Database Info

CWM and Flashtools

I have a doubt. If i had CWM Recovery with locked Bootloader, would i be able to flash a stock ROM using Flashtools? Or CWM will remain instead?
Enviado desde mi ST23i usando Tapatalk 2

miguelSony said:
I have a doubt. If i had CWM Recovery with locked Bootloader, would i be able to flash a stock ROM using Flashtools? Or CWM will remain instead?
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
You can make by both methods (only if the stock rom its a flashable zip)

realthrash said:
You can make by both methods (only if the stock rom its a flashable zip)
Click to expand...
Click to collapse
Thanks. But if i want to erase CWM, can i do it by flashing a stock ROM by flashtools? I have locked BL
Enviado desde mi ST23i usando Tapatalk 2

Yes. Easy way: use pc companion > repair. If you have .ftf, use flashtool, and you will lose cwm and root.
Sent from My Awesome Paradox ST21i

I will lose CWM Although i have locked Bootloader, right?
Enviado desde mi ST23i usando Tapatalk 2

miguelSony said:
I will lose CWM Although i have locked Bootloader, right?
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
CWM will be removed as the system folder will be removed too, and the boot.img replaced(if the kernel packs CWM in it)

Steam. said:
CWM will be removed as the system folder will be removed too, and the boot.img replaced(if the kernel packs CWM in it)
Click to expand...
Click to collapse
Thank you so much. I asked that because i am thinking about installing a custom ROM like Paradox but I have locked BL, so i thought i wouldn't be able to come back to complete stock for example, in case i had to ask for warranty. But my kernel doesnt pack CWM. I have stock kernel. I have to install CWM separetely. Does it matter or is it the same once you want to flash the firmware and erase CWM and go back to stock? I want to be completely sure about this, i dont want to get a huge FAIL
Enviado desde mi ST23i usando Tapatalk 2

miguelSony said:
Thank you so much. I asked that because i am thinking about installing a custom ROM like Paradox but I have locked BL, so i thought i wouldn't be able to come back to complete stock for example, in case i had to ask for warranty. But my kernel doesnt pack CWM. I have stock kernel. I have to install CWM separetely. Does it matter or is it the same once you want to flash the firmware and erase CWM and go back to stock? I want to be completely sure about this, i dont want to get a huge FAIL
Enviado desde mi ST23i usando Tapatalk 2
Click to expand...
Click to collapse
Can someone answer me please? Im interested about that.
Enviado desde mi ST23i usando Tapatalk 2

You are safe if you dont unlock bootloader. Going back to full stock? Pc companion - repair. Just root and install cwm, then install any rom that said for locked bootloader.
Sent from My Awesome Paradox ST21i

Thank you so much. Now I feel sure to install a ROM, at least, I know I can go back to stock without any problem
Enviado desde mi GT-P3110 usando Tapatalk 2

[CWM][DEV] ClockworkMod for Google Play Edition

Hi!
I managed to compile ClockworkMod for GPE.
The main difference is the type of userdata partition. While Moto G 'normal' version uses f2fs as userdata filesystem, Google Play Edition uses ext4 as userdata filesystem. With this recovery you be able to install files from internal memory.
[]'s

ffosilva said:
Hi!
I managed to compile ClockworkMod for GPE.
The main difference is the type of userdata partition. While Moto G 'normal' version uses f2fs as userdata filesystem, Google Play Edition uses ext4 as userdata filesystem. With this recovery you be able to install files from internal memory.
[]'s
Click to expand...
Click to collapse
adding it to rom right now and the fastboot gpe thing makes me not have service so have to flash back to 4.4.2 motto

Every thing OK with your full semiofficial firmware
Sent from my XT1032 using Tapatalk

thanks for your timely help

So, issues? Fastboot is working fine?? BTW some one have the stock recovery for the GPE ??
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
So, issues? Fastboot is working fine?? BTW some one have the stock recovery for the GPE ??
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
So @oldblue910 has dumped her stock recovery and boot and I flashed it fine via fastboot.

ffosilva said:
So @oldblue910 has dumped her stock recovery and boot and I flashed it fine via fastboot.
Click to expand...
Click to collapse
Perfect... This will work on all variants single Sim??
Or we need skip flash the modems to have signal?? Thanks
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
Perfect... This will work on all variants single Sim??
Or we need skip flash the modems to have signal?? Thanks
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
So you don't need to skip modem partition, but need to select fsg partition between fsg_intl.img and fsg_gpe.img.
fsg_gpe is a original dump and fsg_intl is a modified one (by me) to work outside usa, based on fsg_gpe. After change fsg partition remember to erase modemst1 and modemst2.

So , this will work on any device... Single Sim... ??
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
So , this will work on any device... Single Sim... ??
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Yehp. Appears to work. =) Works on my dual sim too (with sim 1 only).

ffosilva said:
Yehp. Appears to work. =) Works on my dual sim too (with sim 1 only).
Click to expand...
Click to collapse
So van i develop a tool with your files?? Please say yes!!

alonsoch said:
So van i develop a tool with your files?? Please say yes!!
Click to expand...
Click to collapse
If you give some credits, yes. =)

ffosilva said:
If you give some credits, yes. =)
Click to expand...
Click to collapse
Sure !! I will !! With big letters
Enviado desde mi XT1032 mediante Tapatalk

It is actually 6.0.4.7 not .6 as filename suggests
Sent from my XT1032 using XDA Premium 4 mobile app

Any chance to implement swipe? Dhacker posted his version of CWM6.0.4.7 with swipe just today.

What this swipe does?
Sent from my XT1032 using Tapatalk

ffosilva said:
What this swipe does?
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
The interface is the same as in classic CWM, but besides volume and power buttons, you can control it by swipes.
Here is dhacker´s version:
http://forum.xda-developers.com/showthread.php?t=2608377

OK. In a new build, maybe.
Sent from my XT1032 using Tapatalk

ffosilva said:
OK. In a new build, maybe.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Take it easy, it´s nothing vital, just a nice feature. Thanks. Also thanks for GPE images.

drfr said:
Take it easy, it´s nothing vital, just a nice feature. Thanks. Also thanks for GPE images.
Click to expand...
Click to collapse
You're welcome. =)

[Q] Stock Recovery IMG needed

Hi all,
I am new to this forum. I own a Xiaomi Mi4i and I have flashed TWRP in it. I have following questions:-
1. Will I get OTA? If not, can I download the OTA zip and flash it via TWRP?
2. Can anyone provide a link where I can download stock recovery for Mi4i?
Any help would be appericiated.
Thanks and Regards.

Just flash an miui rom via fastboot you will get all what u need
Sent from my Mi 4i using Tapatalk

ruffain said:
Just flash an miui rom via fastboot you will get all what u need
Sent from my Mi 4i using Tapatalk
Click to expand...
Click to collapse
Will that lead to data loss?

iamelusive said:
Will that lead to data loss?
Click to expand...
Click to collapse
Ofc just take a backup before
Sent from my Mi 4i using Tapatalk

ruffain said:
Ofc just take a backup before
Sent from my Mi 4i using Tapatalk
Click to expand...
Click to collapse
Thanks for your replies. But I got stock recovery image file.
Currently Updating to MIUI 6.6.1.0 (Progress 79%)

iamelusive said:
Thanks for your replies. But I got stock recovery image file.
Currently Updating to MIUI 6.6.1.0 (Progress 79%)
Click to expand...
Click to collapse
Any chance you could share it?
Sent from my Mi 4i using Tapatalk

ruffain said:
Any chance you could share it?
Sent from my Mi 4i using Tapatalk
Click to expand...
Click to collapse
I am currently out of station. Will upload by tomorrow.

Hi
Could you share the stock recovery for Mi 4i?
And how are you updating to 6.6.1? via fastboot or just by unrooting and installing Stock recovery?

stock recovery
hey guys,
here is the link for the stock recovery
http://d-h.st/5Sew
It can be flashed through flashify
Enjoy

ruffain said:
Any chance you could share it?
Sent from my Mi 4i using Tapatalk
Click to expand...
Click to collapse
Here you go!
https://drive.google.com/file/d/0Bz4j1AjMqI3_T0dVTlE5eTBOckk/view?usp=sharing

TWRP not install on motog 3

I can not install TWRP in motog3 error by cmd, of this error (reported target size of 268435456 bytes maximum transfer
Error: Unable to load 'TWRP-osprey-2.8.7-test1.img': No error) .Thank one of someone to help...Note. he had root and recovery TWRP .and then removed the two I try to install TWRP and I can not more.
Enviado de meu MotoG3 usando Tapatalk

What command did you use in fastboot ? Are your bootloader in unlocked ?

I have unlocked bootloader ..
Enviado de meu MotoG3 usando Tapatalk

try just booting without installing...
$ fastboot boot recovery.img
If that doesn't work, reflash the whole factory image suite

I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk

diegosd said:
I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
Are you sure you have the right rom for the model you have? There are MANY MANY different variations, and every single one gets its own factory image.
Also, if stock recovery is installing but TWRP won't, try redownloading twrp. It may have corrupted during download.

diegosd said:
I have just tried starting the recovery and the same mistake. And already I passed the original rom again and continues this error.
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
hp420 said:
Are you sure you have the right rom for the model you have? There are MANY MANY different variations, and every single one gets its own factory image.
Also, if stock recovery is installing but TWRP won't, try redownloading twrp. It may have corrupted during download.
Click to expand...
Click to collapse
I tried to install even though I had installed before and it did not, then downloaded again and gave the same error. I downloaded this (TWRP-osprey-2.8.7-test1.img)
Enviado de meu MotoG3 usando Tapatalk

diegosd said:
I tried to install even though I had installed before and it did not, then downloaded again and gave the same error. I downloaded this (TWRP-osprey-2.8.7-test1.img)
Enviado de meu MotoG3 usando Tapatalk
Click to expand...
Click to collapse
Are you sure the factory image you have is for the exact same model moto g3 you have??? like i said, there are variations between every single region and ram configuration.
Also, try another usb cable...I've had some seriously weird stuff happen with one cable, then I switch to another one and it works fine.

The first time I installed RECOVERY TWRP was first had no problem was after I took RECOVERY TWRP and instlaei the manufactures
Enviado de meu MotoG3 usando Tapatalk

diegosd said:
The first time I installed RECOVERY TWRP was first had no problem was after I took RECOVERY TWRP and instlaei the manufactures
Enviado de meu MotoG3 usando Tapatalk[/QUOTE]
Yeah, you've said that a few times already, but you still haven't answered my question
Click to expand...
Click to collapse

hp420 said:
Yeah, you've said that a few times already, but you still haven't answered my question
Click to expand...
Click to collapse
yes downloaded the version of the model it .and have tested other cables and other computers.
Enviado de meu MotoG3 usando Tapatalk

MI 4C bootloop after flash su binary

Whenever I'm going to flash the binary su via TWRP most updated I give wipe cache and start my cell normally it is locked in the boot screen logo and it will not come out of no way, no way I do in my root MI 4C? I'm on the latest version of the rom stable and wanted to know if you have how to flash the binary su without getting in bootloop time the flash all OK gives no error in history there's TWRP but when I start the phone it is always on the screen please help to boot
first of all I'm sorry for my English because I am using Google translator

Reflash full rom zip, wipe caches, then flash superSu Zip, then reboot. Wait at least 10-15 minutes.

as well reflash rom? I'm good in the original version of miui friend how I can do this procedure? you mean reinstall stock and reflash the supersu?

my goal is to root in the stock rom original miui

The last working superSu version is 2.46. Leter versions will cause in bootloop.

In MIUI 8 oficial you have to disable dm-verifiy for install SuperSu, Xposed...
Enviado desde mi Mi-4c mediante Tapatalk

It is to do root in miui v7? and V8 is in beta and is full of bugs

panhansx said:
The last working superSu version is 2.46. Leter versions will cause in bootloop.
Click to expand...
Click to collapse
man i flashed su binary 2.46 but my device stuck in bootloop again

isaqi_veras said:
man i flashed su binary 2.46 but my device stuck in bootloop again
Click to expand...
Click to collapse
Disable DM-Verify...
Enviado desde mi Mi-4c mediante Tapatalk

Did you flashed it over ypu bricked rom? Then it doesnt work.
Gesendet von meinem Mi-4c mit Tapatalk

How do you do that? can you help me? I did not know that DM verify?

panhansx said:
Did you flashed it over ypu bricked rom? Then it doesnt work.
Gesendet von meinem Mi-4c mit Tapatalk
Click to expand...
Click to collapse
I was in the original rom miui V7 and gave flash torque appeared all OK there in the TWRP history but in time to start it only gets in the logo screen

I just did this root procedure as I had already done with any other cell using TWRP only if mine is entering bootloop

First do a clean flash of your miui rom and boot it up. (dalvik, cache and data wipe)
After that go back to recovery and flash superSu 2.46 without any wipe.
If it's fine, rollback your miui backup.

I had seen a topic there in the miui forum and managed to disable DM-Verify the problem was that it is a software that blocks changes in the system and partitions even if the bootloader was unlocked but thanks for the help I could ever do root in my MI 4C
Enviado de meu Mi-4c usando Tapatalk

isaqi_veras said:
I had seen a topic there in the miui forum and managed to disable DM-Verify the problem was that it is a software that blocks changes in the system and partitions even if the bootloader was unlocked but thanks for the help I could ever do root in my MI 4C
Enviado de meu Mi-4c usando Tapatalk
Click to expand...
Click to collapse
did it work because I'm having the same problem with My mi4c

yes it works you give flash in the script via TWRP here is the link via Google drive and only gives flash immediately after you install the super su and reboot now and taraaaaaammmm your phone is with root and you have to do this every update or stock that you are installing
Disable DM-Verify link: https://drive.google.com/file/d/0B-ERl35VPrpPOEFadjNBVDNfWEE/view?usp=drivesdk
Enviado de meu Mi-4c usando Tapatalk

sorry my English because I do not speak fluent or have sense I am using Google translator if he could not understand I can try to use other words
Enviado de meu Mi-4c usando Tapatalk