On my Galaxy Fit when is shoot down have the dots on the display. They are rough to the touch. I don't know why. Please help.
Is it completely shut down or the backlight display just b4 shut down...??
Btw I see only a single dot at the top right of the boot-up screen that only appears when I flash cmx rom...
Galaxy_Rohit said:
Is it completely shut down or the backlight display just b4 shut down...??
Btw I see only a single dot at the top right of the boot-up screen that only appears when I flash cmx rom...
Click to expand...
Click to collapse
In both cases the same. Now you can see better.
ZmisiS said:
In both cases the same. Now you can see better.
Click to expand...
Click to collapse
:what:Then I guess either ur screen guard(if any...) is dusty... or something has gone under ur LCD.
coz pixels(defective or normal) don't shine after phone has shut down.
Galaxy_Rohit said:
:what:Then I guess either ur screen guard(if any...) is dusty... or something has gone under ur LCD.
coz pixels(defective or normal) don't shine after phone has shut down.
Click to expand...
Click to collapse
Not dust, but I think it is a damage, but have no idea how it happened. I'm always careful to avoid damage.
I have the same problem. It is from home/car keys, metalic stuff, metal on the jeans/pocket.
They are tinny cracks in the screen. Hope they don't spread and eventually break
Lawr3nce said:
I have the same problem. It is from home/car keys, metalic stuff, metal on the jeans/pocket.
They are tinny cracks in the screen. Hope they don't spread and eventually break
Click to expand...
Click to collapse
I never wore a cell phone in contact with the listed. I was very careful with it.
Maybe they're dead pixles
samo_gf said:
Maybe they're dead pixles
Click to expand...
Click to collapse
Screen is O.K. Not white, blue, green and red dot.
Like a follow poster already said: When you shut off the phone, these dots shouldn't be visible unless it is a physical damage.
Or dust. You prob. have to clean or replace the screen then.
Junnix said:
Like a follow poster already said: When you shut off the phone, these dots shouldn't be visible unless it is a physical damage.
Or dust. You prob. have to clean or replace the screen then.
Click to expand...
Click to collapse
Yes, it is physical damage. Not dust, clean don't help. I must replace screen. I do not know how these damages.
U might also know that buying a new phone is much better than replacing lcd.
Galaxy_Rohit said:
U might also know that buying a new phone is much better than replacing lcd.
Click to expand...
Click to collapse
I think, I'll buying new phone. I like Windows 8 Phone, and I'll buying Huawei Ascend W1.
As for me...I don't like Windows phone coz I don't think that there would b much customisations or open sourcing in Windows as we have for Android...but it's my opinion bro
Galaxy_Rohit said:
As for me...I don't like Windows phone coz I don't think that there would b much customisations or open sourcing in Windows as we have for Android...but it's my opinion bro
Click to expand...
Click to collapse
Windows Phone 8 have all what I need. Almost all of the applications that I use on Android have its equivalent for Windows Phone.
As for the phone, I think it has very good features for its price.
Thanks for opinion and I respect your opinion, and about the taste is not discussed.
Related
Hey everyone,
I just noticed something weird on the screen of my xoom (with the screen off it's much more visible). I can see some strange "squares" filling the whole screen when looking at it from a low angle and I can't remember if it was there since I got th device... so I don't know wheter it's normal or not. Do you see such signs on your xoom too?? Or should I ask for a replacing unit? Mmm.
What I see looks slightly like this: h**p://ny-image0.etsy.com/il_170x135.214590012.jpg (sorry, can't post external links yet)
I hope someone can help me
Thanks!
Yuvi
I havnt seen your picture but does it look like its image, as in displayed on the pixels or physical. It could st be the mesh of te touch panel, for e.g. on my desire I can see a diamond shaped mesh in sun light. Can't see anything on my xoom screen though, but its got the crappy factory screen cover on still.
Macbots drool as I XOOM through the Galaxy to my hearts Desire on the back of a Droid.
Yeah it's there on mine too, I also noticed it when I first got it. I'm not 100% sure what it is, but I'm assuming it's related to the capacitive screen.
Its the touch screen digitizer.
Sent from my SPH-D700 using XDA Premium App
Kcarpenter said:
Its the touch screen digitizer.
Click to expand...
Click to collapse
Thanks for the info. Do you think then that it's normal that it's visible?
I searched around and found this link h**p://ezinearticles.com/?Touchscreen-Digitizer---Symptoms-and-Cheap-Replacements&id=6047548 where it says:
Usually, the digitizer is not visible unless the screen has been damaged or cracked.
Click to expand...
Click to collapse
mmm....so maybe I should try to get a replacement device? (
Yuvi
yuvidroid said:
Thanks for the info. Do you think then that it's normal that it's visible?
I searched around and found this link h**p://ezinearticles.com/?Touchscreen-Digitizer---Symptoms-and-Cheap-Replacements&id=6047548 where it says:
mmm....so maybe I should try to get a replacement device? (
Yuvi
Click to expand...
Click to collapse
It's normal that you should see a glint of it in light, don't worry about it, nothing wrong with it unless u can see it straight on in any light.
alias_neo said:
It's normal that you should see a glint of it in light, don't worry about it, nothing wrong with it unless u can see it straight on in any light.
Click to expand...
Click to collapse
I can see it pretty easily in my room without any particular/strong light...even when the screen is on it's quite visible. Grrrrrrrrr
yuvidroid said:
I can see it pretty easily in my room without any particular/strong light...even when the screen is on it's quite visible. Grrrrrrrrr
Click to expand...
Click to collapse
Go exchange it for a new one
We have 4 Xoom's in our office and you can see it on all of them when the screen is off - and the light is on. But we are software developers, we live in the dark so it's hard to see most of the time.
After getting throught this problem http://forum.xda-developers.com/showthread.php?t=1644971 I got another one. My device felt down and now I got a small "slot" bbetween the display and the chassis. But thats not the only problem. The touchscreen (digitizer ??) does not work well. The four "onscreen" buttons dont work and about a quarter inch above them the screen doenst react well, sometimes it does, most of the tim not. I want to repair it by myself but I do not know much about it. I know how to assemble and disassmble, but thats it. Is this http://www.ebay.de/itm/270933343810 the part I have to change? Or is there even more or an other part?
Thank you so much guys!
I disassemled the hole thing now and I can see that there's a mini-crack in the lcd at the top right. No matter for the display at the moment. It must be the digitizer?! Is it possible that it is broken, while I cannot see a damage onit?
yxcv99 said:
I disassemled the hole thing now and I can see that there's a mini-crack in the lcd at the top right. No matter for the display at the moment. It must be the digitizer?! Is it possible that it is broken, while I cannot see a damage onit?
Click to expand...
Click to collapse
this is the part you need http://www.ebay.de/itm/LCD-Display-...75910021?pt=Handy_Zubehör&hash=item337330cc85
thats the whole assembly otherwise you will find it really hard because the touch screen digitizer and the main screen are together attatched.
Yesss baby! I replaced the digitzer and it works fine again.
This thread can be removed ;-).
yxcv99 said:
Yesss baby! I replaced the digitzer and it works fine again.
This thread can be removed ;-).
Click to expand...
Click to collapse
edit the title of your thread and adds solved at the start
Sent from a Desire S waiting for Kernel 3. WAKE UP HTC!!!!
Hey
few days ago my HOX ATT fall down. all the buttons were ok but after some days they had stopped working. i have tried to do factory reset but it didnt helped. all the touch screen works but the buttons not. i sent the HOX to Repair shop and they told me they have not seen thing like this before that only part of the touch digitizer working.
can you help me solve the problem?
Thanks.
The fact that the repair shop has never seen it before, does that mean they won't even try to fix it?
He said that he need to order this part to fix it and he even not sure that it will work.
is this hardware problem?
guybor97 said:
is this hardware problem?
Click to expand...
Click to collapse
Since you dropped the phone recently, I'd be inclined to say yes.
I'd try to RUU, and if the problem persists, its probably a hardware failure caused by the drop.
redpoint73 said:
Since you dropped the phone recently, I'd be inclined to say yes.
I'd try to RUU, and if the problem persists, its probably a hardware failure caused by the drop.
Click to expand...
Click to collapse
Ok
is it good ?
http://www.ebay.com/itm/New-OEM-Dig...e_Replacement_Parts_Tools&hash=item1e7c1578c1
guybor97 said:
Ok
is it good ?
http://www.ebay.com/itm/New-OEM-Dig...e_Replacement_Parts_Tools&hash=item1e7c1578c1
Click to expand...
Click to collapse
Please search the forums regarding LCD changing. It's not an easy task.
http://forum.xda-developers.com/showthread.php?t=1720900
You must buy the entire LCD - Digitizer -light guides bundle . It's almost impossible to separe the screen from the LCD, so buying the digitizer is a waste of time if you dont have the LCD.
javierarenas said:
Please search the forums regarding LCD changing. It's not an easy task.
http://forum.xda-developers.com/showthread.php?t=1720900
You must buy the entire LCD - Digitizer -light guides bundle . It's almost impossible to separe the screen from the LCD, so buying the digitizer is a waste of time if you dont have the LCD.
Click to expand...
Click to collapse
the same thing for me, i have tryed everithing and not fixed yet, in a few weeks you will see how other parts in the touch screen will not work too.
As javierarenas has said, Purchasing the digitizer alone is a bad idea. Nearly impossible is an understatement. even with a heat gun and an unlimited amount of patience you would be lucky to separate the digitizer from the LCD.
As Redpoint said, if RUU doesn't fix it, you will need a new screen.
Take the phone apart prior to buying the screen. Check the colors of the ribbon cable and try to find the EXACT same screen. This will save you a lot of trouble. Make sure to keep the old screen in case you need to sync the new screen otherwise you are totally screwed.
Good luck.
I tried taking apart my phone and it was not an easy task.....AT ALL! MAKE SURE TO BE PATIENT!
-Sugardaddy
Arrow44 said:
I tried taking apart my phone and it was not an easy task.....AT ALL! MAKE SURE TO BE PATIENT!
-Sugardaddy
Click to expand...
Click to collapse
Funny thing is I never had to take mine apart. But did have to reattach the screen, sat down with phone in back pocket and when I pulled it out it had separated the screen from body and had to use some iPhone screen double sided tape to glue back down.
Sent from my HTC One XL using xda premium
I have separated before minutes the digitizer from LCD and i dont see any broken or wrong with LCD.
What is the reason to not see a Lighting when put to charge? Is that a software problem/missing?
https://drive.google.com/file/d/0Bxome1ZSCRIaYTN4Y1JOc25XTTg/view?usp=sharing
https://drive.google.com/file/d/0Bxome1ZSCRIaMFNycS1oazJ2SWM/view?usp=sharing
Thanks in advance
diretouch said:
I have separated before minutes the digitizer from LCD and i dont see any broken or wrong with LCD.
What is the reason to not see a Lighting when put to charge? Is that a software problem/missing?
https://drive.google.com/file/d/0Bxome1ZSCRIaYTN4Y1JOc25XTTg/view?usp=sharing
https://drive.google.com/file/d/0Bxome1ZSCRIaMFNycS1oazJ2SWM/view?usp=sharing
Thanks in advance
Click to expand...
Click to collapse
have you tired to enter download mode or heaweis equivalent
or recovery
was it rooted
kinda need a little back story here
I work in service and the truth is i dont even remember if the display was showing correct, but maybe it was.
I have purchased digitizer and lcd from Ali and the digitizer is in me > just wanted to make the phone full functional.
What key combinations to try?
Is there the possibility that the display foil has gone off with the glass?
2011andre2 said:
Is there the possibility that the display foil has gone off with the glass?
Click to expand...
Click to collapse
Maybe really something is gone or broken with my separation but if i dont see new y511 lcd and separate it with mine i cant tell.
I really dont see nothing wrong.
Will try some key combination....
Keys for Hard reset dont have effect.
Next move?
Hi all...
Could you check one thing for me pls?
Put your OP6 on a hard surface like a study table(mine is made of wood) and charge it. Take off any case etc. Also without any shoes or slippers etc.
Then run your fingers along the sides i.e. along the metal frame while it's charging.
Do you feel like a hint of current/electricity on your fingers?
I feel like the minutest of minute vibration while running my fingers.
But only when it's on a hard surface.
When I hold it in my hands, I don't feel anything.
Please kindly do this test and tell me.
Thank you.
Xebeck said:
Hi all...
Could you check one thing for me pls?
Put your OP6 on a hard surface like a study table(mine is made of wood) and charge it. Take off any case etc. Also without any shoes or slippers etc.
Then run your fingers along the sides i.e. along the metal frame while it's charging.
Do you feel like a hint of current/electricity on your fingers?
I feel like the minutest of minute vibration while running my fingers.
But only when it's on a hard surface.
When I hold it in my hands, I don't feel anything.
Please kindly do this test and tell me.
Thank you.
Click to expand...
Click to collapse
Just tested it the way your described me too and didn't notice anything. Wooden desk as well.
Solution6996 said:
Just tested it the way your described me too and didn't notice anything. Wooden desk as well.
Click to expand...
Click to collapse
.
Thanks..
But were you bare feet...
Without shoes or slippers... With slippers on, I don't feel anything as well...
And while running the fingers along the Metal frame/side.
Cheers
are you licking a 9V battery with your other hand?
cliffr39 said:
are you licking a 9V battery with your other hand?
Click to expand...
Click to collapse
.
Was that a joke?
Of course not, I wasn't...
That happens with MacBook too! I mean thats electrical discharge / leakage. Thats pretty normal. You might get a minor shock if you lick the metallic contacts or if the same comes in contact with your sensitive areas like elbow, belly and below that
Relax!
askrpro said:
That happens with MacBook too! I mean thats electrical discharge / leakage. Thats pretty normal. You might get a minor shock if you lick the metallic contacts or if the same comes in contact with your sensitive areas like elbow, belly and below that
Relax!
Click to expand...
Click to collapse
.
.
So do I need to replace it...
Xebeck said:
.
.
So do I need to replace it...
Click to expand...
Click to collapse
Not at all.
Same happens on my OP3, but it stopped after few months randomly. I think you shouldn't get the replacament unit, or at least i didn't because i don't live in a country that oneplus is officially selling devices, if you do and it's not much pida, go ahead, but you might get the same resultl lol
askrpro said:
Not at all.
Click to expand...
Click to collapse
Imotep95 said:
Same happens on my OP3, but it stopped after few months randomly. I think you shouldn't get the replacament unit, or at least i didn't because i don't live in a country that oneplus is officially selling devices, if you do and it's not much pida, go ahead, but you might get the same resultl lol
Click to expand...
Click to collapse
.
.
Basically
I just wanna know if this extra current can affect my OP6 or not?
Like battery life or circuits in the mother board etc...
Cheers
I got it replaced and it's working fine now...