[Q]Dual/Flashing Froyo Kd1 and Faux Ginger T759 - T-Mobile Sidekick 4G

Okay, so we have gingerbread on the sidekick 4G, and it isn't quite yet a daily driver. I miss some features of Froyo, but crave gingerbread. Would it be possible to create a system that can backup one ROM and reflash the other, being able to switch between the two, such as Froyo in the morning and ginger in the evening?
Sent from my SGH-T759 using xda app-developers app

Sure, but you'll have to make a new recovery that will work with both, the most current recovery for this phone will only work with froyo builds
Oh and I'm referring to just creating and restoring nandroids, a true dual boot bootloader is out of the question
Sent from my Nexus 4 using XDA Premium 4 mobile app

I was thinking something along the lines of an app that could backup the entire phone as an odin file, or maybe a tool that can convert nandroids to odin and flash...being compatible with froyo as well
Also, would you know how to solder a new usb port to this thing? mine is on its way out.

I was thinking something along the lines of an app that could backup the entire phone as an odin file, or maybe a tool that can convert nandroids to odin and flash...being compatible with froyo as well
Also, would you know how to solder a new usb port to this thing? mine is on its way out. I had so many plans for this thing after i finish learning android development so i could make this a nexus SIdekik and it's dying before i get the chance.

I wouldn't be surprised if there is such a program but my knowledge of Samsung is limited and off hand I can't think of one
As far as soldering goes its not too hard to do, so long as you are at least half way decent at soldering. The new port should run about $5 and while you're at of you may consider doing the unbrickable mod
This however you need to be a bit more skilled as its extra fine soldering with a lot of opportunities for messing up
Best of luck!
Sent from my Nexus 4 using XDA Premium 4 mobile app

Related

PSFreedom

Just a FYI for anyone interested, I am taking a crack at porting psfreedom to the epic4g. Not sure who would be interested in trying to use this.
Sent from my SPH-D700 using XDA App
EDIT 11/02/2010
Here is a psfreedom.ko if anyone wants to try it, I had to setup the Epic to load it on startup (via RC script) on DI18 stock, but using Epic Experience 1.2.04 with MixUp DI18 Voodoo I was able to load it after startup.
Good luck.
Fortunately it isn't my first song and dance with linux kernel modules, so at least that is going for the effort.
Sent from my SPH-D700 using XDA App
good luck will be looking forward to this if u get it working
Well, I have it compiling, which is definitely a good sign, just have to fight an insmod problem and making sure I don't lock myself out of my phone in the process. I will let everyone know how the process goes from here.
Will throw a donation your way if you can get this running. Was gonna order the key but I would rather just have my phone compatible.
Sent from my SPH-D700 using XDA App
I am very interested in this! I was about to use my sisters MT3G to try it out, but my lovely roommate updated my PS3 today to 3.42, do you know if they posted a updated fix for PSFreedom yet?
Anyways good luck and can't wait.
i would certainly love this
Good luck with that man. Im no dev but I'd definately help test this. Maybe you can ask for help from the guy who originally ported it to android if you need any. Thanks again for your efforts
hell yea i will donate for sure if you get it working
I would also donate if it could be done by this weekend.
Sent from my SPH-D700 using XDA App
Well I damn well hope to have it working by the weekend, otherwise I'll have to find a Pre with a broken screen or something for this weekend's use.
khalaan said:
Just a FYI for anyone interested, I am taking a crack at porting psfreedom to the epic4g. Not sure who would be interested in trying to use this.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Get it done within 2 weeks and i'll be able to install and test for you, only issue is after that i have to send back my Epic (I only have for 30 day test, company lets me toy around with new phones).
this wud definetly be epic .. quick question since this was ported to android does anyone know what its working on or where there is a tutorial or somthing...thanx
khalaan said:
Just a FYI for anyone interested, I am taking a crack at porting psfreedom to the epic4g. Not sure who would be interested in trying to use this.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
:O
Epic 4G = Samsung Vibrant for T-Mobile ?
the hardware drivers wouldnt be all that different but im sure would still need a revision of sorts. i cant imagine they used different usb chips in the different versions.
just to clarify to everyone when this works (not if ) the very concept of it means you will lose all usb functions aka mass storage (access to your sdcard over usb), adb tethering and anything but charging. if its possible to make it into a script so that whatever file may be needed can make a backup and rename the original and then another script to make it revert then you could flip flop
However according to my knowledge you only have to run the exploit once to get backup manager on your ps3. Therefore couldn't we just run this script load up the exloit then flash back to stock and be done with it. Its not like you have to keep the exploit on your phone to use backup manager...
Sent from my SPHto-D700 using XDA App
Shoot221,
Can you PM me? I need some info on the vibrant to build that in parallel.
Bubby323,
Wrong. You need it attached on each startup of the PS3. I will make this as user friendly as possible.
Sent from my SPH-D700 using XDA App
Hopefully it'll work on the international galaxy s i9000

Help rooting Quench/Cliq xt

After setting up SDK Manager and installing motorola 4.9.0 drivers, in device manager, I see that Mot composite adb interface has a warning. I checked the properties and it says it failed to initialize (code 37). Anyone ever come across this? I've uninstalled and reinstalled several times to no avail. Just hoping to root and need a little hand.
Dude, all the Cliq xt info on rooting can be found over at modmymobile.com forums, plus a good custom recovery, and quite a few Roms.... more rom's on simplyandroid forums also....
I practically lived there til I got rid of my Cliq xt
Sent from my SCH-I500 using XDA App
I was there, couldn't quite find help for this, that and ive been a, long time reader here.
Sent from my MB501 using XDA App
malevolentbratchny said:
After setting up SDK Manager and installing motorola 4.9.0 drivers, in device manager, I see that Mot composite adb interface has a warning. I checked the properties and it says it failed to initialize (code 37). Anyone ever come across this? I've uninstalled and reinstalled several times to no avail. Just hoping to root and need a little hand.
Click to expand...
Click to collapse
Sounds like a driver issue. if you install the wrong driver for something thats the same error code you will get. not sure if thats the case but i thought id throw in my 2 cents haha
Thanks to both of you, I apologize for lack of forum etiquette. I'm sure i've got the right drivers though
Sent from my MB501 using XDA App
Iir I had to install the Motorola flashing program, the name of which eludes me at the moment .... to get the phones drivers set IP properly for it to be visible from adb ... if your on windows 7 one or the other of those apps have issues working right without launching it as administrator by holding shift, and right clicking and saying run as administrator then.answering yes to the dialog that pops up
Sent from my SCH-I500 using XDA App
thank you, on vista. Ill look into that.
Sent from my MB501 using XDA App
Does SmartMoto by smart-clip sound right?
Sent from my MB501 using XDA App
Rsd lite is the proggy I had to install to get my Cliq xt drivers situated finally.... if your on 64 bit windows it is a little different also... cause u need the 64 bit drivers
Sent from my SCH-I500 using XDA App
Rsd lite is the official moto tool.... be careful with it, you can brick your phone EASY with it... make sure you read Skirilax_CZ posts on momymoto forums thoroughly as well as the full details on the custom recovery ..... knowledge from reading the forums is free...bricking your phone beyond fix and having to buy another cause your warranty is voided isnt
Sent from my SCH-I500 using XDA App
Cheers man. Thanks for the back & forth too. Ill check it, out after work.
Sent from my MB501 using XDA App
No problemo..... that was a great little phone....I was so disappointed when moto decided not to officially support it after 1.5 after saying the would get it to 2.1 for months...
I left T-Mobile over it, burned almost 400 bucks buying it o. Release day, and got no satisfaction on seeking an upgrade or replacement for less than the same.... sad little company...was with them almost 7 full years and they could do nothing useful for a "valued" customer....
Sent from my SCH-I500 using XDA App
Thats vile dude. Im On rogers and I guess if im thoroughly unhappy with the phone and say its problematic there is a refurb program for 50 bucks. Sounds Decent and I may go down that venue. Ive been wanting to root for awhile because as a canadian rogers said no to the 2.1. Ive accepted it and am going about the "other options". Mostly for multitouch. I know its a little faux pas to compare roms, but do you have any good suggestions for a rom. Im thinking either barely blurred or adlxmod 2.1.54 consolidation as they appear to be the two that everything works for the most part.
Sent from my MB501 using XDA App
Most all of those roms work well...the only hiccup is the speaker toggle issue.....different ones are worse about it than others...
Basically when you get a call...you might have to switch the speakerphone off and on for the other party to hear you....iir same holds true if you make a call....
FWIW, before I passed it to my brother, I was using the latest official Motorola motoblur release, still based on 1.5, but I had manually gone thru and stripped out a lot of the bloat....mostly stuff I'd never use, including the Amazon mp3 store that ALWAYS runs in the background eating mass resources. I'm actually kinda fond of the happenings widget, and how motoblur integrates all the contacts so well across social networks....the downside is if u move off of a motoblur device, you loose all your motoblur contacts...so if you haven't been keeping your Gmail contacts updated, well.you'll spend a few hours like I did keying them over manually.
Happenings is cool, cause it shows every status posted by every friend on Facebook, so you don't miss anything, and always know where you left off last time you were there.
I enjoyed being that connected, YMMV...
I think overall, the fastest fully functional rom I ran was the vanilla one based on 1.5.... basically makes the device function exactly like a stock mt3g or g1....just with more ram and app storage.
Sent from my SCH-I500 using XDA App
Nice. Thanks. I got the adb interface working last night. Installed on a different pc. Ill let you know how it goes.
Sent from my MB501 using XDA App
Cool!
Sent from my SCH-I500 using XDA App
Got it!
Rooted and Flashed a 2.1 rom with motoblur features still in it. ADLXmod 2.1.54-2 Consolidation was the name I think. It's sweet. Thanks again for the back and forth and help. I agree the XT is a deadly little beast, underrated and now unleashed.
Yeah, very solidly built, 256mb ram....why it never took off is beyond me.
Gratz on the new Tom. That sounds awesome.
How're the issues with making voice calls. Does it work right now?
Might need to try that rom on the one I gave my brother.
Sent from my SCH-I500 using XDA Premium App
voice calls are no problem, there was a speakerfix by a dude named @firesnatch included in the rom itself. you can hear it automatically turn the speaker on then back off. I often use the 3.5mm jack into my car stereo so voice calls on that have been 100% normal/flawless. I highly suggest it as it's got some sweet stuff built in like wi-fi tether, titanium backup, and clockwork's Rom Manager. Loving the launcherPro as well, because adlxmod also uses the motoblur HOME ui (dialer on left/apps in middle/contacts on right) but with the launcherpro UI I've got 5 shortcuts instead of those three, and at that - those shortcuts are customizable.
Sweet! Ill have to set that up for my bro. How well does Tom Manager play with jr0dd's recovery
Sent from my SCH-I500 using XDA Premium App

Z4root

I am attempting to root my sisters captivate and install cm7. How do I get z4root installed onto the phone.
Sent from my DROIDX using XDA App
At the risk of sounding like an ass, if you can't root the phone you sure dont need to try flashing cm7. It's a VERY difficult, multi step process where one tinymistake will soft brick your phone.
You don't need to root first in order to flash different roms.
Also, are you sure your sister wants cm7? She'll lose divx playback, 720p, hardware noise cancellation, and some other samsung specific things..
Sent from my SGH-I897 using XDA App
mrhaley30705 said:
At the risk of sounding like an ass, if you can't root the phone you sure dont need to try flashing cm7. It's a VERY difficult, multi step process where one tinymistake will soft brick your phone.
Click to expand...
Click to collapse
You don't sound like an ass I get that part. I am just unfamiliar with how to get it rooted easily I would've been doing it at her place away from my computer and was hoping there was a easy one click way to root her phone. I am familiar enough with android to flash the rom. Just not with the stupid att no side loafing apps policy
Sent from my DROIDX using XDA App
modest_mandroid said:
You don't need to root first in order to flash different roms.
Also, are you sure your sister wants cm7? She'll lose divx playback, 720p, hardware noise cancellation, and some other samsung specific things..
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Thank you for that ill make sure she knows that before I proceed. Buy she barely uses the phone for much more than calling texting and Facebook
Sent from my DROIDX using XDA App
Vettesfan said:
Thank you for that ill make sure she knows that before I proceed. Buy she barely uses the phone for much more than calling texting and Facebook
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
If that's the case, I'd probably just stick to one of the 2.2 roms in the dev section here. Calls will sound better with Cog 4.3, simply because of the hardware noise cancellation. They also include the Swype keyboard by default, which CM7 does not.

Can I Just Put A Modem On My Phone?

I would put a custom rom but they never work well. So is there a way to just put a modem in the default rom? Please tell me if I can thanks. I just want to tather.
I don't know what tather is but i do know what tether is. The custom roms here do work well.
Sent from my SAMSUNG-SGH-I997
tmease1 said:
I don't know what tather is but i do know what tether is. The custom roms here do work well.
Sent from my SAMSUNG-SGH-I997
Click to expand...
Click to collapse
They don't they always never start up, crash, force close, and restart Ive tried about 20. I ment tether
all the modems perform about the same. no reason to flash a new one. its not like the galaxy s with 30 different modems for different carriers in different countries and different hardware. also many of the galaxy s modems were sub standard imho so using a different on could have big benefits. the infuse never had that problem.
now if it's tethering you are after that has zero to do with the modem. there is a file in att roms called tethermanager.apk or some variation of that. just delete it or flash a near stock rom without it, for froyo I recommend infused 1.6 or bionix, for gingerbread I recommend bionix biui build 3. but if you use an iPhone unlimited plan they do packet sniffing and will know and force you to update to a teired data plan.
Pretty much what the guy above me said. Modems do not do as much here anyway. Roms do work very very well, just choose wisely.
http://code.google.com/p/android-wifi-tether/
Sent from my SGH-I997 using xda premium
^^^^^^^this Guy should be banned just for that screen name......
Sent from my SAMSUNG-SGH-I997 using xda premium

Swapping motherboards, keep root data and apps easy?

I have a gs3 that I rooted back on ICS, and now my micro usb charging port is wearing out. I have a broken screen gs3 that may be on jellybean. Was thinking of swapping motherboards since the port it's attached to the board. Is there an easy way to not lose my data? Was wondering if I could just do a nandroid restore after I rooted the new board? Not sure what all is stored on the actual board. Maybe someone could fill me in on that as well.
Sent from my SCH-I535 using xda app-developers app
I don't know about that, and I'm not sure if you're interested, but I just today ordered qi wireless charger and receiver tag. May be a whole lot easier
Sent from my SCH-I535 using xda app-developers app
brandonb0013 said:
I have a gs3 that I rooted back on ICS, and now my micro usb charging port is wearing out. I have a broken screen gs3 that may be on jellybean. Was thinking of swapping motherboards since the port it's attached to the board. Is there an easy way to not lose my data? Was wondering if I could just do a nandroid restore after I rooted the new board? Not sure what all is stored on the actual board. Maybe someone could fill me in on that as well.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Well if you have the skill to replace the Mainboard..OK, as long as your broken screen phone is not on 4.3, you should able to take a nandroid backup and then restore it back to the new hardware. If your nandroid image included root, then you should have root on the new hardware, you don't have to root the new hardware.

Categories

Resources