I tried to flash 2 firmware, one italian and one, russian , and odin failed showed some errors, only passed with the original firmware which came with mine phone which is:
PDA G920FXXU1AOCV
CSC G920FGBL1AOCN
Which other firmwares, newer ofcourse can i flash with odin?
cipjanin said:
I tried to flash 2 firmware, one italian and one, russian , and odin failed showed some errors, only passed with the original firmware which came with mine phone which is:
PDA G920FXXU1AOCV
CSC G920FGBL1AOCN
Which other firmwares, newer ofcourse can i flash with odin?
Click to expand...
Click to collapse
You can flash any 920F firmware. Country does not matter. I think your issue is not with the firmware. Are you on the newest version of Odin? I have 3.10.6 and that works fine.
I have AP:G920FXXU1AOD4 CP:G920FXXU1AOD4 CSC:G920FOJV1AOD4 and tried to flash another firmware G920FXXU1AOCW to try got my SPO2 sensor to work however this ended up soft bricking my phone. I had to use KIES to reset my phone. I am using the latest ODIN however it fails on the hidden.img.
I do not want to root my phone to fix this issue.
So in short my experience is no. Others probably have had better success.
cipjanin said:
I tried to flash 2 firmware, one italian and one, russian , and odin failed showed some errors, only passed with the original firmware which came with mine phone which is:
PDA G920FXXU1AOCV
CSC G920FGBL1AOCN
Which other firmwares, newer ofcourse can i flash with odin?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...rmware-official-stock-firmware-t3086387/page7
read from post 65 -->
Japultra said:
You can flash any 920F firmware. Country does not matter. I think your issue is not with the firmware. Are you on the newest version of Odin? I have 3.10.6 and that works fine.
Click to expand...
Click to collapse
Yes i tried with 3-4 versions of odin, didnt worked...
When i try to install different firmware , the odin fails to hidden.img...
johanbiff said:
http://forum.xda-developers.com/gal...rmware-official-stock-firmware-t3086387/page7
read from post 65 -->
Click to expand...
Click to collapse
Does trip knox?
Sent from my SM-G920F using Tapatalk
cipi01 said:
Does trip knox?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
no
johanbiff said:
http://forum.xda-developers.com/gal...rmware-official-stock-firmware-t3086387/page7
read from post 65 -->
Click to expand...
Click to collapse
Can u explain me that?
I dont get it..
Looka complicated..
Sent from my SM-G920F using Tapatalk
cipjanin said:
Can u explain me that?
I dont get it..
Looka complicated..
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
1. try to flash the "G920FXXU1AODG_G920FVFG1AOD1_G920FXXU1AODC_HOME.tar" in the tread with Odin
2. when Odin fails on "hidden.img" download the "my recovery" file thats in the tread(the file provided from dehnhaide) and flash it with odin then your good to go.
follow the rest of the steps with smartswitch afterwards
good luck
cipjanin said:
Can u explain me that?
I dont get it..
Looka complicated..
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
What exactly are you hoping to achieve with flashing the firmware?
if its not to solve a specific issue then stick with the firmware you have.
kimkara said:
What exactly are you hoping to achieve with flashing the firmware?
if its not to solve a specific issue then stick with the firmware you have.
Click to expand...
Click to collapse
i want newer firmware
Related
hi all
i flashed xxkpe and tried to upgrade via samsung kies but it isnt working, what to do, it says it isnt supported...
I guess you need to unroot as well.
Hetalk said:
I guess you need to unroot as well.
Click to expand...
Click to collapse
hmm unroot via cwm recovery and than flash xxkpe cuz im still in titanium...?
Ditbardh said:
hmm unroot via cwm recovery and than flash xxkpe cuz im still in titanium...?
Click to expand...
Click to collapse
Kies won't work unless you are on stock firmware. You'll need to go back to stock firmware/kernel and then unroot.
Just unrooting won't since the issue. You'd have to refer to the stock firmware as well as kernel as told earlier.
you'd have a custom cf kernel with cwm, goto stock by flashing xxkpe starting from pit.
Press thanks if helped
iAmBalvinder said:
Just unrooting won't since the issue. You'd have to refer to the stock firmware as well as kernel as told earlier.
you'd have a custom cf kernel with cwm, goto stock by flashing xxkpe starting from pit.
Press thanks if helped
Click to expand...
Click to collapse
so all i need is to flash stock xxkpe ? cuz i did it before and when i tried to upgrade via samsung kies it sad that it isnt supported, ill try again and ill post here, thanks all
Go for your region specific firmware. Then unroot. I think there are unroot instructions on cfroot thread.
Sent from my GT-I9003 using xda app-developers app
Hetalk said:
Go for your region specific firmware. Then unroot. I think there are unroot instructions on cfroot thread.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
flashed xxkpe and before flashing it i flashed unroot zip but still cant upgrade via kies...
first update ur kies then connect ur i9003 to pc in Samsung Kies mode.but before that u must be on ur region specific rom (i.e from region in which u live) and u should not be rooted.
pratik_s said:
first update ur kies then connect ur i9003 to pc in Samsung Kies mode.but before that u must be on ur region specific rom (i.e from region in which u live) and u should not be rooted.
Click to expand...
Click to collapse
im in europe can anyone help me which firmware i must have... ?
Install your region csc if you are using multi csc
To check your csc type following code
*#272*[yourIMEI]#
Take backup before typing this code
This will erase all your data
Sent from my GT-I9003 using xda premium
Ditbardh said:
im in europe can anyone help me which firmware i must have... ?
Click to expand...
Click to collapse
You can try eithe kpq or kpu
Hey guys.
Still haven't rooted my phone and still using the ****ty stock 4.1.2.
Today I've tried to change my CSC from Bulgaria to Germany and flash 4.2.2 via OTA, but when i type *#272*(IMEI CODE)# to change the CSC, I'm getting error that says
Connection problem or invalid MMI code
Click to expand...
Click to collapse
Read a topic about putting an "," after # but still didn't worked.
Any other solutions how to fix this error?
P.S - I've tried CSC Changer app for Samsung from Playstore but it requires root for our type of firmware.
QUICK QUESTION: Can I flash official 4.2.2 Germany ROM via ODIN without rooting my phone and will this action increase my binary counter? Thanks!
Yes you can flash german firmware with odin without root. And i think it will not increase your binary counter. But maybe another member knows for sure?
Greedings
Sent from my GT-I9105P using xda app-developers app
digitaliban said:
Yes you can flash german firmware with odin without root. And i think it will not increase your binary counter. But maybe another member knows for sure?
Greedings
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
Yes flashing via odin don t increase your binary counter.
Sent from my GT-I9105P using xda app-developers app
celticbg said:
Hey guys.
Still haven't rooted my phone and still using the ****ty stock 4.1.2.
Today I've tried to change my CSC from Bulgaria to Germany and flash 4.2.2 via OTA, but when i type *#272*(IMEI CODE)# to change the CSC, I'm getting error that says
Read a topic about putting an "," after # but still didn't worked.
Any other solutions how to fix this error?
P.S - I've tried CSC Changer app for Samsung from Playstore but it requires root for our type of firmware.
QUICK QUESTION: Can I flash official 4.2.2 Germany ROM via ODIN without rooting my phone and will this action increase my binary counter? Thanks!
Click to expand...
Click to collapse
*#272*IMEI# doesnt work on jellybean.
no need for rooting to flash stock.
any official stuffs flashed with odin will not increase the binary counter.
you may need a factory reset after flashing if the product code didnt change to DBT
Okay I just flashed 4.2.2 Germany (first rom released) with odin but I'm stuck in bootloop ?!
I did everything like it shoud be! What shoud I do now?!
EDIT:
Oh, sorry. It was my fault. Hard reset and fashed it again and now everything works perfect. Thank you all, now I have 4.2.2 ))
Few days ago tried to update my galaxy to 5.1.1. from 5.0.2, just succesfully. Than i installed TWRP and Wicked firmware and from SuperSu downloaded binary for root and restated my phone. It was a last moment i have seen it booted. After that i tried so many times to flash every firmware(original for sprint) in the XDA and Odin failed. Recovery doesnt work and phone doesnt boot at all, Just download mode. Have i any chance to ressurect it?
thats what he saying while trying to boot: Kernel is not seandroid enforcing custom binary locked by FRP lock(this is what blocking flashing)
regards
What is the exact firmware version that you're using?
soooperstar said:
what is the exact firmware version that you're using?
Click to expand...
Click to collapse
g925pvpu2boh1
d1a6l0 said:
Few days ago tried to update my galaxy to 5.1.1. from 5.0.2, just succesfully. Than i installed TWRP and Wicked firmware and from SuperSu downloaded binary for root and restated my phone. It was a last moment i have seen it booted. After that i tried so many times to flash every firmware(original for sprint) in the XDA and Odin failed. Recovery doesnt work and phone doesnt boot at all, Just download mode. Have i any chance to ressurect it?
thats what he saying while trying to boot: Kernel is not seandroid enforcing custom binary locked by FRP lock(this is what blocking flashing)
regards
Click to expand...
Click to collapse
Did you try to Odin again? Try a different USB cable
Sent from my SM-G925P using Tapatalk
Soooperstar said:
Did you try to Odin again? Try a different USB cable
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
yes, diff computers and cable, many times i tried to Odin with a OF7 and OH1 firmwares and stock recovery, nothing helps
d1a6l0 said:
yes, diff computers and cable, many times i tried to Odin with a OF7 and OH1 firmwares and stock recovery, nothing helps
Click to expand...
Click to collapse
Are you able to boot into stock recovery? You do have the sprint s6 edge right?
Sent from my SM-G925P using Tapatalk
Soooperstar said:
Are you able to boot into stock recovery? You do have the sprint s6 edge right?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
nope, stock recovery flashing just freezing in process
Soooperstar said:
Are you able to boot into stock recovery? You do have the sprint s6 edge right?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
nope, stock recovery flashing just freezing in process. s6 edge sprint
d1a6l0 said:
nope, stock recovery flashing just freezing in process. s6 edge sprint
Click to expand...
Click to collapse
Are you using Odin 3.10.6?
Sent from my SM-G925P using Tapatalk
Soooperstar said:
Are you using Odin 3.10.6?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
3.10.6 and 3.10.7
d1a6l0 said:
nope, stock recovery flashing just freezing in process
Click to expand...
Click to collapse
But can you boot into recovery?
Sent from my SM-G925P using Tapatalk
Soooperstar said:
But can you boot into recovery?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
no
I am familiar with what you're talking about. My girlfriend's phone had the frp message but I was able to Odin the firmware to fix it
Sent from my SM-G925P using Tapatalk
Soooperstar said:
I am familiar with what you're talking about. My girlfriend's phone had the frp message but I was able to Odin the firmware to fix it
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
But none of stock firmaware are able to fix my proble. Its confusing me, coz it helps everybode, except me
d1a6l0 said:
But none of stock firmaware are able to fix my proble. Its confusing me, coz it helps everybode, except me
Click to expand...
Click to collapse
And me... I am in the same boat as you. If you happen to find a fix could you let me know? If I find one I'll help you out as well.
Emadness said:
And me... I am in the same boat as you. If you happen to find a fix could you let me know? If I find one I'll help you out as well.
Click to expand...
Click to collapse
His issue is different from yours. His is the frp oem lock being on. Which is something totally different
Okay guys, i manage to fix it. Just took AP from stock OH1, separeted it to pices(boot, system etc) and flashed manualy one by one succesfully! Victory!
Im having the same problem now. What do you mean you flashed piece by piece?
Soooperstar said:
His issue is different from yours. His is the frp oem lock being on. Which is something totally different
Click to expand...
Click to collapse
Here ya go OI1
http://forum.xda-developers.com/showthread.php?t=3219484
I too cannot get iinto recovery.. it just hangs after flashing stock. I can only do odin and it always fails on sboot with a nand fail SW REV DEVICE4 BINARY3 or a failed Sec CHeck [BOOTLOADER]
The link for the ol1 is broke....
Please help.. This is my only line for business and I just got home from a stay at club fed and REALLY need this work.....Google my username if you wanna know....
i flashed my s6 with cyanogenmod 13 it flashed correctly but it has some problem so i want to go back to my stock rom i tried to install stock rom using odin but it fails at sboot.bin
what can i do to fix it
j._.junior said:
i flashed my s6 with cyanogenmod 13 it flashed correctly but it has some problem so i want to go back to my stock rom i tried to install stock rom using odin but it fails at sboot.bin
what can i do to fix it
Click to expand...
Click to collapse
Maybe the bootloader in what you are flashing is older than your current bootloader and it's blocking it from flashing, you can't downgrade bootloader on most Samsung devices that have Android 4.3 or newer.
Or maybe you need to flash your stock kernel by itself and then flash the complete firmware.
Sent from my SM-S903VL using Tapatalk
how to flash stock kernel
Can u plzz tell me how to flash stock kernel for my s6 SM-G929F
j._.junior said:
Can u plzz tell me how to flash stock kernel for my s6 SM-G929F
Click to expand...
Click to collapse
Download your stock firmware then extract the kernel from it, then flash the extracted kernel. You're looking for the zimage.
Sent from my SM-S903VL using Tapatalk
Thanks
Thank u so much droidriven i will try it as soon as my laptop returns from repair
j._.junior said:
Thank u so much droidriven i will try it as soon as my laptop returns from repair
Click to expand...
Click to collapse
You will have to convert the kernel to a .tar or .tar.md5 to flash it with Odin, flash it in the AP slot.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
You will have to convert the kernel to a .tar or .tar.md5 to flash it with Odin, flash it in the AP slot.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Yes i saw a tutorial on youtube on flashing a stock kernel
I will follow the steps as shown
Another question
j._.junior said:
Yes i saw a tutorial on youtube on flashing a stock kernel
I will follow the steps as shown
Click to expand...
Click to collapse
Droiddriven i need another favour from you
I recently brought a sm-g920x (which is a demo unit)
I got it with no operating system and i want to install one on it but which stock rom should i install
I have no idea about it would you please tell me
Thank you
j._.junior said:
Droiddriven i need another favour from you
I recently brought a sm-g920x (which is a demo unit)
I got it with no operating system and i want to install one on it but which stock rom should i install
I have no idea about it would you please tell me
Thank you
Click to expand...
Click to collapse
Read this thread, it should have the information you need.
https://forum.xda-developers.com/galaxy-s6/general/g920x-master-thread-guides-firmwares-t3267738
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Read this thread, it should have the information you need.
https://forum.xda-developers.com/galaxy-s6/general/g920x-master-thread-guides-firmwares-t3267738
Click to expand...
Click to collapse
Should i download the file with removed cm.bin parabin hidden.img and sboot.bin?? @Droidriven
Hi all
I have this problem and irty to download last firmware on sammobile
And use odin last v
It stops set pit file.
I use 3 different firmware same brainy
Not accept flashing
Sent from my INE-LX1 using Tapatalk
Same problem to me . Is there any solution????
helpozedi said:
hi all
i have this problem and irty to download last firmware on sammobile
and use odin last v
it stops set pit file.
I use 3 different firmware same brainy
not accept flashing
sent from my ine-lx1 using tapatalk
Click to expand...
Click to collapse
any solution ??
helpozedi said:
Hi all
I have this problem and irty to download last firmware on sammobile
And use odin last v
It stops set pit file.
I use 3 different firmware same brainy
Not accept flashing
Sent from my INE-LX1 using Tapatalk
Click to expand...
Click to collapse
same here, could be a pit problem?