GOF2HD and TF700KL - Asus Transformer TF700

So i decided to play GoF2HD.Play market displays that it is compatible with my device (Asus Transformer Pad TF700KL). But when i start the game, after ten seconds display goes black and no sound is played. Any ideas how to fix it?
After the last update now screen just freezes.

Related

[Q] Prime 1.7 strange problem

ASUS Transformer Prime 1.7
I have a strange problem. When I turn screen off then back on, I do not see the lock screen. There is also another problem when I press the home button so it does not work. Should a re-install?
prime 1.8 will be released soon but i would try a wipe and reinstall if you cant wait

[Q] Odd glitch or feature?

I have a shiny new Pad 300 and I've noticed an oddity with the up arrow on the keypad. If I keep it pressed then the pad cycles through switching the trackpad off, taking a screen shot, switches off the wifi, starts playing the last music track, and then locks the pad.
It's not a deal breaker just odd.

screen malfunction!?

Dear All,
I just came across with the screen problem, just wondering if anyone had this problem or not.
The pad was connected to a power supply when this video was shot, then i disconnected the usb power supply and it went normal again, so i am wondering if this problem or malfunction got anything to do with charging up the pad at the same time...
Third party keyboard
http://www.youtube.com/watch?v=JI45FkFOQUI
ASUS stock swipe keyboard
http://www.youtube.com/watch?v=K6GiW8WdwRY

[Q] TF300TG crashes sometimes when dock is reattached, normal?

My TF300TG is on stock rom Jelly Bean from LG after OTA update (4.1.1, JRO03C.WW_epad-10.4.3.9-20121106) and sometimes it crashes while reattaching it to the dock. The screen gets black all of a sudden and I have to press the power button ~10 sec to reset it. Afterwards I can boot again.
Is this 'normal' behaviour or should I redeem it? I would like to know before I unlock my bootloader and loose asus support.

[Q] Touchscreen re-calibration?

Hi all - my TF700 has been solid for about 9 months, but this past weekend the touchscreen started getting wonky and now it will work for 5-10 seconds and then not register any touches, until the power button is toggled to put it to sleep and then wake up and go through the process again. In my research, it appears as if this can be addressed through recalibration of the Touchscreen.
However, I don't even know if that's possible with my current stock/rooted setup. I did try booting into recovery, but I saw the RCK/Android/Wipe Data prompts, and didn't want to go anywhere without knowing what each would do. I'm guessing maybe the Android button, but I'm not sure.
Is there an easier way to recalibrate the touchscreen without doing a factory reset, or going to a new ROM yet?
Thanks!
This may be a hardware problem with the digitizer going bad. I would contact Asus, they probably will recommend a factory reset and you should try that anyway.
But a custom rom will not take care of this problem - at least I do not think this is software related....
Good that you are still under warranty!
FYI:
RCK will boot into the stock recovery which will not do anything unless you have an update file downloaded somewhere on your storage - it'll just show you an Android falling over with it's belly open a ! triangle. Scary if you don't know what it is! LOL
Android will boot you back into your system. This is a so called 'cold boot' and you could try that. I doubt it'll help, but it won't hurt either.
Wipe Data does exactly what it says. You better have everything you care about backed up before you execute that command.
You use the Volume Down button to navigate between the icons and the Volume Up to execute.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Hmmm. after enabling Developer mode (so I could d a Titanium backup), I decided to enable the touch sensing, and what I've found is that it appears as if there is a spot in the northeast quadrant (while holding vertically, with buttons on the right/dock connector on the left) that gets stuck in the 'touched' sense (the little dot sticks, and in the kindle reader, it acts like the text is selected).
Sometimes it gets unstuck when pressing the power button to sleep, and then re-logging in via the lockscreen code I have set. Sometimes it doesn't. I guess I'll contact support and see if I can capture it on video with my phone.
Pyperkub said:
Hmmm. after enabling Developer mode (so I could d a Titanium backup), I decided to enable the touch sensing, and what I've found is that it appears as if there is a spot in the northeast quadrant (while holding vertically, with buttons on the right/dock connector on the left) that gets stuck in the 'touched' sense (the little dot sticks, and in the kindle reader, it acts like the text is selected).
Sometimes it gets unstuck when pressing the power button to sleep, and then re-logging in via the lockscreen code I have set. Sometimes it doesn't. I guess I'll contact support and see if I can capture it on video with my phone.
Click to expand...
Click to collapse
Pyperkup,
Did you ever resolve this issue? I'm experiencing the Very same issue on my TF700T.
Thanks
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
calvinb1 said:
Pyperkup,
Did you ever resolve this issue? I'm experiencing the Very same issue on my TF700T.
Thanks
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
Had to send it in on warranty.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

Categories

Resources