Database Info

HELP - 3G and calls dont found

When i unistall CyanogenMod and install stock rom (Is the better for me) the phone connect to operator but when i try to calling it say marking... and not work. and the 3G doesnt connect... any solutions? my imei is 3550...
Enviado desde mi GT-I8160 usando Tapatalk 2

Which cm ver did u try?

Snow Panda said:
Which cm ver did u try?
Click to expand...
Click to collapse
A CM 10.1 unoficial alpha
Enviado desde mi GT-I8160 usando Tapatalk 2

Gonfebo said:
A CM 10.1 unoficial alpha
Enviado desde mi GT-I8160 usando Tapatalk 2
Click to expand...
Click to collapse
Reboot in recovery.
Wipe Data/Factory Reset
Wipe Cache Partition
Go in Advanced and do Wipe Dalvik Cache
Restore Stock Rom
Did you backup your stock rom using Rom manager ?

Cant Root Moto 4.4.2

Recently update the phone via ota 4.2.2 but cant root.
i tried :
Install CWM or TWRP not work :silly:
Use Root option 1 of modaco not work :silly:
Root option 2 not work :silly:
Cant start recovery for install supersu.zip
Any solution? thanks

ZealotRush said:
Recently update the phone via ota 4.2.2 but cant root.
i tried :
Install CWM or TWRP not work :silly:
Use Root option 1 of modaco not work :silly:
Root option 2 not work :silly:
Cant start recovery for install supersu.zip
Any solution? thanks
Click to expand...
Click to collapse
Same problem here :/ (flashing custom recovery)
booting to recovery displays a "No command" screen

Well, I'm rooted on 4.2.2 using the repack from Josalaito, installed using cwm then supersu
Sent from my Moto G

Flash this with CWM

ilovetorresmo said:
Flash this with CWM
Click to expand...
Click to collapse
We can't flash that on the official OTA because there isn't a working custom recovery.
Gesendet von meinem XT1032 mit Tapatalk

I'm on 4.4.2 with the repack and running SuperSu without problems
Sent from my XT1034 using xda app-developers app

flashed OTA zip and receive no command screen too.

alex1301 said:
We can't flash that on the official OTA because there isn't a working custom recovery.
Gesendet von meinem XT1032 mit Tapatalk
Click to expand...
Click to collapse
didn't read it was via ota. Try to use adb sideload

I made it (OTA US Global) NO REPACK / OFFICIAL OTA
The bootloader is the problem (you need to flash the 4.3 boot loader)
The steps:
1. Flash bootloader.img of android 4.3 (us global)
2. Boot to the custom recovery from your PC (mfastboot boot recovery.img) I tried to flash but get an error (boot failed)
3. Install superSU zip from the recovery
4. Enjoy
Thx for some user who gave me the idea
(Sorry for my bad english)
Enviado desde mi XT1032 mediante Tapatalk

oasoas014 said:
I made it (OTA US Global) NO REPACK / OFFICIAL OTA
The bootloader is the problem (you need to flash the 4.3 boot loader)
The steps:
1. Flash bootloader.img of android 4.3 (us global)
2. Boot to the custom recovery from your PC (mfastboot boot recovery.img) I tried to flash but get an error (boot failed)
3. Install superSU zip from the recovery
4. Enjoy
Thx for some user who gave me the idea
(Sorry for my bad english)
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Hablo español XD, ok thanks regards
Enviado desde mi XT1032 mediante Tapatalk

Can somebody write a comprehensive guide for root on official 4.4.2? I have never dealt with any of the stuff mentioned. My old Sammy was just CWM and go... Not bootloader or anything...
Edit: Sorry, jumped the gun. Didn't see the thread for it
Sent from my XT1034 using Tapatalk

Cooptx said:
Can somebody write a comprehensive guide for root on official 4.4.2? I have never dealt with any of the stuff mentioned. My old Sammy was just CWM and go... Not bootloader or anything...
Edit: Sorry, jumped the gun. Didn't see the thread for it
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
THERE IS A GUIDE FOR ROOTING ON A 4.4.2 MOTO G??!! WHERE?? I MUST BE BLIND because I cannot find it, only saw one for 4.3

gwiqu said:
THERE IS A GUIDE FOR ROOTING ON A 4.4.2 MOTO G??!! WHERE?? I MUST BE BLIND because I cannot find it, only saw one for 4.3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2583652
Sent from my XT1034 using Tapatalk

Cooptx said:
http://forum.xda-developers.com/showthread.php?t=2583652
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
damn, i really am blind, time to go check on my eye degree again

ZealotRush said:
Hablo español XD, ok thanks regards
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Es una regla hablar en inglés en XDA
XD
De nada
Enviado desde mi XT1032 mediante Tapatalk

Questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNSM

[CWM][DEV] ClockworkMod for Google Play Edition

Hi!
I managed to compile ClockworkMod for GPE.
The main difference is the type of userdata partition. While Moto G 'normal' version uses f2fs as userdata filesystem, Google Play Edition uses ext4 as userdata filesystem. With this recovery you be able to install files from internal memory.
[]'s

ffosilva said:
Hi!
I managed to compile ClockworkMod for GPE.
The main difference is the type of userdata partition. While Moto G 'normal' version uses f2fs as userdata filesystem, Google Play Edition uses ext4 as userdata filesystem. With this recovery you be able to install files from internal memory.
[]'s
Click to expand...
Click to collapse
adding it to rom right now and the fastboot gpe thing makes me not have service so have to flash back to 4.4.2 motto

Every thing OK with your full semiofficial firmware
Sent from my XT1032 using Tapatalk

thanks for your timely help

So, issues? Fastboot is working fine?? BTW some one have the stock recovery for the GPE ??
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
So, issues? Fastboot is working fine?? BTW some one have the stock recovery for the GPE ??
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
So @oldblue910 has dumped her stock recovery and boot and I flashed it fine via fastboot.

ffosilva said:
So @oldblue910 has dumped her stock recovery and boot and I flashed it fine via fastboot.
Click to expand...
Click to collapse
Perfect... This will work on all variants single Sim??
Or we need skip flash the modems to have signal?? Thanks
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
Perfect... This will work on all variants single Sim??
Or we need skip flash the modems to have signal?? Thanks
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
So you don't need to skip modem partition, but need to select fsg partition between fsg_intl.img and fsg_gpe.img.
fsg_gpe is a original dump and fsg_intl is a modified one (by me) to work outside usa, based on fsg_gpe. After change fsg partition remember to erase modemst1 and modemst2.

So , this will work on any device... Single Sim... ??
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
So , this will work on any device... Single Sim... ??
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Yehp. Appears to work. =) Works on my dual sim too (with sim 1 only).

ffosilva said:
Yehp. Appears to work. =) Works on my dual sim too (with sim 1 only).
Click to expand...
Click to collapse
So van i develop a tool with your files?? Please say yes!!

alonsoch said:
So van i develop a tool with your files?? Please say yes!!
Click to expand...
Click to collapse
If you give some credits, yes. =)

ffosilva said:
If you give some credits, yes. =)
Click to expand...
Click to collapse
Sure !! I will !! With big letters
Enviado desde mi XT1032 mediante Tapatalk

It is actually 6.0.4.7 not .6 as filename suggests
Sent from my XT1032 using XDA Premium 4 mobile app

Any chance to implement swipe? Dhacker posted his version of CWM6.0.4.7 with swipe just today.

What this swipe does?
Sent from my XT1032 using Tapatalk

ffosilva said:
What this swipe does?
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
The interface is the same as in classic CWM, but besides volume and power buttons, you can control it by swipes.
Here is dhacker´s version:
http://forum.xda-developers.com/showthread.php?t=2608377

OK. In a new build, maybe.
Sent from my XT1032 using Tapatalk

ffosilva said:
OK. In a new build, maybe.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Take it easy, it´s nothing vital, just a nice feature. Thanks. Also thanks for GPE images.

drfr said:
Take it easy, it´s nothing vital, just a nice feature. Thanks. Also thanks for GPE images.
Click to expand...
Click to collapse
You're welcome. =)

[Q] Install newest CWM.

Hi. Is there any other way to update CWM than do it with Odin?
I tried to install it from zip under old CWM but after reboot it is still old one - 6.0.4.4
Please help.

Get the. IMG file and use odin
Enviado desde mi XT1040 mediante Tapatalk

falle21 said:
Get the. IMG file and use odin
Enviado desde mi XT1040 mediante Tapatalk
Click to expand...
Click to collapse
I am on Ubuntu, halfway to do it but fingers cross:
https://evil****.wordpress.com/2013...and-cyanogenmod-on-samsung-galaxy-s-gt-i9000/

TWRP not install on motog 3

I can not install TWRP in motog3 error by cmd, of this error (reported target size of 268435456 bytes maximum transfer
Error: Unable to load 'TWRP-osprey-2.8.7-test1.img': No error) .Thank one of someone to help...Note. he had root and recovery TWRP .and then removed the two I try to install TWRP and I can not more.
Enviado de meu MotoG3 usando Tapatalk

What command did you use in fastboot ? Are your bootloader in unlocked ?

I have unlocked bootloader ..
Enviado de meu MotoG3 usando Tapatalk

try just booting without installing...
$ fastboot boot recovery.img
If that doesn't work, reflash the whole factory image suite

I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk

diegosd said:
I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
Are you sure you have the right rom for the model you have? There are MANY MANY different variations, and every single one gets its own factory image.
Also, if stock recovery is installing but TWRP won't, try redownloading twrp. It may have corrupted during download.

diegosd said:
I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
hp420 said:
Are you sure you have the right rom for the model you have? There are MANY MANY different variations, and every single one gets its own factory image.
Also, if stock recovery is installing but TWRP won't, try redownloading twrp. It may have corrupted during download.
Click to expand...
Click to collapse
I tried to install even though I had installed before and it did not, then downloaded again and gave the same error. I downloaded this (TWRP-osprey-2.8.7-test1.img)
Enviado de meu MotoG3 usando Tapatalk

diegosd said:
I tried to install even though I had installed before and it did not, then downloaded again and gave the same error. I downloaded this (TWRP-osprey-2.8.7-test1.img)
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
Are you sure the factory image you have is for the exact same model moto g3 you have??? like i said, there are variations between every single region and ram configuration.
Also, try another usb cable...I've had some seriously weird stuff happen with one cable, then I switch to another one and it works fine.

The first time I installed RECOVERY TWRP was first had no problem was after I took RECOVERY TWRP and instlaei the manufactures
Enviado de meu MotoG3 usando Tapatalk

diegosd said:
The first time I installed RECOVERY TWRP was first had no problem was after I took RECOVERY TWRP and instlaei the manufactures
Enviado de meu MotoG3 usando Tapatalk[/QUOTE]
Yeah, you've said that a few times already, but you still haven't answered my question
Click to expand...
Click to collapse

hp420 said:
Yeah, you've said that a few times already, but you still haven't answered my question
Click to expand...
Click to collapse
yes downloaded the version of the model it .and have tested other cables and other computers.
Enviado de meu MotoG3 usando Tapatalk