Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Mee too low vol
I too am searching for an answer for this .
mlndshh said:
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Click to expand...
Click to collapse
HEY..try this...it might work ..and TRY IT AT YOUR OWN RISK!
Use Root Explorer
At the top right hand corner switch from mount r/o to r/w
Go to Systems/build.prop
At the bottom of build.prop text file add this line;
ro.config.vc_call_vol_steps=10
save, mount r/o
Reboot
:good: Hope this works!
Go to Engineer Mode and increase the level.
mlndshh said:
Flashed stock jellybean (micromax) noticed low volume during calls...any solutions?
going to engineer mode and increasing volume distorts the sound...
Click to expand...
Click to collapse
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level but don't set more than 150....otherwise it will damage you're speaker. If you want to changer the speaker sound or Media sound you can do that in here also.
Note: I don't know whether this will work on unrooted phones because I tried this only in my rooted micomax a110.
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level To 155 its Stable im Use That On Many Times Ago
^^ make ur signature pic smaller, or else mods might ban u
srini155 said:
Just go in to engineer mod by dialing *#*#3646633#*#* and set audio level but don't set more than 150....otherwise it will damage you're speaker. If you want to changer the speaker sound or Media sound you can do that in here also.
Note: I don't know whether this will work on unrooted phones because I tried this only in my rooted micomax a110.
Click to expand...
Click to collapse
this will not work on unrooted phn..
charlessxavier said:
^^ make ur signature pic smaller, or else mods might ban u
Click to expand...
Click to collapse
This is not Too Much Bigger
Related
But seriously, this wasn't an issue before JB. I listen to music at night with my headphones on, to drown out my husband's snoring. Before (I think before the JB update, but not positive), I could put it on a very low volume, and I'd barely hear it. This was great, as it didn't wake me up when a louder song came on.
Since upgrading to JB (again, I think that's when it started), the volume "slider" has specific notches and can no longer be set to any volume along the spectrum. The lowest "notch" is too loud at night and keeps waking me up.
Anybody know of an app or setting or something that would revert this back to a free sliding volume switch, where I could go so low, almost to the point of barely hearing it? I was startled nearly out of my pajamas last night, when Van Morrison screeched something in the middle of a relatively sedate song.
Thanks in advance!
loribuono said:
But seriously, this wasn't an issue before JB. I listen to music at night with my headphones on, to drown out my husband's snoring. Before (I think before the JB update, but not positive), I could put it on a very low volume, and I'd barely hear it. This was great, as it didn't wake me up when a louder song came on.
Since upgrading to JB (again, I think that's when it started), the volume "slider" has specific notches and can no longer be set to any volume along the spectrum. The lowest "notch" is too loud at night and keeps waking me up.
Anybody know of an app or setting or something that would revert this back to a free sliding volume switch, where I could go so low, almost to the point of barely hearing it? I was startled nearly out of my pajamas last night, when Van Morrison screeched something in the middle of a relatively sedate song.
Thanks in advance!
Click to expand...
Click to collapse
if you have CWM installed i can fix that for you..
I haven't noticed a difference in volume since the update, but I never have the volume that low. You could just get headphones with inline volume controls to decrease the volume.
I never even used ics on this tablet so I don't know either..
Sent From Samsung Galaxy Note 10.1 [N8013]
Edit default_gain.conf file .
jje
JJEgan said:
Edit default_gain.conf file .
jje
Click to expand...
Click to collapse
Edit it how? Looking at the file, which is in the system/etc folder for those wondering, it is fairly non-intuative. What would you change to reduce the volume ?
Sent from my GT-N8013 using Tapatalk 2
Via Google .
Or like SGS3 mod .
http://forum.xda-developers.com/showthread.php?t=1826387&highlight=default
Note 10.1 sound .
http://forum.xda-developers.com/showthread.php?t=2002197
jje
txtmikhail said:
if you have CWM installed i can fix that for you..
Click to expand...
Click to collapse
I don't and am not even sure what it is. What would I have to do, and what are the consequences of installing that?
loribuono said:
I don't and am not even sure what it is. What would I have to do, and what are the consequences of installing that?
Click to expand...
Click to collapse
CWM... http://forum.xda-developers.com/showthread.php?t=2080366
CWM lets you install/change things on your tablet that the Company don't normally allow.. I have a sound mod that you could install if you havd cwm installed..
Noozxoide .... http://forum.xda-developers.com/showthread.php?t=2111763
This is a loud/ sound mod i enhanced... you can look at the review video in the link to see how it works.. I notice a big difference when using it and this mod works with any app on your tablet not just music players.. There is a version in the Playstore but doesn't work correct so i enhance it with some mods there is also a Equalizer included to lower or raise volume if needed..
txtmikhail said:
CWM... http://forum.xda-developers.com/showthread.php?t=2080366
CWM lets you install/change things on your tablet that the Company don't normally allow.. I have a sound mod that you could install if you havd cwm installed..
Noozxoide .... http://forum.xda-developers.com/showthread.php?t=2111763
This is a loud/ sound mod i enhanced... you can look at the review video in the link to see how it works.. I notice a big difference when using it and this mod works with any app on your tablet not just music players.. There is a version in the Playstore but doesn't work correct so i enhance it with some mods there is also a Equalizer included to lower or raise volume if needed..
Click to expand...
Click to collapse
And this would allow me to make the minimum volume lower? Everything I've been looking at is all about making things louder.
loribuono said:
And this would allow me to make the minimum volume lower? Everything I've been looking at is all about making things louder.
Click to expand...
Click to collapse
Sorry i read this wrong.. i thought you wanted it louder.. but yes you can still use the equalizer with this and set everything low so the volume will also be lower.. and when you need that extra boost it will be there also...
install the market version and turn down the eq settings might help.. You dont need CWM with this version.. you have to download it because the tablet is incompatible with it in the playstore.. once installed open the app and click on app to open it..
the top option is for your headphones
the middle option is for the tablet speakers
the bottom is for bluetooth
txtmikhail said:
install the market version and turn down the eq settings might help.. You dont need CWM with this version.. you have to download it because the tablet is incompatible with it in the playstore.. once installed open the app and click on app to open it..
the top option is for your headphones
the middle option is for the tablet speakers
the bottom is for bluetooth
Click to expand...
Click to collapse
Thanks for providing this. I installed it and have no idea what to do with it. I know I have to select the first option, but after that I'm lost. And I don't notice any changes in sound with the headphones on, when I change any of these settings. Any idea what I might want to change to get lower minimum volume?
Edit: I selected this as my MusicFX option, under my Sound settings.
loribuono said:
Thanks for providing this. I installed it and have no idea what to do with it. I know I have to select the first option, but after that I'm lost. And I don't notice any changes in sound with the headphones on, when I change any of these settings. Any idea what I might want to change to get lower minimum volume?
Edit: I selected this as my MusicFX option, under my Sound settings.
Click to expand...
Click to collapse
ok click the top option
than scroll down to "deliever balance natural soundstage and premium bass".. check this
now click the eq graph and move the bars down to your likings.. once done click ok..
Edit: best to play music while doing the adjustments so you will notice difference
txtmikhail said:
ok click the top option
than scroll down to "deliever balance natural soundstage and premium bass".. check this
now click the eq graph and move the bars down to your likings.. once done click ok..
Edit: best to play music while doing the adjustments so you will notice difference
Click to expand...
Click to collapse
Got it. Thank you very much!
glad i could help over a month later..lol
Hello.. I want to know how to increase the sound of my Phone.. Actually i did increased the sound of loudspeaker and headset through Engineering mode.. But my inner speaker sound is very low. The one we use during call. How do i increase that volume?
Help will be appreciated.
Sent from my Qmobile Noir A10 using Tapatalk
had the same problem!
mrtaim3 said:
Hello.. I want to know how to increase the sound of my Phone.. Actually i did increased the sound of loudspeaker and headset through Engineering mode.. But my inner speaker sound is very low. The one we use during call. How do i increase that volume?
Help will be appreciated.
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
I was having the same problem...i was even regretting buying the phone because i cant even go out without seeing like 3 missed calls because the sound is so low!
anyway i am not rooted yet so this is how i did it
go to engineer mode by going to your number dialer and entering the following code without quotes
"*#*#3646633#*#*"
Be sure to enter the * and the # correctly.
if you have entered it right then the phone will automaticaly take you to engineer mode.
the fourth option or so will be "Audio"
click on it and then select Loudspeaker mode
at the bottom you should see something like value is 0-140 and below that Max vol. 0-160
change the max volume from whatever it is to 145 or below. you can go to 150 but the sound quality is bad and even if it sounds good dont do it cause it might damage the speaker. Im doing 145 and its perfect.
once you have decided on the number click set and then try calling your phone up
hope that helped.
jaberwockie said:
I was having the same problem...i was even regretting buying the phone because i cant even go out without seeing like 3 missed calls because the sound is so low!
anyway i am not rooted yet so this is how i did it
go to engineer mode by going to your number dialer and entering the following code without quotes
"*#*#3646633#*#*"
Be sure to enter the * and the # correctly.
if you have entered it right then the phone will automaticaly take you to engineer mode.
the fourth option or so will be "Audio"
click on it and then select Loudspeaker mode
at the bottom you should see something like value is 0-140 and below that Max vol. 0-160
change the max volume from whatever it is to 145 or below. you can go to 150 but the sound quality is bad and even if it sounds good dont do it cause it might damage the speaker. Im doing 145 and its perfect.
once you have decided on the number click set and then try calling your phone up
hope that helped.
Click to expand...
Click to collapse
I have mentioned in my post that i have increased the sound... Though loudspeaker sound increased.. But i wanted to increase the upper speaker volume. By which we listen while talking on call.
Sent from my Qmobile Noir A10 using Tapatalk
mrtaim3 said:
I have mentioned in my post that i have increased the sound... Though loudspeaker sound increased.. But i wanted to increase the upper speaker volume. By which we listen while talking on call.
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
Make all 3 Normal, Headset & Loudspeaker
Max Vol. 0~160 = 150
it's safe..
or try This
He is taking about the in call speaker . That is low for me too .
Sent from my GT-I9300 using Tapatalk
ekhasti said:
Make all 3 Normal, Headset & Loudspeaker
Max Vol. 0~160 = 150
it's safe..
or try This
Click to expand...
Click to collapse
Im talking about in call speaker bro..
Sent from my Qmobile Noir A10 using Tapatalk
jaberwockie said:
I was having the same problem...i was even regretting buying the phone because i cant even go out without seeing like 3 missed calls because the sound is so low!
anyway i am not rooted yet so this is how i did it
go to engineer mode by going to your number dialer and entering the following code without quotes
"*#*#3646633#*#*"
Be sure to enter the * and the # correctly.
if you have entered it right then the phone will automaticaly take you to engineer mode.
the fourth option or so will be "Audio"
click on it and then select Loudspeaker mode
at the bottom you should see something like value is 0-140 and below that Max vol. 0-160
change the max volume from whatever it is to 145 or below. you can go to 150 but the sound quality is bad and even if it sounds good dont do it cause it might damage the speaker. Im doing 145 and its perfect.
once you have decided on the number click set and then try calling your phone up
hope that helped.
Click to expand...
Click to collapse
You have nicely guided mate Your first thanx is from my side
But it needs a little modification to help.
mrtaim3 said:
Hello.. I want to know how to increase the sound of my Phone.. Actually i did increased the sound of loudspeaker and headset through Engineering mode.. But my inner speaker sound is very low. The one we use during call. How do i increase that volume?
Help will be appreciated.
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
To increase In Call Volume
You have to go in Engineering mode by this code
"*#*#3646633#*#*"
Then go to Audio & Select Normal Mode
And do as following:
Value is 0 ~ 255 = 108
Max Vol. 0 ~ 160 = 154
Sounds good..gonna try it out soon and report
Sent from my GT-I9500 using Tapatalk 4
Use this app it might help
use android assistant app it might help u . it have voice setting option in app's tools tab. By that u can adjust the voice call volume .
.......................
hit thanks if it helped you
app link below:
https://play.google.com/store/apps/details?id=com.advancedprocessmanager&hl=en
As we all know the volumes on the XZ1C are very low especially the loudspeaker , feels bad when your are on Call or Music with loudspeaker and when the Mic sensitivity is low when the phone is not near the mouth.
I have done some changes in Mixer_Path.xml which helped to increase volumes.
Hope that helps Z1C owners who need only some boost in sounds rather than third party custom sound mods.
Device must be on stock KK rooted and this also may work on XZ1
INSTRUCTIONS:
PLACE THE MIXER_PATHS.XML FILE IN SYSTEM/ETC DIRECTORY WITH 0644(RW-R--R--) PERMISSIONS AND REBOOT
Hit Thanks if you liked it
I'm on lasted Stock KK,Rooted + Odex, but i cannot flash this mod via TWRP.
sinosuke said:
I'm on lasted Stock KK,Rooted + Odex, but i cannot flash this mod via TWRP.
Click to expand...
Click to collapse
Whats the error ? anyways you can place the mixer_path.xml file in system/etc directory with 0644(rw-r--r--) permissions and reboot
This just flash with recovery?
imr.uvce said:
Whats the error ? anyways you can place the mixer_path.xml file in system/etc directory with 0644(rw-r--r--) permissions and reboot
Click to expand...
Click to collapse
Okay,will try
thanks
this is what i need,
thanks a lot,
just copy the xml, set the permission, reboot, and voila
the z1c volume is amplified
:good: :good:
Hi! Would you care to prepare one XML without the loudspeaker's modification? It's distorted on 60% already.
The headphones's volume is much better though, thanks!
myrddral said:
Hi! Would you care to prepare one XML without the loudspeaker's modification? It's distorted on 60% already.
The headphones's volume is much better though, thanks!
Click to expand...
Click to collapse
Speaker section in that XML is what impacts the call loudspeaker and music loudspeaker together.
Let know what you want !!
I tried to go through the xml but I can't find the speaker section to change the values.
All I need is what I said earlier: stock loudspeaker volume, because it is distorted around 60% volume already. Thanks!
myrddral said:
I tried to go through the xml but I can't find the speaker section to change the values.
All I need is what I said earlier: stock loudspeaker volume, because it is distorted around 60% volume already. Thanks!
Click to expand...
Click to collapse
If you want stock, use the stock file in OP .
Noo, I need something inbetween
The headphones are loud enough now, and I like it. I'd want the loudspeaker on stock volumes as it gets distorted. Help is much appreciated
myrddral said:
Noo, I need something inbetween
The headphones are loud enough now, and I like it. I'd want the loudspeaker on stock volumes as it gets distorted. Help is much appreciated
Click to expand...
Click to collapse
check this file ,speaker is reduced a bit.
Better, thanks very much!
Thanks for this, this phone is now perfect, headphone volume is spot on, I don't know if the speaker is a bit to loud though, on full volume the phone is vibrating with the sound and u can actually feel the air being blown out of the speaker grill! In the 2nd file u posted above is the headset volume still the same and just speaker a bit lower?
kxf41 said:
Thanks for this, this phone is now perfect, headphone volume is spot on, I don't know if the speaker is a bit to loud though, on full volume the phone is vibrating with the sound and u can actually feel the air being blown out of the speaker grill! In the 2nd file u posted above is the headset volume still the same and just speaker a bit lower?
Click to expand...
Click to collapse
Yes !! Check the OP updated with even better headset sound,MIC gain and descent loud speaker
imr.uvce said:
Yes !! Check the OP updated with even better headset sound,MIC gain and descent loud speaker
Click to expand...
Click to collapse
great! is the headset a little louder? i felt it could handle a bit more
am new user on android
can you tell me steps to do that
and how can i do 0644(rw-r--r--) permissions
Wondering if it is possible to adjust the sound in speaker on the phone that you put to your ear at.
Think it's too much treble in the sound.
Is there any setting in the phone or must I download some app?
If you're rooted, you can choose to edit the values yourself, or flash a mod...
But that's weird, because the calls sound fine on the stock firmware. Perhaps something to do with the ear piece?
Aditya Srinidhi said:
If you're rooted, you can choose to edit the values yourself, or flash a mod...
But that's weird, because the calls sound fine on the stock firmware. Perhaps something to do with the ear piece?
Click to expand...
Click to collapse
The earpiece work as it is supose to, the problem is that I havet very sensitive hearing. So I need a more smooth sound. That why I need to turn down treble ä.
Ahh, you'll mostly need root access then for changing the volume levels, and if that's not possible I'll suggest a rom which perhaps has that function built in
Requirements:
1. Root
2. X-plore or any other file manager with root access
Procedure:
1. Extract and replace "mixer_paths.xml" in root/system/etc
2. Change the permissions to rw-r--r--
3. Restart your mobile
Note:
I won't be responsible if anything goes wrong.
I'm also providing the stock xml file if you want to revert back to the original settings.
Thanks to AndroPlus for providing custom kernel & recovery for the Z5P Dual.
***Version 2 added with sound from both speakers in speaker mode during a voice call***
Thanks!
As soon as I want to go full volume the music stops. I use music player app with podcast and I let the music play as soon as the aux cable plugs in.
Killastyle said:
As soon as I want to go full volume the music stops. I use music player app with podcast and I let the music play as soon as the aux cable plugs in.
Click to expand...
Click to collapse
I haven't tested it with the aux cable. The in built speaker & the headphones are working fine.
arjun.arora said:
I haven't tested it with the aux cable. The in built speaker & the headphones are working fine.
Click to expand...
Click to collapse
It seems like it goes off automatically because of security? Maybe because the device "thinks" I'm using headphones and it will damage my ears when I set the volume this high. I'm using the aux cable for in my car.
Killastyle said:
It seems like it goes off automatically because of security? Maybe because the device "thinks" I'm using headphones and it will damage my ears when I set the volume this high. I'm using the aux cable for in my car.
Click to expand...
Click to collapse
Yes, maybe so. What happens if you don't turn it up to the full volume, I mean at 90 percent volume.
If I turn it up to 90 there is no problem
Killastyle said:
If I turn it up to 90 there is no problem
Click to expand...
Click to collapse
Great..
@arjun.arora I just compared the original file mixer_paths.xml with your modded mixer_paths.xml, and didn't find any differences.
Can you point out what you edited ?
Best Regard's
Alex1911
Alex1911 said:
@arjun.arora I just compared the original file mixer_paths.xml with your modded mixer_paths.xml, and didn't find any differences.
Can you point out what you edited ?
Best Regard's
Alex1911
Click to expand...
Click to collapse
Hi, I've just increased the volume of the main speaker as well as the headphones.. Kindly try it out and revert back, also backup your original mixer_paths file before replacing it..
arjun.arora said:
Hi, I've just increased the volume of the main speaker as well as the headphones.. Kindly try it out and revert back, also backup your original mixer_paths file before replacing it..
Click to expand...
Click to collapse
i just tested your soundmod, i think the speaker's have a hardware-security-function because at full volume the speaker's are about 2 sec loud and then somehow again a bit more quiet something like a protecting feature, can't say if it is software-limited or hardware-limited.
Best Regard's
Alex1911
Alex1911 said:
i just tested your soundmod, i think the speaker's have a hardware-security-function because at full volume the speaker's are about 2 sec loud and then somehow again a bit more quiet something like a protecting feature, can't say if it is software-limited or hardware-limited.
Best Regard's
Alex1911
Click to expand...
Click to collapse
Send me the stock xml file for the Z5, I'll take a look.
Can you take a screenshot of the settings you changed? That way, people can change them on their own until they find the best setting for their phone and earbuds
Is your Mod is Stereo also for Incoming call ringtones ?
I Mean is Ringtone sound comes from both speaker for incoming Call & Notifications Sound ?
Yes, both speakers play the ringtone. Sound from the bottom speaker is louder than the top one.
Yo bro, hey I'm don't believe, change your sound mod name or else I will report you, my mods are called stereo sound mod for abt 3 years, chose another name pls or else I will report if u wanna check then check.my threada
dontbelive said:
Yo bro, hey I'm don't believe, change your sound mod name or else I will report you, my mods are called stereo sound mod for abt 3 years, chose another name pls or else I will report if u wanna check then check.my threada
Click to expand...
Click to collapse
What? Do you have a patent on the term stereo soundmod. Are you kidding me? This mod is for Xperia Z5P dual. Suggest me an alternative name if you feel insecure or offended.
arjun.arora said:
What? Do you have a patent on the term stereo soundmod. Are you kidding me? This mod is for Xperia Z5P dual. Suggest me an alternative name if you feel insecure or offended.
Click to expand...
Click to collapse
No bcuz I was planning to release a sound mod for z5 line like I did for Z1/Z2/Z3 line, next will be z4 and z5 line. Just change to another name.
What Abt premium sound mod?
Why not use this name.
If not change the name then i will not publish my soundmod here in future.
Hi, will this work on regular Z5 ? I'd like to try it out especially if it increases bottom speaker
Funkmasterchilla said:
Hi, will this work on regular Z5 ? I'd like to try it out especially if it increases bottom speaker
Click to expand...
Click to collapse
Well it should. Do one thing, send me your stock mixer_paths.xml file. I'll edit it.