I ran the causal root applet on a new SG3 on 4.1.2. Ran root, the unlock script and installed TWRP. Booted into recovery and I got the error for a locked bootloader. I used download mode to get back to the stock rom and then used E-Z unlock to unlock the bootloader. Was able to boot into recovery this time but TWRP read internal and external memory as 0mb, unable to make a backup, and gave a no OS error when went to reboot. I updated TWRP with TWRP manager but the problems are still persistent. Phone boots fine and reboots fine at the moment.
I'm not sure what to do now though. I'm at the point were I don't care if I get stuck with the OTA update but I'm afraid that will brick the phone. I'm not sure what went wrong with TWRP, since this is the second S3 I've rooted.
Any sugestions? I'm afraid to use odin or try anything else since the phone currently works fine. But I'd prefer to not have to sleep in fear it might force the OTA update while I'm asleep and wake up to a bricked phone.
I tried searching, the best I could find is that newer versions of TWRP can't read the memory on a 4.1.2 rom, but the problems were there when I originally started with the recommended version.
Thanks for any help anyone can give.
Try to use cwm or philz and see if you have the same issue.
Sent from my SCH-I535 using Tapatalk 2
Xx
BadUsername said:
Try to use cwm or philz and see if you have the same issue.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Can you install a different custom recovery over one using the causal applet? I was planning on trying to reinstall TWRP but I wasn't sure if I had to do it a certain way like through odin or Using the unified tool kit?
Thanks for the help so far!
Smogon said:
Can you install a different custom recovery over one using the causal applet? I was planning on trying to reinstall TWRP but I wasn't sure if I had to do it a certain way like through odin or Using the unified tool kit?
Thanks for the help so far!
Click to expand...
Click to collapse
No.
Download latest philz touch recovery d2lte zip, then flash it in recovery, then reboot recovery.
Then check and see if you're getting a similar error message.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
No.
Download latest philz touch recovery d2lte zip, then flash it in recovery, then reboot recovery.
Click to expand...
Click to collapse
I can't, recovery doesn't detect my internal or external memory. That's my main issue.
Smogon said:
I can't, recovery doesn't detect my internal or external memory. That's my main issue.
Click to expand...
Click to collapse
OK.
Then download the Odin version and flash through that. Then boot the phone into recovery.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
OK.
Then download the Odin version and flash through that. Then boot the phone into recovery.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'll try the second option, Thanks!
BadUsername said:
OK.
Or download ez recovery, and the latest cwm image file, and flash through that from your rom.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I tried CWM and the stock recovery through EZ, both gave the same error as TWRP, unable to mount /
I'm really confused as to whats wrong. At this point I don't care if I get stuck with the OTA 4.3, but I don't want to try to update it with the recovery still not reading either my SD cards.
Any Ideas?
Are you sure of your phone model? I believe it puts it on the screen in download mode and also on a sticker under the battery. I'm mostly curious because you mention that this is a new phone with 4.1.2. Are you trying older versions of cwm as well?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Smogon said:
I ran the causal root applet on a new SG3 on 4.1.2. Ran root, the unlock script and installed TWRP. Booted into recovery and I got the error for a locked bootloader. I used download mode to get back to the stock rom and then used E-Z unlock to unlock the bootloader. Was able to boot into recovery this time but TWRP read internal and external memory as 0mb, unable to make a backup, and gave a no OS error when went to reboot. I updated TWRP with TWRP manager but the problems are still persistent. Phone boots fine and reboots fine at the moment.
I'm not sure what to do now though. I'm at the point were I don't care if I get stuck with the OTA update but I'm afraid that will brick the phone. I'm not sure what went wrong with TWRP, since this is the second S3 I've rooted.
Any sugestions? I'm afraid to use odin or try anything else since the phone currently works fine. But I'd prefer to not have to sleep in fear it might force the OTA update while I'm asleep and wake up to a bricked phone.
I tried searching, the best I could find is that newer versions of TWRP can't read the memory on a 4.1.2 rom, but the problems were there when I originally started with the recommended version.
Thanks for any help anyone can give.
Click to expand...
Click to collapse
by any chance did u try to setup dualboot? I have a similar issue where nothing gets mounted and o mb for storage, .only receovery i get to work is cwm. im pretty sure its a partition issue but idk. i tried flashing pit files for my phone but so far the issue remains.
xevildoerxx said:
by any chance did u try to setup dualboot? I have a similar issue where nothing gets mounted and o mb for storage, .only receovery i get to work is cwm. im pretty sure its a partition issue but idk. i tried flashing pit files for my phone but so far the issue remains.
Click to expand...
Click to collapse
No I just used the causal tool.
dpeeps74 said:
Are you sure of your phone model? I believe it puts it on the screen in download mode and also on a sticker under the battery. I'm mostly curious because you mention that this is a new phone with 4.1.2. Are you trying older versions of cwm as well?
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm pretty sure, has all the verizon bloat and logos, also I'm pretty sure the causal applet bricks the international ones. I don't remember the version of twrp that the causal script flashed, but I tried that one, the most recent one, and 2.5 i think from EZ recovery. The stock recovery from EZ has the same issue now though which is what really confuses me. at the moment I have root dissabled and the bootloader is locked and its back with the stock recovery, it still says custom when i reboot the phone though.
Related
I am having trouble, and since I cant post on the page where this should be asked. (this is my first post) I am asking here hoping that somebody will look...
I have rooted my verizon S3 and it works great... I am however trying to install a CM10 Rom on my device. I have followed the instructions and get all the way to selecting the zip on the sdcard. it finds it, it opens it and after about 20 seconds it gives me a status 7 error and says error in XXXXXX\XXXXX .zip
I have done all the steps perfectly and have formatted and wiped it twice trying this... I even have my backup in place...
I have tried 3 or 4 different cm10 roms and they all give me the same error... What am i over looking?
Thanks
I think you need to flash a CWM/kexec hybrid recovery.
Download the app EZ Recovery and flash the hybrid CWM 6.0.1.0
Sent from my SCH-I535 using Tapatalk 2
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
DROID3R said:
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
Click to expand...
Click to collapse
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
kwiksilvr said:
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
Click to expand...
Click to collapse
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Marcismo55 said:
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
You could always Odin back to stock then re-root and install cwm again and restore your backup. May be an easier way not sure. But back up your files on a PC if you do that.
Sent from my SCH-I535 using xda app-developers app
kwiksilvr said:
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
Click to expand...
Click to collapse
I don't know how you are blaming me when I specifically told you to flash a ClockworkMod/Kexec recovery... not TWRP.
Seems your issue is lack of following directions. Good luck on solving your issue.
Sent from my SCH-I535 using Tapatalk 2
I tried to install this > [ROM][VRBLK3][4.1.1][RLS10] GalaxyMod ¯`•._ The New Transmission - xda-developers but when it finished it said I had unauthorized software on my phone so I figured I'd do a stock restore back to 4.0.4. When I did this and rooted the phone after it did the 2 software updates to IMM76D.I535VRALHE I installed root and Rom Manager. However this time I get no choices in Rom Manager. It only shows my Galaxy S3 phone and shows unsupported. I've done this restore and recover numinous times before with no issues now Rom Manager is acting up and will not let me select any phone. The list just shows 1 phone which is mine that's unsupported. How can I Fix this? I need to restore my backup rom I created with CWM. Urgent Help is requested. Thanks!
Boot into cwm manually by powering down then holding volume up, home and power
Then there's an option for backup restore
Sent from my SCH-I535
It won't install the recovery so I get the stock recovery each time I try that.. When it lists the phones to install the recovery it only shows my 1 phone instead of showing all the available phones like it's supposed too. When I did this before it would show me about 20 phones and all 4 Galaxy Phones on each network now it shows nothing but my unsupported phone.
Download ez recovery and use that to install the recovery.
Sent from my SCH-I535
kintwofan said:
Download ez recovery and use that to install the recovery.
Sent from my SCH-I535
Click to expand...
Click to collapse
Will that allow me to install CWM. I really like it?
DarkMenace said:
Will that allow me to install CWM. I really like it?
Click to expand...
Click to collapse
Yes it does. I use cwm myself.
Sent from my SCH-I535
kintwofan said:
Download ez recovery and use that to install the recovery.
Sent from my SCH-I535
Click to expand...
Click to collapse
kintwofan said:
Yes it does. I use cwm myself.
Sent from my SCH-I535
Click to expand...
Click to collapse
The problem is my CWM is showing the following and I would much rather use it but it won't let me no matter what I try!
SCH-I535 does not have an offcially supported ClockworkMod Recovery yet. Have you installed a ClockworkMod based recovery manually?
Have you cleared app data? Besides that I don't know must people use ez recovery. The people I've seen use ROM manager usually have problems. All either of them do is install cwm recovery on your phone.
Sent from my SCH-I535
I did a forced recovery install from the advanced menu so now I'm in the Rom Manager recovery menu restoring my nandroid backup. Maybe this will fix my Rom Manager since it restores everything I assume? Maybe after it's done I will see the Verizon Galaxy S3 as an option in Rom Manager?
Nope, still shows unsupported. Did they do an update or something. This is sort of retarded! If I do a manual and view all recoveries I see the Galaxy S3. What gives with that? It still won't flash it though.
Guess I'll get used to EZ Recovery until CWM is fixed. Thanks. Unless anyone else knows how to fix the issue.
Just rooted and s-off a replacement one S. Everything went fine until i got to the point i was going to flash a rom. Ive been using the viper rom. after starting the installer it seemed out that all it did was format the memory. After it finished it rebooted and stayed on the HTC splash screen for probably twenty minutes before i did a hard boot. after getting back into recovery and trying again it did the same thing. i decided to just start over and do reboot from recovery but it is saying there is no OS. so i went back to view my card from recovery and everything on it was erased. Now im trying to copy the viper rom back over via recovery but the transfer speed is down to about 50kbps and keeps saying its timing out. any ideas
What recovery are u using? I read several times, that ViperRom and the latest twrp don't fit. In case of using twrp u should try an older version.
Sent from my HTC One S using xda app-developers app
customromfan said:
What recovery are u using? I read several times, that ViperRom and the latest twrp don't fit. In case of using twrp u should try an older version.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
I guess i was using the twrp with that all in one toolkit i would switch to cwm but i cant get my computer now to reconigze the phone. i keep getting the htc mtp driver issue and haven't been able to figure it out. I figured if i can get the other recovery installed i should be able to flash a os
Jayster06 said:
I guess i was using the twrp with that all in one toolkit i would switch to cwm but i cant get my computer now to reconigze the phone. i keep getting the htc mtp driver issue and haven't been able to figure it out. I figured if i can get the other recovery installed i should be able to flash a os
Click to expand...
Click to collapse
go into bootloader, then fastboot usb mode.
the flash the new recovery via fastboot command, or with the all in one toolkit (chose custom, then locate your file)
i switched over to cwm and tried copying a viper rom to my phone but it keeps erroring out during the transfer. I tried a smaller rom and it copied over but all its doing with i click install is going to a black screen then back to cwm
i also tried several other roms that were smaller in size and it was doing the same thing
I updated to MF1, and it changed my recovery from ClockWork Touch to a much more basic recovery mode (rom manager says CWR and TWRP are both installed). I tried to flash basic clockwork using rom manager and as it reboot I got a message saying "software not authorized" and it would not boot.
I just used ODIN to flash the VRALEC boot chain which allowed the phone to boot. I still seem to have still have MF1. Step 6 here http://forum.xda-developers.com/showthread.php?t=2046439 says to then install the correct boot chain, but i dont see one for MF1 yet.
I then tried ODIN to flash CWR from the the above post with the same results (had to re odin vralec).
1. Should I ODIN the VRBMD3 boot chain in the mean time?
2. How do I get ClockWork Recover for MF1, touch or regular?
blindguyinanorgy said:
I updated to MF1, and it changed my recovery from ClockWork Touch to a much more basic recovery mode (rom manager says CWR and TWRP are both installed). I tried to flash basic clockwork using rom manager and as it reboot I got a message saying "software not authorized" and it would not boot.
I just used ODIN to flash the VRALEC boot chain which allowed the phone to boot. I still seem to have still have MF1. Step 6 here http://forum.xda-developers.com/showthread.php?t=2046439 says to then install the correct boot chain, but i dont see one for MF1 yet.
I then tried ODIN to flash CWR from the the above post with the same results (had to re odin vralec).
1. Should I ODIN the VRBMD3 boot chain in the mean time?
2. How do I get ClockWork Recover for MF1, touch or regular?
Click to expand...
Click to collapse
1. No, you don't have to change the bootchain. Vralec is just an old ics bootchain and should run fine.
2. http://forum.xda-developers.com/showthread.php?t=2096735
Use ez recovery to flash the most recent CWM recovery, touch or non-touch should both work great. Don't use rom manager anymore until it's updated, that's the second report I've seen of it doing that.
Sent from my SCH-I535 using Tapatalk 2
Did you ota to mf1 by any chance? Im pretty sure your boot loader was relocked.
Sent from my SCH-I535 using xda premium
Watoy said:
Did you ota to mf1 by any chance? Im pretty sure your boot loader was relocked.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I did OTA. I can still get into recovery, it is just not CWR.
BadUsername said:
1. No, you don't have to change the bootchain. Vralec is just an old ics bootchain and should run fine.
2. http://forum.xda-developers.com/showthread.php?t=2096735
Use ez recovery to flash the most recent CWM recovery, touch or non-touch should both work great. Don't use rom manager anymore until it's updated, that's the second report I've seen of it doing that.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
EZ-Recovery worked, but i also think i did something different inside CWR. It asked me if I wanted to disable something and this time I said yes.
blindguyinanorgy said:
EZ-Recovery worked, but i also think i did something different inside CWR. It asked me if I wanted to disable something and this time I said yes.
Click to expand...
Click to collapse
Good, if you say no it'll reinstall the stock recovery and you don't want that. The recovery you were seeing is the stock recovery, very basic with the hardly any options.
Sent from my SCH-I535 using Tapatalk 2
Hi guys,
3 days ago I had root but softbricked by installing hyperdrive when "I thought" I unlocked via ez-unlock but I guess that didn't take. Tried to restore back to stock but couldn't, I lost access to CWM and Odin nor Heimdall (Mac, Linux and Windows) didn't like my phone in 3 computers using 3 different cables.
But from continuous failed/incomplete/partial flashes, CWM is miraculously back! So that's like my only glimmer of hope right now. So my question is could I get back to stock or any rom from flashing something from CWM? Could I get ANY kind of ROM running again, could I root again, unlock bootloader and install new rom via CWM.. Basically can I fix my phone from CWM? Or is the only way back to any rom is via stock via Odin/Heimdall?
PLEASE HELP.
ojpd said:
Hi guys,
3 days ago I had root but softbricked by installing hyperdrive when "I thought" I unlocked via ez-unlock but I guess that didn't take. Tried to restore back to stock but couldn't, I lost access to CWM and Odin nor Heimdall (Mac, Linux and Windows) didn't like my phone in 3 computers using 3 different cables.
But from continuous failed/incomplete/partial flashes, CWM is miraculously back! So that's like my only glimmer of hope right now. So my question is could I get back to stock or any rom from flashing something from CWM? Could I get ANY kind of ROM running again, could I root again, unlock bootloader and install new rom via CWM.. Basically can I fix my phone from CWM? Or is the only way back to any rom is via stock via Odin/Heimdall?
PLEASE HELP.
Click to expand...
Click to collapse
So confusing....
Ok, so you're on a stock rom right now and you have cwm installed? You must have some type of root enabled, do you have supersu or superuser installed? If you don't you need to install one from the playstore.
If you have cwm, then all you need to do is use ez unlock to unlock your bootloader then you can flash away. Use version 1.2, you likely used 1.4 which doesn't always work.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
So confusing....
Ok, so you're on a stock rom right now and you have cwm installed? You must have some type of root enabled, do you have supersu or superuser installed? If you don't you need to install one from the playstore.
If you have cwm, then all you need to do is use ez unlock to unlock your bootloader then you can flash away. Use version 1.2, you likely used 1.4 which doesn't always work.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm really sorry about the confusion.
I came from a stock rooted, "unlocked" rom, it had CWM touch installed. Then I tried to install Hyperdrive.. Install went well via aroma.. But after reboot I got the verizon unauthorized error and I lost access to CWM Touch but I could go into download mode... Now here's where the confusion starts...
I tried to flash back to stock via Odin. Each and every single time it failed after a few files. Believe me I looked for a solution as in several solutions all of which failed until my last flash which also failed but installed a few more files before it failed and I dunno I got CWM Touch back.
Hence the reason why I'm asking if I could fix my phone via CWM because Odin is crazy and Heimdall is also picky.
ojpd said:
I'm really sorry about the confusion.
I came from a stock rooted, "unlocked" rom, it had CWM touch installed. Then I tried to install Hyperdrive.. Install went well via aroma.. But after reboot I got the verizon unauthorized error and I lost access to CWM Touch but I could go into download mode... Now here's where the confusion starts...
I tried to flash back to stock via Odin. Each and every single time it failed after a few files. Believe me I looked for a solution as in several solutions all of which failed until my last flash which also failed but installed a few more files before it failed and I dunno I got CWM Touch back.
Hence the reason why I'm asking if I could fix my phone via CWM because Odin is crazy and Heimdall is also picky.
Click to expand...
Click to collapse
So you can get into download mode just fine? You need to use a better USB cable and try a different port on your computer. It should be able to flash, but if you're using a lower quality cable than what came with the phone it might be your issue.
This guide should work if you can't get a normal flash back to stock work:
http://forum.xda-developers.com/showthread.php?t=1840030
Basically, the only other way I know of to go back to stock without a pc is to use mobile Odin, but that needs root access. There's no file you can flash in recovery to go completely back to stock as it will still leave you with a custom recovery installed.
Sent from my SCH-I535 using Tapatalk 2
I finally got into my rom, after flashing the first boot chain (vralec) Odin messed up again, couldn't flash the 2nd one nor root66 so I pulled my batt and I guess the first vralec gave me stock recovery n just let me boot into my rom, installed twrp and ez unlock 1.2 from there, rebooted into twrp and then installed TkROM.
Thanks for all the help.
Sent from my SCH-I535 using xda app-developers app
Glad it worked out, and nice rom choice.
Sent from my SCH-I535 using Tapatalk 2