Database Info

[CWM][CWM Based Recovery for Micromax A54]

CWM Based recovery for Micromax A54
DOWNLOAD
Click to expand...
Click to collapse
STEPS TO INSTALL: (PC)
1.Download the recovery from above..
2.Extract the files in somewhere
3.Now open recover.bat file
4.And follow the instructions on screen to flash recoery
5.You are done...
Click to expand...
Click to collapse
STEPS TO INSTALL: (Via phone)
1.Downlaod recovery manager.apk
2.Copy the recovery.img from zip and paste it on sdcard
3.Open recovery manager.apk
4. Click on recovery Tab
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. you have installed now...
How to use recovery:
Key functions:
Vol - = scroll..
Power button= ok
Click to expand...
Click to collapse
Download DDMS software for pc..
1.connect your phone to pc..
2.now open the sofware downloaded
3.Your phone screen will be visible on DDMS on pc..
4.Before using recovery U must Scroll using vol - untill you see the message "Back button is enabled"
5.Now use recovery..
Credits:
0.Dhinesh kumar (me for porting)
1.Sahil deep
2.Hardy Ahir
3.Sagnik Bhattacharya (Tester)
4.Sandeep Kumar (Tester)
Click to expand...
Click to collapse
Wanna more follow us at facebook group
Click to expand...
Click to collapse

Reserved

Resrved

One more post to park my bike

dhinesh77 said:
CWM Based recovery for Micromax A54
STEPS TO INSTALL: (PC)
STEPS TO INSTALL: (Via phone)
1.Downlaod recovery manager.apk
2.Copy the recovery.img from zip and paste it on sdcard
3.Open recovery manager.apk
4. Click on recovery Tab
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. you have installed now...
How to use recovery:
Download DDMS software for pc..
1.connect your phone to pc
2.now open the sofware downloaded
3.Your phone screen will be visible on DDMS on pc..
4.Scroll untill you see the message "Back button is enabled"
5.Now use recovery..
Click to expand...
Click to collapse
good work
-Sahil Deep
Press Thanks Button

sahil11 said:
good work
-Sahil Deep
Press Thanks Button
Click to expand...
Click to collapse
Thank you dear friend

Pls include the FB group link
Good work man!! You rock...!!

dhinesh77 said:
CWM Based recovery for Micromax A54
STEPS TO INSTALL: (PC)
STEPS TO INSTALL: (Via phone)
1.Downlaod recovery manager.apk
2.Copy the recovery.img from zip and paste it on sdcard
3.Open recovery manager.apk
4. Click on recovery Tab
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. you have installed now...
How to use recovery:
Download DDMS software for pc..
1.connect your phone to pc
2.now open the sofware downloaded
3.Your phone screen will be visible on DDMS on pc..
4.Scroll untill you see the message "Back button is enabled"
5.Now use recovery..
Click to expand...
Click to collapse
Good Work Dear you Rock again
Thanks
Hardy

jyothisthaliath said:
Pls include the FB group link
Good work man!! You rock...!!
Click to expand...
Click to collapse
Oh! forgot to provide the link..Thanks for remembering me,,,,

How to boot into recovery?
That DDMS software that you mentioned just shows my phone's screen. As you said to scroll what does that mean?

fuser1337 said:
How to boot into recovery?
That DDMS software that you mentioned just shows my phone's screen. As you said to scroll what does that mean?
Click to expand...
Click to collapse
Use vol - to scroll ,,,,

Jyothis,Hardy ahir,Sahil deep Thanks to all

Where can I find the source of that recovery?
The micromax A54 is similar to my Blu Dash 3.5 and am trying to compile cwm recovery.

erickreisbr said:
Where can I find the source of that recovery?
The micromax A54 is similar to my Blu Dash 3.5 and am trying to compile cwm recovery.
Click to expand...
Click to collapse
may i know whats your device name in fastboot mode and as well as in normal mode,,between have you tried this recovery..

dhinesh77 said:
may i know whats your device name in fastboot mode and as well as in normal mode,,between have you tried this recovery..
Click to expand...
Click to collapse
In normal mode is 1234567890ABCDEF and MSM7625ASKU3 in fastboot mode.

Fast Boot mode
Download the fastboot binary here. Boot your device into fastboot by pressing the key combination for your device. (Google 'your_device_name key combination enter fastboot mode' to know the key combination for your device or ask someone at xda in your device's section. Generally, it is power up + camera button. Whatever the key combination is, first switch off the device, then press those keys simultaneously till the screen lits up.) :good: :highfive:

can you add an update
can you add an update for cwm of mmx a 54
and the update is install milti rom in sd card

[GT-S7500][Everything]Root+cwm+Init.d support+custom kernel for Galaxy Ace Plus S7500

Rooting GT-S7500+Busybox+Init.d support+custom kernel​
Hello friends!I am back!Today I will show a new way to root our samsung galaxy ace plus!And If you want a custom Kernel!!!
Before we start,please check carefully this requirements.
Requirements :
Odin3 Flash Program
CWM Package
SuperSU/superuser Package
BusyBox.zip
Windows PC
GT-S7500 ONLY
Pre-Requisites:
Don't forget to install drivers before doing anything
Make Sure you have GT-S7500 only and no other variant.
And sure you have to Enable USB Debbuging from settings=>Applications=>Developement
Don't forget,I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR PHONE so don't be noob and follow me carefully.
Now we have to flash cwm before rooting:
CWM Procedure:
Download all the things Mentioned Above
Extract Odin3.zip
Extract cwm-trebon.zip and place it inside Odin3 folder
Copy SuperSUx.xx.zip and Busybox.zip to the External SD of your Phone
Now Open Odin3 v1.85.exe
Check Auto Reboot, F. Reset Time & PDA only
Uncheck everything that is not mentioned above Like Repartion must be UNCHECKED
Now Click on PDA and select cwm-trebon.tar.md5
Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
Now Press Volume Up to Continue
Now the Phone is Ready to be connected to PC
Connect your Phone to PC
Odin3 will detect your Phone and The Box will turn yellow
Now Recheck whether every thing mentioned above is done or not
Now hit Start Button to begin Flashing
After flashing is done the phone will reboot
Now the CWM is installed
Now follow Rooting Procedure.
Rooting + BusyBox Procedure:
Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
Now in CWM navigate to Install Zip From SDcard using Volume Keys
Now Select Choose Zip from SDcard by pressing Home Key
Now select SuperSU-v1.25.zip
Select Yes to Install
Now repeat the same thing but now select BusyBox.zip package instead of the SuperSu package
Select Yes to Install
After Install is done Reboot Your Phone By Pressing Reboot System Now
Now you are Rooted with Init.d Support!!
Thats IT!!!Now you can make tricks with your friends using your rooted SGAP.
Now If you want to flash a Custom Kernel,just do this:
Download zip file and copy to sdcard(update-kernel-trebon.zip)
Flash zip from CWM recovery and reboot
Download BLN app from PlayStore&activate it to control BLN
This custom Kernel will add to your phone:
Overclocked to 1.23 GHz
Governors: Smartass2,Savagedzen,Pegasusq
I/O Schedulers
BLN support
Frandom entropy generator
ZRAM(64 MB)
Init.d support
Custom boot logo
Press Thanks If I helped YOU!
Enjoy

this. guide is already available I think......

Nooo
trendchanger said:
this. guide is already available I think......
Click to expand...
Click to collapse
No bro but i picked just some ideas from other threads so don't say this...

trendchanger said:
this. guide is already available I think......
Click to expand...
Click to collapse
And by the way i didnt steal the work of another member i just make a look and make another thing special and More Good.

[RECOVERY][UNOFFICIAL][GT-I9060][GRAND NEO] CWM Version 6.0.5.1

Note: THIS WILL VOID YOUR WARRANTY!!! No one but yourself is responsible for what you do to your device. USE AT YOUR OWN RISK!!!
People to Thank:
koush - for his awesome recovery.:good:
CyanogenMod - for their repos.:victory:
Samsung - for the device
Issues:
None found yet:angel:​
How to install with Odin:
1. Disconnect your phone from your computer
2. Start Odin3-vX.X.exe
3. Click the PDA button, and select recovery.tar
4. Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot (if it asks you to press VolUp button to continue, press the button, or run adb reboot download command)
5. Connect the phone to your computer
6. Make sure Repartition is NOT checked
7. Click the Start button
9. Wait for Android to boot
10. Done!!!
If you already have some custom recovery:
Put the zip on your phone or sdcard and flash it as usual.
Enjoy!!:good:

The perfectly working recovery..! At last a stable CWM is available..!

Soul_reaper121 said:
The perfectly working recovery..! At last a stable CWM is available..!
Click to expand...
Click to collapse
thanks buddy..just take it for a ride..and test everything lol..report if find anything broken

Does it support external memory card acess and backup
Sent from my SM-G7102

manan001 said:
Does it support external memory card acess and backup
Sent from my SM-G7102
Click to expand...
Click to collapse
Yes it does. I just made a backup on my external SD card. You might find it named as storage/sdcard1. Good Luck.

manan001 said:
Does it support external memory card acess and backup
Sent from my SM-G7102
Click to expand...
Click to collapse
Yeah it does bro..everything works..no bug what so ever

Hi. Will this work on GT-I9060I? Thanks.

Is working too on Grand Neo Plus? (GT-I9060I)?

Hello i want to ask do i need to unlock bootloader first? Because i dont find any post how to unlock it

HELP
Well guys, i went from a forum to this site and i dowloaded odin, though i see no PDA button (guessed it is the ap) and when i connected my device to my pc in the STOCK samsung recovery mode windows didnt recognized it, odin didnt too, so what i am supposed to do?

Can we use it without Pc? if yes! Then how?

Samsung Galaxy grand néo plus

sggff

Tooop

hi

مااقدر ا

شكرن

Good

HELP!! In ODIN, I am unable to select the AP file. Whenever I click on the AP button to select the recovery image that I have downloaded, it does not recognise the recovery file. The file selection window is blank. Please help....

[UNBRICK][ACER][A1-830]Guide on how to unbrick this thing (ALL STOCK ROM FILES HERE)

Seems like some of us have been trying to get out of the bootloop. Well, I posted a video about it (here) and most people in the comments have not been able to solve their issue due to the "magi" or what ever issue, but don't worry! I'm here to help! I will post all of the firmwares and how to flash them, so keep reading!
Kitkat (4.4.2) firmwares
- IMG- FLASHABLE BY FASTBOOT
- ZIP - FLASHABLE BY RECOVERY
JellyBean (4.2.2)
- IMG - FLASHABLE BY FASTBOOT
- ZIP - FLASHABLE BY RECOVERY
INSTRUCTIONS:
For flashable zips, download the zip file for the Android version you want and put it on a Micro SD Card. No, usb OTG won't work because the tablet looks in the "/mnt/sdcard" directory and there ain't no OTG capabilities there. Switch of the tablet and put the SD Card in. Boot into recovery by holding the power button and volume up. In the recovery, use the volume buttons to select and the power button to confirm. Select "wipe data/factory reset" and hit the power button and wait. This might take a while. Once it's done, select the "wipe cache" option, note, you tablet might reboot or do some other stuff, just ignore whatever it does and continue. Now, just hit update via external storage and select the zip file and hit the power button. Make sure you don't rename the zip file, otherwise you're going to get a signature verification error. Wait for it to complete and then wipe the data/factory reset again and reboot into system!
Common errors
You get an error that doesn't let you through the updating process:
To fix this, choose another firmware zip file and update (or perhaps downgrade) to that instead. After that, you repeat the steps but with your desired firmware.
You get an error while updating, but the update still continues
This won't affect anything Just ignore and continue following the steps.
-----------------------------------------------------------------------------------------
For img's, download and install the desired img file you want. Make sure you got adb and fastboot installed (there are tutorials over the whole internet) and extract the 7z file in the adb/fastboot folder. Make sure you DO NOT extract the system.img.gz, it is supposed to be flashed in its state. Now you can basically follow my video steps. Don't forget to reboot after flashing fastboot
Common errors
Invalid sparse file format at header magi
To fix: Flash 4.2.2 instead, and if you still want 4.4.2, flash the 4.4.2 zip via recovery.
Leave a thanks if I helped you and if you run into issues, reply

I know this is old, but the download doesn't work for 4.2.2 zip :/

Petrifying Gaming said:
I know this is old, but the download doesn't work for 4.2.2 zip :/
Click to expand...
Click to collapse
Shoot you're right! I'll get it up asap

Petrifying Gaming said:
I know this is old, but the download doesn't work for 4.2.2 zip :/
Click to expand...
Click to collapse
Fixed, check op for download link
Note, it is a direct link, so once you click the link it'll start downloading.

ramiabouzahra said:
Fixed, check op for download link
Note, it is a direct link, so once you click the link it'll start downloading.
Click to expand...
Click to collapse
Thank you so much!

ramiabouzahra said:
Fixed, check op for download link
Note, it is a direct link, so once you click the link it'll start downloading.
Click to expand...
Click to collapse
The link doesn't work again . Same one.

flash drive?
Hello,
I cannot find a flash drive (dual micro usb-usb) that is not OTG. Do you have one you can recommend me for purchase?
Thanks

help
ramiabouzahra said:
Shoot you're right! I'll get it up asap
Click to expand...
Click to collapse
hey it would be nice if you could share those fastboot commands.
or share a link of a video please.
and... that link is down again....

Hello,
got bricked too after 4.2.2 fastboot flashing, with usb logo at startup, any help ? Thank's

no funciona zip 4.2.2 jelly bean

[ROOT][RECOVERY]Asus Zenfone Max ZC550KL Qualcomm Snapdragon 615 MSM8939

Guide for rooting and Twrp installation for Zenfone max ZC550KL 615 MSM 8939 :
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
FILES NEEDED
DRIVERS\TOOLS
a. adb setup; http://www.mediafire.com/file/jsbx6isfpgle319/adb-setup-1.4.3.exe
b. Android usb drivers ;http://www.mediafire.com/file/57fzehmcfqk0y7t/ASUS_Android_USB_drivers_for_Windows_20150212.zip
c.minimal adb and fastboot : http://www.mediafire.com/file/0h36wb7e8aoimvb/minimal_adb_fastboot_v1.3.1_setup.exe
d. Asus bootloader unlock tool for 8939 device : http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
TWRP\ROOT FILES
e. custom recovery image file (Twrp) :
https://www.mediafire.com/file/1kyk0q3b99kcrue/Twrp_3.0.2.img
f. SuperSU file (root) : http://www.mediafire.com/file/dchiph3qkml3u8g/PRO-SuperSU-v2.67.zip
STEP BY STEP GUIDE
1. Download and install adb and Android usb drivers if you don't have them already installed, otherwise, you can skip
2. Download and install minimal adb and fastboot and put icon on desktop
3. Download the Asus bootloader unlock tool .apk file to your device and install like an application in order to unlock bootloader(follow on-screen messages)
4. Boot device into CSC MODE(fastboot\bootloader) and connect to PC via usb cable. (To boot into CSC MODE , press and HOLD "volume up key+power key")
5. open minmal adb and fastboot and enter the following commands:
Code:
[COLOR="Red"]fastboot devices[/COLOR]
hit enter on keyboard and the serial number of your device SHOULD show in minimal adb window, if it does'nt then you've not installed your Android usb drivers correctly !
Code:
[COLOR="Red"]fastboot flash recovery[/COLOR]
after this command press the SPACE KEY ON KEYBOARD AND DRAG THE "CUSTOM RECOVERY IMAGE FILE TO THE MINIMAL ADB WINDOW then hit the enter key on your keyboard and Twrp will be flashed .
IMPORTANT !!
After flashing the TWRP file, you should boot directly into recovery by holding VOLUME DOWN+POWER BUTTON do not allow device to boot into home screen at first boot, otherwise stock recovery will be restored !!!
6. After booting into TWRP , FLASH THE ROOT FILE IMMEDIATELY !
WARNING !
if you don't flash the root file once in twrp, you might encounter a bootloop!
some users report a password prompt while in Twrp, just press "cancel" then go to twrp home screen , WIPE-FORMAT DATA, after formatting data , go back to twrp home screen -REBOOT-RECOVERY , after that flash the root file (make sure your root file is on an external sd card .

Just followed instructions word by word and successfully rooted my Asus Max SD 615 !
Thanks !:good:

Plez upload video..
Please upload video for how to root,twrp and adb installing..because i m a android beginner.

Nandha2335 said:
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Click to expand...
Click to collapse
Well i guess if you follow it step by step there won't be any problem.If you get stuck at some point just comment here.And installing adb is just like the normal installation of any setup files in windows.Regarding the flashing of twrp there is nothing much to do than the steps mentioned above.If you still need a video go for this.https://youtu.be/kmq2Eyzl3wA NOTE:This video makes use of files for the sd410 model,so don't use the files in that video.Get the files from this post.This video can make you familiarize the process,but steps mentioned here is slightly different.

Nandha
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..

Nandha
Thank u so much bro ..i m following as per u r procedure now my mobile was rooted ...

Nandha2335 said:
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Click to expand...
Click to collapse
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).

Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193

jide1 said:
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
Click to expand...
Click to collapse
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Bro how to change notification panel ..and status bar

Nandha2335 said:
Miui 8 rom properly working or not
don't ask me, i didn't post any rom here, ask him https://forum.xda-developers.com/showthread.php?p=73339833
Click to expand...
Click to collapse

Nandha2335 said:
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Bro how to change notification panel ..and status bar
Click to expand...
Click to collapse
Try using gravity box after installing xposed framework.There a lot of graphical tweaks in gravity box.

Internal Storage Files Missing
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.

Place the root file on an external sd card.

jide1 said:
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Click to expand...
Click to collapse
Thank for your fast reply. By following your steps, I was successful in rooting the phone but when rebooting back to home screen, the black screen's still there.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
I guess you have copied the super su file to external sd card.Formatting data as mentioned by jide1 did remove the encryption for me.If it doesn't work do advanced wipe with only the data,cache and dalvik cache boxes checked.Note:don't check any other box.Then reboot into twrp.Go to mount in twrp and see that your external sd is mounted.Now access the external sd card in install option and you will find the files of super su.

How to get into twrp recovery?
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost

6goyal said:
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
Click to expand...
Click to collapse
Flash twrp again ,disconnect usb cable from pc, then press and HOLD "volume down" AND "power button" when device vibrates, RELEASE "power button" WHILE still holding "volume down" , that should do the job.

Need stock boot.img
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.

Volker802 said:
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Click to expand...
Click to collapse
Download the official firmware from Asus website and unpack the zip file, and you'll see the boot.img file there.