okay.to start off,i've been following this guide here to unlock my bootloader(*i dint know about xda before,as i see xda guide are way easy-,- ). so everything went fine and yes my XL are "Bootloader unlock allowed". i have followed every single step on that site and at the last step where you need to put your unlock boot loader key,this is where i think i've may screwed it up. it doesn't show any successful note or anything so i thought it was done but then again i've checked my bootloader status and it still remain the same as "Bootloader unlock allowed" which it suppose to be "Bootloader unlock done".
Okay that wasn't the worst part. so as i have failed, i decide to google about this thing and found out this guide here. so i've followed it,right up until when i need to connect my phone through BLU. this PART where i go seriously INSANE. it just that nothing happen. i've managed to enter fastboot before with sony guide but this i just dont know whats wrong with it. so ive checked up about it's and notice its probably my driver problem. so i've found this here go through with it and yet failed again. -,-
OKAY THIS IS THE WORST PART. so as i've bumped at failure and decide to give up on this thing then i've notice that my phone cannot be charged when it is off. really bump about this. i know im a newbie and i know my place.but please anyone help me on this. i dont care about unlocking my bootloader anymore, i just want my normal phone back where i can charged it when its off.
AATrooperz said:
okay.to start off,i've been following this guide here to unlock my bootloader(*i dint know about xda before,as i see xda guide are way easy-,- ). so everything went fine and yes my XL are "Bootloader unlock allowed". i have followed every single step on that site and at the last step where you need to put your unlock boot loader key,this is where i think i've may screwed it up. it doesn't show any successful note or anything so i thought it was done but then again i've checked my bootloader status and it still remain the same as "Bootloader unlock allowed" which it suppose to be "Bootloader unlock done".
Okay that wasn't the worst part. so as i have failed, i decide to google about this thing and found out this guide here. so i've followed it,right up until when i need to connect my phone through BLU. this PART where i go seriously INSANE. it just that nothing happen. i've managed to enter fastboot before with sony guide but this i just dont know whats wrong with it. so ive checked up about it's and notice its probably my driver problem. so i've found this here go through with it and yet failed again. -,-
OKAY THIS IS THE WORST PART. so as i've bumped at failure and decide to give up on this thing then i've notice that my phone cannot be charged when it is off. really bump about this. i know im a newbie and i know my place.but please anyone help me on this. i dont care about unlocking my bootloader anymore, i just want my normal phone back where i can charged it when its off.
Click to expand...
Click to collapse
Firstly I welcome you at xda forum. Keep your calm. It will be fixed.
Now then, firstly you need to install DRIVERS for your device.
Secondly you will need to FLASH FTF firmware using FLASHTOOL after downloading FTF.
Thirdly, you need to be patient as it will take a bit of time for you as you are new to all this.
Install drivers from :
HERE
Secondly download FTF firmware from here
http://forum.xda-developers.com/showthread.php?t=2502970
Download flashtool :
http://www.flashtool.net/download.php
Next thing you need to do is FLASH FTF to your phone.
You must paste your FTF file in your flashtool/firmwares/HERE
Next you need to turn off your phone and then hold volume DOWN key and at the same time connect your phone via USB cable to the PC.
Next , open flashtool and install FTF using the RIGHT file you put in the folder. Don't install file from Xperia x8 or something that is already present.
Flash..
You are good to go! Good Luck
Hnk1 said:
Firstly I welcome you at xda forum. Keep your calm. It will be fixed.
Now then, firstly you need to install DRIVERS for your device.
Secondly you will need to FLASH FTF firmware using FLASHTOOL after downloading FTF.
Thirdly, you need to be patient as it will take a bit of time for you as you are new to all this.
Install drivers from :
HERE
Secondly download FTF firmware from here
http://forum.xda-developers.com/showthread.php?t=2502970
Download flashtool :
http://www.flashtool.net/download.php
Next thing you need to do is FLASH FTF to your phone.
You must paste your FTF file in your flashtool/firmwares/HERE
Next you need to turn off your phone and then hold volume DOWN key and at the same time connect your phone via USB cable to the PC.
Next , open flashtool and install FTF using the RIGHT file you put in the folder. Don't install file from Xperia x8 or something that is already present.
Flash..
You are good to go! Good Luck
Click to expand...
Click to collapse
but i think my driver are good,and flashtool can read my device when its on just that the problem is now,my phone cant be connected to pc when its off. so i cant flash anything atm.plus i cant charge it when it off.
i keep on thinking that maybe i've just softbricked my phone
thanks a bunch thou for your help. but i think theres nothing i can do here.i've give up.plus the phone are working fine anyway,just that i cant flash anything thou. which is sucks but i'll manage it thou,somehow
Did you press vol down for flashmod and vol up for fastboot?
Open flashtool, don't click on any button just push vol down and push usb cable, then you will see if flashtool recognize your phone or will ask for drivers.
Sent from my C2105 using xda app-developers app
siankatabg said:
Did you press vol down for flashmod and vol up for fastboot?
Open flashtool, don't click on any button just push vol down and push usb cable, then you will see if flashtool recognize your phone or will ask for drivers.
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
yes,i have done that 1000x times,and still nothing seems to work.i've even waited almost 1/2 an hour as i think it maybe take some time to load up but then again...nothing
i think the main problem is why my phone cannot be charged when it was off. as it does fine when i first got it? this is the real question because i think if your phone cant recognized the usb input while it was off then how the hell it gonna be discovered into flashmode or even flashboot. this is whats bugging me.
p.s,yes i have tried to flash with other computer,and still got the same result.
Try install adb driver with flastool drivers..you can find it under drivers folder via flashtool
Your bootloader is not unlocked and you can give it to service without problems.Maybe usb is broken. Use it till phone shut down, go to service and tell them that it don't want to charge.
Sent from my C2105 using xda app-developers app
siankatabg said:
Your bootloader is not unlocked and you can give it to service without problems.Maybe usb is broken. Use it till phone shut down, go to service and tell them that it don't want to charge.
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
thats... actually a brilliant idea!!good thinking!!im gonna go ahead and drain my battery now, thanks a bunch dude!! i hope that they'll able to repair my phone thou.thanks again siankatabg!!
AATrooperz said:
thats... actually a brilliant idea!!good thinking!!im gonna go ahead and drain my battery now, thanks a bunch dude!! i hope that they'll able to repair my phone thou.thanks again siankatabg!!
Click to expand...
Click to collapse
No problems and please give feedback for others that may have this problem in future.
Good luck.
Sent from my C2105 using xda app-developers app
Related
Hi All,
I rooted my tipo a month ago with "Bin4ry_v17" script, and it works fine for me
yesterday at some point during the day my phone just switch off
Ok, I thought the battery is discharged than I try to charging, but nothing happend (no red led light)
I try to switch it on but
1, phone vibrate once and nothing else
or
2, red led blinking three times and nothing else ..
I try to connect it to my laptop via USB (holding SND down) therefore green led starting to lightuntil I pull off the USB cable.
So If anybody can tell me some comforting words about my phone I will respect
Can I switch on anyway this phone ?
Regards,
Andrew
Do u have flashtool get it from google
Get ftf file from teammex's link
U will get a guide with flashtool install all drivers
Connect device as u did earlier and flash the ftf file
REMEMBER GET FTF FILE OF YOUR DEVICE ONLY IF U FLASH IT WRONG REFLASH RIGHT ONE root it like earlier then get CWM recovery make back up if there is a problem in flashing share your flashtool log
Sent from my ST21i using xda app-developers app
Sry 4 all, i was so impatient, after i wrote this, i run the process again and go to take a smoke, so when i back my phone switched on.
Sent from my ST21i using xda app-developers app
haades said:
Sry 4 all, i was so impatient, after i wrote this, i run the process again and go to take a smoke, so when i back my phone switched on.
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
You smoke good stuff then.
Sent from my ST27i
Can i unlock bootloader in bricked stage
I have a bticked tipo and just want to ask if i can unlock bootloader in the bricked stage
and also cani flash without unlocking boot loader
You can flash ftf files with locked bootloader. But if you have locked bootloader you can use sus or pcc
Sent from my LT18i using xda premium
Hi all!
I'm trying to install jellybean on my xperia tipo. Once it says unlock bootloader allowed. yes. I tried many things to unlock. No results.
after using the ez-unlock app, I turn off my tipo, connect to usb via fastboot mode, try to flash kernel, it still says that my phone is locked.
After that when I try to start my phone, it vibrate but nothing happens.. even connecting the charger have nothing on screen.. help.. :crying:
Follow the Instructions in Sony as this is sure to work if you followed all the instructions http://unlockbootloader.sonymobile.com/, If it works please hit thanks it means alot to me
I followed all the instructions. Fastboot did respond when I typed getvar. It gives 0.5. But when come to unlock, it says failed. Thanks anyway! Anybody knows how to unlock if it respond 0.5, because I always read 0.3 on other phones?
zainal2adidin said:
I followed all the instructions. Fastboot did respond when I typed getvar. It gives 0.5. But when come to unlock, it says failed. Thanks anyway! Anybody knows how to unlock if it respond 0.5, because I always read 0.3 on other phones?
Click to expand...
Click to collapse
Not necessarily...
I didn't even get a response buy I unlocked bootloader..
The output is different for different devices and computer
So is your device working now??
It is always best to follow stable unlockin meathods like sony's guide or flashtool than other apps..
Explain more so that we can help
thank me if I helped you...Don't say it,hit the button...
I tried exactly using the mothod given by sony site, but it says unlock failed. When I tried ez-unlock, that's when I got the phone not working. It vibrate when I tried to start, but nothing happens. I'm currently downloading stock firmware (30% - my country's connection is very low) but I'm not sure how to flash this stock when I even can't boot my phone?
Thanks in advance.
zainal2adidin said:
I tried exactly using the mothod given by sony site, but it says unlock failed. When I tried ez-unlock, that's when I got the phone not working. It vibrate when I tried to start, but nothing happens. I'm currently downloading stock firmware (30% - my country's connection is very low) but I'm not sure how to flash this stock when I even can't boot my phone?
Thanks in advance.
Click to expand...
Click to collapse
Okay lemme explain
The phone necessarily doesn't need to boot... All we need is the phone to allow us to flash
Ever upgraded using pc companion?? After downloading files,you power off the device and then connect it with pressing volume key..
The same method is done here..
Just download the file..
Install flashtool, and its drivers from installation location,,
Now place the downloaded file in firmware folder..
Open flashtool..click the thunder icon...a pop up will come..select flashmode (always to flash firmware)
select the file you placed in firmware and click flash..
The tool will prepare the files and then it will ask you to connect.. Then,plug your usb while holding down the flashmode button (i think it it volume down)
A green led will light up and then it will do the job...when it says FINISHED, THEN AND ONLY THEN REMOVE THE DEVICE..
If you have any trouble just ask
And if you wanna make sure it will work..now itself just connect your device to computer holding down the volume down button
If green led lights up,.chances are high for your device to recover
thank me if I helped you...Don't say it,hit the button...
I've finished downloading the firmware. It was a zip file, I renamed it to FTF and pasted it as you say. Now my phone boots again. thanks! Now I want to find cm10 kernel for tipo. I can't find it in their official site..
zainal2adidin said:
I've finished downloading the firmware. It was a zip file, I renamed it to FTF and pasted it as you say. But now it say no drivers for the device. What? I'm using Tipo in my PC for a while now, how come it doesn't have drivers? I've installed the given driverr.
How can I manually install xperia tipo drivers for flashtools?
Click to expand...
Click to collapse
Dude,are u sure it is not a zip to be extracted?just make sure of renaming
Now about drivers..install the drivers fromc/flashtool/drivers assuming u have installed it to root of c drive
Select fastboot and flashmode drivers at the end of drivers list in the application..
That should work..
thank me if I helped you...Don't say it,hit the button...
Thanks a lot, man!! I'm trying to flash CM10 right away. My phone is booted....
zainal2adidin said:
Thanks a lot, man!! I'm trying to flash CM10 right away. My phone is booted....
Click to expand...
Click to collapse
Don't say it...hit the button
thank me if I helped you...Don't say it,hit the button...
thanks to all. I've unlocked my phone!
I know there are probably lots of threads about this, but I couldn't find one about E3 since it's a relatively new phone, but to point now
So I tried to update my Xperia E3 to it's latest firmware via the Sony pc companion(it was the only option) and during the update ,once it was downloaded it prompted to connect the phone through the USB cable, once done it began installing the update but when it was like at 80-85% it showed an error saying that internet connection isn't available and gave two options to either retry or cancel, now the internet was just working fine, I checked google, Youtube everything and it was working, but every time I hit retry it gave the same option ,so eventually I canceled the update,
Now the phone was switched off so I tried switching it on and it just froze at the sony boot logo screen, restarting with power button+volume up only restarts it to the same situation(stuck at logo screen), I did look up for a solution but couldn't find one that fit,
Of course I did switch it off using the off button at the back of phone(under the back cover), and I know about Sony Update service but that's no longer supported(it required the phone in off state), pc companion can't detect an off phone and when it does it starts phone to boot frozen screen and fails at detect step, another thing I found was a custom tool(possibly just SUS) that could flash a firmware in an off phone but however there is no firmware available for my version, since I live in India, so there's that , any help is appreciated,
A few things:
-The battery was at 91% when update started
-There was no root attempt etc made on phone, it was complete stock
-I did update the firmware once earlier but just from the phone it was a 2 mp update, no pc
-When I started this update there was already a 29 mb something update available without pc, and that's pretty much all, like I said any help is appreciated
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
It worked
Benjoy Ericsson said:
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
Click to expand...
Click to collapse
Thanks man, it worked, the phone is good and running again.
Benjoy Ericsson said:
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
Click to expand...
Click to collapse
Hello, my device is D2212 and I have similar problem.
I've rooted and unlocked bootloader using this method from XDA forum to root Xperia E3. However after unlocking bootloader and root my device my PC and my notebook doesn't recognize my device to transfer data or access data of cellphone. It keeps in charging mode.
Today it was really weird and lagging way too much so I tried to reset to factory setting. After that my device does not start android it keep stuck on blue screen right after display of Xperia and android.
I tried this method you suggested of PC Companion but it does not work since PC does not recognize my device anymore since rooting.
I need help here, please.
O just bought this device last week.
Thanks in advance.
Cristy0505 said:
Hello, my device is D2212 and I have similar problem.
I've rooted and unlocked bootloader using this method from XDA forum to root Xperia E3. However after unlocking bottloader and root my device my PC and my notebook doesn't recognize my device to transfer data or access data of cellphone. It keeps in charging mode.
Today it was really weird and lagging way too much so I tried to reset to factory setting. After that my device does not start android it keep stuck on blue screen right after display of Xperia and android.
I tried this method you suggested of PC Companion but it does not work since PC does not recognize my device anymore since rooting.
I need help here, please.
O just bought this device last week.
Thanks in advance.
Click to expand...
Click to collapse
Flash the firmware again using flashtool.
adrianocolvero said:
Flash the firmware again using flashtool.
Click to expand...
Click to collapse
Hi, thank you for your kind support.
Do you mean which part of this tutorial? http : // forum.xda-developers.com/xperia-e3/general/root-e3-t2964845
First "HOW TO UNLOCK YOUR BOOTLOADER!" or second "NOW HOW TO FLASH THE KERNEL AND APPLY THE ROOT!"?
Best regards!
Cristy0505 said:
Hi, thank you for your kind support.
Do you mean which part of this tutorial? http : // forum.xda-developers.com/xperia-e3/general/root-e3-t2964845
First "HOW TO UNLOCK YOUR BOOTLOADER!" or second "NOW HOW TO FLASH THE KERNEL AND APPLY THE ROOT!"?
Best regards!
Click to expand...
Click to collapse
Use this tutorial:
http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
With this firmware:
http://forum.xda-developers.com/xperia-e3/general/firmware-18-4-b-2-14-rool-xperia-e3-t2939699
adrianocolvero said:
Use this tutorial:
http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
With this firmware:
http://forum.xda-developers.com/xperia-e3/general/firmware-18-4-b-2-14-rool-xperia-e3-t2939699
Click to expand...
Click to collapse
Thank you very much, sir!
hai guys i have a xperia e3 dual d2212 i'm not sure whether it's rooted or unlocked bootloader it stucks on logo screen i try to flash it using flash tool but it says
ERROR drivers needed to be installed for connected device
ERROR you can find them in the drivers folder of flashtool
but i searched there there no devices mentioning e3 only e is available
in this condition should i flash or there is any other way please give me a solution
Hello I have a Sony experia e3 and it is giving me a problem. When I'm trying to start my phone it is booting and gets off by itself and again restarts...and this is going on and on. So please can you help me or give me a suggestion about how to fix it.
Please please please help for which I may remain ever greatful to you
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.
Kindly Help me,
I was Flashing my Z3 by Flash Tool , i accidently select D6646 ftf file instead *of D6616 ftf , during flashing Flash Tool gives error at Kernal.sin and Phone goes Down,
No Soft or Hard Reset Work,
NO Flashmood / Fastboot Mood work ,
Flash Tool only Show
'Device connected with USB debugging off
19/021/2017 07:21:01 - INFO *- For 2011 devices line, be sure you are not in MTP mode
and Device Manager Shows SOMC Flash Drive,
When Connect By press Vol Down button and Attach USB Cable, USB not Recognized Error Shows*on Windows 7
I have TA backup from Flash Tool ( ie T1 and T2 ) before flashing in case of Partition break, where as
I realize its kernel brokeup
Kindly Plese Guide me what can I do to live my phone back
are you sure fastboot mode doesnt work? just power off and press vol+ and power if led is blue then you are is fastboot mode. then try to flash kernel.sin in adb command with pc . cheers
Yes sir sureonly red led show just for 2 3 sec n then goes off flash tool shows debugging mode off .. i disconnect battery to completly shut off phone after that i connect n same probelm
https://forum.xda-developers.com/showthread.php?t=2646405
xkeita said:
https://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
ihad used that trick after whole day research , I can conclude S1tools does not support 2012 upgrade model, I received error as ID HASH IS NOT SUPPORTED,
however my bootloder is unlocked, and I hav unlocked code also, and also phone is rooted ,
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
nailyk said:
Yes this could work for us as we still doesn't have the preloader dump.
AFAIK there is not unbricking way for now.
Somewhere I read that pc companion could work with Q9008. Also worth to try with emma.
I want working on this to finalize the unbricking guide but will not be soon as I need my device for the rom port. When done I will work on this unbricking.
Also it is not a kernel problem. Your flash replaced s1 bootloader with a wrong one.
Good luck a be patient
What about this: https://forum.xda-developers.com/showthread.php?t=1849170 ?
Click to expand...
Click to collapse
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
talharais said:
Thankq sir, for your reply so if its s1 bootloader then is it possible to bring my phone again live will u guide me what the next thing should i do
Click to expand...
Click to collapse
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
nailyk said:
Sorry for confusing :s
I think, today, there is no way.
You can try with the official emma flash tool or pc companion but I really doubt.
Click to expand...
Click to collapse
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
talharais said:
Ohhh , sir i have TA backup still cant do anything and also charging also doesnot solve problem as mention in one of the xda thread
https://forum.xda-developers.com/showthread.php?t=1849170&page=1
Click to expand...
Click to collapse
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
nailyk said:
Not related with TA backup for now. You change your bootloader with a wrong one.
It is almost like if you flash the wrong bios on your mother board. You can't flash it again until someone find an 'electronic' way.
Give a try with pc companion or emma.
Click to expand...
Click to collapse
Pc companion is not reconize the fevice actually i explain what i idid,
I was flashing d6616 by flash tool
Firstly i unlock bootloder by sony , through unlock code they email then i rooted the device by kingo root n then flash accidently i chosse d6646 rom instead of d6616 rom then during flashing flashtool gives error at kernal.sin and after that device goesoff
When i plug into the pc it reconize my device as SOMC Flash device andflash tool gives dubugging off
Thats was the whole senrio by which my device brick so after whole story i really disappointed to know that my device is just use for paper weight... :crying:
I downloaded the emma after install it desnot show any usb device
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
nailyk said:
You own a d6616? It have unlockable bootloader :s
Send it to repair center. No other choice.
And yes it is confusing, it say bootloader unlock after the fastboot command but it is not true.
@blackhawk_LA made some posts about D6616. Maybe he could help you.
I just post here to announce you the bad new your device is hardly softbricked.
Click to expand...
Click to collapse
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
talharais said:
Service status shows unlock bootloader to yes.. well very thankful for you reply means there is no way to unbrick my phone
Click to expand...
Click to collapse
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
nailyk said:
Keep an eye on https://forum.xda-developers.com/z3/devs-only/unbricking-d6603-t3365262
I just brick my device too so will try to make some progress on it
Click to expand...
Click to collapse
Tanks buddy I am watching your thread, and also let me know when done,
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
dude i have the same problem as yours i have a z3 d6643 and i made a mistake when downloading the kernal the device loads normal flash mode and flashtools working! power button + volume down runs twrp but it no longer starts at sony black screen someone please help!
evilhedrox said:
Hi, I decided to post it here because it seems that anything I post on Xperia Ion forum is not read, it is inactive.
I already searched everywhere and I'm loosing my hopes. I'm trying to revive an Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Click to expand...
Click to collapse
Same problem with an XZ, someone has a solution?
sometime Win recognize the device as QUSB_BULK