Sorry for my bad english..
When I plug the charger, it doesn't charge, just appears a red X. And when I plug it into the Pc, it wont detect it, just "charge" (The red X still appears) I don't know why, somebody could help me?
The cable is the original samsung's, I need to buy another one?
thanks
Answer.
DavidBatman said:
Sorry for my bad english..
When I plug the charger, it doesn't charge, just appears a red X. And when I plug it into the Pc, it wont detect it, just "charge" (The red X still appears) I don't know why, somebody could help me?
The cable is the original samsung's, I need to buy another one?
thanks
Click to expand...
Click to collapse
Hi i had the exact problem with red X.i thougt it was bad but i seen that is the charger symbol.you charging fully discharged device?
zgzdgz said:
Hi i had the exact problem with red X.i thougt it was bad but i seen that is the charger symbol.you charging fully discharged device?
Click to expand...
Click to collapse
Yes, in the battery info screen it says "not charging" :T
Had this several times, replace the cable.
jonajuna said:
Had this several times, replace the cable.
Click to expand...
Click to collapse
Yes, same symptoms here with a bad cable on my wife's tablet. Replacing a cable fixed it.
Related
Hi hello my problem is how to connect my phone to the computer's cable + vol-there is no green LED blinks red phone does not turn I'm sorry but I do not know English I use google translator jak by co to z polski jestem
Wow. Just had the exact same problem an hour ago. Take out the battery, connect the microUSB charger to that of a tablet or a bigger phone (hint: the charger should give at least 1.5A of current, not 0.85A like the E's charger does). After connecting the charger, put the battery back in. After about ten minutes, try flashing again. It'll work.
NSDCars5 said:
Wow. Just had the exact same problem an hour ago. Take out the battery, connect the microUSB charger to that of a tablet or a bigger phone (hint: the charger should give at least 1.5A of current, not 0.85A like the E's charger does). After connecting the charger, put the battery back in. After about ten minutes, try flashing again. It'll work.
Click to expand...
Click to collapse
usb 3.0 enough?
Not working **** my life
DexorikXperia said:
usb 3.0 enough?
Click to expand...
Click to collapse
Hit or miss. Sometimes (on my laptop, for example), USB 3.0 works. Some other times (on my friend's laptop (he has Xperia J)), USB 2.0 has to be used.
Why? What happened?
No change is still flashing red light and the computer it is not.
DexorikXperia said:
No change is still flashing red light and the computer it is not.
Click to expand...
Click to collapse
How long did you charge? Which charger did you use?
NSDCars5 said:
How long did you charge? Which charger did you use?
Click to expand...
Click to collapse
i 10 minut przez usb 3.0
worked at the time the computer was installed the drivers, and here we go again
Emma worked but that show an ok after all the phone does not start as I plug in the AC charger is świecisię green LED: (
DexorikXperia said:
Emma worked but that show an ok after all the phone does not start as I plug in the AC charger is świecisię green LED: (
Click to expand...
Click to collapse
What the green LED?
I think you need to charge via a real charger. Even USB 3.0 doesn't give enough current.
After Flash mode, Emma, or PC Companion, always remove your phone's battery after flashing.
DexorikXperia said:
Not working **** my life
Click to expand...
Click to collapse
Try solution by UltraGamerHD , http://forum.xda-developers.com/showthread.php?t=2577490
Sent from my ST21i using Tapatalk
Yesterday i installed some apps on my tab (P5110) with cyanogenemod11 then i plugged the charger ,after at least 2 hours the baterry was still 1% then today morning 10:00 i shut down my tab and now 15:00 it's only 40 % i installed mokee and same thing ,doesn't charge i have a wall charger Please help me !!
Sorry for bad english
look at battery stat, see whats draining...wipe battery stats
0semaj0 said:
look at battery stat, see whats draining...wipe battery stats
Click to expand...
Click to collapse
When i plug the charger it's says "Not charging" but when i shutdown my tab it's charges but its takes forever to full charge !
sidodz said:
When i plug the charger it's says "Not charging" but when i shutdown my tab it's charges but its takes forever to full charge !
Click to expand...
Click to collapse
Try another charger. Quite a few people seem to be complaining about the OEM Sammy chargers going kaput. Also could be a cable problem (broken wires) - I had a similar problem with my wife's tablet, fixed by replacing a cable.
kt-Froggy said:
Try another charger. Quite a few people seem to be complaining about the OEM Sammy chargers going kaput. Also could be a cable problem (broken wires) - I had a similar problem with my wife's tablet, fixed by replacing a cable.
Click to expand...
Click to collapse
Tnx everyone for your help i will buy a new one .
sidodz said:
i will buy a new one .
Click to expand...
Click to collapse
Before buying a new charger, I would suggest confirming the exact problem first. You may be able to borrow a charger from someone (any USB charger with approx 2 Amp output will work, for example, from an iPad), or a cable. See what fixes the issue, and get a replacement. Also, if you have some average soldering skills, the cable can fairly easily be fixed at home (in case it is a faulty cable) - the wires usually break at the connector, and the OEM Sammy 30-pin connector is snap-assembled, not glued, so you can take it apart and put it back togethet. Good luck!
kt-Froggy said:
Before buying a new charger, I would suggest confirming the exact problem first. You may be able to borrow a charger from someone (any USB charger with approx 2 Amp output will work, for example, from an iPad), or a cable. See what fixes the issue, and get a replacement. Also, if you have some average soldering skills, the cable can fairly easily be fixed at home (in case it is a faulty cable) - the wires usually break at the connector, and the OEM Sammy 30-pin connector is snap-assembled, not glued, so you can take it apart and put it back togethet. Good luck!
Click to expand...
Click to collapse
Thanks for your suggestion but i alreadh bought a new one but thanks againe for your help
sidodz said:
Thanks for your suggestion but i alreadh bought a new one
Click to expand...
Click to collapse
So... Does it work now?
kt-Froggy said:
So... Does it work now?
Click to expand...
Click to collapse
Yes it's works , and i gave the old charger to my uncle and he said that the problem were in the USB cable
I hope to be asking in the right section,
my nexus 5 only works while charging,but the battery isn't charging.I mean,i left it during the night to charge,but it didn't move from 0%.i tried to unlock the bootloader to have a full wipe but still nothing changed.I can't understand what's the problem,i tried everything.It doesn't charge at all.I've also tried the app ampere and it says that it's ac connected,but the battery isn't charging ,even if the phone says the opposite:any idea?
thanks for the answers.
p.s i've changed the battery with a new original one and it worked fine,until some days where it's not charging anymore.the old battery does the same,i can't even use the smartphone with that .
Maybe the usb port/flex cable is defective?
audit13 said:
Maybe the usb port/flex cable is defective?
Click to expand...
Click to collapse
no because I tried every possible cable,and everyone let me use the phone with 0% battery
Since you've eliminated the battery and flex cable, only thing left is the mobo?
Hey Guys,
i recently did change the Display on my D6603 Z3. It took some for the Display to arrive, so i did not charge the Smartphone at that time.
After changing the Display my Phone only gets a Red LED when plugged into the charger but none of the Reset combinations seem to work.
Also does the LED stop after sometime. Anyone has an idea what could be wrong ? Its a constant bright RED light.
Mine did a similar thing if I remember correctly. The LED should at least change colour when charged, stays red= battery not charging. I changed my battery and has been fine ever since even though it is a cheap one off ebay!
Presume you've pressed the tiny yellow reset button that's next to the sim card.
Just stick a new battery in it's not like it'll ever be waterproof again! lol
jim
I did change the Battery but it seems like somethin is wrong with the USB Port. I got the Z3 Running now but suddenly i am not able to load it anymore. Its on and i have 40% Battery but when i put in the USB Cable nothin happens. Also its not regocnized when putted into the PC. Any tipps ?
nokio11 said:
I did change the Battery but it seems like somethin is wrong with the USB Port. I got the Z3 Running now but suddenly i am not able to load it anymore. Its on and i have 40% Battery but when i put in the USB Cable nothin happens. Also its not regocnized when putted into the PC. Any tipps ?
Click to expand...
Click to collapse
Try charging via the magnetic port.
I tried that. It does not really work. When it connects then disconnects then connects again for about 15 times or more . The LED blinks orange the whole time. after that it starts chargin but it charges 10% in 6 hours
what i also noticed it that i wont get the message anymore that when the cover of the usb plug is unplugged.
Webern said:
Try charging via the magnetic port.
Click to expand...
Click to collapse
seems that battery was to cheap and or the battery chips are broken.
TjNiko said:
seems that battery was to cheap and or the battery chips are broken.
Click to expand...
Click to collapse
what are the Battery Chips ? It is an original Battery from another Z3. I have 3 here now and got the same problems with all of them. It seems like that the charging power is not constant but it charges then stops then charges. Repeats like 2 times per second.
welleither u should try to getg an 2A charger and proper cable and retry. else ur usb port (z3 ones) might be defective
Guys, please tell me how to solve the problem: phone is connected to the charger, but it says that it is not charging.
Previously, he calmly charged, but now he does not want to ..
The wire and power supply charge other devices quietly.
You should try another cable and charger block. Move the connector around in slow increments to see if the lightning bolt shows up in battery. Reboot the phone and check. Common sense is to check these things
Sasaiber said:
Guys, please tell me how to solve the problem: phone is connected to the charger, but it says that it is not charging.
Previously, he calmly charged, but now he does not want to ..
The wire and power supply charge other devices quietly.
Click to expand...
Click to collapse
Clean out your port
schmeggy929 said:
You should try another cable and charger block. Move the connector around in slow increments to see if the lightning bolt shows up in battery. Reboot the phone and check. Common sense is to check these things
Click to expand...
Click to collapse
The strangest thing is that the non-working cable used to work perfectly. It even now charges other devices.
I tried another cable and everything works, I don't understand why the Pixel doesn't want to charge from the old cable ...
Wi1son said:
Clean out your port
Click to expand...
Click to collapse
It's about the phone itself. That cable charges other devices and used to calmly charge the pixel, but recently stopped.
I tried another cable - everything works. But the current one is shorter than my last one by 2 meters
Same for me all my previous huawei supercharge compatible cable are not working with the pixel.