Database Info

[Q] Minimum volume too high... I know, silly.

But seriously, this wasn't an issue before JB. I listen to music at night with my headphones on, to drown out my husband's snoring. Before (I think before the JB update, but not positive), I could put it on a very low volume, and I'd barely hear it. This was great, as it didn't wake me up when a louder song came on.
Since upgrading to JB (again, I think that's when it started), the volume "slider" has specific notches and can no longer be set to any volume along the spectrum. The lowest "notch" is too loud at night and keeps waking me up.
Anybody know of an app or setting or something that would revert this back to a free sliding volume switch, where I could go so low, almost to the point of barely hearing it? I was startled nearly out of my pajamas last night, when Van Morrison screeched something in the middle of a relatively sedate song.
Thanks in advance!

loribuono said:
But seriously, this wasn't an issue before JB. I listen to music at night with my headphones on, to drown out my husband's snoring. Before (I think before the JB update, but not positive), I could put it on a very low volume, and I'd barely hear it. This was great, as it didn't wake me up when a louder song came on.
Since upgrading to JB (again, I think that's when it started), the volume "slider" has specific notches and can no longer be set to any volume along the spectrum. The lowest "notch" is too loud at night and keeps waking me up.
Anybody know of an app or setting or something that would revert this back to a free sliding volume switch, where I could go so low, almost to the point of barely hearing it? I was startled nearly out of my pajamas last night, when Van Morrison screeched something in the middle of a relatively sedate song.
Thanks in advance!
Click to expand...
Click to collapse
if you have CWM installed i can fix that for you..

I haven't noticed a difference in volume since the update, but I never have the volume that low. You could just get headphones with inline volume controls to decrease the volume.

I never even used ics on this tablet so I don't know either..
Sent From Samsung Galaxy Note 10.1 [N8013]

Edit default_gain.conf file .
jje

JJEgan said:
Edit default_gain.conf file .
jje
Click to expand...
Click to collapse
Edit it how? Looking at the file, which is in the system/etc folder for those wondering, it is fairly non-intuative. What would you change to reduce the volume ?
Sent from my GT-N8013 using Tapatalk 2

Via Google .
Or like SGS3 mod .
http://forum.xda-developers.com/showthread.php?t=1826387&highlight=default
Note 10.1 sound .
http://forum.xda-developers.com/showthread.php?t=2002197
jje

txtmikhail said:
if you have CWM installed i can fix that for you..
Click to expand...
Click to collapse
I don't and am not even sure what it is. What would I have to do, and what are the consequences of installing that?

loribuono said:
I don't and am not even sure what it is. What would I have to do, and what are the consequences of installing that?
Click to expand...
Click to collapse
CWM... http://forum.xda-developers.com/showthread.php?t=2080366
CWM lets you install/change things on your tablet that the Company don't normally allow.. I have a sound mod that you could install if you havd cwm installed..
Noozxoide .... http://forum.xda-developers.com/showthread.php?t=2111763
This is a loud/ sound mod i enhanced... you can look at the review video in the link to see how it works.. I notice a big difference when using it and this mod works with any app on your tablet not just music players.. There is a version in the Playstore but doesn't work correct so i enhance it with some mods there is also a Equalizer included to lower or raise volume if needed..

txtmikhail said:
CWM... http://forum.xda-developers.com/showthread.php?t=2080366
CWM lets you install/change things on your tablet that the Company don't normally allow.. I have a sound mod that you could install if you havd cwm installed..
Noozxoide .... http://forum.xda-developers.com/showthread.php?t=2111763
This is a loud/ sound mod i enhanced... you can look at the review video in the link to see how it works.. I notice a big difference when using it and this mod works with any app on your tablet not just music players.. There is a version in the Playstore but doesn't work correct so i enhance it with some mods there is also a Equalizer included to lower or raise volume if needed..
Click to expand...
Click to collapse
And this would allow me to make the minimum volume lower? Everything I've been looking at is all about making things louder.

loribuono said:
And this would allow me to make the minimum volume lower? Everything I've been looking at is all about making things louder.
Click to expand...
Click to collapse
Sorry i read this wrong.. i thought you wanted it louder.. but yes you can still use the equalizer with this and set everything low so the volume will also be lower.. and when you need that extra boost it will be there also...

install the market version and turn down the eq settings might help.. You dont need CWM with this version.. you have to download it because the tablet is incompatible with it in the playstore.. once installed open the app and click on app to open it..
the top option is for your headphones
the middle option is for the tablet speakers
the bottom is for bluetooth

txtmikhail said:
install the market version and turn down the eq settings might help.. You dont need CWM with this version.. you have to download it because the tablet is incompatible with it in the playstore.. once installed open the app and click on app to open it..
the top option is for your headphones
the middle option is for the tablet speakers
the bottom is for bluetooth
Click to expand...
Click to collapse
Thanks for providing this. I installed it and have no idea what to do with it. I know I have to select the first option, but after that I'm lost. And I don't notice any changes in sound with the headphones on, when I change any of these settings. Any idea what I might want to change to get lower minimum volume?
Edit: I selected this as my MusicFX option, under my Sound settings.

loribuono said:
Thanks for providing this. I installed it and have no idea what to do with it. I know I have to select the first option, but after that I'm lost. And I don't notice any changes in sound with the headphones on, when I change any of these settings. Any idea what I might want to change to get lower minimum volume?
Edit: I selected this as my MusicFX option, under my Sound settings.
Click to expand...
Click to collapse
ok click the top option
than scroll down to "deliever balance natural soundstage and premium bass".. check this
now click the eq graph and move the bars down to your likings.. once done click ok..
Edit: best to play music while doing the adjustments so you will notice difference

txtmikhail said:
ok click the top option
than scroll down to "deliever balance natural soundstage and premium bass".. check this
now click the eq graph and move the bars down to your likings.. once done click ok..
Edit: best to play music while doing the adjustments so you will notice difference
Click to expand...
Click to collapse
Got it. Thank you very much!

glad i could help over a month later..lol

Adjust the sound?

Wondering if it is possible to adjust the sound in speaker on the phone that you put to your ear at.
Think it's too much treble in the sound.
Is there any setting in the phone or must I download some app?

If you're rooted, you can choose to edit the values yourself, or flash a mod...
But that's weird, because the calls sound fine on the stock firmware. Perhaps something to do with the ear piece?

Aditya Srinidhi said:
If you're rooted, you can choose to edit the values yourself, or flash a mod...
But that's weird, because the calls sound fine on the stock firmware. Perhaps something to do with the ear piece?
Click to expand...
Click to collapse
The earpiece work as it is supose to, the problem is that I havet very sensitive hearing. So I need a more smooth sound. That why I need to turn down treble ä.

Ahh, you'll mostly need root access then for changing the volume levels, and if that's not possible I'll suggest a rom which perhaps has that function built in

Nougat [32.4.A.0.160] [.33] Stereo Soundmod [Volume/Headphones Boost] - Xperia Z5P

Requirements:
1. Root
2. X-plore or any other file manager with root access
Procedure:
1. Extract and replace "mixer_paths.xml" in root/system/etc
2. Change the permissions to rw-r--r--
3. Restart your mobile
Note:
I won't be responsible if anything goes wrong.
I'm also providing the stock xml file if you want to revert back to the original settings.
Thanks to AndroPlus for providing custom kernel & recovery for the Z5P Dual.
***Version 2 added with sound from both speakers in speaker mode during a voice call***​

Thanks!

As soon as I want to go full volume the music stops. I use music player app with podcast and I let the music play as soon as the aux cable plugs in.

Killastyle said:
As soon as I want to go full volume the music stops. I use music player app with podcast and I let the music play as soon as the aux cable plugs in.
Click to expand...
Click to collapse
I haven't tested it with the aux cable. The in built speaker & the headphones are working fine.

arjun.arora said:
I haven't tested it with the aux cable. The in built speaker & the headphones are working fine.
Click to expand...
Click to collapse
It seems like it goes off automatically because of security? Maybe because the device "thinks" I'm using headphones and it will damage my ears when I set the volume this high. I'm using the aux cable for in my car.

Killastyle said:
It seems like it goes off automatically because of security? Maybe because the device "thinks" I'm using headphones and it will damage my ears when I set the volume this high. I'm using the aux cable for in my car.
Click to expand...
Click to collapse
Yes, maybe so. What happens if you don't turn it up to the full volume, I mean at 90 percent volume.

If I turn it up to 90 there is no problem

Killastyle said:
If I turn it up to 90 there is no problem
Click to expand...
Click to collapse
Great..

@arjun.arora I just compared the original file mixer_paths.xml with your modded mixer_paths.xml, and didn't find any differences.
Can you point out what you edited ?
Best Regard's
Alex1911

Alex1911 said:
@arjun.arora I just compared the original file mixer_paths.xml with your modded mixer_paths.xml, and didn't find any differences.
Can you point out what you edited ?
Best Regard's
Alex1911
Click to expand...
Click to collapse
Hi, I've just increased the volume of the main speaker as well as the headphones.. Kindly try it out and revert back, also backup your original mixer_paths file before replacing it..

arjun.arora said:
Hi, I've just increased the volume of the main speaker as well as the headphones.. Kindly try it out and revert back, also backup your original mixer_paths file before replacing it..
Click to expand...
Click to collapse
i just tested your soundmod, i think the speaker's have a hardware-security-function because at full volume the speaker's are about 2 sec loud and then somehow again a bit more quiet something like a protecting feature, can't say if it is software-limited or hardware-limited.
Best Regard's
Alex1911

Alex1911 said:
i just tested your soundmod, i think the speaker's have a hardware-security-function because at full volume the speaker's are about 2 sec loud and then somehow again a bit more quiet something like a protecting feature, can't say if it is software-limited or hardware-limited.
Best Regard's
Alex1911
Click to expand...
Click to collapse
Send me the stock xml file for the Z5, I'll take a look.

Can you take a screenshot of the settings you changed? That way, people can change them on their own until they find the best setting for their phone and earbuds

Is your Mod is Stereo also for Incoming call ringtones ?
I Mean is Ringtone sound comes from both speaker for incoming Call & Notifications Sound ?

Yes, both speakers play the ringtone. Sound from the bottom speaker is louder than the top one.

Yo bro, hey I'm don't believe, change your sound mod name or else I will report you, my mods are called stereo sound mod for abt 3 years, chose another name pls or else I will report if u wanna check then check.my threada

dontbelive said:
Yo bro, hey I'm don't believe, change your sound mod name or else I will report you, my mods are called stereo sound mod for abt 3 years, chose another name pls or else I will report if u wanna check then check.my threada
Click to expand...
Click to collapse
What? Do you have a patent on the term stereo soundmod. Are you kidding me? This mod is for Xperia Z5P dual. Suggest me an alternative name if you feel insecure or offended.

arjun.arora said:
What? Do you have a patent on the term stereo soundmod. Are you kidding me? This mod is for Xperia Z5P dual. Suggest me an alternative name if you feel insecure or offended.
Click to expand...
Click to collapse
No bcuz I was planning to release a sound mod for z5 line like I did for Z1/Z2/Z3 line, next will be z4 and z5 line. Just change to another name.
What Abt premium sound mod?
Why not use this name.
If not change the name then i will not publish my soundmod here in future.

Hi, will this work on regular Z5 ? I'd like to try it out especially if it increases bottom speaker

Funkmasterchilla said:
Hi, will this work on regular Z5 ? I'd like to try it out especially if it increases bottom speaker
Click to expand...
Click to collapse
Well it should. Do one thing, send me your stock mixer_paths.xml file. I'll edit it.

[ROOT][MOD] Xperia X Performance Volume Boost for stock config

What's bugging me about my brand new Xperia X? The overall low volume.
These simple tweaks, this mod if you may, simply modifies a few lines from the stock audio config files which, after a reboot make your speakers louder and headphones, a bit too loud (but I didn't hear anyone complaining about Xperias for being too loud lol)!
It's for rooted users only and for me it sounds a lot better than using (possibly) unstable sound mods instead of simply adjusting the volume on some pretty decent stock drivers.
***Tested on X Performance running Nougat. I've also got my hands on Xperia X Performance files which are pretty straight FWD see attach. Thanks @bkk99213 for testing and for the file!***​​​
Make a backup first or if you didn't simply put the original values back (82 for speaker lines and 76 for headphones). All that can happen if you modify the wrong thing is: Your settings won't do anything or you'll have no sound, that's why a backup is ideal.
Features:
Louder Stereo Speaker sound system wide;
Louder Headphone sound;
Stereo Voice-Speaker call - NOT TESTED! Keep a backup and please let me know if it's working;
Customizable as you see fit! Just stick to the already explored options.
Conflict-free tweaks - no additional files added, no nothing, just some modified lines - you can trust it .
Installation:
By flashing the .zip on recovery or with FLASHFIRE [press the red "+" button > Flash ZIP or OTA > leave the options as they are and Click on the "done arrow thingy".
Manually copying the file to /etc - DO NOT forget to set the right permissions (RW R R). Please take a look over the Permissions.png screenshot in case you don't know how to set them - you long click on the file, then go to properties and you'll see the permissions button.
Do it yourself - there's a guide down bellow.
In the download section you'll find:
>>Flashable! already modified "Xperia X P Getting Loud.zip" with: SPEAKER values - 84 for both RX7/RX8 and HEADPHONE values - 84 for RX1/RX2.
>>Flashable! Stock Values - it's the stock file unmodified.
>>NON-Flashable! zips - there you have 1 zip for the modified file and the stock one so you can place it manually via ES file explorer or the explorer of your choosing.
**And some screenshots that are pretty self explanatory showing you what modifications need to be made if you want to do it yourself.
DIY Guide (using ES File Explorer):
You're probably acquainted with ES File Explorer so it should be pretty simple. The modifications I made were done with ES (it has an built-in editor).
1. Make sure the Root Explorer toggle is On - it's located in the Tools tab as you swipe the left side of the screen;
2. Go to the root of the files where you'll see folders such as "data; dev; firmware; storage; system; etc" go to "etc" folder and scroll down till you see the mixer_paths files;
3. Open "mixer_paths_tasha" and at the prompt, select ES Note Editor - it's a huge file so tap right above the navigation bar! A bar with percentage should show up - it will help you navigate through the file;
4.1 Speakers - Get to 45% of the file where you should see the path for "speaker", ctrl name RX7 and RX8 with their stock values - modify the values as you please but please don't go over 85 - sound will be too distorted;
4.2 Headphones - Go to 57% of the file - you'll see "headphones" path - ctrl name RX1 and RX2 - modify the values but anything more than 84 might be too much.
5. Save and reboot. If you choose to modify the files on a PC make sure to set the permissions when you put the file back. Otherwise bootloops might occur.
*Stereo Voice-Speaker call is untested but in theory it should work, as it does on my Xperia X. I added the second channel to the routing - screenshot bellow.
**Stereo Ringtone-Speaker - WIP. I'm currently stuck so feel free to jump in and notify me via PM.
***Internal players such as Music, Video, ringing and notification will try to compensate the sound so it might not be as loud as expected. But try a youtube video and you'll notice the difference.
***Do not attempt to modify something else unless you know what you're doing - on that note, make a backup first. In my first attempts I lost sound device wide with FC for sound effects apk.
***Do not go over the values I imputed (84 for speaker and 85 for headphone) - apart from the distortions that will occur because of the louder volume the internal DAC might not be able to reproduce the sound at such intensity - in my tests one of the speakers was shutting down. Again, no harm can come to your device but don't push it.
***I saw a lot of sections for hi-res headphones, Noise cancelling, etc - I did not explore those options because I don't have the means to test it. Any input and contributions from you guys are most welcome.
These files control the volume output for digital / analog which means it's a non-intrusive way to change volumes with no harm for the device. If volume limit exceeds the capacity of the speakers it will sound bad but there is no chance for physical damage.
I'm coming from a highly modded Xperia Z (that phone saw some torture) which made use of the earpiece speaker for stereo, and even if the speakers aren't designed for that output they are louder than the X which packs pretty decent speakers. This is the mod that gave me the idea: http://forum.xda-developers.com/xperia-z/themes-apps/mod-stereomod-xz-v1-1-t2835995
Click to expand...
Click to collapse
Also check this out. It's an xposed module that will disable the annoying thermal warning for the camera. No more functions disabled just because phone got a bit over skin temperature lol. http://forum.xda-developers.com/cro...-camera-xperia-thermal-disabler-v1-0-t3455087
Cheers and happy new year!

Cannot find 9335
In Xperia X Performance @7.0nougat
I can't find the file in etc folder.

bkk99213 said:
In Xperia X Performance @7.0nougat
I can't find the file in etc folder.
Click to expand...
Click to collapse
Yes that's why it's a guide-ish. Files are different still... Traditionally with Sony, you should aim for the largest file. In your case the right file should be "...tasha" file. If you want you can send it to me or try it yourself. Keep a backup. I had no bootloops (so there's nothing to fear) by modifying what I shouldn't (and i had a dozen of tries). All that can happen if you modify the wrong thing is: Your settings won't do anything or you'll have no sound, that's why a backup is ideal. PM me. I'm curious about the file and results.

Sebi673 said:
Yes that's why it's a guide-ish. Files are different still... Traditionally with Sony, you should aim for the largest file. In your case the right file should be "...tasha" file. If you want you can send it to me or try it yourself. Keep a backup. I had no bootloops (so there's nothing to fear) by modifying what I shouldn't (and i had a dozen of tries). All that can happen if you modify the wrong thing is: Your settings won't do anything or you'll have no sound, that's why a backup is ideal. PM me. I'm curious about the file and results.
Click to expand...
Click to collapse
Here you go and thanks a lot. I know mi 4i can use same method to make the sound loudly. So I also interest your GUIDE
But PM cannot attach file. So I use REPLY..:laugh:

bkk99213 said:
Here you go and thanks a lot. I know mi 4i can use same method to make the sound loudly. So I also interest your GUIDE
But PM cannot attach file. So I use REPLY..:laugh:
Click to expand...
Click to collapse
It's simpler than it was on my X. I'll be back with an update. But I need my coffee first ))

Tested. It work. Whatsapp's Ringtone is obviously but some notification sound get distorted.
So I don't know the setting(84) is correct or not.

bkk99213 said:
Tested. It work. Whatsapp's Ringtone is obviously but some notification sound get distorted.
So I don't know the setting(84) is correct or not.
Click to expand...
Click to collapse
That's device specific. On my X 84 is just the right amount. I'll make another zip with 83 values. That's only one step over stock.
At least headphones are loud and distortion free. I noticed some good amplification on those. On my old Xperia Z I could never have such a powerful sound without signal cutting off on one of the channels.
Correction. The file had 85 for speakers. I'll put new zips with 84 soon.
---Files Updated---

Sebi673 said:
That's device specific. On my X 84 is just the right amount. I'll make another zip with 83 values. That's only one step over stock.
At least headphones are loud and distortion free. I noticed some good amplification on those. On my old Xperia Z I could never have such a powerful sound without signal cutting off on one of the channels.
Correction. The file had 85 for speakers. I'll put new zips with 84 soon.
---Files Updated---
Click to expand...
Click to collapse
84.perfect.:good::good::good:

bkk99213 said:
84.perfect.:good::good::good:
Click to expand...
Click to collapse
So glad I was able to help. You're welcome!

After tested 5 days, I get some trouble that my phone call's volume is lower than before.
But the settings should be no change for phone call, right?
* I have not much phone call, so I can't find this problem @ 1st day.
Thanks for your help again.

Does anyone know which xml would need to be modified for this to work on the X Compact?

agentsmith988 said:
Does anyone know which xml would need to be modified for this to work on the X Compact?
Click to expand...
Click to collapse
It's usually the largest one. So you should look for that. And then adapt this method to the X. Speakers might be with a different name buy you'll get it
Sent from my Xperia X using XDA Labs

Sebi673 said:
It's usually the largest one. So you should look for that. And then adapt this method to the X. Speakers might be with a different name buy you'll get it
Sent from my Xperia X using XDA Labs
Click to expand...
Click to collapse
Looks like it's mixer_paths_wcd9335.xml at 148.6KB. Both RX7 and RX8 are at 82 stock (under path name="wsa-speaker"). How much past the original values are you pushing these things, 2-3? Do these values boost the in-call speakerphone volume as well?
Unrelated, does anyone know if this XML has anything that could be modified to get get both speakers working when using the in-call speakerphone?

agentsmith988 said:
Looks like it's mixer_paths_wcd9335.xml at 148.6KB. Both RX7 and RX8 are at 82 stock (under path name="wsa-speaker"). How much past the original values are you pushing these things, 2-3? Do these values boost the in-call speakerphone volume as well?
Unrelated, does anyone know if this XML has anything that could be modified to get get both speakers working when using the in-call speakerphone?
Click to expand...
Click to collapse
I am pretty sure both X and X compact use the same HW - it seems to be the same file and wsa thingy - check my thread for X - https://forum.xda-developers.com/xperia-x/themes/xperia-x-mixerpaths-volume-tweaks-tank-t3525691
it is possible to modify the call speaker - and there are more things to add like stereo for that one. But going over default for one speaker can get voice distorted. And if stereo is applied there, than microphone quality will drop a lot. There's a reason why the call speaker is mono - so that the mic on the other side can catch most of the sounds. At some point maybe I'll look for a hook for stereo.

bkk99213 said:
After tested 5 days, I get some trouble that my phone call's volume is lower than before.
But the settings should be no change for phone call, right?
* I have not much phone call, so I can't find this problem @ 1st day.
Thanks for your help again.
Click to expand...
Click to collapse
These modifications can't affect the phone call volume since I never touched those. And I never had such issues. But I'll keep my ear close to it )

Sebi673 said:
I am pretty sure both X and X compact use the same HW - it seems to be the same file and wsa thingy - check my thread for X - https://forum.xda-developers.com/xperia-x/themes/xperia-x-mixerpaths-volume-tweaks-tank-t3525691
it is possible to modify the call speaker - and there are more things to add like stereo for that one. But going over default for one speaker can get voice distorted. And if stereo is applied there, than microphone quality will drop a lot. There's a reason why the call speaker is mono - so that the mic on the other side can catch most of the sounds. At some point maybe I'll look for a hook for stereo.
Click to expand...
Click to collapse
Awesome! Bumped the speaker and headphone values up to 86 and 85 and all I can say is wow! Made a huge difference!
Do you know which lines specifically control the in-call speaker volume? Makes sense about the mono audio/mic pick-up, however it'd be great to at least increase the volume.

agentsmith988 said:
Awesome! Bumped the speaker and headphone values up to 86 and 85 and all I can say is wow! Made a huge difference!
Do you know which lines specifically control the in-call speaker volume? Makes sense about the mono audio/mic pick-up, however it'd be great to at least increase the volume.
Click to expand...
Click to collapse
Adding stereo speaker to phone call is a bit tricky as far as I remember, especially without a recovery. Hopefully I'll have some spare time to look over it or at least identify call routing.
Sent from my Xperia X using XDA Labs

Sebi673 said:
Adding stereo speaker to phone call is a bit tricky as far as I remember, especially without a recovery. Hopefully I'll have some spare time to look over it or at least identify call routing.
Sent from my Xperia X using XDA Labs
Click to expand...
Click to collapse
Would it be easier to just increase the in-call volume and leave it mono? I'm guessing that there is a similar RX line that can be bumped up a few values to increase the volume.
Under <path name="voice-speaker"> there is a line <ctl name="RX8 Digital Volume" value="82" />. I'm guessing that may be it?

agentsmith988 said:
Would it be easier to just increase the in-call volume and leave it mono? I'm guessing that there is a similar RX line that can be bumped up a few values to increase the volume.
Under <path name="voice-speaker"> there is a line <ctl name="RX8 Digital Volume" value="82" />. I'm guessing that may be it?
Click to expand...
Click to collapse
yup, that should be it. I'm advocating for the stereo because stock values already distort a lot on speaker call
[Update] - stereo call speaker now working. Testing and applying method for ringtone speaker aswell

agentsmith988 said:
Would it be easier to just increase the in-call volume and leave it mono? I'm guessing that there is a similar RX line that can be bumped up a few values to increase the volume.
Under <path name="voice-speaker"> there is a line <ctl name="RX8 Digital Volume" value="82" />. I'm guessing that may be it?
Click to expand...
Click to collapse
[UPDATE] Please check the updated thread for Xperia X. For you, modifications should be easier to learn from there. Stereo Voice-Speaker added - no need for volume boost. https://forum.xda-developers.com/xperia-x/themes/xperia-x-mixerpaths-volume-tweaks-tank-t3525691

Volume hack for Android 6.0.1

So I was a little upset with the volumes this phone speaker gives out. I could barely hear my text messages and so on. That being said I figured I would go in and tweak the stock base Android roms Mixerpath to make the phone louder. To success I got it to work and wanted to share with everyone else.
IMPORTANT: You do at your own risk. No one is responsible for anything but you. That being said make sure you back up or save a copy of the Mixerpath before replacing it with my version.
P.s. if you want louder let me know I'll make a copy for you I put everything to 130 instead of stock 108 to 114 settings so I receive what I want without distorting the speaker sound.
Steps to install: just copy and paste to system/etc and replace mixerpath.htl that is there. Make sure to set permission to rw-r-r-. Restart your phone and enjoy louder speaker. Just fyi I use es file explorer.
Required samsung 6.0.1 stock rom. Might work on other 6.0.1 roms
Download link:
mixer_paths.xml
https://drive.google.com/file/d/0B5ydYA73l-HFdGQ5Q3E5R2F3eVU/view?usp=drivesdk
If you enjoy don't forget to hit the thanks button

josh2020glacier said:
So I was a little upset with the volumes this phone speaker gives out. .
Click to expand...
Click to collapse
Hey @Josh is there a way you can do this for other volumes such as Bluetooth headset, wired headphones.

DJBoxer said:
Hey @Josh is there a way you can do this for other volumes such as Bluetooth headset, wired headphones.
Click to expand...
Click to collapse
Sorry I broke my android went to Apple but I'm back now. Do you still need that volume hack?

josh2020glacier said:
Sorry I broke my android went to Apple but I'm back now. Do you still need that volume hack?
Click to expand...
Click to collapse
Thanks Josh, for reply. I managed to get V4A working with magisk v14. Where as before any module would just crash device after few minutes.
Even though I no longer need hack. Maybe someone else might be interested but. Thanks for replying.