I have a doubt. If i had CWM Recovery with locked Bootloader, would i be able to flash a stock ROM using Flashtools? Or CWM will remain instead?
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
I have a doubt. If i had CWM Recovery with locked Bootloader, would i be able to flash a stock ROM using Flashtools? Or CWM will remain instead?
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
You can make by both methods (only if the stock rom its a flashable zip)
realthrash said:
You can make by both methods (only if the stock rom its a flashable zip)
Click to expand...
Click to collapse
Thanks. But if i want to erase CWM, can i do it by flashing a stock ROM by flashtools? I have locked BL
Enviado desde mi ST23i usando Tapatalk 2
Yes. Easy way: use pc companion > repair. If you have .ftf, use flashtool, and you will lose cwm and root.
Sent from My Awesome Paradox ST21i
I will lose CWM Although i have locked Bootloader, right?
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
I will lose CWM Although i have locked Bootloader, right?
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
CWM will be removed as the system folder will be removed too, and the boot.img replaced(if the kernel packs CWM in it)
Steam. said:
CWM will be removed as the system folder will be removed too, and the boot.img replaced(if the kernel packs CWM in it)
Click to expand...
Click to collapse
Thank you so much. I asked that because i am thinking about installing a custom ROM like Paradox but I have locked BL, so i thought i wouldn't be able to come back to complete stock for example, in case i had to ask for warranty. But my kernel doesnt pack CWM. I have stock kernel. I have to install CWM separetely. Does it matter or is it the same once you want to flash the firmware and erase CWM and go back to stock? I want to be completely sure about this, i dont want to get a huge FAIL
Enviado desde mi ST23i usando Tapatalk 2
miguelSony said:
Thank you so much. I asked that because i am thinking about installing a custom ROM like Paradox but I have locked BL, so i thought i wouldn't be able to come back to complete stock for example, in case i had to ask for warranty. But my kernel doesnt pack CWM. I have stock kernel. I have to install CWM separetely. Does it matter or is it the same once you want to flash the firmware and erase CWM and go back to stock? I want to be completely sure about this, i dont want to get a huge FAIL
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
Can someone answer me please? Im interested about that.
Enviado desde mi ST23i usando Tapatalk 2
You are safe if you dont unlock bootloader. Going back to full stock? Pc companion - repair. Just root and install cwm, then install any rom that said for locked bootloader.
Sent from My Awesome Paradox ST21i
Thank you so much. Now I feel sure to install a ROM, at least, I know I can go back to stock without any problem
Enviado desde mi GT-P3110 usando Tapatalk 2
Related
Recently update the phone via ota 4.2.2 but cant root.
i tried :
Install CWM or TWRP not work :silly:
Use Root option 1 of modaco not work :silly:
Root option 2 not work :silly:
Cant start recovery for install supersu.zip
Any solution? thanks
ZealotRush said:
Recently update the phone via ota 4.2.2 but cant root.
i tried :
Install CWM or TWRP not work :silly:
Use Root option 1 of modaco not work :silly:
Root option 2 not work :silly:
Cant start recovery for install supersu.zip
Any solution? thanks
Click to expand...
Click to collapse
Same problem here :/ (flashing custom recovery)
booting to recovery displays a "No command" screen
Well, I'm rooted on 4.2.2 using the repack from Josalaito, installed using cwm then supersu
Sent from my Moto G
Flash this with CWM
ilovetorresmo said:
Flash this with CWM
Click to expand...
Click to collapse
We can't flash that on the official OTA because there isn't a working custom recovery.
Gesendet von meinem XT1032 mit Tapatalk
I'm on 4.4.2 with the repack and running SuperSu without problems
Sent from my XT1034 using xda app-developers app
flashed OTA zip and receive no command screen too.
alex1301 said:
We can't flash that on the official OTA because there isn't a working custom recovery.
Gesendet von meinem XT1032 mit Tapatalk
Click to expand...
Click to collapse
didn't read it was via ota. Try to use adb sideload
I made it (OTA US Global) NO REPACK / OFFICIAL OTA
The bootloader is the problem (you need to flash the 4.3 boot loader)
The steps:
1. Flash bootloader.img of android 4.3 (us global)
2. Boot to the custom recovery from your PC (mfastboot boot recovery.img) I tried to flash but get an error (boot failed)
3. Install superSU zip from the recovery
4. Enjoy
Thx for some user who gave me the idea
(Sorry for my bad english)
Enviado desde mi XT1032 mediante Tapatalk
oasoas014 said:
I made it (OTA US Global) NO REPACK / OFFICIAL OTA
The bootloader is the problem (you need to flash the 4.3 boot loader)
The steps:
1. Flash bootloader.img of android 4.3 (us global)
2. Boot to the custom recovery from your PC (mfastboot boot recovery.img) I tried to flash but get an error (boot failed)
3. Install superSU zip from the recovery
4. Enjoy
Thx for some user who gave me the idea
(Sorry for my bad english)
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Hablo español XD, ok thanks regards
Enviado desde mi XT1032 mediante Tapatalk
Can somebody write a comprehensive guide for root on official 4.4.2? I have never dealt with any of the stuff mentioned. My old Sammy was just CWM and go... Not bootloader or anything...
Edit: Sorry, jumped the gun. Didn't see the thread for it
Sent from my XT1034 using Tapatalk
Cooptx said:
Can somebody write a comprehensive guide for root on official 4.4.2? I have never dealt with any of the stuff mentioned. My old Sammy was just CWM and go... Not bootloader or anything...
Edit: Sorry, jumped the gun. Didn't see the thread for it
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
THERE IS A GUIDE FOR ROOTING ON A 4.4.2 MOTO G??!! WHERE?? I MUST BE BLIND because I cannot find it, only saw one for 4.3
gwiqu said:
THERE IS A GUIDE FOR ROOTING ON A 4.4.2 MOTO G??!! WHERE?? I MUST BE BLIND because I cannot find it, only saw one for 4.3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2583652
Sent from my XT1034 using Tapatalk
Cooptx said:
http://forum.xda-developers.com/showthread.php?t=2583652
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
damn, i really am blind, time to go check on my eye degree again
ZealotRush said:
Hablo español XD, ok thanks regards
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Es una regla hablar en inglés en XDA
XD
De nada
Enviado desde mi XT1032 mediante Tapatalk
Questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNSM
Hi. Is there any other way to update CWM than do it with Odin?
I tried to install it from zip under old CWM but after reboot it is still old one - 6.0.4.4
Please help.
Get the. IMG file and use odin
Enviado desde mi XT1040 mediante Tapatalk
falle21 said:
Get the. IMG file and use odin
Enviado desde mi XT1040 mediante Tapatalk
Click to expand...
Click to collapse
I am on Ubuntu, halfway to do it but fingers cross:
https://evil****.wordpress.com/2013...and-cyanogenmod-on-samsung-galaxy-s-gt-i9000/
I can not install TWRP in motog3 error by cmd, of this error (reported target size of 268435456 bytes maximum transfer
Error: Unable to load 'TWRP-osprey-2.8.7-test1.img': No error) .Thank one of someone to help...Note. he had root and recovery TWRP .and then removed the two I try to install TWRP and I can not more.
Enviado de meu MotoG3 usando Tapatalk
What command did you use in fastboot ? Are your bootloader in unlocked ?
I have unlocked bootloader ..
Enviado de meu MotoG3 usando Tapatalk
try just booting without installing...
$ fastboot boot recovery.img
If that doesn't work, reflash the whole factory image suite
I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk
diegosd said:
I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
Are you sure you have the right rom for the model you have? There are MANY MANY different variations, and every single one gets its own factory image.
Also, if stock recovery is installing but TWRP won't, try redownloading twrp. It may have corrupted during download.
diegosd said:
I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
hp420 said:
Are you sure you have the right rom for the model you have? There are MANY MANY different variations, and every single one gets its own factory image.
Also, if stock recovery is installing but TWRP won't, try redownloading twrp. It may have corrupted during download.
Click to expand...
Click to collapse
I tried to install even though I had installed before and it did not, then downloaded again and gave the same error. I downloaded this (TWRP-osprey-2.8.7-test1.img)
Enviado de meu MotoG3 usando Tapatalk
diegosd said:
I tried to install even though I had installed before and it did not, then downloaded again and gave the same error. I downloaded this (TWRP-osprey-2.8.7-test1.img)
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
Are you sure the factory image you have is for the exact same model moto g3 you have??? like i said, there are variations between every single region and ram configuration.
Also, try another usb cable...I've had some seriously weird stuff happen with one cable, then I switch to another one and it works fine.
The first time I installed RECOVERY TWRP was first had no problem was after I took RECOVERY TWRP and instlaei the manufactures
Enviado de meu MotoG3 usando Tapatalk
diegosd said:
The first time I installed RECOVERY TWRP was first had no problem was after I took RECOVERY TWRP and instlaei the manufactures
Enviado de meu MotoG3 usando Tapatalk[/QUOTE]
Yeah, you've said that a few times already, but you still haven't answered my question
Click to expand...
Click to collapse
hp420 said:
Yeah, you've said that a few times already, but you still haven't answered my question
Click to expand...
Click to collapse
yes downloaded the version of the model it .and have tested other cables and other computers.
Enviado de meu MotoG3 usando Tapatalk
Is no way to create a rom and flash it by the lg flash tool?, like they do with stock but with custom firmware
Enviado desde mi LG-H950 mediante Tapatalk
zitrussCEx said:
Is no way to create a rom and flash it by the lg flash tool?, like they do with stock but with custom firmware
Enviado desde mi LG-H950 mediante Tapatalk
Click to expand...
Click to collapse
not at the moment....am on LG A#$$ at the moment to get them to release it....hopefully they hear and understand me...because am annoyed at this point....g flex 2 is too powerful and we need more devs...i have builded a custom , debloated rooted ROM ready..but am not releasing until i get my phone back from LG repair,,,
Kingroot not work on last firmware 39.0.A.3.30... (And I have not tried if in the older works)
This official firmware have much apps installed system-mode...
any solutions? thanks
And doesn't works on priors firmwares.
No root with locked bootloader so far.
Enviado desde mi F8331 mediante Tapatalk
caqo71 said:
And doesn't works on priors firmwares.
No root with locked bootloader so far.
Enviado desde mi F8331 mediante Tapatalk
Click to expand...
Click to collapse
unlock bootloader lose drm-keys and warranty?
Yes, but androplus kernel restores camera and system functions.
Enviado desde mi F8331 mediante Tapatalk
KrAzYtHeBoY said:
unlock bootloader lose drm-keys and warranty?
Click to expand...
Click to collapse
Hi Krazy, I'm waiting for the same too.
anything yet ?