I have a micromax bolt a67. i tried tried to install miui rom on the phone. an error took place. so i tried and tried but after few trials i stopped. when i tried to start my phone it did not start. bcoz the system got wiped somehow. i made a nandroid backup bfore the flashing of the rom but i couldn't recover it plz help me. i want to start and use my fone. i have cwm recovery and the only thing i can do is to boot into recovery mode
Related
Hello Everyone, I am a Noob in Flashing Custom ROM...
I use Micromax Canvas A63 (Rooted)
I successfully Flashed Xperia Custom ROM in my Phone, But after Flashing it, My phone could'nt detect my SIM. There is no problem in my SIM card as i had used it on another mobile phone and it was working...
The major problem starts Now: -
After that, I Restored the Backup of the STOCK ROM and rebooted my device (in hope to reverse all the things back).. But after that it got stucked in Boot Loop and is not starting beyond that Xperia Animation.
I Tried lots of Methods like- WIpe Dalvik Cache, Format/Cache, Format Data etc.. but still it is stucked in boot loop..
PLEASE SOMEBODY TELL ME THE HOW TO CORRECT IT
Hi,
There's some link in the first post here, including your stock firmware. You can read this carefully and ask any questions you may have there too,
http://forum.xda-developers.com/showthread.php?t=2795960
Good luck!
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom
Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
praik96 said:
Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
Click to expand...
Click to collapse
Don't worry my friend one and only one solution just flash the stock ROM with flashing tools. You can search in XDA thread regarding this....
Else download the latest from this link
http://xdafirmware.com/micromax-a117
For flashing instructions follow this link-
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
not able to install other ROM s in a117
Sir I installed xld ROM 1.3 first time ,it booted successfully but it lacks sim toolkit (sim not supporting) ,whenever I try to install any other ROM it sticks to the boot image (bootloop) but at the same time xld ROM is easily installed
I have tried everything, formatting data ,cache in Mount and storage, cleared dalvik and partition
So pls guide me a solution
Thanks
I accidently flashed dark l(Micromax unite 2 version) custom rom in my Micromax unite 3 q372.It flashed properly but I was unable to start my phone.So I tried to restore my phone by nandroid back up via cwm recovery.It is also showing successfully restored.but when I am trying to reboot my phone ,it is going to recovery mode again.I have tried to wipe cache,data,dalvik cache and again restored nandroid back up.but same thing is happening.after rebooting it is going to recovery mode again.plz plz tell me how to fix this.
raymondbqg said:
I accidently flashed dark l(Micromax unite 2 version) custom rom in my Micromax unite 3 q372.It flashed properly but I was unable to start my phone.So I tried to restore my phone by nandroid back up via cwm recovery.It is also showing successfully restored.but when I am trying to reboot my phone ,it is going to recovery mode again.I have tried to wipe cache,data,dalvik cache and again restored nandroid back up.but same thing is happening.after rebooting it is going to recovery mode again.plz plz tell me how to fix this.
Click to expand...
Click to collapse
i dont have your device, but the solutions for this situation are pretty limited. im kinda suprised putting the correct rom back on didnt fix it.
i believe your best move (maybe only move) would be to flash the factory files back on.
if you dont have them, or dont know how to use them try searching google like this "Micromax unite 3 q372 return to stock" or "Micromax unite 3 q372 stock firmware".
do a factory reset. worked for me
Dude, Unite 2 and Unite 3 has different Mount points. Your device might be in soft brick. Only way to get back is flashing the stock firmware. I think restoring nandroid won't help , still you can try
I have accidently flashed dark l unite 2 version in my Micromax unite 3q372.Surprisingly it flashed completely.But when I rebooted my phone I t was not booting.So i tried to restore nandroid backup after clear cache and data and wiping data.but after restoring nandroid backup ,when I rebooting my phone ,it is showing Micromax logo and then going to recovery mode.I tried so many times but after rebooting it is going always to recovery mod.plz help me to fix this
plz plz help me
tried to falsh stock ROM by sp flash tool.but I failed.plz plz help me .my sis crying.it is my sisters phone.plz help me .
Hi,
Try posting your question here:
Questions and Answers
The experts there may be able to help.
Good luck!