens sometimes. Important is that you should always before flashing another ROM make full wipe: (data/factory reset/cache/dalvik) in your recovery mode.
Did you do it?
Please let me know if you were successful, it should work now! Good luck :fingers-crossed:

It works!
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
After that i rooted it again, installed another recovery and now have the latest stock rom working perfectly.
For those who get the same problem and the tabled keeps rebooting - just plug it into recharger and keep the on/off button until it turns off. Then you can fully charge it before you attempt to flash rom.
Once again, thanks a lot!
PS. now i am considering installing CM10.1

Starojitski said:
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
PS. now i am considering installing CM10.1
Click to expand...
Click to collapse
Great! Congratulations
Yes, install CM10.1.1 with gapps for 4.2.2 it works great, all the functions. Just mind that you can not restore nandroid backups made with other kernel, (sometimes also not if done with older CWM recovery version) and also apps backups made by Titanium backups in older systems aren't good idea to restore once you upgrade to CM10x
If you want to return for any reason to your old (current) ROM, do the same procedure like by unbricking

HELP ME about my galaxy tab 2 and rom

Hi all,
First is my special thank to Dhollmen Rom dev team and AOSPA dev team, their roms is great.
But my problem here:
I have galaxy tab 2 10.1 - P5100 (3G + wifi). when i flash 2 rom from:
- Dhollmen
- AOSPA
or every rom on this forum,except stock rom or some build from stock, i can't connect to internet by 3G! I don't know why, I follow the intructions to flash rom, but the error still there.
My second problem is while i flash AOSPA rom, although i connected to my wifi, i can use internet but i can log in to Google play, the error said:
Can't establish a reliable connection to the sever
This could be a temporary problem or your Android device may not be provisioned for data services. If it continues, call Customer Care
I'm from VietNam and using VietNammobile mobile.
Finally, many thanks to you guys.

cuimiachien said:
Hi all,
First is my special thank to Dhollmen Rom dev team and AOSPA dev team, their roms is great.
But my problem here:
I have galaxy tab 2 10.1 - P5100 (3G + wifi). when i flash 2 rom from:
- Dhollmen
- AOSPA
or every rom on this forum,except stock rom or some build from stock, i can't connect to internet by 3G! I don't know why, I follow the intructions to flash rom, but the error still there.
My second problem is while i flash AOSPA rom, although i connected to my wifi, i can use internet but i can log in to Google play, the error said:
Can't establish a reliable connection to the sever
This could be a temporary problem or your Android device may not be provisioned for data services. If it continues, call Customer Care
I'm from VietNam and using VietNammobile mobile.
Finally, many thanks to you guys.
Click to expand...
Click to collapse
Are you "dirty flashing from one rom to another?
Do You have the correct Gapps for that Rom if needed?
Are you flashing the right version of the kernel for that rom? Modems ect

mrwetwork said:
Are you "dirty flashing from one rom to another?
Do You have the correct Gapps for that Rom if needed?
Are you flashing the right version of the kernel for that rom? Modems ect
Click to expand...
Click to collapse
i do FULL WIPE - INSTALL pa_p51XX-X.9X.zip - INSTALL GAPPS.
rom and Gapps i download from this link.
i choose right version for my device P5100.
About kernel, i don't know it use for, in the topic above, they not mention that flash another kernel.

you might want to wipe the cache and the dalvik under advanced tab.
what kind of custom recovery are you using?
Are you flashing through adb?

mrwetwork said:
you might want to wipe the cache and the dalvik under advanced tab.
what kind of custom recovery are you using?
Are you flashing through adb?
Click to expand...
Click to collapse
i did it too, wipe the cache...
i use CWM 6.0.1.2 touch
i flash through recovery mode

cuimiachien said:
i did it too, wipe the cache...
i use CWM 6.0.1.2 touch
i flash through recovery mode
Click to expand...
Click to collapse
Try to re download the file, could have been a bad file.
or go back to completely stock rooted and try a different custom rom, not all roms play well with devices.
do you know how to logcat?

mrwetwork said:
Try to re download the file, could have been a bad file.
or go back to completely stock rooted and try a different custom rom, not all roms play well with devices.
do you know how to logcat?
Click to expand...
Click to collapse
Can you show me how to logcat?

cuimiachien said:
Can you show me how to log cat?
Click to expand...
Click to collapse
I would start reading and researching XDA for the answer. XDA is a wealth of information.
START HERE http://forum.xda-developers.com/forumdisplay.php?f=1596
Search the forums for the issue your having, start with the basics.. adb and log cat is android 101. You need to understand the right way and the wrong way of flashing custom roms, recovery's, kernels before you hard brick your device. :crying: TRUST ME IVE DONE IT!! It can get ugly..
Only after 100s of hours spent reading forums and trying to understand the principals of flashing,

mrwetwork said:
I would start reading and researching XDA for the answer. XDA is a wealth of information.
START HERE http://forum.xda-developers.com/forumdisplay.php?f=1596
Search the forums for the issue your having, start with the basics.. adb and log cat is android 101. You need to understand the right way and the wrong way of flashing custom roms, recovery's, kernels before you hard brick your device. :crying: TRUST ME IVE DONE IT!! It can get ugly..
Only after 100s of hours spent reading forums and trying to understand the principals of flashing,
Click to expand...
Click to collapse
I tried all day but nothing get better! Can someone help me in this case?

[Q] Problem with device name after flashing Omni for LG Optimus G E975

Hi.
I´m pretty new to all this flashing and Custom ROM world.
I have been trying out several custom ROMs for my Optimus G E975, now I'm running OMNI taken from http://forum.xda-developers.com/showthread.php?t=2511730.
Everything is working out fine but I do want to try keeping trying out different ROMs for fun. This is where my problem starts, after I flashed OMNI i can't flash anything else. Everytime I try to flash another ROM in TWRP it says that the device name in the scrips don´t match my device name.
I can still flash OMNI again but that is the only ROM i have been able to flash again.
Is there anyone that can help me in the right direction into solving my problem with this? I would be really grateful!
/Johannes Tomt. Sweden.

Nobody?

komf said:
Nobody?
Click to expand...
Click to collapse
Any tips on other forums that would be off interest to me regarding my problem?

komf said:
Hi.
I´m pretty new to all this flashing and Custom ROM world.
I have been trying out several custom ROMs for my Optimus G E975, now I'm running OMNI taken from http://forum.xda-developers.com/showthread.php?t=2511730.
Everything is working out fine but I do want to try keeping trying out different ROMs for fun. This is where my problem starts, after I flashed OMNI i can't flash anything else. Everytime I try to flash another ROM in TWRP it says that the device name in the scrips don´t match my device name.
I can still flash OMNI again but that is the only ROM i have been able to flash again.
Is there anyone that can help me in the right direction into solving my problem with this? I would be really grateful!
/Johannes Tomt. Sweden.
Click to expand...
Click to collapse
I solved this by using adb to install the RomManager image (available at CWM's website). You can then flash whatever you like form there. The problem is that, for some reason, the TWRP that the OMNI guys are suggesting we use names the device geehrc, not e975. It is a bit annoying, but easily circumvented as long as you have access to a computer and adb.