Database Info

ST21i can not turn on

Hi All,
I rooted my tipo a month ago with "Bin4ry_v17" script, and it works fine for me
yesterday at some point during the day my phone just switch off
Ok, I thought the battery is discharged than I try to charging, but nothing happend (no red led light)
I try to switch it on but
1, phone vibrate once and nothing else
or
2, red led blinking three times and nothing else ..
I try to connect it to my laptop via USB (holding SND down) therefore green led starting to lightuntil I pull off the USB cable.
So If anybody can tell me some comforting words about my phone I will respect
Can I switch on anyway this phone ?
Regards,
Andrew

Do u have flashtool get it from google
Get ftf file from teammex's link
U will get a guide with flashtool install all drivers
Connect device as u did earlier and flash the ftf file
REMEMBER GET FTF FILE OF YOUR DEVICE ONLY IF U FLASH IT WRONG REFLASH RIGHT ONE root it like earlier then get CWM recovery make back up if there is a problem in flashing share your flashtool log
Sent from my ST21i using xda app-developers app

Sry 4 all, i was so impatient, after i wrote this, i run the process again and go to take a smoke, so when i back my phone switched on.
Sent from my ST21i using xda app-developers app

haades said:
Sry 4 all, i was so impatient, after i wrote this, i run the process again and go to take a smoke, so when i back my phone switched on.
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
You smoke good stuff then.
Sent from my ST27i

Can i unlock bootloader in bricked stage
I have a bticked tipo and just want to ask if i can unlock bootloader in the bricked stage
and also cani flash without unlocking boot loader

You can flash ftf files with locked bootloader. But if you have locked bootloader you can use sus or pcc
Sent from my LT18i using xda premium

Xperia pro won't go intő flashmode

I have bought an xperia pro which is working and has ICS on it but, ics sucks on the 2011 line-up... So, I wanted to flash it back with flashtool to .58 firmware with flashtool what I have done on my other xperia thousand times, BUT,
When I connect it to the computer while pushing back button, the green light wont come up, and the computer just say (sometimes) "ZEUS flash tool" connected, also it won't go into fast mode either. The phone actually works but I have no clue what to do, anzone can help me?
Sent from my MK16i using xda app-developers app

[Q] Root + Firmware 2.17

Hi!
I have one C2104 and the device has a problem with Wifi, he conects and disconects after 3 minutes.
So i read some tutorial and updated de firmware to 2.17 version INDIA with the flashtool. And it worked, my wifi works fine.
And i rooted the device with these metod;
PART B(PARTIAL ROOT):-
1. Connect the phone in debugging mode via USB. To enable debugging mode, go to Settings => Development => Check "USB Debugging".
2. Wait for the drivers to install. Happens automatically on Windows 7 and Windows 8.
3. Download the zip file below and extract it.
4. After extracting, run "Run.bat". Admin rights usually not needed.
5. Follow On-Screen instructions.
6. Root complete.
And i tryed 3 times and it worked, now im using Setcpu and Greenify.
My question is: After i maked that stuff in my phone, I'll still get the updates via the PC companion and the update via phone?
My second question, after a imake root in the camera app now has a black stripe on the buttons to take the picture. Only when i'm using the 8MP relotion. This is normal?
Sorry for my english.
Thaks.

You'll be able to update phone without any problem but you'll lose root afterwards.
I don't have a clue about the camera thingy.
Try to reboot?
Regards,
Ishaan
Sent from my C2104 using xda app-developers app

I already booted the device 5 times. This is strange.

Why did you flash the India .17?

getochkn said:
Why did you flash the India .17?
Click to expand...
Click to collapse
I installed the Indian version because the version that comes with the unit (I live in Brazil) was in trouble in Wi-Fi that disconnected every 3 minutes.
*
So I installed this version (C2104_15.0.A.2.17_India) and she corrected this problem. I could not be installed because the Indian version?

The black stripe in the camera app is there because of the used chip. When you set your camera to take 8MPX pictures, the ratio change's from 16:9 to 4:3....

Try Your Luck to Get back your Tipo/Miro/E

hi all,
In most of Q/A thread of tipo/miro , i have seen that people are facing trouble after unlocking bootloader and get therir device bricked. so here, after some research ,i have mentioned notes that they should have try to get their tipo if possible.may be it will help
-Notes
-Change USB Port & USB Cable and Make Sure driver is installed Correctly
-Sometimes it looks like hardbrciked but it is not,so check that is there any vibration/LED sign while trying to turn on device
-Remove sd-card and SIM ,put your device in charging for 24 hours ,there is a little hope to get RED LED after
-Try External Charger and Charge your battery for long time & Connect your device without battery by holding volume down button and insert battery. It may detect your device on flashtool
-If you get LED Then try to connect with flash/fastboot mode and flash stock rom or use PC companian/SUS after Relocking Bootloader.
IF ANYONE WATCHING THIS THREAD HAVING SOLVED THAT KIND OF ISSUE THEN PLZ SHARE YOUR EXPERIANCE TO HELP OTHERS.

that's when people get software problem. but with drivers or devices problem like dead boot, we need Sony
Sent from my ST23i using XDA Premium 4 mobile app

tit_xperiamiro said:
that's when people get software problem. but with drivers or devices problem like dead boot, we need Sony
Sent from my ST23i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
softbrick can easily get recover by flashtool
In Most Case of hardbrick Sony will charge for Motherboard
Sent from my ST21i using xda app-developers app

Problem-Xperia E Green LED & Vibration while turning On But not turning On
->For Solution Check Post By UltraGamerHD in this Thread http://forum.xda-developers.com/showthread.php?t=2577490
Sent from my ST21i using Tapatalk

[Xperia J] Flash Mode + Fastboot = 'USB Device Not Recognized'

Hello Everyone, So i have a Sony Xperia J Unlocked Boot Loader + Custom MIUI Rom, I wanted to go back to stock rom, but when i use flashtool and place my device on flashmode a green LED indicates on my device like usual but on my pc screen it says ' USB Device not Recognized' so now i can't flash stock ftf, is there any other way to get to stock rom or any way to resolve this problem?
(I have a 64-Bit Windows 8.1 Laptop)

First select ftf that you want to flash on Flashtool, wait for pop-up window that tells to connect your phone than connect your phone. If you have drivers installed and disabled drivers verification it should work.
Good Luck
Sent from my ST26i using Tapatalk

Dzepar said:
First select ftf that you want to flash on Flashtool, wait for pop-up window that tells to connect your phone than connect your phone. If you have drivers installed and disabled drivers verification it should work.
Good Luck
Sent from my ST26i using Tapatalk
Click to expand...
Click to collapse
Thank you for your time & for looking into my case, However i've managed to solve the issue, It was due to a fault Data Sync Cable I simply used the one for my S4 and it worked as normal.

Hussain_Salam said:
Thank you for your time & for looking into my case, However i've managed to solve the issue, It was due to a fault Data Sync Cable I simply used the one for my S4 and it worked as normal.
Click to expand...
Click to collapse
Your welcome. Glad you solved
Sent from my ST26i