[CWM][DEV] ClockworkMod for Google Play Edition - Moto G Android Development

Hi!
I managed to compile ClockworkMod for GPE.
The main difference is the type of userdata partition. While Moto G 'normal' version uses f2fs as userdata filesystem, Google Play Edition uses ext4 as userdata filesystem. With this recovery you be able to install files from internal memory.
[]'s

ffosilva said:
Hi!
I managed to compile ClockworkMod for GPE.
The main difference is the type of userdata partition. While Moto G 'normal' version uses f2fs as userdata filesystem, Google Play Edition uses ext4 as userdata filesystem. With this recovery you be able to install files from internal memory.
[]'s
Click to expand...
Click to collapse
adding it to rom right now and the fastboot gpe thing makes me not have service so have to flash back to 4.4.2 motto

Every thing OK with your full semiofficial firmware
Sent from my XT1032 using Tapatalk

thanks for your timely help

So, issues? Fastboot is working fine?? BTW some one have the stock recovery for the GPE ??
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
So, issues? Fastboot is working fine?? BTW some one have the stock recovery for the GPE ??
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
So @oldblue910 has dumped her stock recovery and boot and I flashed it fine via fastboot.

ffosilva said:
So @oldblue910 has dumped her stock recovery and boot and I flashed it fine via fastboot.
Click to expand...
Click to collapse
Perfect... This will work on all variants single Sim??
Or we need skip flash the modems to have signal?? Thanks
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
Perfect... This will work on all variants single Sim??
Or we need skip flash the modems to have signal?? Thanks
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
So you don't need to skip modem partition, but need to select fsg partition between fsg_intl.img and fsg_gpe.img.
fsg_gpe is a original dump and fsg_intl is a modified one (by me) to work outside usa, based on fsg_gpe. After change fsg partition remember to erase modemst1 and modemst2.

So , this will work on any device... Single Sim... ??
Enviado desde mi XT1032 mediante Tapatalk

alonsoch said:
So , this will work on any device... Single Sim... ??
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Yehp. Appears to work. =) Works on my dual sim too (with sim 1 only).

ffosilva said:
Yehp. Appears to work. =) Works on my dual sim too (with sim 1 only).
Click to expand...
Click to collapse
So van i develop a tool with your files?? Please say yes!!

alonsoch said:
So van i develop a tool with your files?? Please say yes!!
Click to expand...
Click to collapse
If you give some credits, yes. =)

ffosilva said:
If you give some credits, yes. =)
Click to expand...
Click to collapse
Sure !! I will !! With big letters
Enviado desde mi XT1032 mediante Tapatalk

It is actually 6.0.4.7 not .6 as filename suggests
Sent from my XT1032 using XDA Premium 4 mobile app

Any chance to implement swipe? Dhacker posted his version of CWM6.0.4.7 with swipe just today.

What this swipe does?
Sent from my XT1032 using Tapatalk

ffosilva said:
What this swipe does?
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
The interface is the same as in classic CWM, but besides volume and power buttons, you can control it by swipes.
Here is dhacker´s version:
http://forum.xda-developers.com/showthread.php?t=2608377

OK. In a new build, maybe.
Sent from my XT1032 using Tapatalk

ffosilva said:
OK. In a new build, maybe.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Take it easy, it´s nothing vital, just a nice feature. Thanks. Also thanks for GPE images.

drfr said:
Take it easy, it´s nothing vital, just a nice feature. Thanks. Also thanks for GPE images.
Click to expand...
Click to collapse
You're welcome. =)

Related

Cant Root Moto 4.4.2

Recently update the phone via ota 4.2.2 but cant root.
i tried :
Install CWM or TWRP not work :silly:
Use Root option 1 of modaco not work :silly:
Root option 2 not work :silly:
Cant start recovery for install supersu.zip
Any solution? thanks
ZealotRush said:
Recently update the phone via ota 4.2.2 but cant root.
i tried :
Install CWM or TWRP not work :silly:
Use Root option 1 of modaco not work :silly:
Root option 2 not work :silly:
Cant start recovery for install supersu.zip
Any solution? thanks
Click to expand...
Click to collapse
Same problem here :/ (flashing custom recovery)
booting to recovery displays a "No command" screen
Well, I'm rooted on 4.2.2 using the repack from Josalaito, installed using cwm then supersu
Sent from my Moto G
Flash this with CWM
ilovetorresmo said:
Flash this with CWM
Click to expand...
Click to collapse
We can't flash that on the official OTA because there isn't a working custom recovery.
Gesendet von meinem XT1032 mit Tapatalk
I'm on 4.4.2 with the repack and running SuperSu without problems
Sent from my XT1034 using xda app-developers app
flashed OTA zip and receive no command screen too.
alex1301 said:
We can't flash that on the official OTA because there isn't a working custom recovery.
Gesendet von meinem XT1032 mit Tapatalk
Click to expand...
Click to collapse
didn't read it was via ota. Try to use adb sideload
I made it (OTA US Global) NO REPACK / OFFICIAL OTA
The bootloader is the problem (you need to flash the 4.3 boot loader)
The steps:
1. Flash bootloader.img of android 4.3 (us global)
2. Boot to the custom recovery from your PC (mfastboot boot recovery.img) I tried to flash but get an error (boot failed)
3. Install superSU zip from the recovery
4. Enjoy
Thx for some user who gave me the idea
(Sorry for my bad english)
Enviado desde mi XT1032 mediante Tapatalk
oasoas014 said:
I made it (OTA US Global) NO REPACK / OFFICIAL OTA
The bootloader is the problem (you need to flash the 4.3 boot loader)
The steps:
1. Flash bootloader.img of android 4.3 (us global)
2. Boot to the custom recovery from your PC (mfastboot boot recovery.img) I tried to flash but get an error (boot failed)
3. Install superSU zip from the recovery
4. Enjoy
Thx for some user who gave me the idea
(Sorry for my bad english)
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Hablo español XD, ok thanks regards
Enviado desde mi XT1032 mediante Tapatalk
Can somebody write a comprehensive guide for root on official 4.4.2? I have never dealt with any of the stuff mentioned. My old Sammy was just CWM and go... Not bootloader or anything...
Edit: Sorry, jumped the gun. Didn't see the thread for it
Sent from my XT1034 using Tapatalk
Cooptx said:
Can somebody write a comprehensive guide for root on official 4.4.2? I have never dealt with any of the stuff mentioned. My old Sammy was just CWM and go... Not bootloader or anything...
Edit: Sorry, jumped the gun. Didn't see the thread for it
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
THERE IS A GUIDE FOR ROOTING ON A 4.4.2 MOTO G??!! WHERE?? I MUST BE BLIND because I cannot find it, only saw one for 4.3
gwiqu said:
THERE IS A GUIDE FOR ROOTING ON A 4.4.2 MOTO G??!! WHERE?? I MUST BE BLIND because I cannot find it, only saw one for 4.3
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2583652
Sent from my XT1034 using Tapatalk
Cooptx said:
http://forum.xda-developers.com/showthread.php?t=2583652
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
damn, i really am blind, time to go check on my eye degree again
ZealotRush said:
Hablo español XD, ok thanks regards
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Es una regla hablar en inglés en XDA
XD
De nada
Enviado desde mi XT1032 mediante Tapatalk
Questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNSM

[PATCHROM] MIUI V5 Kitkat for xt1032 builded from MIUI Source

Hi, i was working in a Patchrom for xt1032(Before, i did patchroms for G300, Y300 and u8650), to bring to the device a fully functional and bootable miui rom, this build is compiled from source and should be completely functional.
The rom has not been tested yet because i need some betatesters, i'm uploading it and i will share the link when it's ready.
LINK: LINK
IMPORTANT: THIS IS NOT A PORT, IS A BUILD BASED ON MIUI SOURCES(http://github.com/micode)
Ready for it.
Sent from my XT1032 using Tapatalk
Uploaded
test
going to test it.
will try in about... when the download finish lol haha thanks you, and i need any gapps? or just do clean install and try?
Downloading now, it's pretty big file compared to another roms
Edit: It won't boot, can't take logcat because already restored rom..
downloaded, installed and does not start, stuck in bootanimation MI
stuck at bootloader
tazlooney89 said:
downloaded, installed and does not start, stuck in bootanimation MI
Click to expand...
Click to collapse
Same here
If you can, send me a logcat please!
Enviado desde mi XT1034 usando Tapatalk 2
Bootloop
Sent from my XT1033 using XDA Free mobile app
sorry
josalaito said:
If you can, send me a logcat please!
Enviado desde mi XT1034 usando Tapatalk 2
Click to expand...
Click to collapse
Sorry but I can't xs
Downloading now. I'll grab a logcat later.
For whatever reason I can't do a logcat. It appears that it doesn't even boot far enough in to do so.
Sorry.
Thanks for your effort! I have long waited for a MIUI ROM on MotoG!
Gonna give it a try this weekend
josalaito said:
If you can, send me a logcat please!
Enviado desde mi XT1034 usando Tapatalk 2
Click to expand...
Click to collapse
I'm sorry but I do not allow logcat!
where are patchrom sources? Can u upload this to github?
Stuck in bootanimation
mario156090 said:
Stuck in bootanimation
Click to expand...
Click to collapse
You don't say XD
Sent from my XT1033 using XDA Free mobile app
K3VYNC said:
You don't say
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
hahahahaha, XD,
Any update?

Google Gapps MIUI V7 4.4.4 or CM 5.1.1 for Xiaomi Mi4

Hi, guys.
I'm looking for a full Google gapps for MIUI v7 on my Xiaomi MI4 and a full gapps for CM12.1, not a mini gapps.
And I found OPEN gapps and TK gapps were really not fit for these two ROMs.
I have already checked it for several times, but they still didn't work.
Can anyone help me to find it?
Or did I do something wrong when I flash the gapps???
Need extended partition for full gapps
Enviado desde mi MI 3W mediante Tapatalk
MIUI Has only 640mb x 2 partitions so it doesn't have sufficient space to flash full gapps,
Solution: Extend your partitions
Google a bit u will get to know
Sent from my MI 4W using Tapatalk
satvikvg said:
MIUI Has only 640mb x 2 partitions so it doesn't have sufficient space to flash full gapps,
Solution: Extend your partitions
Google a bit u will get to know
Sent from my MI 4W using Tapatalk
Click to expand...
Click to collapse
Yes, I found that.
danielf2992 said:
Need extended partition for full gapps
Enviado desde mi MI 3W mediante Tapatalk
Click to expand...
Click to collapse
Yes, can suggest some good ideas ??
chengmingyang8888 said:
Yes, can suggest some good ideas ??
Click to expand...
Click to collapse
Make a backup
Flash ZIP for extended partition
Restore backup
Flash gapps
Enviado desde mi MI 3W mediante Tapatalk
danielf2992 said:
Make a backup
Flash ZIP for extended partition
Restore backup
Flash gapps
Enviado desde mi MI 3W mediante Tapatalk
Click to expand...
Click to collapse
Okey, many thanks!!!!
chengmingyang8888 said:
Okey, many thanks!!!!
Click to expand...
Click to collapse
Your welcome
Enviado desde mi MI 3W mediante Tapatalk

Video failures on the Xperia Z3

Greetings to all in this wonderful and more complete group. For a few days in my Xperia Z3 after a full charge the mobile started to flash the screen, the mobile works completely without any problems, in any case I leave a video to see who can help me with the subject.
https://youtu.be/j4qepIhCtz4
Enviado desde mi D6653 mediante Tapatalk
fredd24 said:
Greetings to all in this wonderful and more complete group. For a few days in my Xperia Z3 after a full charge the mobile started to flash the screen, the mobile works completely without any problems, in any case I leave a video to see who can help me with the subject.
https://youtu.be/j4qepIhCtz4
Enviado desde mi D6653 mediante Tapatalk
Click to expand...
Click to collapse
What ROM do you use? And what kernel?
jimmy123322 said:
What ROM do you use? And what kernel?
Click to expand...
Click to collapse
At the moment I am using the original version of Sony 6.0.1 that following instructions from some I was told that with the option of Sony pc company should repair. On the other hand flashee the original rom of factory that brought the mobile 4.4.4. 577
Enviado desde mi D6653 mediante Tapatalk
fredd24 said:
At the moment I am using the original version of Sony 6.0.1 that following instructions from some I was told that with the option of Sony pc company should repair. On the other hand flashee the original rom of factory that brought the mobile 4.4.4. 577
Enviado desde mi D6653 mediante Tapatalk
Click to expand...
Click to collapse
Do you use Xposed, Root, BusyBox? Or other addons, or mods?
jimmy123322 said:
Do you use Xposed, Root, BusyBox? Or other addons, or mods?
Click to expand...
Click to collapse
At some point I was using it until the fault started, then I formatted the microsd and the internal memory to the factory state and even the fault persists
Enviado desde mi D6653 mediante Tapatalk
I recommend you to do a full reset through SONY EMMA tool
jimmy123322 said:
I recommend you to do a full reset through SONY EMMA tool
Click to expand...
Click to collapse
I've already done it from the "repair software" tool and still nothing
Enviado desde mi D6653 mediante Tapatalk
fredd24 said:
I've already done it from the "repair software" tool and still nothing
Enviado desde mi D6653 mediante Tapatalk
Click to expand...
Click to collapse
Through this? https://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/
jimmy123322 said:
Through this? https://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/
Click to expand...
Click to collapse
I thought this method was similar to the previous one I had said, I will try to follow the steps you suggest to me. Grateful for your help, when I finish, I'll let you know.
Enviado desde mi D6653 mediante Tapatalk
fredd24 said:
I thought this method was similar to the previous one I had said, I will try to follow the steps you suggest to me. Grateful for your help, when I finish, I'll let you know.
Enviado desde mi D6653 mediante Tapatalk
Click to expand...
Click to collapse
No problem
jimmy123322 said:
No problem
Click to expand...
Click to collapse
Friend jimmy123322, I downloaded the application emma sonny but there is a detail and is that my variant of Z3 is the D6653 and therefore is not compatible..Now you suggest ?. Thank you
fredd24 said:
Friend jimmy123322, I downloaded the application emma sonny but there is a detail and is that my variant of Z3 is the D6653 and therefore is not compatible..Now you suggest ?. Thank you
Click to expand...
Click to collapse
The only way if you have D6653 is try to use flashtool - https://github.com/Androxyde/Flashtool
jimmy123322 said:
No problem
Click to expand...
Click to collapse
Greetings again, I have flashed by Flashtool the factory version of android 4.4.4 and nothing, I have mounted lollilop 5.1 and 6.0.1 and the problem persists .. What I find strange is that when I turn on the phone the fault does not appear , Only when I enter the android desktop ... I am thinking of unlocking the Bootloader because some suggest that it may be the Kernel ... Do you know anything about it ?.
fredd24 said:
Greetings again, I have flashed by Flashtool the factory version of android 4.4.4 and nothing, I have mounted lollilop 5.1 and 6.0.1 and the problem persists .. What I find strange is that when I turn on the phone the fault does not appear , Only when I enter the android desktop ... I am thinking of unlocking the Bootloader because some suggest that it may be the Kernel ... Do you know anything about it ?.
Click to expand...
Click to collapse
Hi! The last chance is to flash a custom kernels for your model. If this won't help, then I have no idea how to fix it. Maybe it's hardware problem?
Well, in any case I appreciate your help and I hope some other member gives us a hand with this theme
Enviado desde mi D6603 mediante Tapatalk

Brick or Hardbrick

Hello, I have a serious problem.
I have installed the Revolution OS (formatting previously the corresponding, from a xiaomi.eu ROM), but the device does not advance, it is stuck in the splash screen.
Any suggestion, I can't get into the recovery.
Thanks in advance.
rey_lagarto said:
Hello, I have a serious problem.
I have installed the Revolution OS (formatting previously the corresponding, from a xiaomi.eu ROM), but the device does not advance, it is stuck in the splash screen.
Any suggestion, I can't get into the recovery.
Thanks in advance.
Click to expand...
Click to collapse
Use mi flash tool to restore the stock firmware.
Wrong section btw.
Enviado desde mi MI MIX 3 mediante Tapatalk
samusamu2304 said:
Use mi flash tool to restore the stock firmware.
Wrong section btw.
Enviado desde mi MI MIX 3 mediante Tapatalk
Click to expand...
Click to collapse
Yes, I know, but I knew I'd get a much quicker response here.
Could you tell me how to use it? I've downloaded several programs, but none of them get me where I need to go.
Among them is the one you mention.
Thanks again.
rey_lagarto said:
Yes, I know, but I knew I'd get a much quicker response here.
Could you tell me how to use it? I've downloaded several programs, but none of them get me where I need to go.
Among them is the one you mention.
Thanks again.
Click to expand...
Click to collapse
https://www.getdroidtips.com/guide-flash-miui-rom-xiaomi-devices/
Just google it
Enviado desde mi MI MIX 3 mediante Tapatalk
Solved!!!.
rey_lagarto said:
Solved!!!.
Click to expand...
Click to collapse
Ok, now delete the thread
Enviado desde mi MI MIX 3 mediante Tapatalk
I'm sorry, man, I don't know how to do it, and I don't know how to close the thread.
You see I'm not very smart.
Thanks for understanding.
rey_lagarto said:
Solved!!!.
Click to expand...
Click to collapse
How did you solve it? Flash from fastboot?
invisiblewave said:
How did you solve it? Flash from fastboot?
Click to expand...
Click to collapse
No, I flashed with MiFlash Pro.
Enviado desde mi MIX 3 mediante Tapatalk
rey_lagarto said:
No, I flashed with MiFlash Pro.
Enviado desde mi MIX 3 mediante Tapatalk
Click to expand...
Click to collapse
Ok, so it was a fastboot flash.
invisiblewave said:
Ok, so it was a fastboot flash.
Click to expand...
Click to collapse
Surely, but it needs a prepared ROM, I think you can only download from that software, even if you don't pay much attention to me, I'm not an expert.
Enviado desde mi MIX 3 mediante Tapatalk
rey_lagarto said:
Surely, but it needs a prepared ROM, I think you can only download from that software, even if you don't pay much attention to me, I'm not an expert.
Enviado desde mi MIX 3 mediante Tapatalk
Click to expand...
Click to collapse
Yes, some roms are packaged to be flashed directly from fastboot, some are packaged as a zip to be flashed from recovery.

Categories

Resources