Hello.. I want to know how to increase the sound of my Phone.. Actually i did increased the sound of loudspeaker and headset through Engineering mode.. But my inner speaker sound is very low. The one we use during call. How do i increase that volume?
Help will be appreciated.
Sent from my Qmobile Noir A10 using Tapatalk
had the same problem!
mrtaim3 said:
Hello.. I want to know how to increase the sound of my Phone.. Actually i did increased the sound of loudspeaker and headset through Engineering mode.. But my inner speaker sound is very low. The one we use during call. How do i increase that volume?
Help will be appreciated.
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
I was having the same problem...i was even regretting buying the phone because i cant even go out without seeing like 3 missed calls because the sound is so low!
anyway i am not rooted yet so this is how i did it
go to engineer mode by going to your number dialer and entering the following code without quotes
"*#*#3646633#*#*"
Be sure to enter the * and the # correctly.
if you have entered it right then the phone will automaticaly take you to engineer mode.
the fourth option or so will be "Audio"
click on it and then select Loudspeaker mode
at the bottom you should see something like value is 0-140 and below that Max vol. 0-160
change the max volume from whatever it is to 145 or below. you can go to 150 but the sound quality is bad and even if it sounds good dont do it cause it might damage the speaker. Im doing 145 and its perfect.
once you have decided on the number click set and then try calling your phone up
hope that helped.
jaberwockie said:
I was having the same problem...i was even regretting buying the phone because i cant even go out without seeing like 3 missed calls because the sound is so low!
anyway i am not rooted yet so this is how i did it
go to engineer mode by going to your number dialer and entering the following code without quotes
"*#*#3646633#*#*"
Be sure to enter the * and the # correctly.
if you have entered it right then the phone will automaticaly take you to engineer mode.
the fourth option or so will be "Audio"
click on it and then select Loudspeaker mode
at the bottom you should see something like value is 0-140 and below that Max vol. 0-160
change the max volume from whatever it is to 145 or below. you can go to 150 but the sound quality is bad and even if it sounds good dont do it cause it might damage the speaker. Im doing 145 and its perfect.
once you have decided on the number click set and then try calling your phone up
hope that helped.
Click to expand...
Click to collapse
I have mentioned in my post that i have increased the sound... Though loudspeaker sound increased.. But i wanted to increase the upper speaker volume. By which we listen while talking on call.
Sent from my Qmobile Noir A10 using Tapatalk
mrtaim3 said:
I have mentioned in my post that i have increased the sound... Though loudspeaker sound increased.. But i wanted to increase the upper speaker volume. By which we listen while talking on call.
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
Make all 3 Normal, Headset & Loudspeaker
Max Vol. 0~160 = 150
it's safe..
or try This
He is taking about the in call speaker . That is low for me too .
Sent from my GT-I9300 using Tapatalk
ekhasti said:
Make all 3 Normal, Headset & Loudspeaker
Max Vol. 0~160 = 150
it's safe..
or try This
Click to expand...
Click to collapse
Im talking about in call speaker bro..
Sent from my Qmobile Noir A10 using Tapatalk
jaberwockie said:
I was having the same problem...i was even regretting buying the phone because i cant even go out without seeing like 3 missed calls because the sound is so low!
anyway i am not rooted yet so this is how i did it
go to engineer mode by going to your number dialer and entering the following code without quotes
"*#*#3646633#*#*"
Be sure to enter the * and the # correctly.
if you have entered it right then the phone will automaticaly take you to engineer mode.
the fourth option or so will be "Audio"
click on it and then select Loudspeaker mode
at the bottom you should see something like value is 0-140 and below that Max vol. 0-160
change the max volume from whatever it is to 145 or below. you can go to 150 but the sound quality is bad and even if it sounds good dont do it cause it might damage the speaker. Im doing 145 and its perfect.
once you have decided on the number click set and then try calling your phone up
hope that helped.
Click to expand...
Click to collapse
You have nicely guided mate Your first thanx is from my side
But it needs a little modification to help.
mrtaim3 said:
Hello.. I want to know how to increase the sound of my Phone.. Actually i did increased the sound of loudspeaker and headset through Engineering mode.. But my inner speaker sound is very low. The one we use during call. How do i increase that volume?
Help will be appreciated.
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
To increase In Call Volume
You have to go in Engineering mode by this code
"*#*#3646633#*#*"
Then go to Audio & Select Normal Mode
And do as following:
Value is 0 ~ 255 = 108
Max Vol. 0 ~ 160 = 154
Sounds good..gonna try it out soon and report
Sent from my GT-I9500 using Tapatalk 4
Use this app it might help
use android assistant app it might help u . it have voice setting option in app's tools tab. By that u can adjust the voice call volume .
.......................
hit thanks if it helped you
app link below:
https://play.google.com/store/apps/details?id=com.advancedprocessmanager&hl=en
Related
My only gripe is the in call volume is way too low.
Have you checked the Hearing aid compatibility under your settings. On my vibrant, HAC mode made it really loud.
I've searched, I've read threads, I still havent found a good solution to this. I have the in call volume turned all the way up just to have it at a "normal" volume level, but then when I get one of those people with a quiet phone, I have no more adjustment to turn it up louder.
Why is it so hard to build a phone where the LOW volume is at a "normal" level so you can use the HIGH level for certain times you have a quiet call or are in a loud environment (like a shop where I work)?
I have Volume+ on my phone, but it doesnt do anything for the in-call volume. Also, when I go into settings/call there is NO OPTION for hearing aid whatever on any of the ROMs I've been running.
Does anyone know what file it is in the ROM which dictates the volume? Or is it in the kernel? Anything that could help? This is severely aggravating...
~T.J.
Anyone?
Sent from my HTC Sensation 4G using XDA App
when your in a call click the volume rocker up? or tell the person your talking to speak loud
A lot of people have good success with Volume+.
the_scotsman said:
A lot of people have good success with Volume+.
Click to expand...
Click to collapse
.. volume plus does not increase in-call volume, as the man says:
" Hi
I'm currently attempting to raise/improve the call volume but have so far been unsuccessful (when a call is active, the phone takes over all audio control, which i'm trying to get back, but I don't know if it's even possible).
For news and updates please see my website "
fango_vk said:
.. volume plus does not increase in-call volume, as the man says:
" Hi
I'm currently attempting to raise/improve the call volume but have so far been unsuccessful (when a call is active, the phone takes over all audio control, which i'm trying to get back, but I don't know if it's even possible).
For news and updates please see my website "
Click to expand...
Click to collapse
Hmmm...I was sure Volume+ also worked for in call volume...guess not
Yup. It works for my headphones and external speaker, but not the in call speaker.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Is there a fix to make the speaker on the Sensation 4G louder? I can barely hear the speakerphone and the alerts are also very quiet. Volume+ didnt work. I am running IC 3.3.4
f10a said:
Is there a fix to make the speaker on the Sensation 4G louder? I can barely hear the speakerphone and the alerts are also very quiet. Volume+ didnt work. I am running IC 3.3.4
Click to expand...
Click to collapse
Does volume Plus work with ICS? My sensation benefited greatly when I installed that app on 2.3.4
tiguy99 said:
Does volume Plus work with ICS? My sensation benefited greatly when I installed that app on 2.3.4
Click to expand...
Click to collapse
He said IC, not ICS. IC = Insert Coin, ICS = Ice Cream Sandwich
I too am having volume issues, mostly the ear piece speaker. Volume+ does nothing for this, but it did help with my speaker phone, media, and alerts. Too bad I dont care as much about those as I do being able to hear my phone, after all, thats what its meant to do, make calls
~T.J.
yeah the earpiece really sucks. Its so hard to understand people when ur outside. Cant believe still no one made a mod for it
If it's a limitation of the hardware, then we might be stuck with it. Hopefully someone comes up with a proper solution or at least a workaround.
I keep telling you guys volume plus works. Make sure you get the pay version and not the free one. I used it with my stock sensation 2.3.4 ROM.
Make sure you use the advanced settings.
1st bar set to 11
2nd bar set to 50
3rd to set to 200
4th bar set to 200
5th bar set to 200
Vol increase set to 0
Bass boost set to 1
echo set to 3
With these settings on the two highest settings you'll not only be able to hear your callers but it'll be extremely loud especially the highest setting. The highest two settings are not only loud but they are crystal clear.
I actually enjoyed talking on my sensation over my jawbone icon. Good luck with the settings & enjoy the new call volume!
Volume of Sensation seems fine to me, ringtone and speaker.
I always use custom kernels and ROM's. Maybe volume level is boosted in one of these? I am not sure....maybe I am just not picky about volume.
tiguy99 said:
I keep telling you guys volume plus works. Make sure you get the pay version and not the free one. I used it with my stock sensation 2.3.4 ROM.
Make sure you use the advanced settings.
1st bar set to 11
2nd bar set to 50
3rd to set to 200
4th bar set to 200
5th bar set to 200
Vol increase set to 0
Bass boost set to 1
echo set to 3
With these settings on the two highest settings you'll not only be able to hear your callers but it'll be extremely loud especially the highest setting. The highest two settings are not only loud but they are crystal clear.
I actually enjoyed talking on my sensation over my jawbone icon. Good luck with the settings & enjoy the new call volume!
Click to expand...
Click to collapse
Where do you change those? The free version has no provision for the ear piece speaker, does thrpay version add it?
Sent from my HTC Sensation XE with Beats Audio using XDA App
Nope, it does not work
tiguy99 said:
I keep telling you guys volume plus works. Make sure you get the pay version and not the free one. I used it with my stock sensation 2.3.4 ROM.
Make sure you use the advanced settings.
1st bar set to 11
2nd bar set to 50
3rd to set to 200
4th bar set to 200
5th bar set to 200
Vol increase set to 0
Bass boost set to 1
echo set to 3
With these settings on the two highest settings you'll not only be able to hear your callers but it'll be extremely loud especially the highest setting. The highest two settings are not only loud but they are crystal clear.
I actually enjoyed talking on my sensation over my jawbone icon. Good luck with the settings & enjoy the new call volume!
Click to expand...
Click to collapse
I just tried all of your settings and my speakerphone volume is exactly the same as without Volume+. Good thing the app creator has the paid version for free on his website.
I tried Volime+ payed with those settings.. And my volume is even lower than it was without Volume+. ANd then i realised : "it is not that low (generaly, without volume+).
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Mee too low vol
I too am searching for an answer for this .
mlndshh said:
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Click to expand...
Click to collapse
HEY..try this...it might work ..and TRY IT AT YOUR OWN RISK!
Use Root Explorer
At the top right hand corner switch from mount r/o to r/w
Go to Systems/build.prop
At the bottom of build.prop text file add this line;
ro.config.vc_call_vol_steps=10
save, mount r/o
Reboot
:good: Hope this works!
Go to Engineer Mode and increase the level.
mlndshh said:
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Click to expand...
Click to collapse
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level but don't set more than 150....otherwise it will damage you're speaker. If you want to changer the speaker sound or Media sound you can do that in here also.
Note: I don't know whether this will work on unrooted phones because I tried this only in my rooted micomax a110.
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level To 155 its Stable im Use That On Many Times Ago
^^ make ur signature pic smaller, or else mods might ban u
srini155 said:
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level but don't set more than 150....otherwise it will damage you're speaker. If you want to changer the speaker sound or Media sound you can do that in here also.
Note: I don't know whether this will work on unrooted phones because I tried this only in my rooted micomax a110.
Click to expand...
Click to collapse
this will not work on unrooted phn..
charlessxavier said:
^^ make ur signature pic smaller, or else mods might ban u
Click to expand...
Click to collapse
This is not Too Much Bigger
Usually modifying the mixerpaths.xml can result in higher volume but I cannot find where to modify the volume in the note 5. Anyone have any success?
Brava27 said:
Usually modifying the mixerpaths.xml can result in higher volume but I cannot find where to modify the volume in the note 5. Anyone have any success?
Click to expand...
Click to collapse
the guy already made a thread for surround sound that makes it louder but he on vaca so when he comes back it will get done.
Brava27 said:
Usually modifying the mixerpaths.xml can result in higher volume but I cannot find where to modify the volume in the note 5. Anyone have any success?
Click to expand...
Click to collapse
system - etc-mixer gain - media speaker 30 and 34 is good
for call speaker scroll down till reach incall speaker raise it 3 or 4 degrees
should reboot device
wish2 said:
system - etc-mixer gain - media speaker 30 and 34 is good
for call speaker scroll down till reach incall speaker raise it 3 or 4 degrees
should reboot device
Click to expand...
Click to collapse
A ha! they moved it to mixergain! Ok thanks man
Has anybody experienced low incoming call volume? It works great on blue-tooth.
Thanks.
I actually have the opposite issue - normal call volume is awesome, but blue tooth call volume is low.
Odorf said:
Has anybody experienced low incoming call volume? It works great on blue-tooth.
Thanks.
Click to expand...
Click to collapse
I agree. This is a serious problem especially when I am using public transport as it becomes really hard to hear the caller most of the time unless I am in a quiet place. I hope this problem as well as the back button blinking issue (appears to be data transmission related on 4G) is also fixed when Android 7 is finally released for ZF3U.
ASUS Pegasus X008. Low in-call volume.
Odorf said:
Has anybody experienced low incoming call volume? It works great on blue-tooth.
Thanks.
Click to expand...
Click to collapse
Got the same problem.
Found two suggestions in Internet:
1. Go Engineer Menu *#*#3646633#*#*
Put all values for sound to max.
2. Downloaded ASUS Madia wizard.
Raise all vales to max.
But in vain. Still the problem persists​.
Please suggest anything, if you have beaten that problem.
Hi! I cannot enter the Engineering Code as mentioned above. Each time I type it at the last symbol it clears the whole code. Is there a different code for the ZF3U? My in-call volume is non existent and I am still trying to find a fix.