HELP - 3G and calls dont found - General Questions and Answers

When i unistall CyanogenMod and install stock rom (Is the better for me) the phone connect to operator but when i try to calling it say marking... and not work. and the 3G doesnt connect... any solutions? my imei is 3550...
Enviado desde mi GT-I8160 usando Tapatalk 2

Which cm ver did u try?

Snow Panda said:
Which cm ver did u try?
Click to expand...
Click to collapse
A CM 10.1 unoficial alpha
Enviado desde mi GT-I8160 usando Tapatalk 2

Gonfebo said:
A CM 10.1 unoficial alpha
Enviado desde mi GT-I8160 usando Tapatalk 2
Click to expand...
Click to collapse
Reboot in recovery.
Wipe Data/Factory Reset
Wipe Cache Partition
Go in Advanced and do Wipe Dalvik Cache
Restore Stock Rom
Did you backup your stock rom using Rom manager ?

Related

Help. My 10.1 tab crashes when trying to use the keyboard

A few days ago every app that tries to open the virtual keyboard ( I use Swype beta but also tried with the Samsung keyboard) just crashes so I can't type anything I've tried rebooting the tab and changing the keyboard but nothing works,I also have root.
Anything I can do to repair this problem?
Enviado desde mi R800a usando Tapatalk 2
General_Wolf said:
A few days ago every app that tries to open the virtual keyboard ( I use Swype beta but also tried with the Samsung keyboard) just crashes so I can't type anything I've tried rebooting the tab and changing the keyboard but nothing works,I also have root.
Anything I can do to repair this problem?
Enviado desde mi R800a usando Tapatalk 2
Click to expand...
Click to collapse
Have you tried clearing the keyboards data thru an app manager? You could also uninstall both keyboards and reinstall them from your sdcard. You could also try booting into recovery and doing a cache and dalvik cache wipe. And it may take a combination of all my suggestions.
Thanks I'll try
Enviado desde mi R800a usando Tapatalk 2
Thanks for the suggestions I did a factory reset as another user with the save problem told me
Enviado desde mi R800a usando Tapatalk 2

CWM and Flashtools

I have a doubt. If i had CWM Recovery with locked Bootloader, would i be able to flash a stock ROM using Flashtools? Or CWM will remain instead?
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
I have a doubt. If i had CWM Recovery with locked Bootloader, would i be able to flash a stock ROM using Flashtools? Or CWM will remain instead?
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
You can make by both methods (only if the stock rom its a flashable zip)
realthrash said:
You can make by both methods (only if the stock rom its a flashable zip)
Click to expand...
Click to collapse
Thanks. But if i want to erase CWM, can i do it by flashing a stock ROM by flashtools? I have locked BL
Enviado desde mi ST23i usando Tapatalk 2
Yes. Easy way: use pc companion > repair. If you have .ftf, use flashtool, and you will lose cwm and root.
Sent from My Awesome Paradox ST21i
I will lose CWM Although i have locked Bootloader, right?
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
I will lose CWM Although i have locked Bootloader, right?
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
CWM will be removed as the system folder will be removed too, and the boot.img replaced(if the kernel packs CWM in it)
Steam. said:
CWM will be removed as the system folder will be removed too, and the boot.img replaced(if the kernel packs CWM in it)
Click to expand...
Click to collapse
Thank you so much. I asked that because i am thinking about installing a custom ROM like Paradox but I have locked BL, so i thought i wouldn't be able to come back to complete stock for example, in case i had to ask for warranty. But my kernel doesnt pack CWM. I have stock kernel. I have to install CWM separetely. Does it matter or is it the same once you want to flash the firmware and erase CWM and go back to stock? I want to be completely sure about this, i dont want to get a huge FAIL
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
Thank you so much. I asked that because i am thinking about installing a custom ROM like Paradox but I have locked BL, so i thought i wouldn't be able to come back to complete stock for example, in case i had to ask for warranty. But my kernel doesnt pack CWM. I have stock kernel. I have to install CWM separetely. Does it matter or is it the same once you want to flash the firmware and erase CWM and go back to stock? I want to be completely sure about this, i dont want to get a huge FAIL
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
Can someone answer me please? Im interested about that.
Enviado desde mi ST23i usando Tapatalk 2
You are safe if you dont unlock bootloader. Going back to full stock? Pc companion - repair. Just root and install cwm, then install any rom that said for locked bootloader.
Sent from My Awesome Paradox ST21i
Thank you so much. Now I feel sure to install a ROM, at least, I know I can go back to stock without any problem
Enviado desde mi GT-P3110 usando Tapatalk 2

Google Gapps MIUI V7 4.4.4 or CM 5.1.1 for Xiaomi Mi4

Hi, guys.
I'm looking for a full Google gapps for MIUI v7 on my Xiaomi MI4 and a full gapps for CM12.1, not a mini gapps.
And I found OPEN gapps and TK gapps were really not fit for these two ROMs.
I have already checked it for several times, but they still didn't work.
Can anyone help me to find it?
Or did I do something wrong when I flash the gapps???
Need extended partition for full gapps
Enviado desde mi MI 3W mediante Tapatalk
MIUI Has only 640mb x 2 partitions so it doesn't have sufficient space to flash full gapps,
Solution: Extend your partitions
Google a bit u will get to know
Sent from my MI 4W using Tapatalk
satvikvg said:
MIUI Has only 640mb x 2 partitions so it doesn't have sufficient space to flash full gapps,
Solution: Extend your partitions
Google a bit u will get to know
Sent from my MI 4W using Tapatalk
Click to expand...
Click to collapse
Yes, I found that.
danielf2992 said:
Need extended partition for full gapps
Enviado desde mi MI 3W mediante Tapatalk
Click to expand...
Click to collapse
Yes, can suggest some good ideas ??
chengmingyang8888 said:
Yes, can suggest some good ideas ??
Click to expand...
Click to collapse
Make a backup
Flash ZIP for extended partition
Restore backup
Flash gapps
Enviado desde mi MI 3W mediante Tapatalk
danielf2992 said:
Make a backup
Flash ZIP for extended partition
Restore backup
Flash gapps
Enviado desde mi MI 3W mediante Tapatalk
Click to expand...
Click to collapse
Okey, many thanks!!!!
chengmingyang8888 said:
Okey, many thanks!!!!
Click to expand...
Click to collapse
Your welcome
Enviado desde mi MI 3W mediante Tapatalk

[KERNEL] n7505-vd80m-kernel. Lolllipop 5.1.1

Root, init.d support, interactive and interactive_eagle governors improved. Smooth scrolling.
Improved too performance and battery life.
Download zip file (attached).
Extract to external Sd Card.
With TWRP install as "image"
Reboot.
Recommended build.prop and Kernel Adiutor profile mods from here:
Mod edit: link removed.
Is it OK to use it with note ROM ?
Be Cool ?
Only tested in stock rom.
Enviado desde mi SM-N7505 usando Tapatalk 2
OK, I'll test it and let you know
Be Cool ?
Thanks a lot, mate.
Enviado desde mi SM-N7505 usando Tapatalk 2
It's perfectly working so far ?, regarding root users, they will lose root after flashing it, so they will have to root again.
Be Cool ?
Awesome work man!
It's really good one. Note ROM + Your kernel = perfection. No lock screen lag or any other issues at all. Smooth experience and good battery life. Way to go man ?
Be Cool ?
Thanks to both.
Enviado desde mi SM-N7505 usando Tapatalk 2
Can I install this on a stock 5.1.1 not rooted?
m80dv said:
Thanks to both.
Enviado desde mi SM-N7505 usando Tapatalk 2
Click to expand...
Click to collapse
Which governor do you use ?
Be Cool ?
Defaults. Interactive_eagle for BIG cpu and interactive for Little CPU.
Enviado desde mi SM-N7505 usando Tapatalk 2
m80dv said:
Defaults. Interactive_eagle for BIG cpu and interactive for Little CPU.
Enviado desde mi SM-N7505 usando Tapatalk 2
Click to expand...
Click to collapse
Oh, same here [emoji106]
Be Cool ?
zekir said:
Can I install this on a stock 5.1.1 not rooted?
Click to expand...
Click to collapse
No, you can't.
Ne mozes da go instaliras na nerutiran telefon Zekir. Ako znaes kako rutiraj go, i stavi go NoteRom V3 pa posle ovoj kernel i telefonot raboti mnogu brzo i bez nikakvi greski. A i romot e mnogu jak, kako 6.0.1 android na Note 5 e.
Se najdobro.
Great job bro, kerenel its perfect, no screen off lag.
Ty!
m80dv said:
Root, init.d support, interactive and interactive_eagle governors improved. Smooth scrolling.
Improved too performance and battery life.
Download zip file (attached).
Extract to external Sd Card.
With TWRP install as "image"
Reboot.
Recommended build.prop and Kernel Adiutor profile mods from here:
http://forum.xda-developers.com/note-3-neo/development/mod-n7505-root-stock-users-smooth-t3354605
Click to expand...
Click to collapse
Now everything is complete!!! Thank you for this kernel, 2 days working and no lag at all. Awesome work dude. Thanks.
gnex987 said:
hi, im on note rom v3 and i flash your kernel. this is what i ve done:
-flash the boot.img as boot in twrp (in correct?)
-rooted againt with amit anand guide in his rom thread
-no i ve to use the recomanded build prop in the first page ???
is all correct ?
Click to expand...
Click to collapse
Correct. Recommended too kernel Adiutor profile.
Thanks all for testing.
Enviado desde mi SM-N7505 usando Tapatalk 2
gnex987 said:
Thx. I ve put the profile json and set every thing in kernel auditor to start on bot after put the json file. But i ve a question, do i ve to do something with the init.d section of kernel auditor ?
Click to expand...
Click to collapse
Nothing.
Enviado desde mi SM-N7505 usando Tapatalk 2
On stock rom your kernel works flawlessly, but on Note Rom V3 i get System UI force close. I'll reflash rom and your kernel again, and see if build.prop makes a problem(more likely) or your kernel. Thanks again
I only tested in stock rom. May be problem are in build.prop. You can begin for add the most important lines for best multi tasking and stop killer processing.
See capture and thanks for testing.
Enviado desde mi SM-N7505 usando Tapatalk 2

"Settings stopped" when entering Display

Recently I updated to OOS 5.1.9 and flashed Magisk and TWRP afterwards. Now, when I try to enter the display settings, settings force close and reopens again. It only happen with display. Tried already to reboot, uninstall Magisk but nothing helped.
Any help?
Me too... Some ideas?
I think that my problem was flash kernel with avenger theme previously installed.
Enviado desde mi ONEPLUS A6000 mediante Tapatalk
gargamelxda said:
Me too... Some ideas?
I think that my problem was flash kernel with avenger theme previously installed.
Enviado desde mi ONEPLUS A6000 mediante Tapatalk
Click to expand...
Click to collapse
That was the problem. You have to disable themes first.
mikex8593 said:
That was the problem. You have to disable themes first.
Click to expand...
Click to collapse
Ok thanks....
Can I flash rom zip with wipe system only? I think that solve problem.
Enviado desde mi ONEPLUS A6000 mediante Tapatalk
gargamelxda said:
Ok thanks....
Can I flash rom zip with wipe system only? I think that solve problem.
Enviado desde mi ONEPLUS A6000 mediante Tapatalk
Click to expand...
Click to collapse
I think it's still in the data partition with the theme, but I'm not sure. You can try to wipe system and flash the full oos zip. You could also restore previous working version and just disable theme, then flash version you want without losing data.
Problem solved.
Install flash kernel in twrp, then flash enable avengertheme. Then dont fc in settings display. After This you can enable or disable theme or you can disable theme, install disableavengertheme in twrp and problem solved forever but without possibility to enable avenger theme.
Enviado desde mi ONEPLUS A6000 mediante Tapatalk

Categories

Resources