hi guys
i installed wid Cm7 which was wrking fine on DEfy and i have backup for my froyo and CM7 aswell on my SD card. Now i was trying go in recovery mod then My screen is stuck on GOOGLE logo of CM , but still i can go on bootloader and recovery mod 3e. Not Clockwork Mod. whenever i start phone its come to the GOOGLE logo by CM n then stucks there. i tried to do wipe data n factory data, just took my chances if it could do miracle but didnt wrk either erroe comes.
I tried RSD Lite to flash back Stock Rom Froyo but seems like it cannot " show My device on it" b4 i try to flash. Even if i try to flash with RSD Lite its lands up to fail error. what shud i do any suggestion ? how can i make my device work again :| pls help or guide me out of this problem.
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom
I have a micromax bolt a67. i tried tried to install miui rom on the phone. an error took place. so i tried and tried but after few trials i stopped. when i tried to start my phone it did not start. bcoz the system got wiped somehow. i made a nandroid backup bfore the flashing of the rom but i couldn't recover it plz help me. i want to start and use my fone. i have cwm recovery and the only thing i can do is to boot into recovery mode
when i charge my phone it jst boots up and start the bootloop , i cannot even access recovery .
my phone is rooted but do not have twrp/cwm recovery , while flashing custom recovery (twrp)
this happend.
while using sp flash tool after downloading and doing write memory i tried to boot the phone but it was dead then i again connected it to charger and it jst started bootlooping .
once it also had black screen i could also see the touch but it had no response , now it jst bootloops again n again.
plzzz help.
Avestan said:
when i charge my phone it jst boots up and start the bootloop , i cannot even access recovery .
my phone is rooted but do not have twrp/cwm recovery , while flashing custom recovery (twrp)
this happend.
while using sp flash tool after downloading and doing write memory i tried to boot the phone but it was dead then i again connected it to charger and it jst started bootlooping .
once it also had black screen i could also see the touch but it had no response , now it jst bootloops again n again.
plzzz help.
Click to expand...
Click to collapse
my lenovo vibe k4 also got same problem of bootloop so i made a format by flashtool and then flashed stockrome again therefore my problem resolved
Avestan said:
when i charge my phone it jst boots up and start the bootloop , i cannot even access recovery .
my phone is rooted but do not have twrp/cwm recovery , while flashing custom recovery (twrp)
this happend.
while using sp flash tool after downloading and doing write memory i tried to boot the phone but it was dead then i again connected it to charger and it jst started bootlooping .
once it also had black screen i could also see the touch but it had no response , now it jst bootloops again n again.
plzzz help.
Click to expand...
Click to collapse
Yes. You want to flash stock rom to recover your Android.
dr.aashish said:
my lenovo vibe k4 also got same problem of bootloop so i made a format by flashtool and then flashed stockrome again therefore my problem resolved
Click to expand...
Click to collapse
i tried to flash the stock rom , But my phone isn't connecting to my pc. If you can help pls reply.
Hi... Friends...
I m normal android user... but few days ago i tryed to flash stock firmware in my Micromax E313. ( From here http://forum.xda-developers.com/android/general/micromax-canvas-xpress-2-e313-official-t3208290)
I flashed this firmware many times on my phone every time it works good but at this time in recovery it shows that can't mount /data. I tryed many times to formate but it's doesn't work. After this i formated my device using sp flash tool and installed again but it's not working. I also tryed to flash stock kitkat firmware but it's not solved. After this i installed twrp recovery and tryed to repair partition and last i tryed unbrick hard bricked method but nothing happened.
So please help me... Thanks in advance...