Related
hi all
i flashed xxkpe and tried to upgrade via samsung kies but it isnt working, what to do, it says it isnt supported...
I guess you need to unroot as well.
Hetalk said:
I guess you need to unroot as well.
Click to expand...
Click to collapse
hmm unroot via cwm recovery and than flash xxkpe cuz im still in titanium...?
Ditbardh said:
hmm unroot via cwm recovery and than flash xxkpe cuz im still in titanium...?
Click to expand...
Click to collapse
Kies won't work unless you are on stock firmware. You'll need to go back to stock firmware/kernel and then unroot.
Just unrooting won't since the issue. You'd have to refer to the stock firmware as well as kernel as told earlier.
you'd have a custom cf kernel with cwm, goto stock by flashing xxkpe starting from pit.
Press thanks if helped
iAmBalvinder said:
Just unrooting won't since the issue. You'd have to refer to the stock firmware as well as kernel as told earlier.
you'd have a custom cf kernel with cwm, goto stock by flashing xxkpe starting from pit.
Press thanks if helped
Click to expand...
Click to collapse
so all i need is to flash stock xxkpe ? cuz i did it before and when i tried to upgrade via samsung kies it sad that it isnt supported, ill try again and ill post here, thanks all
Go for your region specific firmware. Then unroot. I think there are unroot instructions on cfroot thread.
Sent from my GT-I9003 using xda app-developers app
Hetalk said:
Go for your region specific firmware. Then unroot. I think there are unroot instructions on cfroot thread.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
flashed xxkpe and before flashing it i flashed unroot zip but still cant upgrade via kies...
first update ur kies then connect ur i9003 to pc in Samsung Kies mode.but before that u must be on ur region specific rom (i.e from region in which u live) and u should not be rooted.
pratik_s said:
first update ur kies then connect ur i9003 to pc in Samsung Kies mode.but before that u must be on ur region specific rom (i.e from region in which u live) and u should not be rooted.
Click to expand...
Click to collapse
im in europe can anyone help me which firmware i must have... ?
Install your region csc if you are using multi csc
To check your csc type following code
*#272*[yourIMEI]#
Take backup before typing this code
This will erase all your data
Sent from my GT-I9003 using xda premium
Ditbardh said:
im in europe can anyone help me which firmware i must have... ?
Click to expand...
Click to collapse
You can try eithe kpq or kpu
I'm seeking help regarding the bootloader for my P3110:
>I can not install any new 4.1.2 roms because the bootloader fails in Odin (these new 4.1.2 firmwares seem to flash bootloader 1st)
>When I install older 4.1.1 firmware, the rom installs but the bootloader fails at the end although the device will boot normally after that.
>Codeworkx's bootloader (from CM10.1 page) will not install on odin either.. I just get an error message.
>Using triangle away on stock 4.0 and 4.1 will not work properly because of my bootloader issues.. (Modified status always comes back)
Maybe I could try flashing a CWM zip of the JB bootloader?? Could someone make or show me how to make one??
I've tried the obvious such as flashing back to ICS stock etc
Any help would be greatly appreciated as I would like to return the device to its original form... but I cannot do this as the device will not let me achieve any OTA updates (always says device has been modified)
Thanks
Matt
AW: Bootloader fail
CWM cant Flash the Bootloader, so a zip is useless. Choose heimdall for flashing the bootloader.
Dexxmor said:
CWM cant Flash the Bootloader, so a zip is useless. Choose heimdall for flashing the bootloader.
Click to expand...
Click to collapse
Thanks but why should that work over ODIN?
AW: Bootloader fail
Thats a good question, but i dont know the answer i prefer heimdall (Linux on my machine).
Dexxmor said:
Thats a good question, but i dont know the answer i prefer heimdall (Linux on my machine).
Click to expand...
Click to collapse
But I think that ODIN does not flash a bootloader because my existing bootloader is damaged
Try flashing any 4.0.4 stock rom then go back to jellybean.
Sent from my GT-I8190 using xda app-developers app
Pezmet said:
Try flashing any 4.0.4 stock rom then go back to jellybean.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.. I've done that but even though the firmware installs fine... "DEVICE HAS BEEN MODIFIED" always comes back when trying to OTA update.
When gone from 4.0.4 to 4.1.1 the bootloader fails to install... even though the rom itself has installed and runs
Modified status always comes back and all bootloaders fail to install
Oh.. Then flash any rooted room, use triangle away to reset counter (run the app then go directly to download mode), you will notice that counter and binary should be now 0.
Get 4.0.4 for your region and tablet. ( samfirmware or Samsung-updates). Flash it. Status should be official.
Get any csc chanter from play store and change CSC to your country (not all roms need this).
Update with kies or OTA and hope for the best.
Good luck.
Sent from my GT-P3110 using xda app-developers app
Pezmet said:
Oh.. Then flash any rooted room, use triangle away to reset counter (run the app then go directly to download mode), you will notice that counter and binary should be now 0.
Get 4.0.4 for your region and tablet. ( samfirmware or Samsung-updates). Flash it. Status should be official.
Get any csc chanter from play store and change CSC to your country (not all roms need this).
Update with kies or OTA and hope for the best.
Good luck.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Tried that several times... Modified status always comes back
P3113 bootloader instead of P3110
In the 1st few weeks of owning the device I accidentally flashed P3113 firmware instead of a P3110.
So ever since then, when in download mode, PRODUCT NAME = P3113
Do you think I have a P3113 bootloader instead of a P3110??? Is this why I cant flash a new P3110 Firmware (with sbl) because they clash???
P3113 bootloader instead of p3110
Ok so I'm getting closer to understanding why my device is behaving the way it it...
My bootloader shows that it is a P3113 device (the display in download mode)
So when I try to flash stock P3110 roms... it fails on the bootloader... because they dont match.
(My device is the P3110 by the way)
So why cant I flash a P3110 bootloader???
SO CONFUSED!!
Anyone got any more ideas??
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Gh3ttoKiLL4 said:
Heyo everyone
I'm coming from cm10.1 and now i wanted to go back to stock.
so I've downloaded I9105PXXAMC2 from samfirmware.com
unfortunately after flashing via odin i got bootloop
i've tried to wipe from android recovery but then there's only a red triangle
is there any solution?
it's almost impossible for me to download another firmware because my internet speed sucks so massive
Click to expand...
Click to collapse
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
safariking said:
Install CWM with odin and wipe your data cache and dalvik cache from there then it will boot up fine
Click to expand...
Click to collapse
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Brian_SGW_CM9 said:
I think installing clockworkmod for wiping isn't an option. The op flashed stock Rom probably because he wants his warranty back
Installing clockworkmod again would void it again. If the stock Rom you downloaded is the one you had before rooting, then try flashing it again. If it's not, then download your originally out of box stock Rom and flash it with Odin.
Like...the same baseband version as the one you had before any modification of your system
Sent from my GT-I9105P using xda premium
Click to expand...
Click to collapse
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
safariking said:
You need to wipe it otherwise it won't boot up and if you had cm10.1 you must wipe your internal sd card to
if you install cyanogenmod and you odin back to stock rom the stock rom will simply not boot if no wipe was done!!!
Click to expand...
Click to collapse
I thought flashing through Odin already wipes..
So if I want to Odin back. With the clockworkmod, I first wipe, then flash stock. Right?
Sent from my GT-I9105P using xda premium
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
safariking said:
No
odin back first and after that install cwm and wipe!
Sent from my awesome S2 Plus
Click to expand...
Click to collapse
Can You please be more specific? I'm trying to install stock rom, and it's intering loop on boot. Trying to instal CWM via Odin - no success.
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Did you wipe before flashing via Odin?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
borsiknet said:
That's a question too... How to do wipe, if all I have is official bootloader, with debugging OFF, and loop / stuck on SUMSUNG logo?
(I don't care of any kind of warranty, just want to boot up this brick with ANY ROM!)
Click to expand...
Click to collapse
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Can you reach download mode?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
borsiknet said:
Yes, I'm trying all original firmware from sammobile, that appropriate to this model. Sometimes it geting custom BIN, and bootloader taking it back to samsung official.
Click to expand...
Click to collapse
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Yep, that's the only way
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe any way to know origin of the phone by S/N to which country he belong?
borsiknet said:
Maybe any way to know origin of the phone by S/N to which country he belong?
Click to expand...
Click to collapse
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Brian_SGW_CM9 said:
Find your country's name on sammobile. I mean of the firmware page of sammobile
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There are no my contry ROM. I stucked with bootloops and debug options OFF. What to do???! It's driving me crazy...
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
borsiknet said:
After almost two weeks of seeking for solutions all over internet, the problem was solved. First of all there are no way to root without debuging off via odin o any other tool. All what you have, is just to look for your original firmware of the phone, and it supposed to be four file package.
Looks like:
FULL_CSC_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_MODEM_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
FULL_PDA_I9105PXXAMC2_I9105POXAAMC1_I9105PXXAMC1_DBT.tar.md5
s2ve.pit
In this case it was german phone so files end with DBT.
CSC - as CSC
MODEM - as CP or PHONE
PDA - as AP or PDA
and pit file for re-partition.
The name of whole package is GT-I9105P-DBT-I9105PXXAMC2_Service-Firmware.zip
For those asking for delete dalvik/cache/factory reset, the solution is - RE-PARTITION!
I used also option Nand Erase All, just to be sure I delete everything.
All other operations goes as usual in Odin.
I can't post links here, bat me mercy on those looking for solution for days and weeks long.
So here is link that I found on some forum that leading to (thanx Goshhhh!!!) to Google docs, so download was just 5 min. long.
Here is German (DBT) package, and some other usefull links. Use G. translator to understand.
h t t p : / / galaxysclub.ru/obzor-osnovnyh-funkcij-obsuzhdenie-i-reshenie-problem/2111-pomogite-s-i9105-proshivki-dlya-i9105 . html
Just remove spaces, where needed. This is a Russian forum. Respect and thousand thanx to Сергей, author of usefull post with links provided, once again THANX a lot, Sergej!
Click to expand...
Click to collapse
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
That was a problem, loops after flashing with Odin.
jaskof1 said:
If anyone have problem with bootloop when flash original rom, solution is simple. Just go to recovery. Samsung has stock recovery. Wipe data/factory reset and reboot phone. Thats all . PS to go to recovery turn off phone. Wait 3 seconds. hold home buton, volume up and power buton in same tame.
Click to expand...
Click to collapse
Well this worked for me just fine
Boot into cwm
Go tot mounts and storage
Format everything (no ext sdcard
Flash firmware with Odin andere cwm would be deleted
Sprint Galaxy S5 OTA update OD3 with "Factory Reset Protection" locks bootloader?
Sprint is pushing out an OTA update with build G900PVPU2BOD3 to the Galaxy S5 and the update changelog reads "Factory Reset Protection", does it locks bootloader?
via: http://www.theandroidsoul.com/sprin...y-reset-protection-build-g900pvpu2bod3-77666/
itskapil said:
Sprint is pushing out an OTA update with build G900PVPU2BOD3 to the Galaxy S5 and the update changelog reads "Factory Reset Protection", does it locks bootloader?
via: http://www.theandroidsoul.com/sprin...y-reset-protection-build-g900pvpu2bod3-77666/
Click to expand...
Click to collapse
The reports of the locked bootloader on T-Mo S6 Edge were mistaken and premature. So the answer is no.
New update has locked me out of root access
I stupidly accepted the update.. now i can't find root access. I have tried previous firmware thru Odin and nothing works. HELP...
rivera686 said:
I stupidly accepted the update.. now i can't find root access. I have tried previous firmware thru Odin and nothing works. HELP...
Click to expand...
Click to collapse
Odin back to OA6
Sent from my SM-G900P using Tapatalk
Glad I decided not to take the OTA update, even though I'm sure there will be a fix for the loss of root.
A colleague of mine who updated her GS5 yesterday said her caller ID only shows the phone number and no longer shows the contact's name. Also, I can confirm this isn't the 5.1 update . . .
rivera686 said:
I stupidly accepted the update.. now i can't find root access. I have tried previous firmware thru Odin and nothing works. HELP...
Click to expand...
Click to collapse
I was able to root OD3 using the most recent CF autoroot for the S5. It will flash OA6 recovery though. Hopefully it will be updated to include the OD3 recovery, or I'll just wait until the OD3 tar is up on sammobile.com to grab the OD3 recovery from there.
elwood said:
Odin back to OA6
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
I've accepted the update and have tried to Odin back to OA6. Odin fails. I'm guessing we can't go back.
nyfl2004 said:
I've accepted the update and have tried to Odin back to OA6. Odin fails. I'm guessing we can't go back.
Click to expand...
Click to collapse
I did the same thing. Apparently there's no going back from OD3. If you're worried about root, just use the latest CF Auto Root for this phone. It works on OD3. Then just wait for the full ROM to be posted on Sammobile if you want to do flash that later. I'm rooted on OD3 and haven't had any issues at all.
Cooljb said:
I did the same thing. Apparently there's no going back from OD3. If you're worried about root, just use the latest CF Auto Root for this phone. It works on OD3. Then just wait for the full ROM to be posted on Sammobile if you want to do flash that later. I'm rooted on OD3 and haven't had any issues at all.
Click to expand...
Click to collapse
Yeah, it's really no problem. There's no going back, but I just re-rooted with CF Auto Root and restored an OA6 backup and all is well.
Oa6
Cooljb said:
I was able to root OD3 using the most recent CF autoroot for the S5. It will flash OA6 recovery though. Hopefully it will be updated to include the OD3 recovery, or I'll just wait until the OD3 tar is up on sammobile.com to grab the OD3 recovery from there.
Click to expand...
Click to collapse
So if the recovery is OA6, what happens if you then use that recovery? are you back in OA6 and still rooted? I guess it would be best to wait for the OD3 recovery to show up. In the mean time, still no issues?
Does anyone know how i can delete the update notification its very annoying I'm on stock rooted OA6
Sent from my SM-G900P using XDA Free mobile app
sander999 said:
Does anyone know how i can delete the update notification its very annoying I'm on stock rooted OA6
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
When the notification is on your status bar just long press and open App Info and untick the Show Notifications. No more annoying popup saying to update
April was Autism Awareness Month Sent from my SM-G900P using Tapatalk
elwood said:
When the notification is on your status bar just long press and open App Info and untick the Show Notifications. No more annoying popup saying to update
April was Autism Awareness Month Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Already tried that but wont allow me to uncheck so i just flash Moar and all good
Sent from my SM-G900P using XDA Free mobile app
sander999 said:
Already tried that but wont allow me to uncheck so i just flash Moar and all good
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
That's weird I've never been able to untick a notification. Glad you came abroad to MOAR. Please though we ask you to post your questions in the MOAR Q&A FAQ thread and not the development thread. We as a community are trying to keep the clutter in that thread to a minimal. Heck we even have an Off Topic thread for anything, just so we don't clutter the development thread.
May is Mental Health Awareness Month Sent from my SM-G900P using Tapatalk
I tried that now i cannot flash OA6 thru odin and i just keep getting fail message. I AM STUCK I HATE THIS UPDATE.
Sent from my SM-G900P using XDA Free mobile app
od3 fail
Well i was gonna ask if the od3 build update was the reason i can not flash in odin everything fails when i try to flash twrp or flash 0a6 firware or anything for that matter witch puts me into screen" firware encountered an issue" only way i get out of that is flash the cf auto root .tar or the oa6 modem witch then resets device and loads back into phone and atleast lets me use phone hopefullly thers a fix for this soon really need my custom roms back and my hotspot for work. :crying:
Teroy804 said:
Well i was gonna ask if the od3 build update was the reason i can not flash in odin everything fails when i try to flash twrp or flash 0a6 firware or anything for that matter witch puts me into screen" firware encountered an issue" only way i get out of that is flash the cf auto root .tar or the oa6 modem witch then resets device and loads back into phone and atleast lets me use phone hopefullly thers a fix for this soon really need my custom roms back and my hotspot for work. :crying:
Click to expand...
Click to collapse
I was able to flash the stock OA6 Kernel then Philz recovery through odin, and install rom from there. MOAR works without any issues. CM12.1 runs as good as it ever will, also.
morenoa48 said:
I was able to flash the stock OA6 Kernel then Philz recovery through odin, and install rom from there. MOAR works without any issues. CM12.1 runs as good as it ever will, also.
Click to expand...
Click to collapse
i can install custom roms OA6 with OD3 bootloader ?? or i need stock rom OD3
ENSENADAS said:
i can install custom roms OA6 with OD3 bootloader ?? or i need stock rom OD3
Click to expand...
Click to collapse
I'm on OD3 bootloader and I'm able to run MOAR, and my OA6 back ups.
The update also adds Lollipop's Screen pinning feature.
I tried to flash 2 firmware, one italian and one, russian , and odin failed showed some errors, only passed with the original firmware which came with mine phone which is:
PDA G920FXXU1AOCV
CSC G920FGBL1AOCN
Which other firmwares, newer ofcourse can i flash with odin?
cipjanin said:
I tried to flash 2 firmware, one italian and one, russian , and odin failed showed some errors, only passed with the original firmware which came with mine phone which is:
PDA G920FXXU1AOCV
CSC G920FGBL1AOCN
Which other firmwares, newer ofcourse can i flash with odin?
Click to expand...
Click to collapse
You can flash any 920F firmware. Country does not matter. I think your issue is not with the firmware. Are you on the newest version of Odin? I have 3.10.6 and that works fine.
I have AP:G920FXXU1AOD4 CP:G920FXXU1AOD4 CSC:G920FOJV1AOD4 and tried to flash another firmware G920FXXU1AOCW to try got my SPO2 sensor to work however this ended up soft bricking my phone. I had to use KIES to reset my phone. I am using the latest ODIN however it fails on the hidden.img.
I do not want to root my phone to fix this issue.
So in short my experience is no. Others probably have had better success.
cipjanin said:
I tried to flash 2 firmware, one italian and one, russian , and odin failed showed some errors, only passed with the original firmware which came with mine phone which is:
PDA G920FXXU1AOCV
CSC G920FGBL1AOCN
Which other firmwares, newer ofcourse can i flash with odin?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...rmware-official-stock-firmware-t3086387/page7
read from post 65 -->
Japultra said:
You can flash any 920F firmware. Country does not matter. I think your issue is not with the firmware. Are you on the newest version of Odin? I have 3.10.6 and that works fine.
Click to expand...
Click to collapse
Yes i tried with 3-4 versions of odin, didnt worked...
When i try to install different firmware , the odin fails to hidden.img...
johanbiff said:
http://forum.xda-developers.com/gal...rmware-official-stock-firmware-t3086387/page7
read from post 65 -->
Click to expand...
Click to collapse
Does trip knox?
Sent from my SM-G920F using Tapatalk
cipi01 said:
Does trip knox?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
no
johanbiff said:
http://forum.xda-developers.com/gal...rmware-official-stock-firmware-t3086387/page7
read from post 65 -->
Click to expand...
Click to collapse
Can u explain me that?
I dont get it..
Looka complicated..
Sent from my SM-G920F using Tapatalk
cipjanin said:
Can u explain me that?
I dont get it..
Looka complicated..
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
1. try to flash the "G920FXXU1AODG_G920FVFG1AOD1_G920FXXU1AODC_HOME.tar" in the tread with Odin
2. when Odin fails on "hidden.img" download the "my recovery" file thats in the tread(the file provided from dehnhaide) and flash it with odin then your good to go.
follow the rest of the steps with smartswitch afterwards
good luck
cipjanin said:
Can u explain me that?
I dont get it..
Looka complicated..
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
What exactly are you hoping to achieve with flashing the firmware?
if its not to solve a specific issue then stick with the firmware you have.
kimkara said:
What exactly are you hoping to achieve with flashing the firmware?
if its not to solve a specific issue then stick with the firmware you have.
Click to expand...
Click to collapse
i want newer firmware