Hello,
I received my XT925 (UK version) yesterday, unlocked the bootloader, rooted, and installed TWRP v2.2.2.1. I am trying to flash Liquid Smooth v2.9 onto the phone however it has been stuck on "Verifying filesystems" for over 20 minutes, is this normal? I did a factory reset but didnt format system as i understood the rom formats it anyway. Should I still wait for it to finish verifying or is there something else i should do?
Many thanks in advance.
rjhellel said:
Hello,
I received my XT925 (UK version) yesterday, unlocked the bootloader, rooted, and installed TWRP v2.2.2.1. I am trying to flash Liquid Smooth v2.9 onto the phone however it has been stuck on "Verifying filesystems" for over 20 minutes, is this normal? I did a factory reset but didnt format system as i understood the rom formats it anyway. Should I still wait for it to finish verifying or is there something else i should do?
Many thanks in advance.
Click to expand...
Click to collapse
Not sure if this would help but I would update my recovery I flashed with Twrp 2.6.0.0 without issue
Sent from my Nexus 7 using Tapatalk 2
jmcdonald58 said:
Not sure if this would help but I would update my recovery I flashed with Twrp 2.6.0.0 without issue
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply. I managed to fix the problem but ended up installing Xenon HD which seems to be working great for now. I'll update TWRP anyway. Thanks again.
Related
I am having trouble, and since I cant post on the page where this should be asked. (this is my first post) I am asking here hoping that somebody will look...
I have rooted my verizon S3 and it works great... I am however trying to install a CM10 Rom on my device. I have followed the instructions and get all the way to selecting the zip on the sdcard. it finds it, it opens it and after about 20 seconds it gives me a status 7 error and says error in XXXXXX\XXXXX .zip
I have done all the steps perfectly and have formatted and wiped it twice trying this... I even have my backup in place...
I have tried 3 or 4 different cm10 roms and they all give me the same error... What am i over looking?
Thanks
I think you need to flash a CWM/kexec hybrid recovery.
Download the app EZ Recovery and flash the hybrid CWM 6.0.1.0
Sent from my SCH-I535 using Tapatalk 2
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
DROID3R said:
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
Click to expand...
Click to collapse
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
kwiksilvr said:
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
Click to expand...
Click to collapse
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Marcismo55 said:
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
You could always Odin back to stock then re-root and install cwm again and restore your backup. May be an easier way not sure. But back up your files on a PC if you do that.
Sent from my SCH-I535 using xda app-developers app
kwiksilvr said:
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
Click to expand...
Click to collapse
I don't know how you are blaming me when I specifically told you to flash a ClockworkMod/Kexec recovery... not TWRP.
Seems your issue is lack of following directions. Good luck on solving your issue.
Sent from my SCH-I535 using Tapatalk 2
I am having problems flashing Clean Inheritance Rom 4.1 and I believe my TWRP 2.4.4.0 may be the problem because it seems corrupted.
I followed the instructions on this thread. http://forum.xda-developers.com/showthread.php?t=2187982
So far I have been able to flash the patched twrp 2.4.4.0 and install the Asus stock 4.2.1 but every time I try to flash CROM 4.1 twrp will initiate updating partition and then it will just restart w/o warning to its home screen. I think that my twrp may be corrupted but i have used fastboot to repush the twrp multiple times and the asus stock 4.2.1 multiple times but this is not solving my issue. I see that fastboot has a erase command and wanted to know if i would use that to erase the recovery img completely and then try flashing twrp again to see if this resolves the issue or will the erase command brick my device? Also do I need to have my stock kernel for the CROM 4.1 to work? I am attaching screenshot of my tablet info, please let me know if more info is needed or if i need to upload a video of what is going on thanks.
have you redownloaded twrp mate it might have been a dodgy download or maybe a bad download of cromi, or you could try installing cromi 4.0 first
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
robgee789 said:
have you redownloaded twrp mate it might have been a dodgy download or maybe a bad download of cromi, or you could try installing cromi 4.0 first
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Thanks robgee for the response, I have tried downloading the twrp patch and crom 4.0 and 4.1 but I am still having the same issue. Is there a way to flash CROM 4.1 without using twrp?
Hi Williams,
I'm also facing the same as you, and still searching for an answer. Tried flashing the SuperSU patch and my tablet is still not rooted.
Running the WW version. Wonder if anyone can help us....
What OS are you using?
xgrind said:
Hi Williams,
I'm also facing the same as you, and still searching for an answer. Tried flashing the SuperSU patch and my tablet is still not rooted.
Running the WW version. Wonder if anyone can help us....
Click to expand...
Click to collapse
I am still having issues but I am using Windows 8. Are you using Windows 8 as well?
im using windows 7 but i dont know if that has anything to do with it
No, im using Windows 7
williams2657 said:
I am still having issues but I am using Windows 8. Are you using Windows 8 as well?
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Update! bump please help someone
I am still having issues installing clean rom 4.1 but I noticed that if I keep selecting to flash the CROM 4.1 or 4.0 rom it will eventually initiate and let me choose the options and actually start flashing but once it says it is complete and i reboot it does not boot CROM just gets stuck at the asus boot screen. Then i must use fastboot to flash the stock android 4.2.1 to get the thing up and running and then twrp pretty much breaks after i use fastboot to flash teh android 4.2.1 blob file so I have to reflash the patched 2.4.4.0 again. I really do think the problem is with twrp because ever since this new 2.4.4.0 update i have been having issues i remember before twrp was a great utility but now it seems like it is a nightmare is there a way from me to try flashing crom 4.1 with clockwork mod yet?
williams2657 said:
I am still having issues installing clean rom 4.1 but I noticed that if I keep selecting to flash the CROM 4.1 or 4.0 rom it will eventually initiate and let me choose the options and actually start flashing but once it says it is complete and i reboot it does not boot CROM just gets stuck at the asus boot screen. Then i must use fastboot to flash the stock android 4.2.1 to get the thing up and running and then twrp pretty much breaks after i use fastboot to flash teh android 4.2.1 blob file so I have to reflash the patched 2.4.4.0 again. I really do think the problem is with twrp because ever since this new 2.4.4.0 update i have been having issues i remember before twrp was a great utility but now it seems like it is a nightmare is there a way from me to try flashing crom 4.1 with clockwork mod yet?
Click to expand...
Click to collapse
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
evo bryan said:
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
Click to expand...
Click to collapse
I haven't tried that yet, I will try and let you know. Thanks for the response.
I did try to flash the SuperSU zip to root the stock rom. Able to flash in the SuperSU but still not rooted
evo bryan said:
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
I was able to flash SuperSU as well
I was able to flash SuperSU and it was confirmed rooted with root checker. I still don't know why CleanROM will not work I have downloaded the ROM multiple times but it just refuses to flash is there something else I need to check in order to flash the rom or is TWRP partially broken where it can only flash very small simple files but not a complete custom rom?
I just downloaded the energy rom and tried to flash it do my device and ended up having the same issue. It says the rom has been flashed and completes but after reboot it is just stuck on Asus bootscreen and never boots into the OS. What the hell is going on
I think my bootloader is somehow screwed up because it can't boot any custom roms it can only boot the asus stock 4.2.1 when i flash the blob file using fastboot. Did i miss a step or something to allow the bootloader to boot custom roms
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
I'm using the WW version and has the same problem
robgee789 said:
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2
Update
robgee789 said:
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
xgrind said:
I'm using the WW version and has the same problem
Sent from my iPhone using Tapatalk 2
Click to expand...
Click to collapse
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Hi William,
Hope to hear good news
williams2657 said:
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2
williams2657 said:
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Click to expand...
Click to collapse
any news and just so you know clean rom just got updated
Yesterday tried again,
Still no luck. Anyone can share the link to patched TWRP for me to try again?
evo bryan said:
any news and just so you know clean rom just got updated
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2
I ran the causal root applet on a new SG3 on 4.1.2. Ran root, the unlock script and installed TWRP. Booted into recovery and I got the error for a locked bootloader. I used download mode to get back to the stock rom and then used E-Z unlock to unlock the bootloader. Was able to boot into recovery this time but TWRP read internal and external memory as 0mb, unable to make a backup, and gave a no OS error when went to reboot. I updated TWRP with TWRP manager but the problems are still persistent. Phone boots fine and reboots fine at the moment.
I'm not sure what to do now though. I'm at the point were I don't care if I get stuck with the OTA update but I'm afraid that will brick the phone. I'm not sure what went wrong with TWRP, since this is the second S3 I've rooted.
Any sugestions? I'm afraid to use odin or try anything else since the phone currently works fine. But I'd prefer to not have to sleep in fear it might force the OTA update while I'm asleep and wake up to a bricked phone.
I tried searching, the best I could find is that newer versions of TWRP can't read the memory on a 4.1.2 rom, but the problems were there when I originally started with the recommended version.
Thanks for any help anyone can give.
Try to use cwm or philz and see if you have the same issue.
Sent from my SCH-I535 using Tapatalk 2
Xx
BadUsername said:
Try to use cwm or philz and see if you have the same issue.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Can you install a different custom recovery over one using the causal applet? I was planning on trying to reinstall TWRP but I wasn't sure if I had to do it a certain way like through odin or Using the unified tool kit?
Thanks for the help so far!
Smogon said:
Can you install a different custom recovery over one using the causal applet? I was planning on trying to reinstall TWRP but I wasn't sure if I had to do it a certain way like through odin or Using the unified tool kit?
Thanks for the help so far!
Click to expand...
Click to collapse
No.
Download latest philz touch recovery d2lte zip, then flash it in recovery, then reboot recovery.
Then check and see if you're getting a similar error message.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
No.
Download latest philz touch recovery d2lte zip, then flash it in recovery, then reboot recovery.
Click to expand...
Click to collapse
I can't, recovery doesn't detect my internal or external memory. That's my main issue.
Smogon said:
I can't, recovery doesn't detect my internal or external memory. That's my main issue.
Click to expand...
Click to collapse
OK.
Then download the Odin version and flash through that. Then boot the phone into recovery.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
OK.
Then download the Odin version and flash through that. Then boot the phone into recovery.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'll try the second option, Thanks!
BadUsername said:
OK.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I tried CWM and the stock recovery through EZ, both gave the same error as TWRP, unable to mount /
I'm really confused as to whats wrong. At this point I don't care if I get stuck with the OTA 4.3, but I don't want to try to update it with the recovery still not reading either my SD cards.
Any Ideas?
Are you sure of your phone model? I believe it puts it on the screen in download mode and also on a sticker under the battery. I'm mostly curious because you mention that this is a new phone with 4.1.2. Are you trying older versions of cwm as well?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Smogon said:
I ran the causal root applet on a new SG3 on 4.1.2. Ran root, the unlock script and installed TWRP. Booted into recovery and I got the error for a locked bootloader. I used download mode to get back to the stock rom and then used E-Z unlock to unlock the bootloader. Was able to boot into recovery this time but TWRP read internal and external memory as 0mb, unable to make a backup, and gave a no OS error when went to reboot. I updated TWRP with TWRP manager but the problems are still persistent. Phone boots fine and reboots fine at the moment.
I'm not sure what to do now though. I'm at the point were I don't care if I get stuck with the OTA update but I'm afraid that will brick the phone. I'm not sure what went wrong with TWRP, since this is the second S3 I've rooted.
Any sugestions? I'm afraid to use odin or try anything else since the phone currently works fine. But I'd prefer to not have to sleep in fear it might force the OTA update while I'm asleep and wake up to a bricked phone.
I tried searching, the best I could find is that newer versions of TWRP can't read the memory on a 4.1.2 rom, but the problems were there when I originally started with the recommended version.
Thanks for any help anyone can give.
Click to expand...
Click to collapse
by any chance did u try to setup dualboot? I have a similar issue where nothing gets mounted and o mb for storage, .only receovery i get to work is cwm. im pretty sure its a partition issue but idk. i tried flashing pit files for my phone but so far the issue remains.
xevildoerxx said:
by any chance did u try to setup dualboot? I have a similar issue where nothing gets mounted and o mb for storage, .only receovery i get to work is cwm. im pretty sure its a partition issue but idk. i tried flashing pit files for my phone but so far the issue remains.
Click to expand...
Click to collapse
No I just used the causal tool.
dpeeps74 said:
Are you sure of your phone model? I believe it puts it on the screen in download mode and also on a sticker under the battery. I'm mostly curious because you mention that this is a new phone with 4.1.2. Are you trying older versions of cwm as well?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm pretty sure, has all the verizon bloat and logos, also I'm pretty sure the causal applet bricks the international ones. I don't remember the version of twrp that the causal script flashed, but I tried that one, the most recent one, and 2.5 i think from EZ recovery. The stock recovery from EZ has the same issue now though which is what really confuses me. at the moment I have root dissabled and the bootloader is locked and its back with the stock recovery, it still says custom when i reboot the phone though.
I have a Verizon Galaxy S3 with an unlocked bootloader. I am having trouble restoring the backups i have made. Everytime i try to restore one it goes to boot but hangs on the boot logo. I have tried clearing cache, delvac cache, data, factory reset. Can someone please help me. I have ClockWordMod custom recovery installed.
Datboi459 said:
I have a Verizon Galaxy S3 with an unlocked bootloader. I am having trouble restoring the backups i have made. Everytime i try to restore one it goes to boot but hangs on the boot logo. I have tried clearing cache, delvac cache, data, factory reset. Can someone please help me. I have ClockWordMod custom recovery installed.
Click to expand...
Click to collapse
Have you tried using another recovery?
Sent from my Optipop N5
ShapesBlue said:
Have you tried using another recovery?
Sent from my Optipop N5
Click to expand...
Click to collapse
I just installed Twrp 2.8.6.0 and i backed up the latest LiquidSmooth nightly and it worked without a problem. Looks like i am now a Twrp fan Thanks for your help!!
Datboi459 said:
I just installed Twrp 2.8.6.0 and i backed up the latest LiquidSmooth nightly and it worked without a problem. Looks like i am now a Twrp fan Thanks for your help!!
Click to expand...
Click to collapse
Not a problem. I've tried nearly all the recovery options. I have settled on TWRP as my favorite. Glad I could help!!
Sent from my Optipop N5
hey guys i just tried to update to 5.1 from 4.4.4 gpe I flashed the ruu first and reinstalled my recovery backed up and installed digitalhigh gpe 5.1 when it finally booted my wifi wasnt working so I rebooted and now it just bootloops into fast boot and I cant get into twrp
Bierce22 said:
hey guys i just tried to update to 5.1 from 4.4.4 gpe I flashed the ruu first and reinstalled my recovery backed up and installed digitalhigh gpe 5.1 when it finally booted my wifi wasnt working so I rebooted and now it just bootloops into fast boot and I cant get into twrp
Click to expand...
Click to collapse
I am having the exact same problem, except my phone wasn't rooted prior. All stock.
Bierce22 said:
hey guys i just tried to update to 5.1 from 4.4.4 gpe I flashed the ruu first and reinstalled my recovery backed up and installed digitalhigh gpe 5.1 when it finally booted my wifi wasnt working so I rebooted and now it just bootloops into fast boot and I cant get into twrp
Click to expand...
Click to collapse
Did you try manually flashing the boot img from dh's rom?
Sent from my Nexus 6 using Tapatalk
servo1975 said:
I am having the exact same problem, except my phone wasn't rooted prior. All stock.
Click to expand...
Click to collapse
Stock isn't gpe for vzw. If you are 100% stock look for my s-on ruu thread in general. It is a no wipe solution for you.
Sent from my Nexus 6 using Tapatalk