Database Info

Cracked Screen on my Touch Pro

I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)

Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.

How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?

Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!

I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!

3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!

a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.

maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!

solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper

If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050

-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.

maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.

I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?

Chances that an LCD + digitizer will fix this?

A coworker I started working with a few months ago told me about the much-better Sensation he had before his MyTouch 3G. It seems that he still had it, but stopped using it "because the screen cracked." I correctly surmised that it was a simple and cheap to replace touch screen digitizer and described to him that it was "just the glass cover" and that it was "cheap to replace." I have done many such repairs on other phones and gadgets.
He then told me that he had continued to use it until the LCD went blank. There is no reason to think that the LCD inside suddenly cracked, but I can only assume that it also sustained some kind of damage and now also requires replacement. Knowing that the LCD isn't cracked, what are the chances that a replacement LCD + digitizer will restore the phone? I'm concerned because we've already purchased a kit for $65.

Nobody can tell you that off the internet. If we do, that would be pure guess, just as accurate as you would have guessed.

sawo said:
Nobody can tell you that off the internet. If we do, that would be pure guess, just as accurate as you would have guessed.
Click to expand...
Click to collapse
Well, someone could have had the exact same problem and already tried it. I ran into people with the same problem already. I'm just looking for more because some, no doubt, have tried it and others may have an alternate explanation. Reasonable.

there is a good chance that will fix the problem. but since the LCD was working for a while until it blank out, it is possible the problem might be with the circuit board. only way to know is to try it out.

CZroe said:
Well, someone could have had the exact same problem and already tried it. I ran into people with the same problem already. I'm just looking for more because some, no doubt, have tried it and others may have an alternate explanation. Reasonable.
Click to expand...
Click to collapse
The LCD could go blank for several reasons. Faulty LCD, loose cable, faulty board etc. etc. Even if someone had the same problem, the reason for it could be completely different, thefore this wont help you at all except for giving you hope. If this is what you need, then i would say "yes, the change of lcd & digitizer should fix the problem" but you never can be sure unless you try When you start the phone, do you hear the startup sound? This could at least indicate that the phone isnt completely faulty.

brabusamg55 said:
there is a good chance that will fix the problem. but since the LCD was working for a while until it blank out, it is possible the problem might be with the circuit board. only way to know is to try it out.
Click to expand...
Click to collapse
The plus side is that you can't make it worse. So you've got nothing to lose by trying to repair it, other than the few bucks for the parts.

Well, I took it apart to re-seat all the cables and it's still blank. Reading online, I see that a lot of dropped Sensations/Pyramids develop a loose/broken SMT capacitor component near the headphone jack, but I'm not registered on any of the forums I see it discussed on and I can't see the pics. They describe a slightly different problem anyway (screen goes blank after standby). I needed sleep, so I put it all back together and I'll check that out when the parts get here. My hunch is that the LCD panel is fine and that I'll have an extra, assuming the capacitor problem is fixable. I've done some delicate soldering work before but I can't really say that I'm good at it! I didn't see any loose SMT components rattling around so I hope it didn't fall completely out somewhere.
Skipjacks said:
The plus side is that you can't make it worse. So you've got nothing to lose by trying to repair it, other than the few bucks for the parts.
Click to expand...
Click to collapse
Thanks but it's almost $70 for the parts.

Works great! Well, it had the touchscreen sensitivity issue pretty badly but the T-Mobile OTA update fixed that. Transferring all the adhesive bits from one screen to another was down-right frustrating, but I pulled it off and I only see a single spec of dust inside. The dude will be thrilled. I broke the earhook on my Looxcie so I did not make a video but it was full of me tearing and ripping the things anyway and not a good example of how it should be done!
FWIW, there was no way to remove the old screen without denting up the backing plate and prying the heck out of it to free it from multiple adhesives and glues, so I would not have had two good LCDs after testing the replacement even if there was nothing wrong with the original. Good thing it was the LCD at fault! I didn't have to drill anything like the glass replacement video I watched instructed me to do. They didn't realize that the LCD removal allows the flex PCB through just fine. I forgot to thread it back through before seating the replacement LCD in the adhesives and tape left-overs but it flexed enough to allow it through without removing, which was quite a relief after seeing how the original fared after being removed.

HTC Sensation Screen replacement

Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks

Off course HTC will repair it, but it'll take longer and probably charge you a lot more than what you can it fixed for.

Out of curiosity do you/your girl not put the phone in a case or something?

nba1341 said:
Out of curiosity do you/your girl not put the phone in a case or something?
Click to expand...
Click to collapse
Haha, no i did not.. But as soon as i get it fixed im gunna invest in a bulletproof / bombproof carbon kevlar box and keep it locked inside it !!!

Was it bought through a carrier or sim free? Could always take it to your carrier and see what they suggest, although they're not normally the cheapest, but at least it should get done properly.

Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en&currency=GBP&products_id=4769
opinions ??

No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
azzledazzle said:
Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en&currency=GBP&products_id=4769
opinions ??
Click to expand...
Click to collapse

joe.attaboy said:
No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
Click to expand...
Click to collapse
I totally agree with you !! i do not want to result to fraudulent behaviour... BUT, i dont want to pay approx £80 for parts and make the whole situation worse by possibly making more damage.
BUT i also dont want to pay approx £150 - £200 thinking i could of fixed it for much less by doing it myself.
I am good with stuff like that and am very gentle and careful..... but i dont believe in myself lol

I recently replaced mine. Its not too terribly hard to do. But you have to get it just right. Currently the digitizer is a bit slow and unresponsive at time but I think i didnt get it in there completely right. So I'm going to dissaimble is again today and get it suck in better and see of that helps
Sent from my cm_tenderloin using Tapatalk

Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.

silentsnow31802 said:
Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.
Click to expand...
Click to collapse
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592

dgenx210 said:
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592
Click to expand...
Click to collapse
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.

silentsnow31802 said:
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.
Click to expand...
Click to collapse
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e

dgenx210 said:
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e
Click to expand...
Click to collapse
I dont even have a battery for it at the moment. When the battery arrives ill check it out. I have a feeling im not going to be able to get ADB working though.

I bought this!
http://www.ebay.com/itm/260959508044?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Ill let you all know how it turns out....

Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.

silentsnow31802 said:
Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.
Click to expand...
Click to collapse
Glad you finally got it sorted. Welcome back to you then

azzledazzle said:
Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks
Click to expand...
Click to collapse
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that

mckellick said:
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that
Click to expand...
Click to collapse
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!

azzledazzle said:
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!
Click to expand...
Click to collapse
Lol yeah I bet they do..but most of the insurance phones you get after your device breaks are refurbished. Cheap beat up and abused.. then recycled.. lol that sounded like a lifetime channel movie. Well I hope your back up and running again..and how'd that tile doing? Cheers mate
Sent from Xparent Cyan Tapatalk HTC Sensation 4G with Beats and a kickass Rom

Screen replacement problems

Hey everyone,
I recently bought my HOX at my local AT&T store about a month ago and managed to drop within the first 2 weeks I had it, and break both the glass and LCD. I went on ebay and bought both the LCD and glass together and installed it on my phone with no luck. Screen is totally black with no response. Everthing else works flawlessly, vibrator, capacitive buttons, and speaker. The aftermarket LCD screen's cable was straight so I had to make a fold in it like the original cable was. I worry that that might be what the problem is, though I highly doubt it. I would appreciate it greatly if someone could give me some advice on what I should do at this point. Return the LCD and glass or try something else. Thanks

hatchman16 said:
Hey everyone,
I recently bought my HOX at my local AT&T store about a month ago and managed to drop within the first 2 weeks I had it, and break both the glass and LCD. I went on ebay and bought both the LCD and glass together and installed it on my phone with no luck. Screen is totally black with no response. Everthing else works flawlessly, vibrator, capacitive buttons, and speaker. The aftermarket LCD screen's cable was straight so I had to make a fold in it like the original cable was. I worry that that might be what the problem is, though I highly doubt it. I would appreciate it greatly if someone could give me some advice on what I should do at this point. Return the LCD and glass or try something else. Thanks
Click to expand...
Click to collapse
Welcome, search the forum. Long story short, call HTC and have them fix it for ~$220

If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.

SBA1226 said:
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
Click to expand...
Click to collapse
still gonna cost 200$ to replace with AT&T with insurance. but maybe the person there will be nice who knows.

SBA1226 said:
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
Click to expand...
Click to collapse
Thanks for the quick responses, looks like im gonna have to bite the bullet and pay the $220 bucks. AT&T has terrible customer service and they had no interest in helping me.

still not fixed
Hello again,
I recently bought another replacement LCD and digitizer. Installed it in the phone still with no luck. Everything except the screen works perfectly. All the connectors and motherboard look perfect. I have called HTC and there have some of the worst tech support that I have ever experienced. Please respond...im running out of ideas.

hatchman16 said:
Hello again,
I recently bought another replacement LCD and digitizer. Installed it in the phone still with no luck. Everything except the screen works perfectly. All the connectors and motherboard look perfect. I have called HTC and there have some of the worst tech support that I have ever experienced. Please respond...im running out of ideas.
Click to expand...
Click to collapse
I`ve got the same problem. Have you found a solution?

we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium

ptesmoke said:
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
no :-/

Try both the old one and the new one without placing it into the housing...
The problem you will face most is with the LCD strip which has to be inserted fully in the slot..
Which is very difficult to do so and needs lots of time on it...
see some Replacement videos on Youtube. It do show you step by step guide on replacing the LCD..
Just place the battery and all the connectors and try powering it on b4 inserting it into the housing..

ptesmoke said:
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
XtR3m3R said:
no :-/
Click to expand...
Click to collapse
Ya, that slight pinch you felt during the install......that was your $500's last words

bondarun said:
Try both the old one and the new one without placing it into the housing...
The problem you will face most is with the LCD strip which has to be inserted fully in the slot..
Which is very difficult to do so and needs lots of time on it...
see some Replacement videos on Youtube. It do show you step by step guide on replacing the LCD..
Just place the battery and all the connectors and try powering it on b4 inserting it into the housing..
Click to expand...
Click to collapse
The old LCD isn`t working anymore. The LCD Connection is fully inserted. First time i started the device with the new LCD, everything was working well. A few seconds later i got the blackscreen.

XtR3m3R said:
The old LCD isn`t working anymore. The LCD Connection is fully inserted. First time i started the device with the new LCD, everything was working well. A few seconds later i got the blackscreen.
Click to expand...
Click to collapse
May be its an Hardware issue...
Try plugging in the display alone not the digitizer cable..
Give a try..

18th.abn said:
Ya, that slight pinch you felt during the install......that was your $500's last words
Click to expand...
Click to collapse
Did he pretty much fry the whole thing?

No, he's getting it to boot I believe just no screen..
Try plugging into the pc and make sure it's being recognized.
Sent from my HTC One XL using Tapatalk 2

18th.abn said:
No, he's getting it to boot I believe just no screen..
Try plugging into the pc and make sure it's being recognized.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Yeah i think the new LCD is broken. With a flashlight i can see Android on the screen
So i think the backlight is broken. So i will repair the phone with a new Display and Digitizer Unit. Right?

I tried the same thing, but mine was just the glass. Forget about trying to separate LCD from glass, really you are not that skilled (any of you!). anyway, It was about 45 days after receiving my HOX and I called ATT and just told them what happened and that my phone was in 1000 pieces, said I now have a contract and no phone (though I was much more miserable and depressed sounding at the time). She said "no problem, I will just toss out this old contract and we will start from scratch" It cost me another $99 but they sent me a brand new phone. I was shocked. First time a carrier ever made me smile (other than running LTE Speed Tests)

XtR3m3R said:
no :-/
Click to expand...
Click to collapse
i don't know i can't speak

Micro oxidation scratches

I've got some scratches on the back of my One S. Its a replacement I got from HTC last week and just two days later I managed to get two scratches on them without doing anything . I've looked at this forum http://forum.xda-developers.com/showthread.php?t=1589364 but the only solution there is to replacement the back cover, which I'm not too keen on doing as its risky. Is there any kind of polish I can use to get rid of these scratches. Also I'm not sure but it seems the actual housing is flawed because my original handset never managed to get any scratches whatsoever but this one seems to scratch way too easily. Maybe this replacement is from the earlier handsets.

It does appear that they've given you an awful handset. I've had mine for a year, never used a case and I have one little chip around the charger port, and that is it. I'm not sure if HTC will do anything, but it's best to get in contact first.

kylepont said:
It does appear that they've given you an awful handset. I've had mine for a year, never used a case and I have one little chip around the charger port, and that is it. I'm not sure if HTC will do anything, but it's best to get in contact first.
Click to expand...
Click to collapse
Yeah I agree and I did contact them and they said its not covered in the warranty and they'll charge me for a repair .

lonegunman0 said:
Yeah I agree and I did contact them and they said its not covered in the warranty and they'll charge me for a repair .
Click to expand...
Click to collapse
I've found in previous experiences with the HTC support team that you have to be very, very forceful with them. If I was in your situation, the right thing to respond would be to turn the blame on them for not electrocuting it properly. Just remember that the customer is always right, they normall let up after a good fifteen to twenty minutes.

kylepont said:
I've found in previous experiences with the HTC support team that you have to be very, very forceful with them. If I was in your situation, the right thing to respond would be to turn the blame on them for not electrocuting it properly. Just remember that the customer is always right, they normall let up after a good fifteen to twenty minutes.
Click to expand...
Click to collapse
Thanks mate I'll try that but I doubt I'll be given a replacement since I've gone through 7 repairs and 3 replacement handsets. HTC customer service really does suck!

Somebody's had a tonne and a half of bad luck. I've had this one a year, and the only thing that has ever broken on it was the SD card (and that was my fault, and I repaired that myself anywhore). I suppose you'll just have to get a case and get on with it to be honest.

kylepont said:
Somebody's had a tonne and a half of bad luck. I've had this one a year, and the only thing that has ever broken on it was the SD card (and that was my fault, and I repaired that myself anywhore). I suppose you'll just have to get a case and get on with it to be honest.
Click to expand...
Click to collapse
Yeah well all the problems started when tried doing a supercid on my phone which failed. I then sent it in for repair and ever since then its been a nightmare

kylepont said:
Somebody's had a tonne and a half of bad luck. I've had this one a year, and the only thing that has ever broken on it was the SD card (and that was my fault, and I repaired that myself anywhore). I suppose you'll just have to get a case and get on with it to be honest.
Click to expand...
Click to collapse
You do mean anyhow

kylepont said:
anywhore
Click to expand...
Click to collapse
usaff22 said:
You do mean anyhow
Click to expand...
Click to collapse
That's becoming an unhealthy habit of mine, I almost wrote that in my English exam in January...

Those don't look like MAO chips. I think it's just dust/powder that's stuck to the MAO. Have you tried wiping it with a soft damp cloth?

djsubtronic said:
Those don't look like MAO chips. I think it's just dust/powder that's stuck to the MAO. Have you tried wiping it with a soft damp cloth?
Click to expand...
Click to collapse
Yes I've tried wiping it with a damp cloth but it doesn't do anything

lonegunman0 said:
Yes I've tried wiping it with a damp cloth but it doesn't do anything
Click to expand...
Click to collapse
That sucks. From my experience your only solution is to buy a replacement housing and swap it. I can understand your reluctance though, as the phone is so new. You'll learn to live with it in time, I'm sure.

djsubtronic said:
That sucks. From my experience your only solution is to buy a replacement housing and swap it. I can understand your reluctance though, as the phone is so new. You'll learn to live with it in time, I'm sure.
Click to expand...
Click to collapse
This is only the minor issue. Ever since I got my original handset replaced by HTC it seems to show these large block pixels which are most visible when I'm watching videos on Youtube. Don't know whether anyone else has had this problem.